nhooyr.io/websocket now resolves to github.com/nhooyr/websocket-old and its
README is a one-line deprecation pointing at coder/websocket. Its last three
releases (v1.8.15-17) all shipped on 2024-08-10 as the redirect; the fork has
shipped through 2026-06-15.
The version number decreases (v1.8.17 -> v1.8.15) because both paths tagged in
the same space, but the coder release is ~2 years newer. Import path only; the
9 API symbols used are unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
GIFs are off by default and each operator supplies their own Klipy key,
but nothing user-facing said so — README and quick-start had zero mentions,
so a fresh self-hoster had no way to learn the feature exists.
Records the decision as D12 with the rejected alternatives, so the
trade-off is not silently revisited later.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The GIF key now lives in server config, so no build job needs it. Leaving
the secret wired into the build env is the exact mechanism that leaked the
original key: any future re-add of import.meta.env.VITE_KLIPY_API_KEY would
silently inline it into the bundle again with the secret already present.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Update the security doc's capability section with the deny list, the fact
that `http:allow-fetch` is the only URL-scoped HTTP identifier, and why
the https wildcard cannot be removed without moving the link-preview
fetch into Rust. Note under Known Limitations that narrowing the plugin
scope alone does not bound exfiltration while CSP `connect-src` allows
`https:` to any host. Add a capability row to the client architecture
doc and mark the design note implemented.
Add a deny list for https loopback literals (localhost, 127.0.0.1, both
with and without an explicit port) to `http:allow-fetch`. All legitimate
server traffic reaches loopback over http through the Rust TOFU proxy, so
an https loopback fetch from the renderer can only be an attempt to probe
some other local service. `deny` wins over `allow` in Tauri's scope check.
Drop the scope objects from `http:allow-fetch-send` and
`http:allow-fetch-read-body`, leaving bare identifiers. tauri-plugin-http
validates the URL exactly once, in the `fetch` command; both of these take
an already-validated ResourceId and never consult a scope, and a
permission declaring `commands.allow` contributes command scope only —
it never merges into the plugin's global scope. The blocks were inert
configuration that read like defence in depth. The capability description
now records why, so they are not re-added on reflex.
The `https://*` wildcard on `http:allow-fetch` stays: link previews fetch
arbitrary user-posted URLs by design, and Tauri scopes per command, not
per JS caller. See docs/plans/tauri-capability-narrowing.md.
Add tests/unit/capabilities-scope.test.ts as a regression guard on the
shape of the grant.
Investigates whether the https wildcard on the three http:allow-fetch*
identifiers can be enumerated now that the HTTP TOFU proxy has landed.
Two findings change the answer:
- Only http:allow-fetch is URL-scoped. tauri-plugin-http validates the URL
in the `fetch` command only; `fetch_send` and `fetch_read_body` take a
ResourceId and never consult a scope, and Tauri's ACL resolver keeps a
command-declaring permission's scope as command scope. The allow blocks
on the other two identifiers are inert.
- The host set is not enumerable: api.ts, profiles.ts and attachments.ts
are loopback-only (attachment URLs are always server-generated
/api/v1/files/<id>) and media.ts hits one fixed YouTube oEmbed URL, but
embeds.ts fetches arbitrary user-posted URLs by design.
Decision: keep the https wildcard with a loopback deny list, drop the two
inert scope blocks, and record the Rust-side link-preview command as the
follow-up that would actually make the set enumerable. Residual risk
(CSP connect-src already allows https:) stated explicitly.
The closure rationale for audit finding #4 claimed in five places that
nothing in the server calls EventSink.Dispatch. That is disprovable by
grep: ws/hub.go:1034 calls Dispatch on every broadcast message, and
api/router.go:134-139 wires h.pluginSink whenever plugins are enabled.
The call site is pre-existing on main, not introduced by this branch.
