draft: Make Tool Steps Seperate Pages

## What & why

Production reports of policy enforcement "hanging" traced to
large/many-page documents: the watermark step's flatten-to-image
(`convertPDFToImage`) on a 500+ page PDF takes minutes, exceeding both
the client poll cap and the backend per-step timeout. This makes the
slow case graceful instead of looking broken, and makes load-shedding
non-fatal.

### Poll runs to completion (no false "hang")
The client poll loop used a flat ~150s cap that was **shorter than the
backend's 300s per-step timeout**, so it abandoned long-but-healthy runs
mid-flight. The budget is now sized to the backend's real worst case —
`stepCount × per-step timeout + grace`, learned from the first status
report — so the client always polls long enough to surface the run's
**actual** terminal state (success or the backend's real error) rather
than a misleading client-side timeout.

### Per-step progress
The activity feed now shows `Enforcing… · step n/m` (from
`currentStep`/`stepCount`), so a slow step shows movement instead of a
dead spinner.

### Soft-retry on queue rejection
Under load the shared `JobQueue` rejects runs ("queue full"), which
previously surfaced as a hard failure needing a manual Retry. The
backend now tags that rejection with a stable `POLICY_QUEUE_FULL`
errorCode; the client treats it as transient backpressure and
**auto-retries the file in place** with exponential backoff (≈4s→64s, ~2
min), shown as a soft "Busy — retrying…" row, falling back to the manual
Retry only once the retry budget is spent.

## Testing
- **Frontend unit tests** (30 pass across the policies suite), including
a new `usePolicyAutoRun.retry.test.tsx` that drives the real controller
orchestration (poll → `POLICY_QUEUE_FULL` → relabel → backoff → in-place
re-dispatch), plus poll-budget, step-progress, and activity-feed relabel
cases.
- **Backend** `PolicyEngineTest` case asserting a queue-rejected run
carries the `POLICY_QUEUE_FULL` code.
- Typecheck clean on all three flavors (proprietary/saas/core); prettier
+ spotless clean.
- Poll-budget + progress + real-error surfacing were also verified live
end-to-end against a 599-page run (survived past the old cap, showed
step progress, reported the backend's real 300s-timeout failure,
recovered after a simulated network drop).

## Not included (follow-ups)
- The underlying flatten-to-image cost itself (bounded-memory/streaming
flatten, revisiting `convertPDFToImage` default and the 300s timeout) —
the real perf fix, deliberately out of scope here.

.dockerignore

@@ -26,8 +26,9 @@ version_builds/
 node_modules/
 **/node_modules/
 frontend/node_modules/
-frontend/dist/
-frontend/playwright-report/
+frontend/editor/dist/
+frontend/dist-portal/
+frontend/editor/playwright-report/
 .npm/
 .yarn/
 

.github/actions/setup-bot/action.yml

@@ -24,7 +24,7 @@ runs:
       id: generate-token
       uses: actions/create-github-app-token@bcd2ba49218906704ab6c1aa796996da409d3eb1 # v3.2.0
       with:
-        app-id: ${{ inputs.app-id }}
+        client-id: ${{ inputs.app-id }}
         private-key: ${{ inputs.private-key }}
     - name: Configure Git
       run: |

.github/aur/stirling-pdf-desktop/PKGBUILD

@@ -1,6 +1,6 @@
 # Maintainer: Stirling PDF Inc <contact@stirlingpdf.com>
 pkgname=stirling-pdf-desktop
-pkgver=2.11.0
+pkgver=2.12.0
 pkgrel=1
 pkgdesc="Locally hosted, web-based PDF manipulation tool (Tauri desktop app, official Stirling PDF Inc build)"
 arch=('x86_64')

.github/aur/stirling-pdf-server-bin/PKGBUILD

@@ -1,6 +1,6 @@
 # Maintainer: Stirling PDF Inc <contact@stirlingpdf.com>
 pkgname=stirling-pdf-server-bin
-pkgver=2.11.0
+pkgver=2.12.0
 pkgrel=1
 pkgdesc="Locally hosted, web-based PDF manipulation tool (server JAR, prebuilt)"
 arch=('any')

.github/config/.files.yaml

@@ -1,6 +1,8 @@
 build: &build
   - build.gradle
   - app/(common|core|proprietary)/build.gradle
+  - Taskfile.yml
+  - .taskfiles/backend.yml
 
 openapi: &openapi
   - *build
@@ -38,6 +40,9 @@ project: &project
   - frontend/**
   - docker/**
   - scripts/RestartHelper.java
+  - Taskfile.yml
+  - .taskfiles/backend.yml
+  - .taskfiles/docker.yml
   - scripts/db-migration/**
   - .github/workflows/db-migration-test.yml
 
@@ -55,6 +60,9 @@ frontend: &frontend
   - scripts/summarize_type3_signatures.py
   - scripts/type3_to_cff.py
   - scripts/update_type3_library.py
+  - Taskfile.yml
+  - .taskfiles/frontend.yml
+  - .taskfiles/e2e.yml
 
 # Files that affect the Tauri desktop bundle. Gate the multi-OS Tauri build
 # job on changes to any of these.
@@ -66,6 +74,8 @@ tauri: &tauri
   - frontend/package-lock.json
   - frontend/editor/vite.config.ts
   - .github/workflows/tauri-build.yml
+  - Taskfile.yml
+  - .taskfiles/desktop.yml
 
 # Files that affect the AI engine (Python tool models, fixers, tests). Gate
 # the engine validation job on changes to engine sources or to the Java
@@ -74,6 +84,8 @@ engine: &engine
   - engine/**
   - app/(common|core|proprietary)/src/main/java/**
   - .github/workflows/ai-engine.yml
+  - Taskfile.yml
+  - .taskfiles/engine.yml
 
 licenses-frontend: &licenses-frontend
   - ".github/workflows/frontend-backend-licenses-update.yml"
@@ -102,4 +114,4 @@ proprietary: &proprietary
   - configs/settings.yml.template
   - build.gradle
   - app/proprietary/build.gradle
-  - .github/workflows/build-enterprise.yml
+  - .github/workflows/build-enterprise.yml

.github/scripts/check_language_toml.py

@@ -13,7 +13,7 @@ Usage:
 """
 
 # Sample for Windows:
-# python .github/scripts/check_language_toml.py --reference-file frontend/editor/public/locales/en-GB/translation.toml --branch "" --files frontend/editor/public/locales/de-DE/translation.toml frontend/editor/public/locales/fr-FR/translation.toml
+# python .github/scripts/check_language_toml.py --reference-file frontend/editor/public/locales/en-US/translation.toml --branch "" --files frontend/editor/public/locales/de-DE/translation.toml frontend/editor/public/locales/fr-FR/translation.toml
 
 import argparse
 import glob
@@ -184,7 +184,7 @@ def check_for_differences(reference_file, file_list, branch, actor):
     if len(file_list) == 1:
         file_arr = file_list[0].split()
 
-    base_dir = Path.cwd() / "frontend" / "public" / "locales"
+    base_dir = Path.cwd() / "frontend" / "editor" / "public" / "locales"
 
     for file_path in file_arr:
         file_path = Path(file_path)
@@ -211,7 +211,7 @@ def check_for_differences(reference_file, file_list, branch, actor):
             )
             continue
 
-        if basename_current_file == basename_reference_file and locale_dir == "en-GB":
+        if basename_current_file == basename_reference_file and locale_dir == "en-US":
             continue
 
         if (
@@ -308,7 +308,7 @@ def check_for_differences(reference_file, file_list, branch, actor):
         report.append("## ❌ Overall Check Status: **_Failed_**")
         report.append("")
         report.append(
-            f"@{actor} please check your translation if it conforms to the standard. Follow the format of [en-GB/translation.toml](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/frontend/editor/public/locales/en-GB/translation.toml)"
+            f"@{actor} please check your translation if it conforms to the standard. Follow the format of [en-US/translation.toml](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/frontend/editor/public/locales/en-US/translation.toml)"
         )
     else:
         report.append("## ✅ Overall Check Status: **_Success_**")
@@ -372,6 +372,7 @@ if __name__ == "__main__":
                 os.path.join(
                     os.getcwd(),
                     "frontend",
+                    "editor",
                     "public",
                     "locales",
                     "*",

.github/scripts/verify-updater-signatures.py

@@ -0,0 +1,83 @@
+#!/usr/bin/env python3
+"""Verify Tauri updater .sig files against plugins.updater.pubkey in tauri.conf.json.
+
+Usage: verify-updater-signatures.py <dir-to-scan> [tauri.conf.json]
+"""
+
+import binascii
+import sys
+import json
+import base64
+import hashlib
+from pathlib import Path
+from cryptography.hazmat.primitives.asymmetric.ed25519 import Ed25519PublicKey
+from cryptography.exceptions import InvalidSignature
+
+ART_ROOT = Path(sys.argv[1])
+CONF = Path(
+    sys.argv[2] if len(sys.argv) > 2 else "frontend/editor/src-tauri/tauri.conf.json"
+)
+
+
+def load_pubkey():
+    # tauri pubkey = base64 of a minisign .pub file; last line is base64 of
+    # [2 algo][8 key-id][32 ed25519 public key].
+    raw = json.loads(CONF.read_text())["plugins"]["updater"]["pubkey"]
+    blob = base64.b64decode(base64.b64decode(raw).decode().splitlines()[-1])
+    return blob[2:10], Ed25519PublicKey.from_public_bytes(blob[10:])
+
+
+def hash_file(path: Path) -> bytes:
+    h = hashlib.blake2b(digest_size=64)
+    with path.open("rb") as f:
+        for chunk in iter(lambda: f.read(1 << 16), b""):
+            h.update(chunk)
+    return h.digest()
+
+
+def verify(artifact: Path, sig_file: Path, keyid_pub, pub) -> str:
+    # tauri .sig = base64 of a minisign signature file (4 lines).
+    try:
+        lines = base64.b64decode(sig_file.read_text()).decode().splitlines()
+        sig_blob = base64.b64decode(lines[1])
+    except (binascii.Error, IndexError, UnicodeDecodeError) as e:
+        return f"FAIL malformed sig ({type(e).__name__})"
+    algo, keyid, sig = sig_blob[:2], sig_blob[2:10], sig_blob[10:74]
+    if keyid != keyid_pub:
+        return f"FAIL key-id mismatch (sig {keyid.hex()} vs pub {keyid_pub.hex()})"
+    # 'ED' = prehashed (BLAKE2b-512), 'Ed' = legacy (raw message).
+    msg = hash_file(artifact) if algo == b"ED" else artifact.read_bytes()
+    try:
+        pub.verify(sig, msg)
+    except InvalidSignature:
+        return f"FAIL signature invalid (algo={algo.decode()})"
+    # Global signature covers sig + trusted_comment.
+    gc = "global-sig FAIL"
+    try:
+        tc = lines[2].split("trusted comment: ", 1)[1]
+        pub.verify(base64.b64decode(lines[3]), sig + tc.encode())
+        gc = "global-sig OK"
+    except (InvalidSignature, IndexError, binascii.Error):
+        pass
+    return f"VALID (algo={algo.decode()}, keyid={keyid.hex()}, {gc})"
+
+
+keyid_pub, pub = load_pubkey()
+print(f"updater pubkey keyid={keyid_pub.hex()}\n")
+sigs = sorted(ART_ROOT.rglob("*.sig"))
+if not sigs:
+    print(f"WARN: no .sig files under {ART_ROOT} - nothing to verify")
+    sys.exit(0)
+bad = 0
+for sig_file in sigs:
+    artifact = sig_file.with_suffix("")
+    if not artifact.exists():
+        print(f"  ? {sig_file.name}: artifact missing")
+        bad += 1
+        continue
+    res = verify(artifact, sig_file, keyid_pub, pub)
+    print(f"  {artifact.name}: {res}")
+    if not res.startswith("VALID") or "global-sig FAIL" in res:
+        bad += 1
+print(f"\n{'ALL SIGNATURES VALID' if bad == 0 else f'{bad} SIGNATURE(S) FAILED'}")
+sys.exit(1 if bad else 0)

.github/workflows/PR-Auto-Deploy-V2.yml

@@ -239,7 +239,7 @@ jobs:
 
       - name: Build and push V2 image (Depot)
         if: env.USE_DEPOT == 'true' && steps.check-image.outputs.exists == 'false'
-        uses: depot/build-push-action@5f3b3c2e5a00f0093de47f657aeaefcedff27d18 # v1.16.0
+        uses: depot/build-push-action@98e78adca7817480b8185f474a400b451d74e287 # v1.16.0
         with:
           project: ${{ vars.DEPOT_PROJECT_ID }}
           context: .
@@ -293,7 +293,7 @@ jobs:
                 SECURITY_ENABLELOGIN: "true"
                 SECURITY_INITIALLOGIN_USERNAME: "${{ secrets.TEST_LOGIN_USERNAME }}"
                 SECURITY_INITIALLOGIN_PASSWORD: "${{ secrets.TEST_LOGIN_PASSWORD }}"
-                SYSTEM_DEFAULTLOCALE: en-GB
+                SYSTEM_DEFAULTLOCALE: en-US
                 UI_APPNAME: "Stirling-PDF V2 PR#${{ needs.check-pr.outputs.pr_number }}"
                 UI_HOMEDESCRIPTION: "V2 PR#${{ needs.check-pr.outputs.pr_number }} - Embedded Architecture"
                 UI_APPNAMENAVBAR: "V2 PR#${{ needs.check-pr.outputs.pr_number }}"

.github/workflows/PR-Demo-Comment-with-react.yml

@@ -222,10 +222,10 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Run Gradle Command
         run: |
           if [ "${{ needs.check-comment.outputs.disable_security }}" == "true" ]; then
@@ -256,7 +256,7 @@ jobs:
 
       - name: Build and push PR-specific image (Depot)
         if: env.USE_DEPOT == 'true'
-        uses: depot/build-push-action@5f3b3c2e5a00f0093de47f657aeaefcedff27d18 # v1.16.0
+        uses: depot/build-push-action@98e78adca7817480b8185f474a400b451d74e287 # v1.16.0
         with:
           project: ${{ vars.DEPOT_PROJECT_ID }}
           context: .
@@ -285,7 +285,7 @@ jobs:
 
       - name: Build and push engine image (Depot)
         if: env.USE_DEPOT == 'true' && needs.check-comment.outputs.enable_prototypes == 'true'
-        uses: depot/build-push-action@5f3b3c2e5a00f0093de47f657aeaefcedff27d18 # v1.16.0
+        uses: depot/build-push-action@98e78adca7817480b8185f474a400b451d74e287 # v1.16.0
         with:
           project: ${{ vars.DEPOT_PROJECT_ID }}
           context: ./engine
@@ -388,7 +388,7 @@ jobs:
               environment:
                 DISABLE_ADDITIONAL_FEATURES: "${DISABLE_ADDITIONAL_FEATURES}"
                 SECURITY_ENABLELOGIN: "${LOGIN_SECURITY}"
-                SYSTEM_DEFAULTLOCALE: en-GB
+                SYSTEM_DEFAULTLOCALE: en-US
                 UI_APPNAME: "Stirling-PDF PR#${PR_NUMBER}"
                 UI_HOMEDESCRIPTION: "PR#${PR_NUMBER} for Stirling-PDF Latest"
                 UI_APPNAMENAVBAR: "PR#${PR_NUMBER}"

.github/workflows/ai-engine.yml

@@ -1,8 +1,9 @@
 name: AI Engine CI
 
-# Validates the Python AI engine: regenerates tool models, runs fixers,
-# lint, type-check, and tests. Called from build.yml on PRs and merge_group;
-# also runs directly on push to main as a post-merge safety net.
+# Validates the Python AI engine: regenerates tool models and runs the
+# engine quality gate (lint, type-check, format-check, tests). Called from
+# build.yml on PRs and merge_group; also runs directly on push to main as
+# a post-merge safety net.
 on:
   workflow_call:
   push:
@@ -42,36 +43,104 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
 
       - name: Regenerate tool models
         run: task engine:tool-models
 
       - name: Verify tool models are up to date
+        id: tool-models-check
+        continue-on-error: true
+        run: git diff --exit-code engine/src/stirling/models/tool_models.py
+
+      - name: Comment on tool models check failure
+        # Only post a comment on PRs. github-script's PR helpers need an
+        # issue/PR number, which doesn't exist on merge_group runs.
+        if: steps.tool-models-check.outcome == 'failure' && github.event_name == 'pull_request'
+        continue-on-error: true
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          script: |
+            const marker = '<!-- tool-models-check -->';
+            const body = [
+              marker,
+              '### Tool Models Check Failed',
+              '',
+              'The generated `engine/src/stirling/models/tool_models.py` is out of date with the Java OpenAPI spec and will need to be regenerated before it can be merged in.',
+              '',
+              'Run `task engine:tool-models` to regenerate, then commit the updated file.',
+            ].join('\n');
+            const { data: comments } = await github.rest.issues.listComments({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number,
+            });
+            const existing = comments.find(c => c.body.includes(marker));
+            if (existing) {
+              await github.rest.issues.updateComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                comment_id: existing.id,
+                body,
+              });
+            } else {
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: context.issue.number,
+                body,
+              });
+            }
+
+      - name: Fail if tool models check failed
+        if: steps.tool-models-check.outcome == 'failure'
         run: |
-          if ! git diff --exit-code engine/src/stirling/models/tool_models.py; then
-            echo "tool_models.py is out of date."
-            echo "Run 'task engine:tool-models' locally and commit the updated file."
-            exit 1
-          fi
+          echo "============================================"
+          echo "  Tool Models Check Failed"
+          echo "============================================"
+          echo ""
+          echo "The generated engine/src/stirling/models/tool_models.py"
+          echo "is out of date with the Java OpenAPI spec and will"
+          echo "need to be regenerated before it can be merged in."
+          echo ""
+          echo "Run 'task engine:tool-models' to regenerate, then"
+          echo "commit the updated file."
+          echo "============================================"
+          exit 1
 
