api.logout() (POST /auth/logout) existed but was never called, leaving the
bearer token valid server-side after a client-local logout. Add a small
logout() helper that fires the revocation best-effort — fire-and-forget with
its rejection swallowed — then runs clearAuth() synchronously, so a slow,
offline, or rejecting server can never block or delay the local logout. Wire
it into the settings Log Out button. Tests pin both paths: logout is called,
and local logout still completes when the request rejects or never settles.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SidebarMemberSection read role name->id from a parallel roles.store that
nothing ever wrote to — only channels.store.setRoles is updated by the
dispatcher on `ready`. Repoint the reader at channels.store and delete the
dead roles.store (its setRoles/getRoleIdByName coverage already lives in
channels.store.test.ts). Adds a regression test pinning that the member UI
resolves role ids from the store the dispatcher writes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Fixes from an adversarial review of the previous commit:
- MainPage banner: sync the banner with the current store status at mount.
The selector subscription baselines on the current value and only fires
on change, so a MainPage mounted mid-outage (status already
"reconnecting") would never show the banner — the whole retry cycle maps
to the same 3-state value. The status→banner dispatch is extracted to
ServerBanner.applyConnectionStatus and unit-tested.
- History-fetch failure is no longer silent when the channel already has
rows (live broadcasts / optimistic sends): the inline error region only
renders in an empty channel, so loadMessages now also raises a toast in
that case.
- Composer disable reason distinguishes "Reconnecting…" from
"Not connected" per the spec §3 table (it previously showed
"Reconnecting…" while disconnected, contradicting the banner).
- The single-writer wiring is extracted to
dispatcher.wireConnectionStatus(ws) and pinned by a test (it was
previously an untestable main.ts module-scope line — deleting it would
have failed zero tests).
- Docs honesty: messaging.md's transport-drop diagram arm now shows both
codes (channel full → NETWORK, closed/not-open → OFFLINE) instead of
claiming NETWORK for both; README §3's callout now explicitly lists the
voice column ("frozen" during reconnect) as a remaining gap instead of
implying the section is fully closed; the composer table documents both
offline reasons.
- New pinning tests: SidebarArea passes ws to UserBar (the production-bug
fix was previously unasserted), ServerBanner.showDisconnected,
applyConnectionStatus mapping, ChannelController onRetryLoad /
onRetry-resend / onDeleteDraft, composer reason per status, and the
history-failure toast fallback.
Verified: tsc + full client unit suite (3234 tests) + oxlint/eslint +
prettier all green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Implements the next four gaps from the client UX spec (docs/architecture/ux).
Connection status as single source of truth (spec §3):
- main.ts registers the one writer: ws.onStateChange → toConnectionStatus
(new 5→3 state mapper exported from ws.ts) → ui.store.connectionStatus.
- Consumers now subscribe to the store instead of ad-hoc ws wirings: the
MainPage reconnect banner (which also gains a "Disconnected" state via
ServerBanner.showDisconnected instead of going stale), ChannelController
composer gating + per-click send guard, and the UserBar presence picker.
- Fixes a latent production bug: SidebarArea never passed ws to UserBar, so
the status picker was permanently disabled and its presence_update path
dead. It now gates on the store and receives the ws send path.
- The one-shot connected-overlay wiring stays on ws.onStateChange by design
(it needs the exact internal transition); LiveKit voice reconnection stays
independent ("retrying underneath").
Transport backpressure surfaced (spec §5):
- ws.ts sendRaw no longer drops local send failures silently: send() passes
the envelope id, and failures notify a new onSendFailure(id, code)
listener — channel full → NETWORK, closed/not-open → OFFLINE (deferred a
microtask on the not-open path so the optimistic row registers first).
- The dispatcher fails the matching pending row via markSendFailed, exactly
like a server error reply; id-less sends (heartbeat) and fire-and-forget
sends (typing, presence) stay silent by design. MessageList renders the
new NETWORK reason ("Connection problem — message not sent").
uploadFile honors global 401 handling (spec §5):
- api.uploadFile now calls onUnauthorized and throws ApiClientError(401)
like every other REST call; main.ts sets the "Your session expired — sign
in again." transient error so the connect page shows the reason.