Restate the closure on the claim the evidence actually supports:
Dispatch has exactly one caller outside the plugin package's tests
(ws/hub.go, on the hub's broadcast goroutine under seqMu), but its loop
body invokes no guest code and no production code calls Subscribe, so
the subscriber set is always empty and no guest code executes on the
event path. Finding #4 stays closed; the reason changes.
Also warn on Subscribe that adding the first production caller turns
Dispatch's loop live on the hub's hot path, and note in the SECURITY
GATE that the call site already exists so wiring delivery is not a new
integration.
Corrected in: plugin/host_events.go (Dispatch + Subscribe comments),
plugin/audit_closure_test.go, docs/audit-2026-04-07.md (row 4 and the
structural-mitigation paragraph), docs/audit-2026-07-19.md §1 row,
docs/plans/audit-2026-07-19-decisions.md D11.
Comments and docs only — no behaviour change.
P3 item 4. Each of the five plugin CRITICALs in audit-2026-04-07.md was
re-verified against the current Server/plugin/ code rather than the tracker:
- #1 invokeCommand timeout — CLOSED. Per-call CPU budget (manifest →
config → 100ms floor) + WithCloseOnContextDone + lazy re-instantiation.
Landed in PR #1182 (7b178ff, b13adf2); pinned by the W1-1 test.
- #2 storage key isolation — CLOSED. The premise did not hold: the namespace
is the caller's Instance.ID and plugin_kv PRIMARY KEY (plugin_id, key).
- #3 per-command ACL — CLOSED by the manifest `commands` ACL in 3d2dd19.
- #4 event rate limit — CLOSED as not reachable: EventSink.Dispatch invokes
no guest code and has zero callers; the requirement is recorded as a
SECURITY GATE at the point delivery would be wired.
- #5 HTTP exfiltration — OPEN, accepted residual risk. An allowlisted host is
by definition a permitted destination; closing it needs egress content
policy and per-plugin allowlists, i.e. a runtime redesign, out of scope
for P3.
Because #5 stays open the standing rule fires as written: plugins ship
default-disabled at the beta gate. Re-verified in config.DefaultConfig() —
Plugins.Enabled false, HTTPAllowlist empty. Also records the structural
mitigation covering #2/#4/#5: no host imports are wired into the wazero
runtime, so command_dispatch and list_commands are the only guest-reachable
entry points today.
Mirrors the outcome in the §1 carried-over row of audit-2026-07-19.md,
records decision D11 in plans/audit-2026-07-19-decisions.md, and notes in
plans/slash-commands.md which slice of its manifest design already landed.
Closes audit-2026-04-07 CRITICAL #3. Holding the `commands` capability used
to bind whatever names the guest module returned from `list_commands`, so an
admin enabling a plugin could not know which commands it would claim and a
plugin could widen its own command surface after review.
The manifest is now the authority. `plugin.json` gains a `commands` block
(`[{"name": "hello"}]`) and `RegisterCommand` refuses any undeclared name —
the single choke point both auto-registration and direct registration route
through, so no caller can bypass it. Declared names are validated to the
dispatcher's canonical lowercase form, deduplicated, and capped at 64.
The object shape matches docs/plans/slash-commands.md so the richer
per-command schema can land later without a manifest migration.
Also pins the two neighbouring CRITICALs that verification found already
closed, and adds the storage key cap host_storage.go's doc comment already
promised:
- #2 (storage key isolation): TestStorageKeysIsolatedPerPlugin — the KV
namespace is the caller's Instance.ID with no parameter to override it,
and plugin_kv PRIMARY KEY (plugin_id, key) makes the split structural.
- #4 (event rate limit): TestEventDeliveryHasNoGuestPath — EventSink.Dispatch
invokes no guest code and has no callers, so there is nothing to limit yet;
a SECURITY GATE comment requires the limiter in whatever change wires
delivery.
- #5 mitigation: TestEmptyAllowlistDeniesEveryHost — the shipped empty
http_allowlist must fail closed.