-      - name: Run fixers
-        run: task engine:fix
+      - name: Remove tool models check comment on success
+        if: steps.tool-models-check.outcome == 'success' && github.event_name == 'pull_request'
+        continue-on-error: true
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          script: |
+            const marker = '<!-- tool-models-check -->';
+            const { data: comments } = await github.rest.issues.listComments({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number,
+            });
+            const existing = comments.find(c => c.body.includes(marker));
+            if (existing) {
+              await github.rest.issues.deleteComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                comment_id: existing.id,
+              });
+            }
 
-      - name: Verify fixes are committed
-        id: fixer_changes
-        run: |
-          if ! git diff --quiet; then
-            git --no-pager diff --stat
-            echo "::error::There are issues with your Python code that will need to be fixed before they can be merged in. Run 'task engine:fix' to auto-fix what can be fixed automatically, then run 'task engine:check' to see what still needs fixing manually."
-            exit 1
-          fi
+      - name: Quality-check engine
+        id: engine-check
+        run: task engine:check
+        continue-on-error: true
 
-      - name: Comment on fixer failures
-        if: steps.fixer_changes.outcome == 'failure' && github.event_name == 'pull_request'
+      - name: Comment on engine check failure
+        # Only post a comment on PRs. github-script's PR helpers need an
+        # issue/PR number, which doesn't exist on merge_group runs.
+        if: steps.engine-check.outcome == 'failure' && github.event_name == 'pull_request'
         continue-on-error: true
         uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
         with:
@@ -107,11 +176,39 @@ jobs:
               });
             }
 
-      - name: Run linting
-        run: task engine:lint
+      - name: Fail if engine check failed
+        if: steps.engine-check.outcome == 'failure'
+        run: |
+          echo "============================================"
+          echo "  Engine Check Failed"
+          echo "============================================"
+          echo ""
+          echo "There are issues with your Python code that"
+          echo "will need to be fixed before they can be merged in."
+          echo ""
+          echo "Run 'task engine:fix' to auto-fix what can be"
+          echo "fixed automatically, then run 'task engine:check'"
+          echo "to see what still needs fixing manually."
+          echo "============================================"
+          exit 1
 
-      - name: Run type checking
-        run: task engine:typecheck
-
-      - name: Run tests
-        run: task engine:test
+      - name: Remove engine check comment on success
+        if: steps.engine-check.outcome == 'success' && github.event_name == 'pull_request'
+        continue-on-error: true
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          script: |
+            const marker = '<!-- engine-check -->';
+            const { data: comments } = await github.rest.issues.listComments({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number,
+            });
+            const existing = comments.find(c => c.body.includes(marker));
+            if (existing) {
+              await github.rest.issues.deleteComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                comment_id: existing.id,
+              });
+            }

.github/workflows/backend-build.yml

@@ -1,8 +1,14 @@
 name: Backend build, format check, and coverage
 
 # Reusable workflow called from build.yml. Runs the backend build matrix
-# (JDK 25 × spring-security on/off), Spotless formatting check, JUnit, and
+# (JDK 25 × every flavor), Spotless formatting check, JUnit, and
 # posts Jacoco coverage to PRs.
+#
+# Flavor axis (maps to STIRLING_FLAVOR in settings.gradle):
+#   core         - DISABLE_ADDITIONAL_FEATURES=true, no proprietary, no saas
+#   proprietary  - default build, no saas
+#   saas         - proprietary + the saas subproject (build + JUnit only,
+#                  never any runtime/integration testing)
 on:
   workflow_call:
 
@@ -25,7 +31,7 @@ jobs:
       fail-fast: false
       matrix:
         jdk-version: [25]
-        spring-security: [true, false]
+        flavor: [core, proprietary, saas]
     steps:
       - name: Harden Runner
         uses: step-security/harden-runner@ab7a9404c0f3da075243ca237b5fac12c98deaa5 # v2.19.3
@@ -52,13 +58,16 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
           cache-disabled: true
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Check Java formatting (Spotless)
-        if: matrix.jdk-version == 25 && matrix.spring-security == false
+        # Runs once per matrix combination - pick the cheapest leg
+        # (core - no proprietary, no saas) so we don't wait for the
+        # heavier flavors just to fail formatting.
+        if: matrix.jdk-version == 25 && matrix.flavor == 'core'
         id: spotless-check
         run: task backend:format:check
         continue-on-error: true
@@ -67,7 +76,7 @@ jobs:
           MAVEN_PASSWORD: ${{ secrets.MAVEN_PASSWORD }}
           MAVEN_PUBLIC_URL: ${{ secrets.MAVEN_PUBLIC_URL }}
 
-      - name: Comment on Java formatting failure
+      - name: Comment on backend format check failure
         # Only post a comment on PRs. github-script's PR helpers need an
         # issue/PR number, which doesn't exist on merge_group runs.
         if: steps.spotless-check.outcome == 'failure' && github.event_name == 'pull_request'
@@ -78,15 +87,11 @@ jobs:
             const marker = '<!-- java-formatting-check -->';
             const body = [
               marker,
-              '### Java Formatting Check Failed',
+              '### Backend Format Check Failed',
               '',
-              'Your code has formatting issues. Run the following command to fix them:',
+              'There are formatting issues in your Java code that will need to be fixed before they can be merged in.',
               '',
-              '```bash',
-              'task backend:format',
-              '```',
-              '',
-              'Then commit and push the changes.',
+              'Run `task backend:format` to auto-fix, then commit and push the changes.',
             ].join('\n');
             const { data: comments } = await github.rest.issues.listComments({
               owner: context.repo.owner,
@@ -110,33 +115,61 @@ jobs:
               });
             }
 
-      - name: Fail if Java formatting issues found
+      - name: Fail if backend format check failed
         if: steps.spotless-check.outcome == 'failure'
         run: |
           echo "============================================"
-          echo "  Java Formatting Check Failed"
+          echo "  Backend Format Check Failed"
           echo "============================================"
           echo ""
-          echo "Your code has formatting issues."
-          echo "Run the following command to fix them:"
+          echo "There are formatting issues in your Java code"
+          echo "that will need to be fixed before they can be"
+          echo "merged in."
           echo ""
-          echo "  task backend:format"
-          echo ""
-          echo "Then commit and push the changes."
+          echo "Run 'task backend:format' to auto-fix, then"
+          echo "commit and push the changes."
           echo "============================================"
           exit 1
 
-      - name: Build with Gradle and spring security ${{ matrix.spring-security }}
+      - name: Remove backend format check comment on success
+        if: steps.spotless-check.outcome == 'success' && github.event_name == 'pull_request'
+        continue-on-error: true
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          script: |
+            const marker = '<!-- java-formatting-check -->';
+            const { data: comments } = await github.rest.issues.listComments({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number,
+            });
+            const existing = comments.find(c => c.body.includes(marker));
+            if (existing) {
+              await github.rest.issues.deleteComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                comment_id: existing.id,
+              });
+            }
+
+      - name: Build with Gradle (flavor=${{ matrix.flavor }})
+        # STIRLING_FLAVOR is read by settings.gradle and expands into the
+        # right combination of DISABLE_ADDITIONAL_FEATURES + ENABLE_SAAS
+        # so we don't have to set them by hand. The saas flavor pulls in
+        # the app/saas subproject (unit tests only - no runtime tests).
         run: task backend:build:ci
         env:
           MAVEN_USER: ${{ secrets.MAVEN_USER }}
           MAVEN_PASSWORD: ${{ secrets.MAVEN_PASSWORD }}
           MAVEN_PUBLIC_URL: ${{ secrets.MAVEN_PUBLIC_URL }}
-          DISABLE_ADDITIONAL_FEATURES: ${{ matrix.spring-security }}
+          STIRLING_FLAVOR: ${{ matrix.flavor }}
 
       - name: Check Test Reports Exist
         if: always()
         run: |
+          # Common + core + proprietary always build (proprietary is
+          # excluded only at runtime, not from the gradle subproject
+          # graph). Saas builds add a fourth report dir.
           declare -a dirs=(
             "app/core/build/reports/tests/"
             "app/core/build/test-results/"
@@ -145,6 +178,9 @@ jobs:
             "app/proprietary/build/reports/tests/"
             "app/proprietary/build/test-results/"
           )
+          if [ "${{ matrix.flavor }}" = "saas" ]; then
+            dirs+=("app/saas/build/reports/tests/" "app/saas/build/test-results/")
+          fi
           for dir in "${dirs[@]}"; do
             if [ ! -d "$dir" ]; then
               echo "Missing $dir"
@@ -156,7 +192,7 @@ jobs:
         if: always()
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
-          name: test-reports-jdk-${{ matrix.jdk-version }}-spring-security-${{ matrix.spring-security }}
+          name: test-reports-jdk-${{ matrix.jdk-version }}-flavor-${{ matrix.flavor }}
           path: |
             app/**/build/reports/jacoco/test
             app/**/build/reports/tests/
@@ -166,7 +202,47 @@ jobs:
           retention-days: 3
           if-no-files-found: warn
 
-      - name: Add coverage to PR with spring security ${{ matrix.spring-security }} and JDK ${{ matrix.jdk-version }}
+      - name: Install defusedxml for coverage summary
+        # coverage-summary.py parses JaCoCo XML through defusedxml to
+        # silence security scanners that pattern-match on the stdlib
+        # xml.etree.ElementTree.parse call.
+        if: always() && matrix.flavor == 'saas'
+        run: python -m pip install --quiet defusedxml
+
+      - name: JaCoCo coverage step summary
+        # Only the saas leg posts the JUnit summary - it's a strict
+        # superset of the core + proprietary legs (same .exec files plus
+        # the saas subproject). Posting from all three would mean three
+        # near-identical tables crowding out the aggregate report.
+        if: always() && matrix.flavor == 'saas'
+        run: |
+          python scripts/coverage-summary.py \
+            --title "Backend JUnit coverage (JDK ${{ matrix.jdk-version }})" \
+            --jacoco "common=app/common/build/reports/jacoco/test/jacocoTestReport.xml" \
+            --jacoco "core=app/core/build/reports/jacoco/test/jacocoTestReport.xml" \
+            --jacoco "proprietary=app/proprietary/build/reports/jacoco/test/jacocoTestReport.xml" \
+            --jacoco "saas=app/saas/build/reports/jacoco/test/jacocoTestReport.xml" \
+            --github-step-summary
+
+      - name: Upload raw JUnit .exec for aggregate merge
+        # Same dedup rationale as the summary step: upload from the saas
+        # leg only (the most complete set, includes app/saas/.../test.exec)
+        # so the aggregate workflow merges the union rather than three
+        # overlapping subsets.
+        #
+        # Separate artifact from the HTML reports so the aggregate
+        # workflow can grab just the .exec files with a name pattern
+        # (`jacoco-exec-*`) instead of unpacking the whole test-reports
+        # tarball.
+        if: always() && matrix.flavor == 'saas'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: jacoco-exec-junit-jdk-${{ matrix.jdk-version }}
+          path: app/*/build/jacoco/*.exec
+          retention-days: 7
+          if-no-files-found: warn
+
+      - name: Add coverage to PR (flavor=${{ matrix.flavor }}, JDK=${{ matrix.jdk-version }})
         # The action only supports the pull_request event (it posts a PR comment),
         # so skip it for merge_group runs and workflow_dispatch.
         if: github.event_name == 'pull_request'

.github/workflows/build-enterprise.yml

@@ -78,7 +78,7 @@ jobs:
           cache: "npm"
           cache-dependency-path: frontend/package-lock.json
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Install Playwright (chromium only)
         run: task e2e:install -- chromium
       - name: Build frontend (needed for playwright's vite preview webServer)

.github/workflows/build.yml

@@ -185,6 +185,24 @@ jobs:
     uses: ./.github/workflows/dependency-review.yml
     secrets: inherit
 
+  # Coverage aggregate: merges the JUnit + e2e:live + cucumber .exec
+  # artifacts produced by the jobs above into one report, plus pulls
+  # in vitest + Playwright frontend coverage for the per-area matrix.
+  # `if: always()` so a producer failing partway still gets credit
+  # for whatever did record. Advisory only - intentionally NOT in
+  # all-checks-passed, so a flaky aggregate run never blocks merging.
+  coverage-aggregate:
+    if: always()
+    needs:
+      - build
+      - playwright-e2e-live
+      - docker-compose-tests
+      - frontend-validation
+    permissions:
+      contents: read
+    uses: ./.github/workflows/coverage-aggregate.yml
+    secrets: inherit
+
   # Single status check that branch protection should mark as required.
   # Succeeds when every upstream job is either `success` or `skipped` (path-
   # gated jobs that didn't apply this run). Any `failure` or `cancelled`

.github/workflows/check-licence.yml

@@ -40,11 +40,11 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
           cache-disabled: true
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Check licenses for compatibility
         run: task backend:licenses:check
         env:

.github/workflows/check-openapi.yml

@@ -45,11 +45,11 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
           cache-disabled: true
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Generate OpenAPI documentation
         run: task backend:swagger
         env:

.github/workflows/check_toml.yml

@@ -166,16 +166,16 @@ jobs:
 
             // Determine reference file
             let referenceFilePath;
-            if (changedFiles.includes("frontend/editor/public/locales/en-GB/translation.toml")) {
+            if (changedFiles.includes("frontend/editor/public/locales/en-US/translation.toml")) {
               console.log("Using PR branch reference file.");
               const { data: fileContent } = await github.rest.repos.getContent({
                 owner: prRepoOwner,
                 repo: prRepoName,
-                path: "frontend/editor/public/locales/en-GB/translation.toml",
+                path: "frontend/editor/public/locales/en-US/translation.toml",
                 ref: branch,
               });
 
-              referenceFilePath = "pr-branch-translation-en-GB.toml";
+              referenceFilePath = "pr-branch-translation-en-US.toml";
               const content = Buffer.from(fileContent.content, "base64").toString("utf-8");
               fs.writeFileSync(referenceFilePath, content);
             } else {
@@ -183,11 +183,11 @@ jobs:
               const { data: fileContent } = await github.rest.repos.getContent({
                 owner: repoOwner,
                 repo: repoName,
-                path: "frontend/editor/public/locales/en-GB/translation.toml",
+                path: "frontend/editor/public/locales/en-US/translation.toml",
                 ref: "main",
               });
 
-              referenceFilePath = "main-branch-translation-en-GB.toml";
+              referenceFilePath = "main-branch-translation-en-US.toml";
               const content = Buffer.from(fileContent.content, "base64").toString("utf-8");
               fs.writeFileSync(referenceFilePath, content);
             }
@@ -293,6 +293,6 @@ jobs:
         run: |
           echo "Cleaning up temporary files..."
           rm -rf pr-branch
-          rm -f pr-branch-translation-en-GB.toml main-branch-translation-en-GB.toml changed_files.txt result.txt
+          rm -f pr-branch-translation-en-US.toml main-branch-translation-en-US.toml changed_files.txt result.txt
           echo "Cleanup complete."
         continue-on-error: true # Ensure cleanup runs even if previous steps fail