History fetch loading/error states (messaging.md §1):
- messages.store gains per-channel historyLoadState (loading/error, absent
= idle) with setChannelLoading/setChannelLoadError; setMessages and
clearChannelMessages clear it.
- MessageController.loadMessages sets loading synchronously before the
fetch and marks error inline instead of a toast; MessageList renders an
in-region spinner placeholder or an inline error + Retry (onRetryLoad
re-invokes loadMessages via ChannelController).
Also fixes two pre-existing eslint errors in api.ts (redundant assertions).
Docs: the corresponding gap callouts in docs/architecture/ux are updated
(README §3/§5, messaging.md §1/§3/§6, channels-members-dms.md block-gating
note no longer claims the composer lacks a read-only mode).
Verified: tsc + full client unit suite (3225 tests) + oxlint/eslint +
prettier all green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Implements the two highest-impact gaps from the client UX spec.
Optimistic send:
- messages.store gains addOptimisticMessage / markSendFailed /
removeOptimistic, and confirmSend now stamps the real id + "sent" on
the ack. addMessage reconciles the broadcast by real id (idempotent,
replay-safe) with a defensive author match, so an echo never
duplicates. Message gains status/correlationId/errorCode.
- ChannelController.performSend renders a pending row immediately and
supports retry / delete-draft (retry preserves attachments).
- MessageList renders pending (dimmed) and failed (reason + Retry /
Delete) rows; the hover action bar is limited to confirmed rows.
- Failures are precise: the server echoes the request id on error
replies (buildErrorMsgWithID), so the dispatcher maps SLOW_MODE /
FORBIDDEN / RATE_LIMITED / BAD_REQUEST to the exact row instead of
dropping the code. An offline send is shown failed, not silently lost.
Composer permission + connection gating:
- The server computes an authoritative per-channel can_send in the ready
payload (channelCanSend mirrors MessageService.checkSendPermission:
READ|SEND, MANAGE_MESSAGES for announcement, admin bypass, channel
overrides). channels.store carries it as Channel.canSend.
- MessageInput gains a disabled-with-reason mode; ChannelController
derives the reason from can_send + channel type + connection status and
disables the composer reactively (announcement read-only, no-permission,
reconnecting) rather than accepting a click and failing. Older servers
that omit can_send default permissive.
Docs: the corresponding "Current gap" callouts in docs/architecture/ux
are updated to reflect the implementation.
Verified: full server suite + client tsc + 3204 unit tests + lint + gofmt.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UA17KPvqGBX3XbXYnMf1rA
Make 'announcement' a real channel type, resolving the contradiction where
it was documented and offered by the admin API but hard-rejected by the
migration-013 DB triggers.
Model: announcement channels are readable like text channels (same
READ_MESSAGES visibility), but posting is restricted to users with
MANAGE_MESSAGES — no new permission bit, migration, or client permission
plumbing needed.
Server:
- migrations/016: recreate the channel-type triggers to allow
text/voice/announcement/dm.
- service/message.go: checkSendPermission now takes the channel type and
rejects posts to announcement channels from users lacking MANAGE_MESSAGES
(SendMessage + CanPost paths). Added a service test.
- Unread counts: ready-payload builder (ws/serve.go) and
GetChannelUnreadCounts (db) now include announcement channels alongside
text, so they track unread/last-message like text channels.
Client:
- ChannelSidebar renders announcement channels with a megaphone icon
(added to the icon set) instead of the '#' text prefix; they otherwise
behave like text channels (already typed in ChannelType).
Specs + trackers (api.md, protocol.md, schema.md incl. migration 016,
architecture/data-model.md, audit A-2026-07-01, decisions D1) updated.