BREAKING CHANGE: a plugin declaring the `commands` capability must now list
its commands in the manifest's `commands` block; undeclared names no longer
bind. Only the in-repo `hello` example is affected and is updated here.
gifProvider.ts now goes through api.ts (TOFU-pinned via the Rust http proxy)
instead of api.klipy.com, and the VITE_KLIPY_API_KEY path is deleted outright.
The built bundle greps clean of the key name and of api.klipy.com.
The klipy.com CDN allowlist stays: media URLs still load from Klipy's CDN, and
the server is trusted to hold the key but not to dictate what the client
renders.
Degradation: on 503 GIF_DISABLED the picker shows "GIFs are not enabled on
this server" and calls onUnavailable, which disables the composer's GIF button
with a title/aria-label reason — mirroring the existing attach-button rule so
re-enabling the composer does not resurrect it. A MessageInput with no gifApi
wired renders the button disabled from the start.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The client held the Klipy key in VITE_KLIPY_API_KEY, which Vite inlines into
the shipped bundle by design — a build variable can never hold a secret. Move
the integration behind the server:
- New authenticated GET /api/v1/gif/search and /api/v1/gif/trending. The key
comes from the new `gif.api_key` config section (koanf,
OWNCORD_GIF_API_KEY) and never leaves the server.
- Default-off: with no key, both endpoints return 503 GIF_DISABLED so clients
can hide the picker instead of showing a broken one. Auth is checked first,
so anonymous callers cannot probe whether a key is configured.
- Outbound call reuses the existing SSRF-guarded dialer (exported as
plugin.GuardedDialContext) rather than a bare http.Get: resolve once,
reject private/loopback/link-local/CGN, dial only vetted IPs. Redirects are
not followed and the response body is size-capped.
- Only id/title/media_formats.{tinygif,gif}.url are forwarded — decoding into
the narrow struct is the allowlist, so an upstream that echoed the key
could not leak it. Upstream errors become a generic 502 and the key is
redacted from anything that reaches the logs.
- Dedicated `gif:` rate-limit bucket (30/min per IP) so debounced search
traffic cannot exhaust the shared bucket used by password/TOTP endpoints.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Rows 1, 2, 4, 6, 7, 8, 9 were all closed in the closure table but never
struck in the section 6 backlog, making the remaining work look ~4x larger
than it is. Only rows 10 (partial) and 12 are still open.
Also drops the stale "V1/V2 dispatch" blurb from the architecture index,
which contradicted websocket.md after the V1 registry was deleted in #1196.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The suite was never red: on Node 22+ native Web Storage shadows jsdom's
localStorage, failing ~478 unrelated tests locally. Documents the workaround
where a future session will hit it, and corrects the stale KNOWN RED
assertions in docs/architecture/client.md and the ci-check skill that
contradicted the new green-and-must-stay-green rule.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- audit-2026-07-19.md: A-2026-07-07 and A-2026-07-09 → RESOLVED
2026-07-20 in the findings tables; §6 backlog rows 3 and 11 struck
through as DONE (D9/D10)
- plans/audit-2026-07-19-decisions.md: D9/D10 status → Implemented
- plans/channel-visibility-unification.md, v2-dispatch-migration.md:
status → implemented; v2 note records the applier-trigger shape the
voice handlers actually landed with
- architecture/server.md: WS box "V1+V2 dispatch" → "typed command
dispatch"
- architecture/websocket.md: intro + §D4c redrawn as the single typed
path (no V1 fallback)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Port the last three V1 message types to typed V2 handlers, then remove
the V1 registry and fallback path so handleMessage has a single dispatch
generation (audit A-2026-07-09 / backlog item 11). Server-internal only —
the envelope wire format is unchanged, no client/protocol edits.