.github/workflows/coverage-aggregate.yml

@@ -0,0 +1,230 @@
+name: Aggregate backend coverage
+
+# Reusable workflow called from build.yml after every backend coverage
+# producer (JUnit, e2e:live, cucumber) has run. Downloads each job's raw
+# .exec, merges them into one JaCoCo report, and posts a combined step
+# summary alongside the per-source ones.
+#
+# Kept separate from the per-source jobs so:
+#   - the per-source jobs stay fast and independent (no cross-job waits)
+#   - this job can `if: always()` and still produce something useful when
+#     one of the producers fails partway through
+#   - frontend producers can be added later without touching the
+#     producers themselves
+on:
+  workflow_call:
+
+permissions:
+  contents: read
+
+jobs:
+  pick:
+    uses: ./.github/workflows/_runner-pick.yml
+
+  aggregate:
+    needs: pick
+    runs-on: ${{ needs.pick.outputs.is_fork == 'true' && 'ubuntu-latest' || 'depot-ubuntu-24.04-4' }}
+    timeout-minutes: 15
+    steps:
+      - name: Harden Runner
+        uses: step-security/harden-runner@ab7a9404c0f3da075243ca237b5fac12c98deaa5 # v2.19.3
+        with:
+          egress-policy: audit
+      - name: Checkout repository
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+
+      - name: Set up JDK 25
+        uses: actions/setup-java@be666c2fcd27ec809703dec50e508c2fdc7f6654 # v5.2.0
+        with:
+          java-version: "25"
+          distribution: "temurin"
+
+      - name: Cache Gradle dependency artifacts
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: |
+            ~/.gradle/wrapper
+            ~/.gradle/caches/modules-2/files-2.1
+            ~/.gradle/caches/modules-2/metadata-2.*
+          key: gradle-deps-${{ runner.os }}-jdk-25-${{ hashFiles('**/gradle/wrapper/gradle-wrapper.properties', '**/*.gradle', '**/*.gradle.kts', 'settings.gradle', 'settings.gradle.kts', 'gradle/libs.versions.toml') }}
+
+      - name: Setup Gradle
+        uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
+        with:
+          gradle-version: 9.3.1
+          cache-disabled: true
+
+      - name: Set up Python
+        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
+        with:
+          python-version: "3.12"
+
+      - name: Install defusedxml for coverage scripts
+        # Both coverage-summary.py and coverage-matrix.py parse JaCoCo
+        # XML through defusedxml - see the script headers for context.
+        run: python -m pip install --quiet defusedxml
+
+      # Pattern matches every artifact this PR's producers might upload:
+      #   jacoco-exec-junit-jdk-25            (uploaded only by the saas
+      #                                         leg of backend-build, which
+      #                                         is a strict superset of the
+      #                                         core + proprietary legs)
+      #   jacoco-exec-e2e-live
+      #   jacoco-exec-cucumber
+      # Each lands as a sibling dir under coverage-execs/, with the .exec
+      # files preserving their original relative paths.
+      - name: Download all .exec artifacts
+        uses: actions/download-artifact@d3f86a106a0bac45b974a628896c90dbdf5c8093 # v6.0.0
+        with:
+          pattern: jacoco-exec-*
+          path: coverage-execs/
+          merge-multiple: false
+        continue-on-error: true
+
+      - name: Inventory .exec files
+        id: inventory
+        # Splits the downloaded artifacts into two buckets:
+        #   * e2e-only  = cucumber + Playwright live (user-flow coverage)
+        #   * all       = the above plus JUnit (everything we test)
+        #
+        # Bucketing is by artifact-name prefix: download-artifact preserves
+        # the artifact name as the top-level dir, so JUnit's `.exec`s live
+        # under coverage-execs/jacoco-exec-junit-*/... while the others
+        # are under coverage-execs/jacoco-exec-{e2e-live,cucumber}/...
+        #
+        # If nothing was uploaded (e.g. all producers crashed before
+        # writing) we exit gracefully so this advisory job never fails CI.
+        run: |
+          mapfile -t all_execs < <(find coverage-execs -name '*.exec' -type f | sort)
+          mapfile -t e2e_execs < <(find coverage-execs -name '*.exec' -type f -not -path '*/jacoco-exec-junit-*' | sort)
+          if [ "${#all_execs[@]}" -eq 0 ]; then
+            echo "::warning::No .exec artifacts found - skipping aggregate report"
+            echo "found_all=false" >> "$GITHUB_OUTPUT"
+            echo "found_e2e=false" >> "$GITHUB_OUTPUT"
+            exit 0
+          fi
+          printf 'All %d .exec files:\n' "${#all_execs[@]}"
+          printf '  %s\n' "${all_execs[@]}"
+          IFS=','; all_joined="${all_execs[*]}"
+          echo "files_all=$all_joined" >> "$GITHUB_OUTPUT"
+          echo "found_all=true" >> "$GITHUB_OUTPUT"
+          if [ "${#e2e_execs[@]}" -eq 0 ]; then
+            echo "::notice::No e2e/cucumber .exec files - e2e-only report will be skipped"
+            echo "found_e2e=false" >> "$GITHUB_OUTPUT"
+          else
+            printf 'E2E-only %d .exec files:\n' "${#e2e_execs[@]}"
+            printf '  %s\n' "${e2e_execs[@]}"
+            unset IFS
+            IFS=','; e2e_joined="${e2e_execs[*]}"
+            echo "files_e2e=$e2e_joined" >> "$GITHUB_OUTPUT"
+            echo "found_e2e=true" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Compile classes for JaCoCo class lookup
+        # jacocoReportFromExec only needs the compiled .class files
+        # under each subproject's build/classes/java/main/. `classes`
+        # (compileJava + processResources) is enough; we skipped the
+        # heavier `assemble` to avoid building bootJar / fat jars that
+        # add 60+ seconds per run for no gain to the report.
+        if: steps.inventory.outputs.found_all == 'true'
+        run: ./gradlew classes -PnoSpotless
+
+      - name: Generate e2e-only JaCoCo report
+        # "Real user-flow" coverage: only counts code reached by an actual
+        # HTTP request from cucumber or live Playwright. Useful for
+        # questions like "how much of our backend does a user actually
+        # hit?". Skipped when neither producer uploaded a .exec.
+        if: steps.inventory.outputs.found_e2e == 'true'
+        run: |
+          ./gradlew jacocoReportFromExec \
+            -PexecFile="${{ steps.inventory.outputs.files_e2e }}" \
+            -PreportDir=build/reports/jacoco/aggregate-e2e \
+            -PnoSpotless
+
+      - name: Generate combined JaCoCo report (everything)
+        if: steps.inventory.outputs.found_all == 'true'
+        run: |
+          ./gradlew jacocoReportFromExec \
+            -PexecFile="${{ steps.inventory.outputs.files_all }}" \
+            -PreportDir=build/reports/jacoco/aggregate-all \
+            -PnoSpotless
+
+      - name: E2E-only step summary
+        # Rendered first so it gets prime real estate in the Summary
+        # tab - this is the number most readers actually want
+        # ("how much of the backend do real user flows cover?").
+        if: steps.inventory.outputs.found_e2e == 'true'
+        run: |
+          python scripts/coverage-summary.py \
+            --title "Real user-flow backend coverage (e2e:live + cucumber)" \
+            --jacoco "merged=build/reports/jacoco/aggregate-e2e/jacocoTestReport.xml" \
+            --github-step-summary
+
+      - name: ALL-sources step summary
+        # Separate call (not a multi-input one) because the helper's
+        # rightmost "Aggregate" column would sum the two reports - which
+        # is meaningless when one is a strict superset of the other.
+        if: steps.inventory.outputs.found_all == 'true'
+        run: |
+          python scripts/coverage-summary.py \
+            --title "Combined backend coverage (JUnit + e2e:live + cucumber)" \
+            --jacoco "merged=build/reports/jacoco/aggregate-all/jacocoTestReport.xml" \
+            --github-step-summary
+
+      - name: Upload combined aggregate report
+        if: steps.inventory.outputs.found_all == 'true'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: jacoco-aggregate-all-${{ github.run_id }}
+          path: build/reports/jacoco/aggregate-all/
+          retention-days: 14
+
+      - name: Upload e2e-only aggregate report
+        if: steps.inventory.outputs.found_e2e == 'true'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: jacoco-aggregate-e2e-${{ github.run_id }}
+          path: build/reports/jacoco/aggregate-e2e/
+          retention-days: 14
+
+      # --------------------------------------------------------------
+      # Per-area matrix: rolls backend + frontend coverage into one
+      # table indexed by core/proprietary/saas/desktop. Pulls the
+      # frontend artifacts now (after the JaCoCo step has done its
+      # work) so the per-source backend summaries still render first
+      # even if the matrix step fails.
+      # --------------------------------------------------------------
+      - name: Download vitest coverage artifact
+        # frontend-validation uploads as `frontend-coverage`. Tolerate
+        # absence so a backend-only PR still produces the matrix with
+        # just backend rows populated.
+        if: always()
+        uses: actions/download-artifact@d3f86a106a0bac45b974a628896c90dbdf5c8093 # v6.0.0
+        with:
+          name: frontend-coverage
+          path: matrix-inputs/vitest/
+        continue-on-error: true
+
+      - name: Download Playwright frontend coverage artifact
+        # e2e-live uploads as `playwright-frontend-coverage-<run_id>`.
+        # Same tolerance as vitest - matrix script handles missing inputs.
+        if: always()
+        uses: actions/download-artifact@d3f86a106a0bac45b974a628896c90dbdf5c8093 # v6.0.0
+        with:
+          name: playwright-frontend-coverage-${{ github.run_id }}
+          path: matrix-inputs/playwright/
+        continue-on-error: true
+
+      - name: Coverage matrix step summary
+        if: always()
+        # Matrix references the two aggregate JaCoCo XMLs (already
+        # generated above) plus whichever frontend artifacts landed.
+        # Every input is optional; missing ones render as "-".
+        run: |
+          python scripts/coverage-matrix.py \
+            ${{ steps.inventory.outputs.found_all == 'true' && '--jacoco-all build/reports/jacoco/aggregate-all/jacocoTestReport.xml' || '' }} \
+            ${{ steps.inventory.outputs.found_e2e == 'true' && '--jacoco-e2e build/reports/jacoco/aggregate-e2e/jacocoTestReport.xml' || '' }} \
+            --vitest matrix-inputs/vitest/coverage-summary.json \
+            --playwright-frontend matrix-inputs/playwright/coverage-pw-summary/coverage-summary.json \
+            --title "Coverage matrix (per-area, e2e vs all)" \
+            --github-step-summary

.github/workflows/db-migration-test.yml

@@ -48,7 +48,7 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
           cache-disabled: true
 
       # No `-PnoSpotless` here yet because the upstream cache layer matches the

.github/workflows/deploy-on-v2-commit.yml

@@ -107,7 +107,7 @@ jobs:
 
       - name: Build and push frontend image (Depot)
         if: env.USE_DEPOT == 'true' && steps.check-frontend.outputs.exists == 'false'
-        uses: depot/build-push-action@5f3b3c2e5a00f0093de47f657aeaefcedff27d18 # v1.16.0
+        uses: depot/build-push-action@98e78adca7817480b8185f474a400b451d74e287 # v1.16.0
         with:
           project: ${{ vars.DEPOT_PROJECT_ID }}
           context: .
@@ -136,7 +136,7 @@ jobs:
 
       - name: Build and push backend image (Depot)
         if: env.USE_DEPOT == 'true' && steps.check-backend.outputs.exists == 'false'
-        uses: depot/build-push-action@5f3b3c2e5a00f0093de47f657aeaefcedff27d18 # v1.16.0
+        uses: depot/build-push-action@98e78adca7817480b8185f474a400b451d74e287 # v1.16.0
         with:
           project: ${{ vars.DEPOT_PROJECT_ID }}
           context: .
@@ -188,7 +188,7 @@ jobs:
               environment:
                 DISABLE_ADDITIONAL_FEATURES: "true"
                 SECURITY_ENABLELOGIN: "false"
-                SYSTEM_DEFAULTLOCALE: en-GB
+                SYSTEM_DEFAULTLOCALE: en-US
                 UI_APPNAME: "Stirling-PDF V2"
                 UI_HOMEDESCRIPTION: "V2 Frontend/Backend Split"
                 UI_APPNAMENAVBAR: "V2 Deployment"

.github/workflows/docker-compose-tests.yml

@@ -61,7 +61,7 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
           cache-disabled: true
 
       - name: Set up Docker Buildx
@@ -87,6 +87,12 @@ jobs:
         run: |
           pip install --require-hashes --only-binary=:all: -r ./testing/cucumber/requirements.txt
 
+      - name: Extract JaCoCo agent for cucumber coverage
+        # Stages build/jacoco/jacocoagent.jar where the coverage override
+        # file bind-mounts it into the cucumber container. The agent jar
+        # never goes into the published image - this is host-only.
+        run: ./gradlew copyJacocoAgent -PnoSpotless
+
       - name: Run Docker Compose Tests
         run: |
           chmod +x ./testing/test_webpages.sh
@@ -98,6 +104,62 @@ jobs:
           MAVEN_PASSWORD: ${{ secrets.MAVEN_PASSWORD }}
           MAVEN_PUBLIC_URL: ${{ secrets.MAVEN_PUBLIC_URL }}
           DOCKER_BASE_CHANGED: ${{ inputs.docker-base-changed }}
+          # Tells test.sh to layer testing/compose/docker-compose-coverage.override.yml
+          # over the cucumber compose so the container starts with the
+          # JaCoCo agent attached via JAVA_CUSTOM_OPTS.
+          STIRLING_PDF_TEST_COVERAGE: "1"
+
+      - name: Generate cucumber JaCoCo report
+        # `if: always()` so a behave failure still produces partial
+        # coverage from whatever endpoints did run. The exec file only
+        # exists when the container shut down cleanly - guard so the step
+        # is silent on the (rare) crash path.
+        if: always()
+        id: cucumber-coverage
+        run: |
+          if [ -s testing/cucumber-coverage/cucumber.exec ]; then
+            ./gradlew jacocoReportFromExec \
+              -PexecFile=testing/cucumber-coverage/cucumber.exec \
+              -PreportDir=build/reports/jacoco/cucumber \
+              -PnoSpotless
+            echo "report=true" >> "$GITHUB_OUTPUT"
+          else
+            echo "::warning::No cucumber .exec at testing/cucumber-coverage/cucumber.exec (container may have crashed before flushing)"
+            echo "report=false" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Install defusedxml for coverage summary
+        # coverage-summary.py parses JaCoCo XML through defusedxml -
+        # see the script header for context.
+        if: always() && steps.cucumber-coverage.outputs.report == 'true'
+        run: python -m pip install --quiet defusedxml
+
+      - name: Cucumber coverage step summary
+        if: always() && steps.cucumber-coverage.outputs.report == 'true'
+        run: |
+          python scripts/coverage-summary.py \
+            --title "Cucumber (docker) JaCoCo coverage" \
+            --jacoco "cucumber=build/reports/jacoco/cucumber/jacocoTestReport.xml" \
+            --github-step-summary
+
+      - name: Upload cucumber JaCoCo report
+        if: always() && steps.cucumber-coverage.outputs.report == 'true'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: jacoco-cucumber-${{ github.run_id }}
+          path: build/reports/jacoco/cucumber/
+          retention-days: 7
+
+      - name: Upload raw cucumber .exec for aggregate merge
+        # Picked up by the coverage-aggregate workflow via the
+        # `jacoco-exec-*` artifact name pattern.
+        if: always() && steps.cucumber-coverage.outputs.report == 'true'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: jacoco-exec-cucumber
+          path: testing/cucumber-coverage/cucumber.exec
+          retention-days: 7
+          if-no-files-found: warn
 
       - name: Upload Cucumber Report
         if: always()