Verified: go build ./...; go test ./service ./db ./ws ./api ./admin;
sqlc-verify; client tsc + oxlint + prettier clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UA17KPvqGBX3XbXYnMf1rA
The REST path previously used tauri-plugin-http with
danger.acceptInvalidCerts, so it accepted ANY certificate while the WS
and LiveKit paths were TOFU-pinned in Rust — and the bearer token rides
every REST request. This routes REST through a new Rust loopback
TCP->TLS proxy that pins the server certificate to the same
trust-on-first-use fingerprint as the WS proxy.
Rust (src-tauri):
- New http_proxy.rs: per-host loopback tunnels (HttpProxyState map);
per-connection TOFU via CaptureVerifier + tofu_check, sharing
ws_proxy's cert store (cert_store_key) and emitting the same
cert-tofu events (first-use banner / mismatch modal). First request's
Host is rewritten and Connection: close injected so one request rides
each connection. Mismatch returns a clean 502 to the loopback fetch.
- Register HttpProxyState + start_http_proxy/stop_http_proxy in lib.rs.
- Drop the dangerous-settings feature from tauri-plugin-http.
TypeScript (src):
- New lib/httpProxy.ts: ensureHttpProxy(host) (per-host cache +
concurrent-start dedup) / stopHttpProxy(host).
- api.ts, profiles.ts (health), attachments.ts (image + download) resolve
server URLs to http://127.0.0.1:{port}; remove the allowSelfSigned
config field and every acceptInvalidCerts block. External hosts (CDNs,
OG previews, YouTube) keep normal TLS validation.
- main.ts constructs the API client without allowSelfSigned.
- capabilities/default.json: allow http://127.0.0.1:* fetch scope.
Tests:
- New tests/unit/http-proxy.test.ts (cache, dedup, stop/restart).
- api.test.ts and attachments-render.test.ts: mock httpProxy, replace the
acceptInvalidCerts assertions with proxy-origin assertions.
Verified: tsc --noEmit clean; new + affected vitest suites green
(176 tests); the http_proxy pure logic (host validation, header rewrite)
passes as standalone Rust unit tests; oxlint/eslint counts unchanged
from HEAD; prettier clean. The full Tauri build (cargo) requires GUI
system libs not present in this environment and runs on CI/real runners.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UA17KPvqGBX3XbXYnMf1rA
The Solid.js migration was abandoned (per CHANGELOG); the 154-LOC
beachhead and its scaffolding remained in-tree, leaving two UI paradigms
for contributors. Removed:
- src/components/solid/ (Badge, ChannelListItem, PluginContainer — none
imported by production code)
- src/lib/solidMount.ts and src/lib/solidAdapter.ts
- tests/setup-solid.ts and tests/setup-solid.test.tsx
- vite-plugin-solid from vite.config.ts and vitest.config.ts (and the
now-unneeded tsx test include + setupFiles)
- jsx/jsxImportSource from tsconfig.json
- solid-js, @solidjs/testing-library, vite-plugin-solid from package.json
docs/client-architecture.md (which described the SolidJS design) is
retired to a pointer at docs/architecture/client.md; README links
updated. Audit A-2026-07-12 and decision D6 marked closed.
Verified: tsc --noEmit clean (previous 3 test-file errors were caused by
the Solid jsx config and are gone); oxlint/eslint error counts identical
to HEAD (pre-existing); vitest runner healthy on a sample suite.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UA17KPvqGBX3XbXYnMf1rA
Protocol codegen (decision D4, audit A-2026-07-08):
- Add docs/protocol-schema.json as the real single source of truth for
WS message-type constants, making the long-standing 'generated from'
comment in both constant files true.
- Add Server/scripts/genprotocol, a generator emitting both
Server/ws/message_types.go and Client .../lib/protocolTypes.ts
(constants byte-for-byte value-identical to before; only headers,
ordering alignment, and provenance comments changed).
- Add make protocol-generate / protocol-verify and wire protocol-verify
into CI next to sqlc-verify.