- chat_command: ChatCommandCmd + constructor (empty/args guards) and a
V2 handler returning an ephemeral Reply plus a channel-routed
PluginBroadcastEvent gated by MessageService.CanPost; PluginDeps reads
the registry live (wired post-construction)
- voice_join/voice_leave: V2 handlers gate parse/rate-limit and hand off
to the still-hub-internal handleVoiceJoin/handleVoiceLeave routines via
new Result.JoinVoice / Result.LeaveVoice appliers (those routines are
also called un-throttled on disconnect and channel switch)
- delete HandlerRegistry.handlers/Register/Dispatch/RegisteredTypes/
IsRegisteredV1/hasV2, the MessageHandler type, and the V1-shadowing
guard; NewHub registers only V2
- tests: per-handler V2 tests + a parity guard asserting every command
constructor has a V2 handler and vice versa (locks the migration shut)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Route the four "must mirror" READ_MESSAGES filters — REST
ListVisibleChannels, ws buildReady, reconnect replay
computeAllowedChannels, and hub RefreshChannelVisibility — through a
single permissions.Checker predicate so a drift can never leak a
private channel (audit A-2026-07-07 / backlog item 3).
- add permissions.Checker.VisibleChannelIDs + ChannelRef (skips dm,
fails closed, admin bypass via HasChannelPermBatch)
- delegate the three batch sites; RefreshChannelVisibility uses
HasChannelPerm instead of its inline EffectivePerms copy
- REST/WS agreement test asserting all three sites yield the identical
non-DM set across admin / member-with-deny / denied-everywhere
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Greenlight backlog items 3 (A-2026-07-07) and 11 (A-2026-07-09) for
implementation. One design note each in docs/plans/ matching the existing
per-decision format (problem, approach, files touched, test plan, non-goals),
plus D9/D10 rows in the maintainer decisions doc dated 2026-07-20.
Design-only step of the audit-backlog PR; no code changes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add decision D9 (dated 2026-07-20) to the audit decisions doc capturing the
maintainer-approved policy: best-effort audit writes, never silently
discarded, routed through db.WriteAudit. Mark carried-over finding #10 in
docs/audit-2026-07-19.md as RESOLVED with the helper adoption.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Audit writes stay best-effort — a LogAudit failure must never fail or abort
the request — but a failed write must no longer be silently discarded. Add
db.WriteAudit(auditor, actor, action, targetType, targetID, detail), which
logs a failed write with actor/action/target context (never the detail
string, which may be sensitive) and never propagates the error.
The Auditor interface is satisfied structurally by both *db.DB and the
service-layer Store, so api/admin/ws/service all reach the helper without an
import cycle. Converts all ~26 call sites from `_ = LogAudit(...)` (and the
two backup handlers' inline `if err` blocks) to db.WriteAudit. Pinned by
db/audit_test.go: failure logged and not propagated, success logs nothing,
detail never leaks.
Resolves the repo-wide LogAudit policy question flagged by the D8 note.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Rust download callback was a no-op, so "Downloading update…" looked hung
for large binaries (settings-and-admin.md §5). download_and_install_update now
accumulates received bytes and emits an `update-progress` event
({ received, total }) to the webview. downloadAndInstallUpdate(serverUrl,
onProgress) listens for it and UpdateNotifier renders a percentage when the
total is known, falling back to bytes (MB) until Content-Length arrives.
Rust change is minimal and CI-gated only (not built locally per policy). Adds
TS tests for the formatter and the banner wiring.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Wire DM block state into the existing disabled-with-reason composer mode
(channels-members-dms.md §3.2). A new blocks.store holds two directions:
- blockedByMe (from GET /blocks on every ready) -> "You've blocked this
user. Unblock to send messages."
- blockedByThem (inferred from a refused DM send: ErrBlocked -> FORBIDDEN,
cleared on the next ready) -> neutral "You can't message this user right
now.", never revealing the block explicitly.