.github/workflows/e2e-live.yml

@@ -42,16 +42,139 @@ jobs:
           cache: "npm"
           cache-dependency-path: frontend/package-lock.json
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Install Playwright (chromium only)
         run: task e2e:install -- chromium
       - name: Build frontend (production bundle for vite preview)
         env:
           VITE_BUILD_FOR_PREVIEW: "1"
         run: task frontend:build
-      - name: Run live E2E tests (chromium)
+      - name: Run live E2E tests (chromium) with coverage
         id: live-tests
+        env:
+          # Attaches the JaCoCo agent to the bootRun JVM (see
+          # .taskfiles/e2e.yml live:backend). The .exec gets flushed on
+          # graceful shutdown when the runner traps EXIT/INT/TERM, so the
+          # report step below sees a populated file.
+          COVERAGE: "1"
+          # Tells the Playwright fixture (test-base.ts) to capture per-test
+          # V8 JS coverage. Raw dumps land under
+          # .test-state/playwright/coverage-pw/ for the post-process step
+          # to aggregate. Chromium-only - other engines silently skip.
+          PW_COVERAGE: "1"
         run: task e2e:live
+      - name: Generate JaCoCo report from e2e:live .exec
+        if: always()
+        id: live-coverage
+        # `if: always()` so even a failed test run still produces a
+        # report from whatever flows did exercise the backend before
+        # the failure. The task itself tolerates a missing .exec
+        # (jacoco emits an empty report rather than crashing) but we
+        # guard with `test -s` to keep the job log clean.
+        run: |
+          if [ -s .test-state/playwright/jacoco.exec ]; then
+            ./gradlew jacocoReportFromExec \
+              -PexecFile=.test-state/playwright/jacoco.exec \
+              -PreportDir=build/reports/jacoco/e2e-live \
+              -PnoSpotless
+            echo "report=true" >> "$GITHUB_OUTPUT"
+          else
+            echo "::warning::No e2e:live .exec found at .test-state/playwright/jacoco.exec; skipping report"
+            echo "report=false" >> "$GITHUB_OUTPUT"
+          fi
+      - name: Set up Python for coverage summary
+        if: always() && steps.live-coverage.outputs.report == 'true'
+        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
+        with:
+          python-version: "3.12"
+      - name: Install defusedxml for coverage summary
+        # coverage-summary.py uses defusedxml instead of stdlib xml.etree
+        # to dodge XXE / billion-laughs scanner findings.
+        if: always() && steps.live-coverage.outputs.report == 'true'
+        run: python -m pip install --quiet defusedxml
+      - name: e2e:live coverage step summary
+        if: always() && steps.live-coverage.outputs.report == 'true'
+        run: |
+          python scripts/coverage-summary.py \
+            --title "Playwright (live backend) JaCoCo coverage" \
+            --jacoco "e2e-live=build/reports/jacoco/e2e-live/jacocoTestReport.xml" \
+            --github-step-summary
+      - name: Upload e2e:live JaCoCo report
+        if: always() && steps.live-coverage.outputs.report == 'true'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: jacoco-e2e-live-${{ github.run_id }}
+          path: build/reports/jacoco/e2e-live/
+          retention-days: 7
+
+      - name: Upload raw e2e:live .exec for aggregate merge
+        # Picked up by the coverage-aggregate workflow via the
+        # `jacoco-exec-*` artifact name pattern.
+        if: always() && steps.live-coverage.outputs.report == 'true'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: jacoco-exec-e2e-live
+          path: .test-state/playwright/jacoco.exec
+          retention-days: 7
+          if-no-files-found: warn
+
+      - name: Set up Python for frontend coverage summary
+        # Separate from the backend-coverage python step because the
+        # frontend path doesn't depend on a JaCoCo report - it produces
+        # a summary even on backend failure, as long as some Playwright
+        # tests ran far enough to dump V8 coverage.
+        if: always()
+        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
+        with:
+          python-version: "3.12"
+
+      - name: Install defusedxml for frontend coverage summary
+        # Idempotent re-install: the backend-coverage step may have
+        # installed it already, but this leg can run on its own when the
+        # backend report step skips (e.g. .exec missing).
+        if: always()
+        run: python -m pip install --quiet defusedxml
+
+      - name: Aggregate Playwright frontend (V8) coverage
+        # Rolls per-test V8 dumps from the test-base fixture into one
+        # vitest-shaped coverage-summary.json. Tolerates a missing dump
+        # dir (firefox/webkit runs, or a failure before any test got
+        # far enough to dump).
+        if: always()
+        id: pw-frontend-coverage
+        run: |
+          if [ -d .test-state/playwright/coverage-pw ] && \
+             find .test-state/playwright/coverage-pw -name '*.json' -type f | grep -q .; then
+            python scripts/playwright-coverage-summary.py \
+              .test-state/playwright/coverage-pw \
+              --out .test-state/playwright/coverage-pw-summary/coverage-summary.json
+            echo "summary=true" >> "$GITHUB_OUTPUT"
+          else
+            echo "::notice::No Playwright frontend coverage dumps found (chromium-only feature)"
+            echo "summary=false" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Playwright frontend coverage step summary
+        if: always() && steps.pw-frontend-coverage.outputs.summary == 'true'
+        run: |
+          python scripts/coverage-summary.py \
+            --title "Playwright (live) frontend coverage" \
+            --vitest .test-state/playwright/coverage-pw-summary/coverage-summary.json \
+            --github-step-summary
+
+      - name: Upload Playwright frontend coverage
+        # Bundle both the aggregated summary and the raw V8 dumps so
+        # someone debugging "why is this function showing as covered"
+        # can trace it back to the source dump.
+        if: always() && steps.pw-frontend-coverage.outputs.summary == 'true'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: playwright-frontend-coverage-${{ github.run_id }}
+          path: |
+            .test-state/playwright/coverage-pw-summary/
+            .test-state/playwright/coverage-pw/
+          retention-days: 7
+
       - name: Print backend log on failure
         if: failure() && steps.live-tests.conclusion == 'failure'
         run: |
@@ -65,10 +188,30 @@ jobs:
           name: backend-log-live-${{ github.run_id }}
           path: .test-state/playwright/backend.log
           retention-days: 7
-      - name: Upload Playwright report
+      - name: List Playwright output locations (debug)
+        if: always()
+        run: |
+          echo "::group::Playwright output dirs"
+          # Playwright anchors its default outputDir + HTML report to the
+          # nearest package.json, which is frontend/ (frontend/editor has
+          # none), so artifacts land under frontend/, not frontend/editor/.
+          ls -la frontend/playwright-report 2>/dev/null \
+            || echo "no playwright-report at frontend/"
+          ls -la frontend/test-results 2>/dev/null \
+            || echo "no test-results at frontend/"
+          find . -name node_modules -prune -o -name 'trace.zip' -print 2>/dev/null || true
+          echo "::endgroup::"
+      - name: Upload Playwright report + traces
         if: always()
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:
           name: playwright-report-live-${{ github.run_id }}
-          path: frontend/editor/playwright-report/
+          # test-results/ holds the per-test trace.zip (with browser console
+          # logs) + screenshots/video; playwright-report/ is the HTML report.
+          # Both live under frontend/ (Playwright anchors them to the nearest
+          # package.json, which is frontend/; frontend/editor has none).
+          path: |
+            frontend/playwright-report/
+            frontend/test-results/
           retention-days: 7
+          if-no-files-found: warn

.github/workflows/e2e-stubbed.yml

@@ -36,7 +36,7 @@ jobs:
           cache: "npm"
           cache-dependency-path: frontend/package-lock.json
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Install Playwright (chromium only)
         run: task e2e:install -- chromium
       - name: Build frontend (production bundle for vite preview)

.github/workflows/frontend-backend-licenses-update.yml

@@ -97,7 +97,7 @@ jobs:
         run: npm ci --ignore-scripts --audit=false --fund=false
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Generate frontend license report (internal PR)
         if: github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == false
         env:
@@ -110,8 +110,8 @@ jobs:
           NPM_CONFIG_IGNORE_SCRIPTS: "true"
         working-directory: frontend
         run: |
-          mkdir -p src/assets
-          npx --yes license-report --only=prod --output=json > src/assets/3rdPartyLicenses.json
+          mkdir -p editor/src/assets
+          npx --yes license-report --only=prod --output=json > editor/src/assets/3rdPartyLicenses.json
 
       - name: Postprocess with project script (BASE version)
         if: github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == true
@@ -349,10 +349,10 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Check licenses and generate report
         id: license-check
         run: task backend:licenses:generate || echo "LICENSE_CHECK_FAILED=true" >> $GITHUB_ENV

.github/workflows/frontend-validation.yml

@@ -31,7 +31,7 @@ jobs:
           cache: "npm"
           cache-dependency-path: frontend/package-lock.json
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Quality-check frontend
         id: frontend-check
         run: task frontend:check:all
@@ -109,6 +109,41 @@ jobs:
                 comment_id: existing.id,
               });
             }
+      - name: Vitest coverage
+        # Separate from `frontend:check:all` so the quality-gate run stays
+        # uninstrumented (faster signal) and coverage stays an informational
+        # follow-up. Continue-on-error keeps the workflow green even when
+        # a handful of test files refuse to import (e.g. missing icon
+        # specifiers) - the summary still gets posted with whatever
+        # vitest managed to instrument.
+        id: frontend-coverage
+        continue-on-error: true
+        run: task frontend:test:coverage
+      - name: Set up Python for coverage summary
+        if: always()
+        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
+        with:
+          python-version: "3.12"
+      - name: Install defusedxml for coverage summary
+        # See coverage-summary.py header - it parses XML through defusedxml
+        # to dodge the stdlib parser's exposure to XXE / billion-laughs.
+        if: always()
+        run: python -m pip install --quiet defusedxml
+      - name: Vitest coverage step summary
+        if: always()
+        run: |
+          python scripts/coverage-summary.py \
+            --title "Frontend Vitest coverage" \
+            --vitest frontend/editor/coverage/coverage-summary.json \
+            --github-step-summary
+      - name: Upload vitest coverage report
+        if: always()
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
+        with:
+          name: frontend-coverage
+          path: frontend/editor/coverage/
+          retention-days: 7
+          if-no-files-found: warn
       - name: Upload frontend build artifacts
         uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
         with:

.github/workflows/multiOSReleases.yml

@@ -73,10 +73,10 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Get version number
         id: versionNumber
         run: |
@@ -148,7 +148,7 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Setup Node.js
         if: matrix.variant.build_frontend == true
@@ -159,7 +159,7 @@ jobs:
           cache-dependency-path: frontend/package-lock.json
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
 
       - name: Build JAR
         run: ./gradlew build ${{ matrix.variant.build_frontend && '-PbuildWithFrontend=true' || '' }} -x spotlessApply -x spotlessCheck -x test -x sonarqube
@@ -252,10 +252,10 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
 
       # Build the universal JRE before desktop:prepare so the jlink:runtime
       # task short-circuits on its `test -d runtime/jre` status check.
@@ -442,10 +442,6 @@ jobs:
           echo "Generated tauri.windows.conf.json (alias masked):"
           sed "s/${KEYPAIR_ALIAS}/***/g" ./frontend/editor/src-tauri/tauri.windows.conf.json
 
-      - name: Sign JPDFium dylibs inside bootJar (macOS only)
-        if: matrix.platform == 'macos-15' && env.APPLE_CERTIFICATE != ''
-        run: bash frontend/scripts/sign-jpdfium-dylibs-in-bootjar.sh
-
       - name: Import release GPG signing key (Linux)
         if: matrix.platform == 'ubuntu-22.04' && env.RELEASE_GPG_PRIVATE_KEY != '' && (github.event_name == 'release' || (github.event_name == 'workflow_dispatch' && github.event.inputs.sign != 'false') || github.ref == 'refs/heads/V2-master')
         run: |
@@ -495,6 +491,7 @@ jobs:
           projectPath: ./frontend/editor
           tauriScript: npx tauri
           args: ${{ matrix.args }}
+          updaterJsonKeepUniversal: true
 
       - name: Clear release GPG key from runner keyring (Linux)
         if: always() && matrix.platform == 'ubuntu-22.04' && env.RELEASE_GPG_PRIVATE_KEY != '' && (github.event_name == 'release' || (github.event_name == 'workflow_dispatch' && github.event.inputs.sign != 'false') || github.ref == 'refs/heads/V2-master')
@@ -591,18 +588,32 @@ jobs:
           mkdir -p "$DIST"
           cd ./frontend/editor/src-tauri/target
 
-          # Find and rename artifacts based on platform
+          echo "=== tauri bundle artifacts ==="
+          find . -path "*/bundle/*" \( -name "*.msi" -o -name "*.deb" \
+            -o -name "*.rpm" -o -name "*.AppImage" -o -name "*.dmg" \
+            -o -name "*.app.tar.gz" -o -name "*.sig" \) 2>/dev/null | sort || true
+          echo "=============================="
+
+          # createUpdaterArtifacts:true signs the native installers in place;
+          # each <bundle> ships with a sibling <bundle>.sig consumed by latest.json.
           if [ "${{ matrix.platform }}" = "windows-latest" ]; then
-            # Only ship the MSI installer on Windows. The loose exe and WiX toolset exes
-            # are not the user-facing installer - the MSI contains the signed inner exe.
             find . -name "*.msi" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.msi" \;
+            find . -name "*.msi.sig" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.msi.sig" \;
           elif [ "${{ matrix.platform }}" = "macos-15" ]; then
+            # DMG = manual install; .app.tar.gz (+ .sig) = updater payload.
+            # Raw .app is intentionally not shipped (hundreds of MB of uncompressed input).
             find . -name "*.dmg" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.dmg" \;
-            find . -name "*.app" -exec cp -r {} "$DIST/Stirling-PDF-${{ matrix.name }}.app" \;
+            find . -name "*.app.tar.gz" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.app.tar.gz" \;
+            find . -name "*.app.tar.gz.sig" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.app.tar.gz.sig" \;
           else
+            # The raw .AppImage IS its updater payload (signed -> .AppImage.sig),
+            # not a .tar.gz wrapper - that's only produced under v1Compatible.
             find . -name "*.deb" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.deb" \;
+            find . -name "*.deb.sig" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.deb.sig" \;
             find . -name "*.rpm" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.rpm" \;
+            find . -name "*.rpm.sig" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.rpm.sig" \;
             find . -name "*.AppImage" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.AppImage" \;
+            find . -name "*.AppImage.sig" -exec cp {} "$DIST/Stirling-PDF-${{ matrix.name }}.AppImage.sig" \;
           fi
 
       - name: Upload build artifacts
@@ -613,8 +624,7 @@ jobs:
           path: ./dist/*
           retention-days: 1
 
-  create-release:
-    if: (github.event_name == 'workflow_dispatch' && github.event.inputs.test_mode != 'true') || github.event_name == 'release' || github.ref == 'refs/heads/V2-master'
+  collect-and-release:
     needs: [pick, determine-matrix, build, build-jars]
     runs-on: ${{ needs.pick.outputs.is_fork == 'true' && 'ubuntu-latest' || 'depot-ubuntu-24.04-4' }}
     permissions:
@@ -625,6 +635,16 @@ jobs:
         with:
           egress-policy: audit
 
+      # Sparse-check out the verifier + pubkey before the artifact downloads
+      # so the checkout cannot clobber ./artifacts.
+      - name: Checkout updater verifier
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        with:
+          sparse-checkout: |
+            .github/scripts/verify-updater-signatures.py
+            frontend/editor/src-tauri/tauri.conf.json
+          sparse-checkout-cone-mode: false
+
       - name: Download all Tauri artifacts
         uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
         with:
@@ -652,17 +672,146 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R ./artifacts
 
+      # tauri-action only emits latest.json when it also publishes the release
+      # (tagName/releaseId set). We publish separately via action-gh-release,
+      # so build latest.json here from the per-platform .sig files.
+      - name: Generate updater latest.json
+        env:
+          VERSION: ${{ needs.determine-matrix.outputs.version }}
+          TAG: v${{ needs.determine-matrix.outputs.version }}
+          REPO: ${{ github.repository }}
+        run: |
+          python3 - << 'PYEOF'
+          import json, os, sys
+          from pathlib import Path
+          from datetime import datetime, timezone
+
+          VERSION = os.environ['VERSION']
+          TAG = os.environ['TAG']
+          REPO = os.environ['REPO']
+
+          ART = Path('./artifacts/tauri')
+
+          # Tauri updater looks up {os}-{arch}-{installer} (e.g. linux-x86_64-deb)
+          # before bare {os}-{arch}, so per-format Linux keys let deb/rpm/appimage
+          # each self-update from their matching file. macOS universal serves both
+          # arches from the one .app.tar.gz.
+          PLATFORM_MAP = [
+              {
+                  'bundles': ['Stirling-PDF-linux-x86_64.deb'],
+                  'targets': ['linux-x86_64-deb'],
+              },
+              {
+                  'bundles': ['Stirling-PDF-linux-x86_64.rpm'],
+                  'targets': ['linux-x86_64-rpm'],
+              },
+              {
+                  'bundles': ['Stirling-PDF-linux-x86_64.AppImage'],
+                  'targets': ['linux-x86_64-appimage'],
+              },
+              {
+                  'bundles': ['Stirling-PDF-windows-x86_64.msi'],
+                  'targets': ['windows-x86_64-msi', 'windows-x86_64'],
+              },
+              {
+                  'bundles': ['Stirling-PDF-macos-universal.app.tar.gz'],
+                  'targets': ['darwin-x86_64', 'darwin-aarch64'],
+              },
+          ]
+
+          # rglob() because download-artifact varies layout: one artifact -> flat,
+          # many -> nested under <artifact-name>/.
+          def find_signed(name):
+              for bundle_path in sorted(ART.rglob(name)):
+                  sig_path = bundle_path.with_name(bundle_path.name + '.sig')
+                  if sig_path.exists():
+                      return bundle_path, sig_path
+              return None
+
+          platforms = {}
+          skipped = []
+          for entry in PLATFORM_MAP:
+              picked = None
+              for name in entry['bundles']:
+                  picked = find_signed(name)
+                  if picked:
+                      break
+              if not picked:
+                  skipped.append(
+                      f"{entry['targets']} (no signed bundle among "
+                      f"{entry['bundles']} - TAURI_SIGNING_PRIVATE_KEY unset "
+                      f"or createUpdaterArtifacts disabled?)"
+                  )
+                  continue
+              bundle_path, sig_path = picked
+              signature = sig_path.read_text(encoding='utf-8').strip()
+              url = f"https://github.com/{REPO}/releases/download/{TAG}/{bundle_path.name}"
+              for target in entry['targets']:
+                  platforms[target] = {'signature': signature, 'url': url}
+              print(f"Added {entry['targets']} from {bundle_path.name}")
+
+          if skipped:
+              print("Skipped platforms:")
+              for s in skipped:
+                  print(f"  - {s}")
+
+          if not platforms:
+              print(
+                  "WARN: no signed updater bundles found - "
+                  "skipping latest.json generation"
+              )
+              sys.exit(0)
+
+          manifest = {
+              'version': VERSION,
+              'notes': f"See https://github.com/{REPO}/releases/tag/{TAG}",
+              'pub_date': datetime.now(timezone.utc).strftime('%Y-%m-%dT%H:%M:%SZ'),
+              'platforms': platforms,
+          }
+
+          out = Path('./artifacts/latest.json')
+          out.write_text(json.dumps(manifest, indent=2) + '\n', encoding='utf-8')
+          print(f"Generated {out} with platforms: {sorted(platforms.keys())}")
+          PYEOF
+
+      - name: Upload merged artifacts for review
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        with:
+          name: release-artifacts
+          path: ./artifacts/
+          retention-days: 7
+
+      # Gate publish on valid updater sigs. Runs after the review upload (so
+      # artifacts survive for debugging) and before action-gh-release.
+      - name: Verify updater signatures
+        run: |
+          python3 -m pip install --quiet 'cryptography==44.0.0'
+          python3 .github/scripts/verify-updater-signatures.py \
+            ./artifacts/tauri frontend/editor/src-tauri/tauri.conf.json
+
+      # workflow_dispatch path requires platform=='all' so a single-platform
+      # dispatch can't overwrite an existing release's full latest.json with a
+      # partial one (action-gh-release defaults overwrite_files:true).
+      # release / V2-master always build the full matrix so no extra guard needed.
+      # fail_on_unmatched_files makes a missing latest.json or installer fail loudly
+      # instead of silently shipping a broken auto-update.
       - name: Upload binaries to Release
+        if: (github.event_name == 'workflow_dispatch' && github.event.inputs.test_mode != 'true' && github.event.inputs.platform == 'all') || github.event_name == 'release' || github.ref == 'refs/heads/V2-master'
         uses: softprops/action-gh-release@b4309332981a82ec1c5618f44dd2e27cc8bfbfda # v3.0.0
         with:
           tag_name: v${{ needs.determine-matrix.outputs.version }}
           generate_release_notes: true
+          fail_on_unmatched_files: true
+          # Installers + updater payloads + manifest. .sig contents are embedded
+          # in latest.json so the .sig files themselves are not uploaded.
           files: |
             ./artifacts/**/*.jar
             ./artifacts/**/*.msi
             ./artifacts/**/*.dmg
+            ./artifacts/**/*.app.tar.gz
             ./artifacts/**/*.deb
             ./artifacts/**/*.rpm
             ./artifacts/**/*.AppImage
+            ./artifacts/latest.json
           draft: false
           prerelease: false