Quick wins (decision D8):
- admin: log LogAudit write failures in the backup handlers instead of
discarding them (prior audit #10).
- api: fix self-contradictory upload Cache-Control to 'private,
no-cache' per remediation plan W3-4; drop the now-unused
fileCacheMaxAgeSeconds constant; update test.
- ws: route the hub settings cache through db.GetSetting instead of
inline SQL.
- ws: fix a latent data race — main.go wires SetEventPersister and
SetEventStore after NewRouter has already started the hub Run loop,
which reads those fields on the broadcast/replay paths. They (and
pluginSink, which one test sets post-Run) are now atomic pointers;
the remaining pre-Run-only setters reject late calls with an error
log instead of racing silently.
Update the audit closure table and decisions doc statuses accordingly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UA17KPvqGBX3XbXYnMf1rA
createLocalScreenTracks injects a default 1080p30 resolution when none is
set and mutates the passed options object, so (a) a 'source' share was
captured at 30 fps regardless of the FPS setting, with only a best-effort
applyConstraints afterwards, and (b) the shared 'source' preset object was
permanently mutated after the first share. Capture options are now always
copies; 'source' with an explicit 60/120 override passes a zero-size
resolution sentinel (uncapped in livekit's constraint translation) with the
frame rate in the raw video constraints, so the fps applies at
getDisplayMedia time.
Follow-up to #115.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwtnpHAoSFr1ZibQgQkNQK
A minimized window reports placeholder coordinates (-32000 on Windows); the
move event fired by minimize was persisting them, so quitting while
minimized silently discarded the remembered position (the new off-screen
validation then falls back to centered). Skip the save while minimized so
the last real geometry survives.
Follow-up to #124.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwtnpHAoSFr1ZibQgQkNQK
The read side of channel visibility was already complete — channel_overrides
rows deny ReadMessages and every list/focus/send/voice path enforces them —
but nothing could write those rows. Add the missing write path and UI:
- db: UpsertChannelOverride / DeleteChannelOverride / ListChannelRoleOverrides
(roles LEFT JOIN overrides so the UI gets everything in one call)
- admin API: GET/PUT/DELETE /admin/api/channels/{id}/permissions[/{roleId}]
with unknown permission bits masked via the new permissions.AllPerms,
audit logging, and immediate permission-cache invalidation
- ws: Hub.RefreshChannelVisibility sends targeted channel_create /
channel_delete to connected clients after an override change, unsubscribes
hidden clients from the channel topic, and clears their focus. Sent outside
the sequenced replay path on purpose: a replayed channel_delete would be
filtered by the post-change allowed-channel set, inverting its audience.
- admin panel: per-channel Access modal (lock icon) with per-role
"Can access" checkboxes; unchecking writes deny = ReadMessages|ConnectVoice
Known limits (follow-ups): users offline during a revoke keep a stale
sidebar entry until their next fresh connect (server still denies access),
and users already in a voice channel are not kicked when it goes private.
Closes#93
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwtnpHAoSFr1ZibQgQkNQK
Screen share frame rate was hardcoded per quality (5/15/30). Add a
"Screen Share FPS" setting (30 default / 60 / 120) next to Stream Quality:
- 30 keeps the existing per-quality caps unchanged
- 60/120 override the capture constraints and publish maxFramerate for all
qualities, with bitrate scaled 1.5x/2x to keep the image sharp
- "source" quality (no fixed resolution) applies the fps to the live
capture track via applyConstraints, best-effort
Actual delivered fps still depends on what the capture source and display
can sustain.
Closes#115
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwtnpHAoSFr1ZibQgQkNQK
Three defects made the screenshare tile's volume slider ineffective:
- The 0-200 slider mapped to element volume /200 clamped to [0,1], while
the element attached at 1.0 — dragging the upper half did nothing. The
screenshare slider is now 0-100 with 100 = 1.0 (HTMLAudioElement.volume
cannot exceed 1.0; mic tiles keep the 0-200 boost range via LiveKit's
GainNode-backed setVolume).