ChannelController reads dmComposerBlockReason(recipientId) and subscribes to
blocks.store so an unblock (shrunken GET /blocks) re-enables the composer
live; blockedByMe takes precedence when both apply. Adds api.listBlocks(),
threads an optional api into wireDispatcher, and covers both directions plus
un-gating in blocks-store / channel-controller / dispatcher tests.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
setVoiceStatus("reconnecting") is written from the setReconnectAc callback fired
via roomEventHandlers.handleDisconnected on an unexpected room drop — the primary
reconnecting write, previously untested (the reconnect suite only asserted the
subsequent "connected"). Add a test that connects, captures the Disconnected
handler, fires it with a non-CLIENT_INITIATED reason, and asserts both the
"reconnecting" session state and the setVoiceStatus("reconnecting") write.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The WS-reconnect control freeze (spec item 6) only reached the VoiceWidget's
in-call controls. The actual join affordance — clicking a voice-channel row in
ChannelSidebar — stayed a plain clickable div with no disabled state, so a click
while the socket was reconnecting/disconnected was a silent no-op (only the
VoiceCallbacks socketLive() backstop stopped the send).
Gate renderVoiceChannelItem on ui.store.connectionStatus using the same
disabled-with-reason pattern as VoiceWidget: apply a .disabled class,
aria-disabled, and a "Reconnecting…" / "Not connected" title while not connected,
and make the click a no-op. Subscribe the sidebar to connectionStatus so the row
freezes/unfreezes reactively (mirrors the existing collapsedCategories selector).
Docs: README.md §3 callout now notes the sidebar join affordance takes the
disabled-with-reason state too; voice-and-e2ee.md lists ChannelSidebar.ts as a
source of truth for the freeze.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Mark the voice-and-e2ee.md §1 (store-backed voiceStatus) and §2 (visible E2EE
securing/secured indicator) gaps as implemented, noting the client runs the ECDH
key exchange before the media connect. Close the remaining voice column of the
README.md §3 connection-status table: voice controls now freeze on WS reconnect.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- livekit-session: assert joining→securing→connected on join, idle on leave,
connected after auto-reconnect
- voice-widget: assert each status label + secured badge visibility, and controls
disabled with reason while the socket is down, re-enabled on reconnect
- voice-callbacks: assert join/leave/disconnect do not send over a down socket
- voice.store: assert join seeds joining, leave resets idle, setter writes status
- thread voiceStatus through existing full-state fixtures; keep an active-call
socket live in widget fixtures so control-click tests still operate enabled
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add a store-backed voice.store.voiceStatus (idle | joining | securing |
connected | reconnecting), written as the single source of truth from
livekitSession at each lifecycle transition: joining at connectAndSetup start,
securing when ECDH key exchange begins, connected on the connected transition
(initial join and auto-reconnect), reconnecting when the room drops, idle on
leaveVoice. joinVoiceChannel seeds joining optimistically on click.
VoiceWidget renders the phase in its header: 'Connecting…' / 'Securing…' (amber)
and a persistent '🔒 Secured' badge once the room key is ready, replacing the
log-line-only E2EE feedback. While ui.store.connectionStatus is not 'connected',
the widget disables its controls with a 'Reconnecting…' / 'Not connected' reason,
and the VoiceCallbacks join/leave paths refuse to send over a down socket.
LiveKit's own reconnection machinery is untouched.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The full vitest suite passes (verified locally, 3252/3252), but both CLAUDE.md
files, ci.yml's client-tests comment, and audit item A-2026-07-04 still called
it "KNOWN RED" pending a P2 triage. Update all four to say the suite is green
and must stay green, and close A-2026-07-04 (2026-07-20). Flipping client-tests
to blocking + the nightly Playwright gate remain tracked as backlog #10.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
api.logout() (POST /auth/logout) existed but was never called, leaving the
bearer token valid server-side after a client-local logout. Add a small
logout() helper that fires the revocation best-effort — fire-and-forget with
its rejection swallowed — then runs clearAuth() synchronously, so a slow,
offline, or rejecting server can never block or delay the local logout. Wire
it into the settings Log Out button. Tests pin both paths: logout is called,
and local logout still completes when the request rejects or never settles.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SidebarMemberSection read role name->id from a parallel roles.store that
nothing ever wrote to — only channels.store.setRoles is updated by the
dispatcher on `ready`. Repoint the reader at channels.store and delete the
dead roles.store (its setRoles/getRoleIdByName coverage already lives in
channels.store.test.ts). Adds a regression test pinning that the member UI
resolves role ids from the store the dispatcher writes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Fixes from an adversarial review of the previous commit:
- MainPage banner: sync the banner with the current store status at mount.