.github/workflows/nightly.yml

@@ -37,7 +37,7 @@ jobs:
           cache-dependency-path: frontend/package-lock.json
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Install all Playwright browsers
         run: task e2e:install
 

.github/workflows/push-docker-base.yml

@@ -75,7 +75,7 @@ jobs:
 
       - name: Generate tags for base image
         id: meta
-        uses: docker/metadata-action@030e881283bb7a6894de51c315a6bfe6a94e05cf # v6.0.0
+        uses: docker/metadata-action@80c7e94dd9b9319bd5eb7a0e0fe9291e23a2a2e9 # v6.1.0
         with:
           images: |
             ${{ secrets.DOCKER_HUB_ORG_USERNAME }}/stirling-pdf-base

.github/workflows/push-docker.yml

@@ -78,14 +78,14 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Set up Docker Buildx
         id: buildx
         uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v4.0.0
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Get version number
         id: versionNumber
         run: echo "versionNumber=$(./gradlew printVersion --quiet | tail -1)" >> $GITHUB_OUTPUT
@@ -129,7 +129,7 @@ jobs:
       - name: Generate tags for latest
         id: meta
         if: env.RUN_MAIN_APP == 'true'
-        uses: docker/metadata-action@030e881283bb7a6894de51c315a6bfe6a94e05cf # v6.0.0
+        uses: docker/metadata-action@80c7e94dd9b9319bd5eb7a0e0fe9291e23a2a2e9 # v6.1.0
         with:
           images: |
             ${{ secrets.DOCKER_HUB_USERNAME }}/s-pdf
@@ -178,7 +178,7 @@ jobs:
 
       - name: Generate tags for latest-fat
         id: meta-fat
-        uses: docker/metadata-action@030e881283bb7a6894de51c315a6bfe6a94e05cf # v6.0.0
+        uses: docker/metadata-action@80c7e94dd9b9319bd5eb7a0e0fe9291e23a2a2e9 # v6.1.0
         if: env.RUN_MAIN_APP == 'true' && github.ref != 'refs/heads/main' && github.ref != 'refs/heads/testMain'
         with:
           images: |
@@ -222,7 +222,7 @@ jobs:
 
       - name: Generate tags for ultra-lite
         id: meta-lite
-        uses: docker/metadata-action@030e881283bb7a6894de51c315a6bfe6a94e05cf # v6.0.0
+        uses: docker/metadata-action@80c7e94dd9b9319bd5eb7a0e0fe9291e23a2a2e9 # v6.1.0
         if: env.RUN_MAIN_APP == 'true' && github.ref != 'refs/heads/main' && github.ref != 'refs/heads/testMain'
         with:
           images: |

.github/workflows/stale.yml

@@ -22,7 +22,7 @@ jobs:
           egress-policy: audit
 
       - name: 30 days stale issues
-        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
+        uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
         with:
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           days-before-stale: 30

.github/workflows/swagger.yml

@@ -48,7 +48,7 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Generate Swagger documentation
         run: ./gradlew :stirling-pdf:generateOpenApiDocs
@@ -63,7 +63,7 @@ jobs:
           SWAGGERHUB_USER: "Frooodle"
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Get version number
         id: versionNumber
         run: echo "versionNumber=$(./gradlew printVersion --quiet | tail -1)" >> $GITHUB_OUTPUT

.github/workflows/sync_files_v2.yml

@@ -62,7 +62,7 @@ jobs:
 
       - name: Sync translation TOML files
         run: |
-          python .github/scripts/check_language_toml.py --reference-file "frontend/editor/public/locales/en-GB/translation.toml" --branch main
+          python .github/scripts/check_language_toml.py --reference-file "frontend/editor/public/locales/en-US/translation.toml" --branch main
 
       - name: pre-commit run
         run: |
@@ -100,7 +100,7 @@ jobs:
             This Pull Request was automatically generated to synchronize updates to translation files and documentation. Below are the details of the changes made:
 
             #### **1. Synchronization of Translation Files**
-            - Updated translation files (`frontend/editor/public/locales/*/translation.toml`) to reflect changes in the reference file `en-GB/translation.toml`.
+            - Updated translation files (`frontend/editor/public/locales/*/translation.toml`) to reflect changes in the reference file `en-US/translation.toml`.
             - Ensured consistency and synchronization across all supported language files.
             - Highlighted any missing or incomplete translations.
             - **Format**: TOML

.github/workflows/tauri-build.yml

@@ -136,10 +136,10 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Setup Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
 
       - name: Build universal macOS JRE
         if: matrix.platform == 'macos-15'
@@ -271,10 +271,6 @@ jobs:
           echo "APPLE_SIGNING_IDENTITY=$CERT_ID" >> $GITHUB_ENV
           echo "Certificate imported successfully."
 
-      - name: Sign JPDFium dylibs inside bootJar (macOS only)
-        if: matrix.platform == 'macos-15' && env.APPLE_CERTIFICATE != ''
-        run: bash frontend/scripts/sign-jpdfium-dylibs-in-bootjar.sh
-
       - name: Check DMG creation dependencies (macOS only)
         if: matrix.platform == 'macos-15'
         run: |

.github/workflows/test-build-docker.yml

@@ -106,11 +106,11 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
           cache-disabled: true
 
       - name: Install Task
-        uses: go-task/setup-task@3be4020d41929789a01026e0e427a4321ce0ad44 # v2.0.0
+        uses: go-task/setup-task@01a4adf9db2d14c1de7a560f09170b6e0df736aa # v2.1.0
       - name: Build application
         run: task backend:build
         env:
@@ -157,7 +157,7 @@ jobs:
 
       - name: Build ${{ matrix.docker-rev }} (Depot)
         if: env.USE_DEPOT == 'true'
-        uses: depot/build-push-action@5f3b3c2e5a00f0093de47f657aeaefcedff27d18 # v1.16.0
+        uses: depot/build-push-action@98e78adca7817480b8185f474a400b451d74e287 # v1.16.0
         with:
           project: ${{ vars.DEPOT_PROJECT_ID }}
           context: .
@@ -230,7 +230,7 @@ jobs:
 
       - name: Build docker/unoserver/Dockerfile (Depot)
         if: env.USE_DEPOT == 'true'
-        uses: depot/build-push-action@5f3b3c2e5a00f0093de47f657aeaefcedff27d18 # v1.16.0
+        uses: depot/build-push-action@98e78adca7817480b8185f474a400b451d74e287 # v1.16.0
         with:
           project: ${{ vars.DEPOT_PROJECT_ID }}
           context: .

.github/workflows/testdriver.yml

@@ -51,7 +51,7 @@ jobs:
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@50e97c2cd7a37755bbfafc9c5b7cafaece252f6e # v6.1.0
         with:
-          gradle-version: 9.3.1
+          gradle-version: 9.5.1
 
       - name: Build with Gradle
         run: ./gradlew build
@@ -83,7 +83,7 @@ jobs:
 
       - name: Build and push test image (Depot)
         if: env.USE_DEPOT == 'true'
-        uses: depot/build-push-action@5f3b3c2e5a00f0093de47f657aeaefcedff27d18 # v1.16.0
+        uses: depot/build-push-action@98e78adca7817480b8185f474a400b451d74e287 # v1.16.0
         with:
           project: ${{ vars.DEPOT_PROJECT_ID }}
           context: .
@@ -129,7 +129,7 @@ jobs:
               environment:
                 DISABLE_ADDITIONAL_FEATURES: "true"
                 SECURITY_ENABLELOGIN: "false"
-                SYSTEM_DEFAULTLOCALE: en-GB
+                SYSTEM_DEFAULTLOCALE: en-US
                 UI_APPNAME: "Stirling-PDF Test"
                 UI_HOMEDESCRIPTION: "Test Deployment"
                 UI_APPNAMENAVBAR: "Test"

.gitignore

@@ -57,6 +57,8 @@ app/core/src/main/resources/static/robots.txt
 app/core/src/main/resources/static/pdfium/
 app/core/src/main/resources/static/pdfjs/
 app/core/src/main/resources/static/vendor/
+app/core/src/main/resources/static/**/*.gz
+app/core/src/main/resources/static/**/*.br
 # Note: Keep backend-managed files like fonts/, css/, js/, pdfjs/, etc.
 
 # Gradle
@@ -212,7 +214,7 @@ out/
 *.asc
 
 # Allow test fixture certificates (synthetic, no real credentials)
-!frontend/src/core/tests/test-fixtures/certs/**
+!frontend/editor/src/core/tests/test-fixtures/certs/**
 
 # SSH Keys
 *.pub
@@ -254,7 +256,7 @@ node_modules/
 *compact*.json
 test_batch.json
 *.backup.*.json
-frontend/public/locales/*/translation.backup*.json
+frontend/editor/public/locales/*/translation.backup*.json
 
 # Development/build artifacts
 .gradle-cache/
@@ -279,4 +281,4 @@ docs/type3/signatures/
 *.playwright-mcp.png
 
 # Local screenshot artifacts from *-screenshots.spec.ts
-frontend/screenshots/
+frontend/editor/screenshots/

.gitleaksignore

@@ -0,0 +1,14 @@
+# PostHog project-level key — phc_ prefix keys are public/client-side by design
+# (PostHog client-side tracking embeds them in the browser bundle). Committed
+# intentionally in #6150 so engine/.env has a working default, with real
+# credentials overridden via engine/.env.local.
+engine/.env:generic-api-key:41
+
+# MCP test fixtures / harness - no real secrets:
+# - test-only API key constant in an integration test
+# - JDBC URL + throwaway Keycloak creds in the local test compose
+# - placeholder / shell-variable Bearer headers in curl-based validation scripts
+app/proprietary/src/test/java/stirling/software/proprietary/mcp/security/McpApiKeyIntegrationTest.java:generic-api-key:40
+testing/compose/docker-compose-keycloak-mcp.yml:generic-api-key:25
+testing/compose/validate-mcp-apikey.sh:curl-auth-header:73
+testing/compose/validate-mcp-test.sh:curl-auth-header:92

.taskfiles/backend.yml

@@ -18,16 +18,26 @@ version: '3'
 tasks:
   dev:
     desc: "Start backend dev server"
+    cmds:
+      - task: dev:proprietary
+        vars:
+          PORT: '{{.PORT}}'
+          AIENGINE_URL: '{{.AIENGINE_URL}}'
+          AIENGINE_TIMEOUTSECONDS: '{{.AIENGINE_TIMEOUTSECONDS}}'
+
+  dev:proprietary:
+    desc: "Start backend dev server in proprietary mode"
     ignore_error: true
     vars:
       PORT: '{{.PORT | default "8080"}}'
       AIENGINE_URL: '{{.AIENGINE_URL | default ""}}'
+      AIENGINE_TIMEOUTSECONDS: '{{.AIENGINE_TIMEOUTSECONDS | default "120"}}'
     env:
       SERVER_PORT: '{{.PORT}}'
     cmds:
-      - cmd: '{{if .AIENGINE_URL}}AIENGINE_URL={{.AIENGINE_URL}} AIENGINE_ENABLED=true {{end}}cmd /c ".\gradlew.bat :stirling-pdf:bootRun"'
+      - cmd: '{{if .AIENGINE_URL}}AIENGINE_URL={{.AIENGINE_URL}} AIENGINE_ENABLED=true AIENGINE_TIMEOUTSECONDS={{.AIENGINE_TIMEOUTSECONDS}} {{end}}cmd /c ".\gradlew.bat :stirling-pdf:bootRun"'
         platforms: [windows]
-      - cmd: '{{if .AIENGINE_URL}}AIENGINE_URL={{.AIENGINE_URL}} AIENGINE_ENABLED=true {{end}}./gradlew :stirling-pdf:bootRun'
+      - cmd: '{{if .AIENGINE_URL}}AIENGINE_URL={{.AIENGINE_URL}} AIENGINE_ENABLED=true AIENGINE_TIMEOUTSECONDS={{.AIENGINE_TIMEOUTSECONDS}} {{end}}./gradlew :stirling-pdf:bootRun'
         platforms: [linux, darwin]
 
   dev:bundled:
@@ -49,9 +59,14 @@ tasks:
       PORT: '{{.PORT | default "8080"}}'
       # Override to "" to run the pure `saas` profile against your own SAAS_DB_*.
       PROFILES: '{{.PROFILES | default "dev"}}'
+      AIENGINE_URL: '{{.AIENGINE_URL | default ""}}'
+      AIENGINE_TIMEOUTSECONDS: '{{.AIENGINE_TIMEOUTSECONDS | default "120"}}'
     env:
       SERVER_PORT: '{{.PORT}}'
       STIRLING_FLAVOR: saas
+      AIENGINE_URL: '{{.AIENGINE_URL}}'
+      AIENGINE_ENABLED: '{{if .AIENGINE_URL}}true{{else}}false{{end}}'
+      AIENGINE_TIMEOUTSECONDS: '{{.AIENGINE_TIMEOUTSECONDS}}'
     cmds:
       - cmd: cmd /c ".\gradlew.bat :stirling-pdf:bootRun {{if .PROFILES}}--args=\"--spring.profiles.include={{.PROFILES}}\"{{end}}"
         platforms: [windows]

.taskfiles/desktop.yml

@@ -1,7 +1,9 @@
 version: '3'
 
 vars:
-  JLINK_MODULES: "java.base,java.compiler,java.desktop,java.instrument,java.logging,java.management,java.naming,java.net.http,java.prefs,java.rmi,java.scripting,java.security.jgss,java.security.sasl,java.sql,java.transaction.xa,java.xml,java.xml.crypto,jdk.crypto.ec,jdk.crypto.cryptoki,jdk.unsupported"
+  # jdk.dynalink is required by VeraPDF (PDF/A validation); without it the bundled JRE throws
+  # NoClassDefFoundError: jdk/dynalink/Namespace at runtime in get-info-on-pdf and verify-pdf
+  JLINK_MODULES: "java.base,java.compiler,java.desktop,java.instrument,java.logging,java.management,java.naming,java.net.http,java.prefs,java.rmi,java.scripting,java.security.jgss,java.security.sasl,java.sql,java.transaction.xa,java.xml,java.xml.crypto,jdk.crypto.ec,jdk.crypto.cryptoki,jdk.unsupported,jdk.dynalink"
 
   # Override via JPDFIUM_PLATFORMS env (csv of platform keys, or 'all').
   JPDFIUM_PLATFORMS:
@@ -62,21 +64,21 @@ tasks:
     deps: [prepare]
     dir: editor
     cmds:
-      - npx tauri build --bundles app
+      - npx tauri build --bundles app --config '{"bundle":{"createUpdaterArtifacts":false}}'
 
   build:dev:windows:
     desc: "Build Tauri desktop NSIS installer (Windows)"
     deps: [prepare]
     dir: editor
     cmds:
-      - npx tauri build --bundles nsis
+      - npx tauri build --bundles nsis --config '{"bundle":{"createUpdaterArtifacts":false}}'
 
   build:dev:linux:
     desc: "Build Tauri desktop AppImage (Linux)"
     deps: [prepare]
     dir: editor
     cmds:
-      - npx tauri build --bundles appimage
+      - npx tauri build --bundles appimage --config '{"bundle":{"createUpdaterArtifacts":false}}'
 
   test:
     desc: "Run Tauri/Cargo tests"
@@ -125,16 +127,38 @@ tasks:
     cmds:
       - rm -rf runtime/jre
       - mkdir -p runtime
-      - >-
-        jlink
-        --add-modules {{.JLINK_MODULES}}
-        --strip-debug
-        --compress=zip-6
-        --no-header-files
-        --no-man-pages
-        --output runtime/jre
+      - |
+        JLINK_COMPRESS="$(jlink --help 2>&1 | grep -q 'zip-\[0-9\]' && echo zip-6 || echo 2)"
+        jlink \
+          --add-modules {{.JLINK_MODULES}} \
+          --strip-debug \
+          --compress="$JLINK_COMPRESS" \
+          --no-header-files \
+          --no-man-pages \
+          --output runtime/jre
+      # jlink emits its files mode 444 (read-only). Tauri's build-script
+      # resource copier preserves source permissions when staging
+      # `runtime/jre/**/*` into `target/<profile>/runtime/jre/...`, so the
+      # staged copies are read-only too. On any subsequent incremental
+      # build the copier tries to overwrite them and fails with a bare
+      # `Permission denied (os error 13)` (Rust's io::Error Display drops
+      # the path, so the failure is opaque). Make the source writable here
+      # so the staged destinations are writable and can be overwritten.
+      #
+      # Trade-off: this task runs for both `task desktop:dev` and
+      # `task desktop:build`, so production bundles also ship mode-644
+      # JRE files instead of 444. Functionally harmless on POSIX (the
+      # `other` bit is `r--` either way, and on macOS code signing is the
+      # real integrity check) and on Windows the DOS read-only attribute
+      # isn't load-bearing for the bundled JDK. If we ever need strict
+      # 444 in production, split the chmod into a dev-only step and have
+      # `desktop:build` run `jlink:clean` first to force a fresh build.
+      - cmd: chmod -R u+w runtime/jre
+        platforms: [linux, darwin]
+      - cmd: powershell -NoProfile -Command "Get-ChildItem -Recurse runtime/jre | ForEach-Object { $_.IsReadOnly = $false }"
+        platforms: [windows]
     status:
-      - test -d editor/src-tauri/runtime/jre
+      - test -f runtime/jre/release
 
   jlink:clean:
     desc: "Remove JLink runtime and bundled JARs"

.taskfiles/docker.yml

@@ -20,6 +20,11 @@ tasks:
     cmds:
       - docker build -t stirling-pdf-ultra-lite -f {{.EMBEDDED_DIR}}/Dockerfile.ultra-lite .
 