- Setting a volume before the screenshare audio track attached was silently
dropped. The per-user volume now persists independently of the element
map and is applied on attach.
- Changing the master output volume overwrote per-user screenshare volumes
with just the master multiplier; they now scale together.
The slider and mute button also initialize from persisted state when a tile
is rebuilt, and unmuting via the button re-applies the restored volume.
Fixes#121
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwtnpHAoSFr1ZibQgQkNQK
WebView2/Edge renders its own password-reveal eye inside password inputs,
stacking with the app's custom toggle on the login form. Hide the native
::-ms-reveal / ::-ms-clear controls globally.
Fixes#123
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwtnpHAoSFr1ZibQgQkNQK
On Wayland sessions (notably GNOME + NVIDIA), WebKitGTK's DMABUF renderer
can crash or render a blank window, so the client failed to start. Set
WEBKIT_DISABLE_DMABUF_RENDERER=1 on Wayland unless the user has already set
it themselves.
device_query's global key state needs an X11/XWayland display and panicked
per poll on pure-Wayland setups. Use DeviceState::checked_new() so push-to-
talk degrades to inactive with a single warning instead.
Fixes#96
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwtnpHAoSFr1ZibQgQkNQK
Restoring a stale window position (e.g. from a disconnected monitor) placed
the window off-screen with no way to see it. Before applying the saved
position, check that the rect is reachable on some monitor reported by
availableMonitors(): at least 100px of horizontal overlap and a grabbable
title bar row. If not, keep the default centered placement. Also reject
non-finite or non-positive saved dimensions. If monitors cannot be queried,
restore proceeds unchanged.
Fixes#124
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LwtnpHAoSFr1ZibQgQkNQK
Forward-only versioning for the alpha reset: 1.1.0-alpha.N ascends
past the superseded v1.0.0 for every installed client, and the alpha
series stays below 1.1.0-beta.N and the final 1.1.0.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
'Network' is not a tauri-bundler AppCategory, so every bundling run
failed with 'invalid category' after compilation succeeded.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Bump crossbeam-epoch 0.9.20, quinn-proto 0.11.16, rustls-webpki
0.103.13 in Cargo.lock (semver-compatible; RUSTSEC-2026-0204, -0185,
-0098, -0099, -0104 and the second quick-xml instance resolved).
quick-xml 0.37 remains pinned by tauri-winrt-notification 0.7 (via
tauri-plugin-notification) with no compatible route to the fixed 0.41;
it only parses toast XML the library itself builds, never
attacker-controlled input, so RUSTSEC-2026-0194/-0195 are ignored in
.cargo/audit.toml with removal criteria documented inline.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- cfg-gate open_devtools entirely behind the devtools feature (its
registration in lib.rs already was), removing the dead-code warning
in non-devtools builds
- drop let-bindings of unit-returning store.set in the three cert
rollback paths (let_unit_value)
- remove a needless borrow on the startup-error dialog description
(only compiled on non-Linux, hence Windows-only finding)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Mechanical prettier --write; 297 files had drifted while the CI
format gate was dead. No functional changes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Remove the unused 'type Event' named import from the committed
generated events.ts and teach the CI patch step to strip it on future
regenerations — the previous line-anchored patch deliberately skipped
imports, so ESLint failed on every run.
- Split vitest into its own client-tests job so the known-red suite
(P2 triage pending) is exactly one visible failing check instead of
masking the audit/lint/typecheck/prettier gates, which are now green.
- Drop the three stale roadmap files (PHASE_BC_LOCAL_TODO.md,
phase-b-acceleration.md, phase-c-differentiation.md) — referenced
nowhere since the CHANGELOG cleanup; already deleted on the
security-hardening branch.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Server: golang.org/x/net 0.52.0->0.55.0 (GO-2026-5026, reachable via
autocert.HostWhitelist) and go-jose/v3 3.0.4->3.0.5 (GO-2026-4945,
reachable via the LiveKit SDK). govulncheck now passes clean; full
test suite and the otel/wazero build-tag matrix verified locally.