The selector subscription baselines on the current value and only fires
on change, so a MainPage mounted mid-outage (status already
"reconnecting") would never show the banner — the whole retry cycle maps
to the same 3-state value. The status→banner dispatch is extracted to
ServerBanner.applyConnectionStatus and unit-tested.
- History-fetch failure is no longer silent when the channel already has
rows (live broadcasts / optimistic sends): the inline error region only
renders in an empty channel, so loadMessages now also raises a toast in
that case.
- Composer disable reason distinguishes "Reconnecting…" from
"Not connected" per the spec §3 table (it previously showed
"Reconnecting…" while disconnected, contradicting the banner).
- The single-writer wiring is extracted to
dispatcher.wireConnectionStatus(ws) and pinned by a test (it was
previously an untestable main.ts module-scope line — deleting it would
have failed zero tests).
- Docs honesty: messaging.md's transport-drop diagram arm now shows both
codes (channel full → NETWORK, closed/not-open → OFFLINE) instead of
claiming NETWORK for both; README §3's callout now explicitly lists the
voice column ("frozen" during reconnect) as a remaining gap instead of
implying the section is fully closed; the composer table documents both
offline reasons.
- New pinning tests: SidebarArea passes ws to UserBar (the production-bug
fix was previously unasserted), ServerBanner.showDisconnected,
applyConnectionStatus mapping, ChannelController onRetryLoad /
onRetry-resend / onDeleteDraft, composer reason per status, and the
history-failure toast fallback.
Verified: tsc + full client unit suite (3234 tests) + oxlint/eslint +
prettier all green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Implements the next four gaps from the client UX spec (docs/architecture/ux).
Connection status as single source of truth (spec §3):
- main.ts registers the one writer: ws.onStateChange → toConnectionStatus
(new 5→3 state mapper exported from ws.ts) → ui.store.connectionStatus.
- Consumers now subscribe to the store instead of ad-hoc ws wirings: the
MainPage reconnect banner (which also gains a "Disconnected" state via
ServerBanner.showDisconnected instead of going stale), ChannelController
composer gating + per-click send guard, and the UserBar presence picker.
- Fixes a latent production bug: SidebarArea never passed ws to UserBar, so
the status picker was permanently disabled and its presence_update path
dead. It now gates on the store and receives the ws send path.
- The one-shot connected-overlay wiring stays on ws.onStateChange by design
(it needs the exact internal transition); LiveKit voice reconnection stays
independent ("retrying underneath").
Transport backpressure surfaced (spec §5):
- ws.ts sendRaw no longer drops local send failures silently: send() passes
the envelope id, and failures notify a new onSendFailure(id, code)
listener — channel full → NETWORK, closed/not-open → OFFLINE (deferred a
microtask on the not-open path so the optimistic row registers first).
- The dispatcher fails the matching pending row via markSendFailed, exactly
like a server error reply; id-less sends (heartbeat) and fire-and-forget
sends (typing, presence) stay silent by design. MessageList renders the
new NETWORK reason ("Connection problem — message not sent").
uploadFile honors global 401 handling (spec §5):
- api.uploadFile now calls onUnauthorized and throws ApiClientError(401)
like every other REST call; main.ts sets the "Your session expired — sign
in again." transient error so the connect page shows the reason.
History fetch loading/error states (messaging.md §1):
- messages.store gains per-channel historyLoadState (loading/error, absent
= idle) with setChannelLoading/setChannelLoadError; setMessages and
clearChannelMessages clear it.