+  build:backend:
+    desc: "Build backend-only Docker image (no embedded frontend)"
+    cmds:
+      - docker build -t stirling-pdf-backend -f docker/backend/Dockerfile .
+
   build:frontend:
     desc: "Build frontend-only Docker image"
     cmds:

.taskfiles/e2e.yml

@@ -34,6 +34,9 @@ tasks:
     ignore_error: true
     vars:
       BASE_DIR: '{{.ROOT_DIR}}/.test-state/playwright'
+    # COVERAGE=1 in the calling environment attaches the JaCoCo agent to
+    # the bootRun JVM and writes to BASE_DIR/jacoco.exec on shutdown.
+    # Off by default to keep local dev runs uninstrumented; CI flips it.
     env:
       STIRLING_BASE_PATH: '{{.BASE_DIR}}'
       # Suppress the analytics opt-in modal that fires on first admin login.
@@ -58,12 +61,19 @@ tasks:
           set -e
           rm -rf "{{.BASE_DIR}}"
           mkdir -p "{{.BASE_DIR}}"
+          GRADLE_ARGS=":stirling-pdf:bootRun"
+          if [ -n "${COVERAGE:-}" ]; then
+            # copyJacocoAgent is wired as a dependency of bootRun when
+            # -PjacocoAgent=true, so we do not need to invoke it separately.
+            GRADLE_ARGS="$GRADLE_ARGS -PjacocoAgent=true -PjacocoExec={{.BASE_DIR}}/jacoco.exec"
+            echo "JaCoCo coverage enabled, writing to {{.BASE_DIR}}/jacoco.exec"
+          fi
           # Background gradle and record its PID so the runner can clean up
           # the exact process tree (wrapper + forked Spring Boot JVM) without
           # resorting to fuzzy `pkill -f` patterns. `wait` keeps this script
           # alive for the lifetime of gradle so Task'"'"'s parallel deps stay
           # synchronised.
-          bash gradlew :stirling-pdf:bootRun > "{{.BASE_DIR}}/backend.log" 2>&1 &
+          bash gradlew $GRADLE_ARGS > "{{.BASE_DIR}}/backend.log" 2>&1 &
           GRADLE_PID=$!
           echo $GRADLE_PID > "{{.BASE_DIR}}/backend.pid"
           wait $GRADLE_PID
@@ -202,3 +212,55 @@ tasks:
     desc: "Stop the SAML keycloak test environment"
     cmds:
       - docker compose -f testing/compose/docker-compose-keycloak-saml.yml down -v
+
+  mcp:up:
+    desc: "Start the MCP keycloak test environment (Stirling as OAuth resource server)"
+    summary: |
+      Brings up Keycloak (OAuth authorization server) + Stirling configured as an
+      MCP resource server, then you can exercise /mcp with real Keycloak tokens.
+      Set LICENSE_KEY=<KEY> to skip the interactive license prompt:
+        task e2e:mcp:up LICENSE_KEY=abc123
+      Pass extra flags via -- :
+        task e2e:mcp:up -- --validate --nobuild
+    ignore_error: true
+    cmds:
+      - bash testing/compose/start-mcp-test.sh {{if .LICENSE_KEY}}--license-key "{{.LICENSE_KEY}}"{{end}} {{.CLI_ARGS}}
+
+  mcp:manual:
+    desc: "Start the MCP keycloak test env in manual mode (prints URLs + a live token for your client)"
+    summary: |
+      Brings the stack up and prints copy-paste URLs/commands plus a freshly minted
+      access token so you can drive your own MCP client (Inspector, curl, ...).
+        task e2e:mcp:manual LICENSE_KEY=<your-license-key>
+      Add --nobuild if the images are already built:
+        task e2e:mcp:manual LICENSE_KEY=<your-license-key> -- --nobuild
+    ignore_error: true
+    cmds:
+      - bash testing/compose/start-mcp-test.sh --manual {{if .LICENSE_KEY}}--license-key "{{.LICENSE_KEY}}"{{end}} {{.CLI_ARGS}}
+
+  mcp:apikey:
+    desc: "Start the MCP test env in API-KEY manual mode (no OAuth/IdP): mints a key + prints client settings"
+    summary: |
+      Brings Stirling up in apikey auth mode and prints copy-paste client settings with a freshly
+      minted X-API-KEY - ideal for clients whose OAuth layer can't reach localhost.
+        task e2e:mcp:apikey LICENSE_KEY=<your-license-key>
+      Add --nobuild if images are already built:
+        task e2e:mcp:apikey LICENSE_KEY=<your-license-key> -- --nobuild
+    ignore_error: true
+    cmds:
+      - bash testing/compose/start-mcp-test.sh --apikey {{if .LICENSE_KEY}}--license-key "{{.LICENSE_KEY}}"{{end}} {{.CLI_ARGS}}
+
+  mcp:validate:
+    desc: "Validate the running MCP keycloak test environment end-to-end (oauth mode + real MCP SDK client)"
+    cmds:
+      - bash testing/compose/validate-mcp-test.sh
+
+  mcp:validate-apikey:
+    desc: "Validate the MCP server in API-KEY auth mode (mints a key + real MCP SDK client), then restore oauth"
+    cmds:
+      - bash testing/compose/validate-mcp-apikey.sh
+
+  mcp:down:
+    desc: "Stop the MCP keycloak test environment"
+    cmds:
+      - docker compose -f testing/compose/docker-compose-keycloak-mcp.yml down -v

.taskfiles/engine.yml

@@ -33,7 +33,7 @@ tasks:
     env:
       PYTHONUNBUFFERED: "1"
     cmds:
-      - uv run uvicorn stirling.api.app:app --host 0.0.0.0 --port {{.PORT}}
+      - uv run uvicorn stirling.api.app:app --host 0.0.0.0 --port {{.PORT}} --workers "${STIRLING_ENGINE_WORKERS:-4}"
 
   dev:
     desc: "Start engine dev server with hot reload"

.taskfiles/frontend.yml

@@ -112,6 +112,12 @@ tasks:
       - task: dev:_run
         vars: { MODE: prototypes, PORT: '{{.PORT}}', BACKEND_URL: '{{.BACKEND_URL}}', OPEN: '{{.OPEN}}' }
 
+  dev:portal:
+    desc: "Start developer portal dev server"
+    deps: [install]
+    cmds:
+      - npx vite portal --port {{.PORT | default "5173"}}{{if .OPEN}} --open{{end}}
+
   # ============================================================
   # Build
   # ============================================================
@@ -156,6 +162,24 @@ tasks:
     cmds:
       - npx vite build editor --mode prototypes
 
+  build:portal:
+    desc: "Build developer portal"
+    deps: [install]
+    cmds:
+      - npx vite build portal
+
+  storybook:
+    desc: "Start Storybook dev server"
+    deps: [install]
+    cmds:
+      - npx storybook dev -p 6006 {{.CLI_ARGS}}
+
+  storybook:build:
+    desc: "Build static Storybook"
+    deps: [install]
+    cmds:
+      - npx storybook build {{.CLI_ARGS}}
+
   # ============================================================
   # Code quality
   # ============================================================
@@ -163,9 +187,23 @@ tasks:
   lint:
     desc: "Run linting"
     deps: [install]
+    cmds:
+      - task: lint:eslint
+      - task: lint:dpdm
+
+  lint:eslint:
+    desc: "Run ESLint linting"
+    deps: [install]
     cmds:
       - npx eslint --max-warnings=0
-      - npx dpdm editor/src --circular --no-warning --no-tree --exit-code circular:1
+
+  lint:dpdm:
+    desc: "Run circular import linting"
+    deps: [install]
+    cmds:
+      # Globs so dpdm walks the whole tree. dpdm expands the braces itself, so this is
+      # shell-agnostic. Covers editor, portal, and the shared design system.
+      - npx dpdm "editor/src/**/*.{ts,tsx}" "portal/src/**/*.{ts,tsx}" "shared/**/*.{ts,tsx}" --circular --no-warning --no-tree --exit-code circular:1
 
   lint:fix:
     desc: "Auto-fix lint issues"
@@ -236,6 +274,18 @@ tasks:
     cmds:
       - npx tsc --noEmit --project editor/src/prototypes/tsconfig.json
 
+  typecheck:portal:
+    desc: "Typecheck developer portal build variant"
+    deps: [install]
+    cmds:
+      - npx tsc --noEmit --project portal/tsconfig.json
+
+  typecheck:shared:
+    desc: "Typecheck the shared design system"
+    deps: [install]
+    cmds:
+      - npx tsc --noEmit --project shared/tsconfig.json
+
   typecheck:all:
     desc: "Typecheck all build variants"
     cmds:
@@ -245,6 +295,8 @@ tasks:
       - task: typecheck:desktop
       - task: typecheck:scripts
       - task: typecheck:prototypes
+      - task: typecheck:portal
+      - task: typecheck:shared
 
   # ============================================================
   # Quality Gate
@@ -265,7 +317,9 @@ tasks:
       - task: lint
       - task: format:check
       - task: build
+      - task: build:portal
       - task: test
+      - task: storybook:build
 
   # ============================================================
   # Test
@@ -273,21 +327,36 @@ tasks:
 
   test:
     desc: "Run tests"
-    deps: [install]
+    deps: [prepare]
     cmds:
       - npx vitest run --root editor
 
   test:watch:
     desc: "Run tests in watch mode"
-    deps: [install]
+    deps: [prepare]
     cmds:
       - npx vitest --watch --root editor
 
   test:coverage:
-    desc: "Run tests with coverage"
-    deps: [install]
+    desc: "Run tests with coverage (one-shot; CI-friendly)."
+    deps: [prepare]
     cmds:
-      - npx vitest --coverage --root editor
+      # `vitest run` makes this CI-safe (the bare `vitest` form enters watch
+      # mode). Explicit reporter list because v8 + json-summary is what the
+      # coverage-summary.py helper consumes; html/text are kept for humans.
+      #
+      # reportsDirectory is pinned to ./coverage relative to vitest's root
+      # (--root editor), so output lands at frontend/editor/coverage/. The
+      # CI upload step reads from that path. An earlier attempt with
+      # `./editor/coverage` double-nested into frontend/editor/editor/coverage;
+      # pinning future-proofs against vitest changing the default.
+      - >
+        npx vitest run --root editor --coverage
+        --coverage.provider=v8
+        --coverage.reporter=text-summary
+        --coverage.reporter=json-summary
+        --coverage.reporter=html
+        --coverage.reportsDirectory=./coverage
 