Client: npm audit fix (semver-compatible only, 44 packages) — npm audit
--audit-level=high now exits clean. vitest moved 3.2.4->3.2.7.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
TypeScript reports TS5101 for `baseUrl`, which is deprecated and will
stop functioning in TS 7.0. The `paths` entries already use relative
`./src/*` patterns, so `baseUrl` is unnecessary and can be dropped
without changing module resolution.
https://claude.ai/code/session_01RrgSn7AUsGYVPRthnudVMr
The Client Typecheck & Test CI job was failing on the prettier format
check. Two real root causes, fixed properly:
1. prettier endOfLine was set to 'crlf' but the repo stores files with
LF (no .gitattributes forcing eol), so 'prettier --check' failed on
292 files on the Linux CI runner. Set endOfLine to 'lf' to match the
on-disk reality. Also reformat the 2 files (pluginBridge.ts,
solidAdapter.ts) that had genuine style issues.
2. 15 'eslint-disable-next-line' comments targeted oxlint-only rules
(no-await-in-loop, no-unassigned-vars) that ESLint does not enable,
so ESLint reported them as 'Unused eslint-disable directive'
warnings. Switched the directive prefix to 'oxlint-disable-next-line'
— oxlint still honors them (its native syntax), and ESLint no longer
parses them as eslint directives, so the warnings are gone without
suppressing the safety check or removing the directives that oxlint
actually relies on.
Verified locally: oxlint, tsc --noEmit, eslint, prettier --check, and
npm audit --audit-level=high all exit 0.
Resolves the parallel Phase B/C work that landed on the sister branch
while this branch was in review. Both branches independently implemented
real OTel + Wazero runtimes; this merge keeps the best of each.
Conflict resolution
- Server/plugin/sandbox_wazero.go: rewritten as a hybrid. Keeps the
HEAD lifecycle (eager `platformInit` with WASI preview-1, explicit
`platformDeactivate` per-instance, runtime closed via Registry.Close)
AND adopts the sister branch's richer artefacts:
* `WithMemoryLimitPages` actually enforces `cfg.MaxMemoryMB`,
* the JSON-over-linear-memory ABI
(`allocate` / `command_dispatch(ptr,len) → (ptr,len)` /
`deallocate`),
* `listExportedCommands` auto-binds commands the plugin exports
via `list_commands` at activation time (capability-gated).
- Server/plugin/registry.go: kept the HEAD `activate()` snapshot
pattern (read `runtimePlatform` under RLock, pass into
`activateWithRuntime` as a parameter) so a concurrent Close can't
race the wazero call. Sister branch's LoadAll stale-staging cleanup
and UninstallPlugin on-disk dir removal came in via auto-merge.
- Server/telemetry/telemetry_otel.go: kept the HEAD implementation
(race-fixed AppMetrics rebind, uint64 overflow guard, idempotent
shutdown, trace-provider cleanup on prom failure) and wired in the
sister branch's `OTLPInsecure` config field for plaintext gRPC opt-in.
- Server/go.mod: accepted sister branch's `BurntSushi/toml v1.6.0`
for the new TOML manifest support.
- Client/tauri-client/vitest.config.ts: union of both globs
(`tests/**/*.test.ts`, `src/**/*.test.ts`, `src/**/*.test.tsx`).
- PHASE_BC_LOCAL_TODO.md: combined the two checkbox histories;
TOML manifest, hello.wasm fixture, and OTLPInsecure are all marked
done now.
Sister branch additions accepted via auto-merge
- Server/plugin/examples/hello/{hello.wasm,main.go}: precompiled 925
KiB TinyGo plugin with the full ABI (allocate, deallocate,
list_commands, command_dispatch, on_event).
- Server/plugin/manifest_{toml,nottoml}.go: TOML manifest parser
behind the wazero build tag, JSON fallback elsewhere.