- MessageController.loadMessages sets loading synchronously before the
fetch and marks error inline instead of a toast; MessageList renders an
in-region spinner placeholder or an inline error + Retry (onRetryLoad
re-invokes loadMessages via ChannelController).
Also fixes two pre-existing eslint errors in api.ts (redundant assertions).
Docs: the corresponding gap callouts in docs/architecture/ux are updated
(README §3/§5, messaging.md §1/§3/§6, channels-members-dms.md block-gating
note no longer claims the composer lacks a read-only mode).
Verified: tsc + full client unit suite (3225 tests) + oxlint/eslint +
prettier all green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Implements the two highest-impact gaps from the client UX spec.
Optimistic send:
- messages.store gains addOptimisticMessage / markSendFailed /
removeOptimistic, and confirmSend now stamps the real id + "sent" on
the ack. addMessage reconciles the broadcast by real id (idempotent,
replay-safe) with a defensive author match, so an echo never
duplicates. Message gains status/correlationId/errorCode.
- ChannelController.performSend renders a pending row immediately and
supports retry / delete-draft (retry preserves attachments).
- MessageList renders pending (dimmed) and failed (reason + Retry /
Delete) rows; the hover action bar is limited to confirmed rows.
- Failures are precise: the server echoes the request id on error
replies (buildErrorMsgWithID), so the dispatcher maps SLOW_MODE /
FORBIDDEN / RATE_LIMITED / BAD_REQUEST to the exact row instead of
dropping the code. An offline send is shown failed, not silently lost.
Composer permission + connection gating:
- The server computes an authoritative per-channel can_send in the ready
payload (channelCanSend mirrors MessageService.checkSendPermission:
READ|SEND, MANAGE_MESSAGES for announcement, admin bypass, channel
overrides). channels.store carries it as Channel.canSend.
- MessageInput gains a disabled-with-reason mode; ChannelController
derives the reason from can_send + channel type + connection status and
disables the composer reactively (announcement read-only, no-permission,
reconnecting) rather than accepting a click and failing. Older servers
that omit can_send default permissive.
Docs: the corresponding "Current gap" callouts in docs/architecture/ux
are updated to reflect the implementation.
Verified: full server suite + client tsc + 3204 unit tests + lint + gofmt.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UA17KPvqGBX3XbXYnMf1rA
Adds docs/architecture/ux/ — a prescriptive (to-be) behavior spec for the
Tauri client, complementing the as-built module map in
docs/architecture/client.md. Covers every view and how it should react to
server events, permission state, and failure:
- README.md — view-state vocabulary, feedback primitives,
connection-status contract, the global
event->reaction map, and the error/permission
reaction matrix
- connection-and-auth — boot, profiles/health, login, TOTP,
register-by-invite, connected handshake,
reconnect, cert-TOFU trust
- messaging — composer permission/connection gating, optimistic
send lifecycle, edit/delete, reactions,
attachments, pins, search, read/unread, slow-mode
- channels-members-dms — channel list/switch/categories, member list +
presence + typing, DM open/close, blocking
- voice-and-e2ee — join/leave, mute/deafen/camera/screenshare, PTT,
active-speaker, and the E2EE securing/secured
indicators
- settings-and-admin — settings tabs, profile/password/2FA/delete,
theming, inline admin (ban/kick/roles, channel
CRUD, invites), updater
Each flow carries dated "Current gap" callouts where today's code diverges
from the target (grounded in file:line references), so the set doubles as a
UX improvement backlog. Notable gaps captured: non-optimistic send with a
dead pending-send path, no composer read-only/permission gating (incl.
announcement channels), silently-dropped WS error codes, no E2EE "securing"
indicator, no updater download progress, client-local logout that never
revokes the server session, and a duplicated role store.
All 12 Mermaid diagrams validated; intra-repo links checked. Indexed from
docs/architecture/README.md and the top-level Docs Index.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UA17KPvqGBX3XbXYnMf1rA
J3vb