   # ============================================================
   # Code Generation

ADDING_TOOLS.md

@@ -200,9 +200,9 @@ const [ToolName] = (props: BaseToolProps) => {
 ```
 
 ## 5. Add Translations
-Update translation files. **Important: Only update `en-GB` files** - other languages are handled separately.
+Update translation files. **Important: Only update `en-US` files** - other languages are handled separately.
 
-**File to update:** `frontend/editor/public/locales/en-GB/translation.toml`
+**File to update:** `frontend/editor/public/locales/en-US/translation.toml`
 
 **Required Translation Keys**:
 ```toml
@@ -251,7 +251,7 @@ Update translation files. **Important: Only update `en-GB` files** - other langu
 ```
 
 **Translation Notes:**
-- **Only update `en-GB/translation.toml`** - other locale files are managed separately
+- **Only update `en-US/translation.toml`** - other locale files are managed separately
 - Use descriptive keys that match your component's `t()` calls
 - Include tooltip translations if you created tooltip hooks
 - Add `options.*` keys if your tool has settings with descriptions

AGENTS.md

@@ -426,7 +426,7 @@ The frontend is organized with a clear separation of concerns:
 
 ## Translation Rules
 
-- **CRITICAL**: Always update translations in `en-GB` only, never `en-US`
+- **CRITICAL**: Always update translations in `en-US` only - all other languages (including `en-GB`) are handled separately
 - Translation files are located in `frontend/editor/public/locales/`
 
 ## Important Notes

DeveloperGuide.md

@@ -52,6 +52,17 @@ This guide focuses on developing for Stirling 2.0, including both the React fron
 - Rust and Cargo (required for Tauri desktop app development)
 - Tauri CLI (install with `cargo install tauri-cli`)
 
+### Optional System Dependencies
+
+These are not required to run the app but enable specific features. The app detects them at startup and disables the relevant features if they are missing.
+
+| Dependency | Feature | Install |
+|---|---|---|
+| LibreOffice | File-to-PDF conversions | `brew install libreoffice` / `apt install libreoffice` |
+| Tesseract | OCR | `brew install tesseract` / `apt install tesseract-ocr` |
+| WeasyPrint | AI document creation | `brew install weasyprint` / `apt install weasyprint` |
+| qpdf | PDF optimisation | `brew install qpdf` / `apt install qpdf` |
+
 ### Setup Steps
 
 1. Clone the repository:
@@ -576,7 +587,7 @@ When adding a new feature or modifying existing ones in Stirling-PDF, you'll nee
 Find the existing `messages.properties` files in the `stirling-pdf/src/main/resources` directory. You'll see files like:
 
 - `messages.properties` (default, usually English)
-- `messages_en_GB.properties`
+- `messages_en_US.properties`
 - `messages_fr_FR.properties`
 - `messages_de_DE.properties`
 - etc.

LICENSE

@@ -10,14 +10,16 @@ if that directory exists, is licensed under the license defined in "app/propriet
 if that directory exists, is licensed under the license defined in "app/saas/LICENSE".
 * All content that resides under the "engine/" directory of this repository,
 if that directory exists, is licensed under the license defined in "engine/LICENSE".
-* All content that resides under the "frontend/src/proprietary/" directory of this repository,
-if that directory exists, is licensed under the license defined in "frontend/src/proprietary/LICENSE".
-* All content that resides under the "frontend/src/desktop/" directory of this repository,
-if that directory exists, is licensed under the license defined in "frontend/src/desktop/LICENSE".
-* All content that resides under the "frontend/src/saas/" directory of this repository,
-if that directory exists, is licensed under the license defined in "frontend/src/saas/LICENSE".
-* All content that resides under the "frontend/src/prototypes/" directory of this repository,
-if that directory exists, is licensed under the license defined in "frontend/src/prototypes/LICENSE".
+* All content that resides under the "frontend/editor/src/proprietary/" directory of this repository,
+if that directory exists, is licensed under the license defined in "frontend/editor/src/proprietary/LICENSE".
+* All content that resides under the "frontend/editor/src/desktop/" directory of this repository,
+if that directory exists, is licensed under the license defined in "frontend/editor/src/desktop/LICENSE".
+* All content that resides under the "frontend/editor/src/saas/" directory of this repository,
+if that directory exists, is licensed under the license defined in "frontend/editor/src/saas/LICENSE".
+* All content that resides under the "frontend/editor/src/prototypes/" directory of this repository,
+if that directory exists, is licensed under the license defined in "frontend/editor/src/prototypes/LICENSE".
+* All content that resides under the "frontend/portal/" directory of this repository,
+if that directory exists, is licensed under the license defined in "frontend/portal/LICENSE".
 * Content outside of the above mentioned directories or restrictions above is
 available under the MIT License as defined below.
 

Taskfile.yml

@@ -60,24 +60,20 @@ tasks:
 
   dev:saas:
     desc: "Start SaaS backend + frontend concurrently on free ports"
-    vars:
-      PORTS:
-        sh: '{{if eq OS "windows"}}{{.FIND_FREE_PORT_PS}} 8080 5173{{else}}{{.FIND_FREE_PORT_SH}} 8080 5173{{end}}'
-      BACKEND_PORT: '{{index (splitList "\n" .PORTS) 0}}'
-      FRONTEND_PORT: '{{index (splitList "\n" .PORTS) 1}}'
-    deps:
-      - task: backend:dev:saas
-        vars:
-          PORT: '{{.BACKEND_PORT}}'
-      - task: frontend:dev:saas
-        vars:
-          PORT: '{{.FRONTEND_PORT}}'
-          BACKEND_URL: 'http://localhost:{{.BACKEND_PORT}}'
-          OPEN: "true"
+    cmds:
+      - task: dev:_all
+        vars: { FRONTEND: saas, BACKEND: saas }
 
   dev:all:
     desc: "Start backend + frontend + engine concurrently on free ports"
+    cmds:
+      - task: dev:_all
+
+  dev:_all:
+    internal: true
     vars:
+      FRONTEND: '{{.FRONTEND | default "proprietary"}}'
+      BACKEND: '{{.BACKEND | default "proprietary"}}'
       PORTS:
         sh: '{{if eq OS "windows"}}{{.FIND_FREE_PORT_PS}} 8080 5173 5001{{else}}{{.FIND_FREE_PORT_SH}} 8080 5173 5001{{end}}'
       BACKEND_PORT: '{{index (splitList "\n" .PORTS) 0}}'
@@ -87,11 +83,11 @@ tasks:
       - task: engine:dev
         vars:
           PORT: '{{.ENGINE_PORT}}'
-      - task: backend:dev
+      - task: 'backend:dev:{{.BACKEND}}'
         vars:
           PORT: '{{.BACKEND_PORT}}'
           AIENGINE_URL: 'http://localhost:{{.ENGINE_PORT}}'
-      - task: frontend:dev:prototypes
+      - task: 'frontend:dev:{{.FRONTEND}}'
         vars:
           PORT: '{{.FRONTEND_PORT}}'
           BACKEND_URL: 'http://localhost:{{.BACKEND_PORT}}'

app/common/build.gradle

@@ -60,7 +60,7 @@ dependencies {
         exclude group: 'com.google.code.gson', module: 'gson'
     }
 
-    api 'com.stirling:jpdfium:1.0.1'
+    api 'com.stirling:jpdfium:1.0.2'
 
     // -PjpdfiumPlatforms=all|<csv of linux-x64,linux-arm64,darwin-x64,darwin-arm64,windows-x64>
     def jpdfiumPlatformsProp = (project.findProperty('jpdfiumPlatforms') ?: 'all').toString().trim()
@@ -75,7 +75,7 @@ dependencies {
     }
     logger.lifecycle("JPDFium native platforms: ${jpdfiumPlatforms.join(', ')}")
     jpdfiumPlatforms.each { platform ->
-        runtimeOnly "com.stirling:jpdfium-natives-${platform}:1.0.1"
+        runtimeOnly "com.stirling:jpdfium-natives-${platform}:1.0.2"
     }
 
     // Bucket4j (local in-process token bucket for RateLimitStore default impl)

app/common/src/main/java/stirling/software/SPDF/pdf/parser/CompositeTableParser.java

@@ -1,73 +0,0 @@
-package stirling.software.SPDF.pdf.parser;
-
-import static stirling.software.SPDF.pdf.parser.PdfModels.*;
-
-import java.io.IOException;
-import java.util.List;
-
-import org.apache.pdfbox.pdmodel.PDDocument;
-import org.springframework.context.annotation.Primary;
-import org.springframework.stereotype.Service;
-
-import lombok.RequiredArgsConstructor;
-import lombok.extern.slf4j.Slf4j;
-
-/**
- * Chains table parsers in priority order: Tabula lattice → Tabula stream → {@link
- * LineAlignmentTableParser}. The first parser returning a result above {@link
- * #TABULA_CONFIDENCE_THRESHOLD} wins; results from different parsers are never mixed on one page.
- */
-@Service
-@Primary
-@RequiredArgsConstructor
-@Slf4j
-public class CompositeTableParser implements TableParser {
-
-    /** Min Tabula confidence to accept results; below this LineAlignment is tried instead. */
-    static final float TABULA_CONFIDENCE_THRESHOLD = 0.5f;
-
-    private final TabulaTableParser tabulaParser;
-    private final LineAlignmentTableParser lineAlignmentParser;
-
-    @Override
-    public List<TableFragment> parse(PDDocument document, RawPage rawPage) throws IOException {
-        // Step 1: Tabula lattice mode (ruled/bordered tables).
-        List<TableFragment> latticeResults = filterConfident(tabulaParser.parse(document, rawPage));
-        if (!latticeResults.isEmpty()) {
-            log.debug(
-                    "Page {}: using Tabula lattice ({} table(s))",
-                    rawPage.pageNumber(),
-                    latticeResults.size());
-            return latticeResults;
-        }
-
-        // Step 2: Tabula stream mode (borderless/whitespace-delimited tables).
-        // parseStream is not on the TableParser interface — this intentionally couples to the
-        // concrete TabulaTableParser since stream mode is a Tabula-specific concept.
-        List<TableFragment> streamResults =
-                filterConfident(tabulaParser.parseStream(document, rawPage));
-        if (!streamResults.isEmpty()) {
-            log.debug(
-                    "Page {}: using Tabula stream ({} table(s))",
-                    rawPage.pageNumber(),
-                    streamResults.size());
-            return streamResults;
-        }
-
-        // Step 3: Geometry-based line-alignment fallback.
-        List<TableFragment> lineResults = lineAlignmentParser.parse(document, rawPage);
-        if (!lineResults.isEmpty()) {
-            log.debug(
-                    "Page {}: using LineAlignment ({} table(s))",
-                    rawPage.pageNumber(),
-                    lineResults.size());
-            return lineResults;
-        }
-
-        return List.of();
-    }
-
-    private List<TableFragment> filterConfident(List<TableFragment> tables) {
-        return tables.stream().filter(t -> t.confidence() >= TABULA_CONFIDENCE_THRESHOLD).toList();
-    }
-}

app/common/src/main/java/stirling/software/SPDF/pdf/parser/LineAlignmentTableParser.java

@@ -1,528 +0,0 @@
-package stirling.software.SPDF.pdf.parser;
-
-import static stirling.software.SPDF.pdf.parser.PdfModels.*;
-
-import java.io.IOException;
-import java.util.ArrayList;
-import java.util.Arrays;
-import java.util.Collections;
-import java.util.Comparator;
-import java.util.HashMap;
-import java.util.List;
-import java.util.Map;
-import java.util.Optional;
-import java.util.TreeMap;
-import java.util.regex.Pattern;
-
-import org.apache.pdfbox.pdmodel.PDDocument;
-import org.springframework.stereotype.Service;
-
-import lombok.extern.slf4j.Slf4j;
-
-/**
- * Fallback {@link TableParser} for borderless financial tables using text geometry.
- *
- * <p>Identifies "anchor lines" (≥2 numeric tokens), builds a column grid from their right-edge
- * positions, groups vertically proximate anchor lines into table candidates, then scores each group
- * on column consistency and anchor density (confidence ceiling 0.85).
- */
-@Service
-@Slf4j
-public class LineAlignmentTableParser implements TableParser {
-
-    /** Width in points of each column position bucket. */
-    static final float COLUMN_BUCKET_PT = 5f;
-
-    /** Tolerance in buckets when matching a token's right-edge to a confirmed column position. */
-    private static final int COLUMN_MATCH_BUCKETS = 2;
-
-    /** Maximum gap (as a multiple of modal line spacing) before splitting a group. */
-    private static final float MAX_GAP_FACTOR = 2.5f;
-
-    /** Minimum anchor rows (numeric-heavy) to form a valid table. */
-    static final int MIN_TABLE_ROWS = 3;
-
-    /** Minimum confirmed column positions to form a valid table. */
-    static final int MIN_COLUMNS = 2;
-
-    /**
-     * Min fraction of anchor lines a column must appear on to be confirmed (permissive for N/A
-     * rows).
-     */
-    private static final double COLUMN_MIN_FREQUENCY = 0.40;
-
-    /**
-     * Matches financial numeric tokens: integers, decimals, parenthetical negatives, currency,
-     * percent, nil dashes.
-     */
-    private static final Pattern NUMERIC =
-            Pattern.compile("^[\\(\\-\\$£€¥]?\\d[\\d,\\.]*[\\)%]?$|^[-–—]$");
-
-    /**
-     * Lines within this y-distance are merged into one row (restores rows split by LineBuilder's
-     * column-gap logic).
-     */
-    static final float ROW_MERGE_TOLERANCE_PT = 2f;
-
-    // ── public API ───────────────────────────────────────────────────────────────────────────────
-
-    @Override
-    public List<TableFragment> parse(PDDocument document, RawPage rawPage) throws IOException {
-        List<RawLine> lines = rawPage.lines();
-        if (lines.size() < MIN_TABLE_ROWS) return List.of();
-
-        float modalSpacing = computeModalSpacing(lines);
-        List<TokenizedLine> tokenized =
-                mergeCoincidentLines(lines.stream().map(this::tokenize).toList());
-
-        List<TokenizedLine> anchors = tokenized.stream().filter(TokenizedLine::isAnchor).toList();
-
-        if (anchors.size() < MIN_TABLE_ROWS) return List.of();
-
-        List<Float> columnGrid = buildColumnGrid(anchors);
-        if (columnGrid.size() < MIN_COLUMNS) {
-            log.debug(
-                    "Page {}: LineAlignment — fewer than {} confirmed columns, skipping",
-                    rawPage.pageNumber(),
-                    MIN_COLUMNS);
-            return List.of();
-        }
-
-        List<List<TokenizedLine>> groups = groupRows(tokenized, columnGrid, modalSpacing);
-
-        List<TableFragment> results = new ArrayList<>();
-        for (int i = 0; i < groups.size(); i++) {
-            buildFragment(groups.get(i), columnGrid, rawPage.pageNumber(), i)
-                    .ifPresent(results::add);
-        }
-
-        log.debug(
-                "Page {}: LineAlignment detected {} table(s) ({} anchor lines, {} columns)",
-                rawPage.pageNumber(),
-                results.size(),
-                anchors.size(),
-                columnGrid.size());
-        return results;
-    }
-
-    // ── coincident-line merging ──────────────────────────────────────────────────────────────────
-
-    /**
-     * Merges tokenised lines sharing the same y-position into one row, rejoining label/value halves
-     * split by LineBuilder.
-     */
-    List<TokenizedLine> mergeCoincidentLines(List<TokenizedLine> tokenized) {
-        if (tokenized.size() < 2) return tokenized;
-
-        List<TokenizedLine> result = new ArrayList<>();
-        int i = 0;
-
-        while (i < tokenized.size()) {
-            float baseY = tokenized.get(i).line().bounds().y();
-            int j = i + 1;
-            while (j < tokenized.size()
-                    && Math.abs(tokenized.get(j).line().bounds().y() - baseY)
-                            <= ROW_MERGE_TOLERANCE_PT) {
-                j++;
-            }
-
-            if (j == i + 1) {
-                result.add(tokenized.get(i));
-            } else {
-                result.add(mergeGroup(tokenized.subList(i, j)));
-            }
-            i = j;
-        }
-
-        return result;
-    }
-
-    private TokenizedLine mergeGroup(List<TokenizedLine> group) {
-        List<TextFragment> mergedFragments =
-                group.stream()
-                        .flatMap(tl -> tl.line().fragments().stream())
-                        .sorted(Comparator.comparingDouble(f -> f.bounds().x()))
-                        .toList();
-
-        Bounds mergedBounds =
-                group.stream()
-                        .map(tl -> tl.line().bounds())
-                        .reduce(Bounds::merge)
-                        .orElse(group.get(0).line().bounds());
-
-        RawLine mergedLine =
-                new RawLine(
-                        group.get(0).line().lineId(),
-                        mergedFragments,
-                        mergedBounds,
-                        group.get(0).line().pageNumber());
-
-        return tokenize(mergedLine);
-    }
-
-    // ── tokenisation ─────────────────────────────────────────────────────────────────────────────
-
-    /**
-     * Splits fragments into word-level tokens; x-positions are estimated linearly within each
-     * fragment.
-     */
-    TokenizedLine tokenize(RawLine line) {
-        List<LineToken> tokens = new ArrayList<>();
-        for (TextFragment frag : line.fragments()) {
-            tokens.addAll(tokensFromFragment(frag));
-        }
-        List<LineToken> numeric = tokens.stream().filter(LineToken::numeric).toList();
-        return new TokenizedLine(line, tokens, numeric);
-    }
-
-    private List<LineToken> tokensFromFragment(TextFragment frag) {
-        String raw = frag.text();
-        if (raw == null || raw.isBlank()) return List.of();
-
-        float fragX = frag.bounds().x();
-        float fragWidth = frag.bounds().width();
-        int rawLen = raw.length();
-
-        List<LineToken> result = new ArrayList<>();
-        int offset = 0;
-        for (String part : raw.split("\\s+")) {
-            if (part.isEmpty()) {
-                offset++;
-                continue;
-            }
-            int idx = raw.indexOf(part, offset);
-            if (idx < 0) idx = offset;
-
-            float tokenX = rawLen > 0 ? fragX + ((float) idx / rawLen) * fragWidth : fragX;
-            float tokenRight =
-                    rawLen > 0
-                            ? fragX + ((float) (idx + part.length()) / rawLen) * fragWidth
-                            : fragX + fragWidth;
-
-            result.add(new LineToken(part, tokenX, tokenRight, NUMERIC.matcher(part).matches()));
-            offset = idx + part.length();
-        }
-        return result;
-    }
-
-    // ── column grid ──────────────────────────────────────────────────────────────────────────────
-
-    /**
-     * Returns confirmed column right-edge positions — those appearing on ≥ {@value
-     * #COLUMN_MIN_FREQUENCY} × N anchor lines.
-     */
-    private List<Float> buildColumnGrid(List<TokenizedLine> anchors) {
-        // bucket → set of line indices that contributed a numeric token to that bucket
-        Map<Integer, List<Integer>> bucketLines = new HashMap<>();
-        for (int i = 0; i < anchors.size(); i++) {
-            for (LineToken t : anchors.get(i).numeric()) {
-                int bucket = bucket(t.right());
-                bucketLines.computeIfAbsent(bucket, k -> new ArrayList<>()).add(i);
-            }
-        }
-
-        int minHits =
-                Math.max(MIN_TABLE_ROWS, (int) Math.ceil(anchors.size() * COLUMN_MIN_FREQUENCY));
-
-        // Confirmed buckets → average right-edge for that bucket
-        TreeMap<Integer, Float> confirmed = new TreeMap<>();
-        for (Map.Entry<Integer, List<Integer>> entry : bucketLines.entrySet()) {
-            // Count distinct lines
-            long distinctLines = entry.getValue().stream().distinct().count();
-            if (distinctLines >= minHits) {
-                double avg =
-                        entry.getValue().stream()
-                                .distinct() // weight each line equally regardless of token count
-                                .mapToDouble(
-                                        lineIdx ->
-                                                avgRightEdgeForBucket(
-                                                        anchors, lineIdx, entry.getKey()))
-                                .average()