- Server/plugin/loader.go: prefers `plugin.toml`, falls back to
`plugin.json`.
- Server/api/plugins_handler.go: structured error responses + slog.
- Server/main.go, Server/config/config.go: OTLPInsecure plumbing,
defaults polish.
- docs/{contributing.md,server-configuration.md}: documentation
updates.
Test status
- `go build` passes on default, -tags otel, -tags wazero, and
-tags otel,wazero.
- `go vet` passes on every tag combination.
- `go test ./...` passes on default and on -tags otel,wazero.
- Client: `npx tsc --noEmit` clean; vitest 3188/3188 across 112 files.
https://claude.ai/code/session_01AZni6CDSQeu67WSWY1YCDX
Phase B Step 8 (OpenTelemetry) and Phase C Step 9 (Wazero plugin runtime)
were structurally scaffolded but the tagged builds were placeholders that
errored at runtime. This commit lands the real implementations behind the
existing build tags, plus three review passes worth of fixes across the
plugin admin handler, plugin registry, telemetry adapter, and Solid client.
Telemetry (Phase B Step 8)
- Add real go.opentelemetry.io/otel{,/sdk,/exporters/{prometheus,otlp...}}
modules to go.mod plus contrib/instrumentation/net/http/otelhttp.
- Replace the telemetry_otel.go skeleton with a working Provider that
wires Prometheus + OTLP/gRPC exporters, otelhttp middleware, span and
meter adapters, and an idempotent Shutdown.
- AppMetrics cache is now reset *before* SetGlobal to close a race where
a concurrent NewAppMetrics() could observe a swapped provider but read
stale no-op instruments.
- Init releases the trace provider on a later prometheus exporter
failure so Init never leaks gRPC connections.
- convertAttrs handles int32/uint/uint32/uint64/float32 explicitly;
uint64 values that exceed math.MaxInt64 fall back to a STRING attr
rather than wrapping into a negative int64 and corrupting metrics.
- Tests under -tags otel cover the prometheus scrape, span lifecycle,
histogram recording, shutdown idempotency, AppMetrics rebind, and
the uint64 overflow fallback.
Plugin runtime (Phase C Step 9)
- Add github.com/tetratelabs/wazero v1.11.0 to go.mod.
- platformInit creates a shared wazero.Runtime with WASI preview1
pre-instantiated; activateWithRuntime compiles + instantiates each
plugin module under that runtime; platformDeactivate closes per-
plugin modules without tearing down the runtime.
- DisablePlugin now calls platformDeactivate so the wazero module is
freed immediately instead of leaking until registry Close.
- activate() captures runtimePlatform under r.mu.RLock and passes it as
a parameter to activateWithRuntime; the call no longer re-reads the
field, closing a race with concurrent Close.
- invokeCommand calls the plugin's command_dispatch export when
present; missing/broken exports return a user-facing diagnostic
instead of crashing the dispatcher.
- Tests under -tags wazero cover registry creation, module compilation,
re-enable after disable (verifies the leak fix), close-twice safety,
invalid wasm rejection, and DispatchCommand with a missing export.
Fixture is a 41-byte embedded add.wasm; no external asset required.
Plugin admin handler hardening
- /api/v1/admin/plugins/install now rejects uploads whose multipart
Content-Type is not application/zip|x-zip-compressed|octet-stream
(415) and uploads whose body lacks the PK\\x03\\x04 / PK\\x05\\x06
zip magic (400). The 16 MiB cap and registry-side zip-slip / symlink
/ size-bomb defences are still applied as before.
- New plugins_handler_test.go covers list-empty, install-503-when-nil,
content-type rejection, magic rejection, happy path, lifecycle 503,
invalid id, and isZipContentType / hasZipMagic helpers.
Solid client (Phase B Step 6) cleanup
- vitest.config.ts now wires vite-plugin-solid and broadens the test
glob to include src/**/*.test.tsx so Badge.test.tsx is actually
discovered (it was silently skipped).
- pluginBridge.ts targets postMessage at window.location.origin
instead of "*", and exposes a destroy() that detaches the message
listener and clears mounted frames.
- solidMount.ts imports the JSX type from "solid-js" instead of
"solid-js/web" (the latter does not re-export it), unblocking
npx tsc --noEmit.
Build/test status
- go build succeeds on default, -tags otel, -tags wazero, and
-tags otel,wazero.
- go test passes on every tag combination across telemetry, plugin,
api, ws, service, store, and the rest of the tree.
- Client: npx tsc --noEmit clean; vitest 3188/3188 across 112 files.
PHASE_BC_LOCAL_TODO.md is updated to mark the OTel modules + real Init,
the wazero module + real platformInit, and the test coverage that
landed in this commit as completed.
https://claude.ai/code/session_01AZni6CDSQeu67WSWY1YCDX
Plugin TOML support (-tags wazero):
- manifest_toml.go: tryLoadPluginTOML using BurntSushi/toml v1.6.0
- manifest_nottoml.go: no-op stub for default build
- loader.go: prefers plugin.toml, falls back to plugin.json
Solid vitest preset:
- vitest.config.ts: add vite-plugin-solid, expand include to
src/components/solid/**/*.test.tsx — Badge.test.tsx now runs
automatically as part of npm test (112 files / 3188 tests)
Phase B + C review pass: critical security and correctness fixes.
Security
- S1: plugin admin endpoints now require admin.RequireAdminAuth in addition
to AdminIPRestrict. Previously a LAN attacker on the allowed CIDR could
list/enable/disable/uninstall plugins without a session.
- S2: rewrite plugin HTTPDo allowlist with proper net/url parsing. Empty
entries are ignored, suffix matches require a dot boundary, and a custom
Dialer rejects loopback / RFC1918 / link-local addresses to close the
DNS-rebinding TOCTOU window. Redirects re-validated.
- S3 + #9: manifest Name pinned to ^[a-z0-9][a-z0-9_-]{0,63}$, Entrypoint
and UI tab assets validated against absolute / "..", NUL byte, backslash
and non-canonical paths. Asset handler hardened with filepath.Rel check
for symlink and prefix-without-separator escapes.
- S5: pluginBridge postMessage handler ignores the pluginId in the message
body and uses an e.source -> contentWindow lookup instead, defeating
spoofed messages from same-origin scripts.
- S8: HTTPDo body capped at 5 MiB via io.LimitReader, redirects bounded
to 5 hops.
Correctness
- Critical seq alignment: PersistEvent now takes the hub-assigned seq as a
required parameter so the events table row seq always matches the wrapped
payload seq. Hub seeds its in-memory atomic counter from MAX(events.seq)
on startup. Drops in the persister queue no longer mis-align row vs
payload seq.
- #1: live plugin.Registry constructed in main.go BEFORE NewRouter and
threaded through; admin handler is no longer wired with nil.
- #3: EventPersister.Stop is now safe to call without a prior Start by
tracking a started flag — previously deadlocked waiting on done.
Wiring
- NewRouter signature gains *plugin.Registry; two test callers updated.
- admin.RequireAdminAuth exported as a thin wrapper over the existing
package-private adminAuthMiddleware.
- sqlc query templates updated for the new PersistEvent + GetMaxEventSeq
contracts (sqlite + postgres).
https://claude.ai/code/session_01UsBsQW2YiA2usk9pnJjAWk
PendingVoiceJoin was missing the isKeyHolder field, so when the drain
loop called connectAndSetup for a queued join it defaulted to false,
entering the "wait for room key from key holder" E2EE path and hanging
indefinitely. Store isKeyHolder in the pending join and forward it.
- Remove commented-out code flagged by gocritic
- Use bytes.Equal instead of string conversion comparison
- Remove unused buildRateLimitError function
- Remove unnecessary type assertions in e2eeCrypto.ts