-                                .orElse(entry.getKey() * (double) COLUMN_BUCKET_PT);
-                confirmed.put(entry.getKey(), (float) avg);
-            }
-        }
-
-        return new ArrayList<>(confirmed.values()); // already sorted by bucket (left to right)
-    }
-
-    /**
-     * Returns the average right-edge position of tokens in {@code line} whose bucket matches {@code
-     * targetBucket}, falling back to the bucket's nominal centre when no tokens match.
-     */
-    private double avgRightEdgeForBucket(
-            List<TokenizedLine> anchors, int lineIdx, int targetBucket) {
-        return anchors.get(lineIdx).numeric().stream()
-                .filter(t -> bucket(t.right()) == targetBucket)
-                .mapToDouble(LineToken::right)
-                .average()
-                .orElse(targetBucket * (double) COLUMN_BUCKET_PT);
-    }
-
-    // ── grouping ─────────────────────────────────────────────────────────────────────────────────
-
-    /**
-     * Groups anchor lines into table candidates, including adjacent label rows; a gap &gt;
-     * MAX_GAP_FACTOR × modal spacing splits groups.
-     */
-    private List<List<TokenizedLine>> groupRows(
-            List<TokenizedLine> all, List<Float> columnGrid, float modalSpacing) {
-        float maxGap = modalSpacing > 0 ? modalSpacing * MAX_GAP_FACTOR : 30f;
-
-        List<List<TokenizedLine>> groups = new ArrayList<>();
-        List<TokenizedLine> current = new ArrayList<>();
-
-        for (int i = 0; i < all.size(); i++) {
-            TokenizedLine tl = all.get(i);
-            boolean fits = tl.isAnchor() && matchesGrid(tl, columnGrid);
-
-            if (current.isEmpty()) {
-                if (fits) current.add(tl);
-                continue;
-            }
-
-            float gap =
-                    tl.line().bounds().y()
-                            - current.get(current.size() - 1).line().bounds().bottom();
-
-            if (gap > maxGap) {
-                groups.add(current);
-                current = new ArrayList<>();
-                if (fits) current.add(tl);
-                continue;
-            }
-
-            if (fits) {
-                current.add(tl);
-            } else if (!tl.line().text().isBlank()) {
-                // Include non-anchor lines (labels) only if they have text and are within
-                // proximity.
-                current.add(tl);
-            }
-        }
-
-        if (!current.isEmpty()) groups.add(current);
-
-        return groups.stream().filter(g -> hasEnoughAnchorRows(g, columnGrid)).toList();
-    }
-
-    private boolean hasEnoughAnchorRows(List<TokenizedLine> group, List<Float> columnGrid) {
-        return group.stream().filter(r -> r.isAnchor() && matchesGrid(r, columnGrid)).count()
-                >= MIN_TABLE_ROWS;
-    }
-
-    /** A line "matches" the grid when ≥ 60 % of its numeric tokens land in confirmed columns. */
-    private boolean matchesGrid(TokenizedLine tl, List<Float> columnGrid) {
-        if (tl.numeric().isEmpty()) return false;
-        long matches =
-                tl.numeric().stream()
-                        .filter(t -> nearestColumnIndex(t.right(), columnGrid) >= 0)
-                        .count();
-        return (double) matches / tl.numeric().size() >= 0.60;
-    }
-
-    private boolean hasInconsistentColumnMatch(TokenizedLine tl, List<Float> columnGrid) {
-        if (tl.numeric().isEmpty()) return false;
-        long hits =
-                tl.numeric().stream()
-                        .filter(t -> nearestColumnIndex(t.right(), columnGrid) >= 0)
-                        .count();
-        return (double) hits / tl.numeric().size() < 0.60;
-    }
-
-    // ── fragment assembly ────────────────────────────────────────────────────────────────────────
-
-    private Optional<TableFragment> buildFragment(
-            List<TokenizedLine> group, List<Float> columnGrid, int pageNumber, int tableIndex) {
-
-        long anchorCount =
-                group.stream().filter(r -> r.isAnchor() && matchesGrid(r, columnGrid)).count();
-        if (anchorCount < MIN_TABLE_ROWS) return Optional.empty();
-
-        List<String> warnings = new ArrayList<>();
-        List<List<String>> rawRows = new ArrayList<>();
-        List<TableRow> rows = new ArrayList<>();
-
-        for (int rowIdx = 0; rowIdx < group.size(); rowIdx++) {
-            TokenizedLine tl = group.get(rowIdx);
-            List<String> rawRow = buildRawRow(tl, columnGrid);
-            rawRows.add(Collections.unmodifiableList(rawRow));
-            rows.add(buildTableRow(rowIdx, tl, rawRow, columnGrid));
-        }
-
-        // Column count = 1 label column + confirmed numeric columns
-        int colCount = columnGrid.size() + 1;
-        Bounds bounds = computeGroupBounds(group);
-        float confidence = computeConfidence(group, columnGrid, warnings);
-
-        return Optional.of(
-                new TableFragment(
-                        "tbl-la-p" + pageNumber + "-" + tableIndex,
-                        pageNumber,
-                        bounds,
-                        List.of(),
-                        Collections.unmodifiableList(rows),
-                        Collections.unmodifiableList(rawRows),
-                        colCount,
-                        confidence,
-                        Collections.unmodifiableList(warnings),
-                        null));
-    }
-
-    /**
-     * Builds a raw row as a list of strings: index 0 = label text, indices 1..N = column values.
-     */
-    private List<String> buildRawRow(TokenizedLine tl, List<Float> columnGrid) {
-        String[] cells = new String[columnGrid.size() + 1];
-        Arrays.fill(cells, "");
-
-        // Separate label tokens (those not landing in any confirmed column) from column tokens.
-        List<String> labelParts = new ArrayList<>();
-        for (LineToken token : tl.all()) {
-            int col = nearestColumnIndex(token.right(), columnGrid);
-            if (col >= 0 && token.numeric()) {
-                int cellIdx = col + 1;
-                cells[cellIdx] =
-                        cells[cellIdx].isEmpty()
-                                ? token.text()
-                                : cells[cellIdx] + " " + token.text();
-            } else {
-                labelParts.add(token.text());
-            }
-        }
-        cells[0] = String.join(" ", labelParts).trim();
-        return Arrays.asList(cells);
-    }
-
-    private TableRow buildTableRow(
-            int rowIdx, TokenizedLine tl, List<String> rawRow, List<Float> columnGrid) {
-        List<TableCell> cells = new ArrayList<>(rawRow.size());
-
-        // Label cell: use the line's full bounds as an approximation.
-        cells.add(TableCell.of(0, rawRow.get(0), tl.line().bounds()));
-
-        for (int col = 0; col < columnGrid.size(); col++) {
-            String text = col + 1 < rawRow.size() ? rawRow.get(col + 1) : "";
-            float right = columnGrid.get(col);
-            float left = col > 0 ? columnGrid.get(col - 1) : right - 50f;
-            Bounds cellBounds =
-                    new Bounds(
-                            left,
-                            tl.line().bounds().y(),
-                            right - left,
-                            tl.line().bounds().height());
-            cells.add(TableCell.of(col + 1, text, cellBounds));
-        }
-        return new TableRow(rowIdx, Collections.unmodifiableList(cells));
-    }
-
-    // ── confidence scoring ───────────────────────────────────────────────────────────────────────
-
-    /**
-     * Heuristic score in [0.0, 0.85] (ceiling keeps results below Tabula lattice which starts at
-     * 1.0). Base 0.70; +0.05/col beyond 2 (max +0.10); +0.05 at ≥5 anchors, +0.05 at ≥8; −0.15 if
-     * &gt;30 % of anchors have inconsistent columns; −0.10 if non-anchors outnumber anchors.
-     */
-    private float computeConfidence(
-            List<TokenizedLine> group, List<Float> columnGrid, List<String> warnings) {
-        float score = 0.70f;
-
-        long anchorCount =
-                group.stream().filter(r -> r.isAnchor() && matchesGrid(r, columnGrid)).count();
-        long totalRows = group.size();
-
-        // More columns
-        int extraCols = Math.min(columnGrid.size() - MIN_COLUMNS, 2);
-        score += extraCols * 0.05f;
-
-        // More anchor rows
-        if (anchorCount >= 5) score += 0.05f;
-        if (anchorCount >= 8) score += 0.05f;
-
-        // Inconsistent column matching
-        long inconsistent =
-                group.stream()
-                        .filter(TokenizedLine::isAnchor)
-                        .filter(tl -> hasInconsistentColumnMatch(tl, columnGrid))
-                        .count();
-        if (inconsistent > anchorCount * 0.30) {
-            score -= 0.15f;
-            warnings.add(
-                    "Column match inconsistent on "
-                            + inconsistent
-                            + "/"
-                            + anchorCount
-                            + " anchor rows");
-        }
-
-        // Label-heavy
-        long nonAnchor = totalRows - anchorCount;
-        if (nonAnchor > anchorCount) {
-            score -= 0.10f;
-            warnings.add(
-                    "Non-anchor rows ("
-                            + nonAnchor
-                            + ") outnumber anchor rows ("
-                            + anchorCount
-                            + ")");
-        }
-
-        return Math.max(0f, Math.min(0.85f, score));
-    }
-
-    // ── utility ──────────────────────────────────────────────────────────────────────────────────
-
-    /**
-     * Returns the grid index nearest to {@code rightEdge}, or -1 if none is within {@value
-     * #COLUMN_MATCH_BUCKETS} buckets.
-     */
-    private int nearestColumnIndex(float rightEdge, List<Float> grid) {
-        int nearest = -1;
-        float minDist = COLUMN_MATCH_BUCKETS * COLUMN_BUCKET_PT + 1f;
-        for (int i = 0; i < grid.size(); i++) {
-            float dist = Math.abs(rightEdge - grid.get(i));
-            if (dist < minDist) {
-                minDist = dist;
-                nearest = i;
-            }
-        }
-        return nearest;
-    }
-
-    private Bounds computeGroupBounds(List<TokenizedLine> group) {
-        return group.stream()
-                .map(tl -> tl.line().bounds())
-                .reduce(Bounds::merge)
-                .orElse(new Bounds(0, 0, 0, 0));
-    }
-
-    /** Modal gap between consecutive line edges, used to calibrate the group-split threshold. */
-    private float computeModalSpacing(List<RawLine> lines) {
-        if (lines.size() < 2) return 0f;
-        Map<Float, Long> freq = new HashMap<>();
-        for (int i = 1; i < lines.size(); i++) {
-            float gap = lines.get(i).bounds().y() - lines.get(i - 1).bounds().bottom();
-            if (gap > 0) freq.merge(Math.round(gap / 2f) * 2f, 1L, Long::sum);
-        }
-        return freq.entrySet().stream()
-                .max(Map.Entry.comparingByValue())
-                .map(Map.Entry::getKey)
-                .orElse(0f);
-    }
-
-    private static int bucket(float x) {
-        return Math.round(x / COLUMN_BUCKET_PT);
-    }
-
-    // ── private data types ───────────────────────────────────────────────────────────────────────
-
-    /** A word-level token with an approximate right-edge x-position. */
-    record LineToken(String text, float x, float right, boolean numeric) {}
-
-    /** A {@link RawLine} with tokens pre-computed; an "anchor" has ≥ 2 numeric tokens. */
-    record TokenizedLine(RawLine line, List<LineToken> all, List<LineToken> numeric) {
-        boolean isAnchor() {
-            return numeric.size() >= 2;
-        }
-    }
-}

app/common/src/main/java/stirling/software/SPDF/pdf/parser/LineBuilder.java

@@ -1,139 +0,0 @@
-package stirling.software.SPDF.pdf.parser;
-
-import static stirling.software.SPDF.pdf.parser.PdfModels.*;
-
-import java.util.ArrayList;
-import java.util.Comparator;
-import java.util.List;
-
-import org.springframework.stereotype.Service;
-
-import lombok.extern.slf4j.Slf4j;
-
-/**
- * Groups {@link TextFragment} objects into visual {@link RawLine}s using baseline proximity.
- *
- * <p>Fragments are on the same line when their baselines are within a font-size-derived tolerance.
- * A new line starts whenever the horizontal gap exceeds an adaptive column-gap threshold ({@code
- * max(effectiveWidth * COLUMN_GAP_RATIO, COLUMN_GAP_MIN_PT)}), splitting two-column text.
- */
-@Service
-@Slf4j
-public class LineBuilder {
-
-    /** Baseline tolerance as a fraction of font size; 0.5 keeps mixed-size text on one line. */
-    private static final float BASELINE_TOLERANCE_FACTOR = 0.5f;
-
-    /** Absolute minimum tolerance so tiny font sizes don't collapse multi-line content. */
-    private static final float MIN_BASELINE_TOLERANCE = 2f;
-
-    /**
-     * Column-gap threshold as a fraction of page width; 0.10 clears tab stops but stays below
-     * two-column gutters.
-     */
-    static final float COLUMN_GAP_RATIO = 0.10f;
-
-    /** Floor for the column-gap threshold so narrow pages don't over-split lines. */
-    static final float COLUMN_GAP_MIN_PT = 40f;
-
-    public List<RawLine> build(List<TextFragment> fragments, int pageNumber) {
-        if (fragments.isEmpty()) return List.of();
-
-        float effectiveWidth = inferEffectiveWidth(fragments);
-        float columnGapThreshold = Math.max(effectiveWidth * COLUMN_GAP_RATIO, COLUMN_GAP_MIN_PT);
-        log.debug(
-                "LineBuilder page {}: effectiveWidth={:.1f}pt, columnGapThreshold={:.1f}pt",
-                pageNumber,
-                effectiveWidth,
-                columnGapThreshold);
-
-        // Sort top-to-bottom first, then left-to-right within the same baseline band.
-        List<TextFragment> sorted =
-                fragments.stream()
-                        .sorted(
-                                Comparator.comparingDouble(TextFragment::baseline)
-                                        .thenComparingDouble(f -> f.bounds().x()))
-                        .toList();
-
-        List<List<TextFragment>> groups = groupByBaseline(sorted, columnGapThreshold);
-
-        List<RawLine> lines = new ArrayList<>(groups.size());
-        for (int i = 0; i < groups.size(); i++) {
-            List<TextFragment> group =
-                    groups.get(i).stream()
-                            .sorted(Comparator.comparingDouble(f -> f.bounds().x()))
-                            .toList();
-
-            Bounds lineBounds =
-                    group.stream()
-                            .map(TextFragment::bounds)
-                            .reduce(Bounds::merge)
-                            .orElse(new Bounds(0, 0, 0, 0));
-
-            lines.add(new RawLine("ln-p" + pageNumber + "-" + i, group, lineBounds, pageNumber));
-        }
-        return lines;
-    }
-
-    private List<List<TextFragment>> groupByBaseline(
-            List<TextFragment> sorted, float columnGapThreshold) {
-        List<List<TextFragment>> groups = new ArrayList<>();
-        List<TextFragment> current = new ArrayList<>();
-        float currentBaseline = Float.NaN;
-
-        for (TextFragment fragment : sorted) {
-            if (current.isEmpty()) {
-                current.add(fragment);
-                currentBaseline = fragment.baseline();
-                continue;
-            }
-
-            float maxFontSize =
-                    Math.max(
-                            fragment.fontSize(),
-                            (float)
-                                    current.stream()
-                                            .mapToDouble(TextFragment::fontSize)
-                                            .max()
-                                            .orElse(0));
-            float tolerance =
-                    Math.max(maxFontSize * BASELINE_TOLERANCE_FACTOR, MIN_BASELINE_TOLERANCE);
-
-            boolean sameBaseline = Math.abs(fragment.baseline() - currentBaseline) <= tolerance;
-            boolean columnGap = sameBaseline && hasColumnGap(fragment, current, columnGapThreshold);
-
-            if (sameBaseline && !columnGap) {
-                current.add(fragment);
-                // Anchor to the weighted mean baseline so long lines stay stable.
-                currentBaseline =
-                        (currentBaseline * (current.size() - 1) + fragment.baseline())
-                                / current.size();
-            } else {
-                groups.add(current);
-                current = new ArrayList<>();
-                current.add(fragment);
-                currentBaseline = fragment.baseline();
-            }
-        }
-
-        if (!current.isEmpty()) groups.add(current);
-        return groups;
-    }
-
-    /**
-     * True when the gap from the rightmost fragment in {@code group} to {@code next} exceeds {@code
-     * threshold}.
-     */
-    private static boolean hasColumnGap(
-            TextFragment next, List<TextFragment> group, float threshold) {
-        float lastRight = group.get(group.size() - 1).bounds().right();
-        return next.bounds().x() - lastRight > threshold;
-    }
-
-    /** Infers effective page width from the rightmost fragment right-edge plus a 10 % margin. */
-    private static float inferEffectiveWidth(List<TextFragment> fragments) {
-        double maxRight =
-                fragments.stream().mapToDouble(f -> f.bounds().right()).max().orElse(500.0);
-        return (float) maxRight * 1.10f;
-    }
-}

app/common/src/main/java/stirling/software/SPDF/pdf/parser/PageColumnLayout.java

@@ -0,0 +1,142 @@
+package stirling.software.SPDF.pdf.parser;
+
+import java.util.ArrayList;
+import java.util.List;
+
+/**
+ * Detects whether a page is one- or two-column from per-line bounding boxes, and classifies an
+ * X-span into the column it belongs to. Detection is a midpoint vote at {@code pageWidth / 2}.
+ *
+ * <p>Capped at two columns by design — sufficient for the redaction target set (single-column
+ * documents and IEEE-style two-column papers). 3+ column layouts (newspapers, magazines) and
+ * off-centre gutters (asymmetric two-column) would need a histogram or clustering approach to
+ * detect the actual gutter X. (future work)
+ *
+ * <p>Coordinates are PDFTextStripper screen space (top-left origin, Y increases downward).
+ */
+public final class PageColumnLayout {
+
+    /**
+     * Slack when checking "crosses a gutter" so single-pixel overshoots don't mark a line as
+     * spanning.
+     */
+    public static final float SPAN_SLACK_PT = 2f;
+
+    /**
+     * Slack on each side of the page midpoint inside which a line is considered "spanning"
+     * (covering both columns) rather than belonging to one side.
+     */
+    private static final float MIDPOINT_SLACK_PT = 30f;
+
+    /**
+     * Minimum line width (points) for a line to count toward the two-column tally. Avoids false
+     * positives where right-aligned dates, page numbers, or short "Link" fragments next to a
+     * heading look like a second column when they're really just inline metadata.
+     */
+    private static final float MIN_COLUMN_LINE_WIDTH_PT = 100f;
+
+    /**
+     * Minimum number of clearly leftish AND clearly rightish lines (each of width &ge; {@link
+     * #MIN_COLUMN_LINE_WIDTH_PT}) required to call the page two-column. Anything below this falls
+     * back to single-column.
+     */
+    private static final int MIN_SIDE_LINES = 3;
+
+    private final List<float[]> columns;
+    private final List<float[]> gutters;
+
+    private PageColumnLayout(List<float[]> columns, List<float[]> gutters) {
+        this.columns = columns;
+        this.gutters = gutters;
+    }
+
+    /**
+     * Determines column layout from per-line bounding boxes ({@code [x1, _, x2, _]}). Counts lines
+     * whose X-midpoint sits clearly left of, or clearly right of, the page midpoint (with {@link
+     * #MIDPOINT_SLACK_PT} slack each side). If both sides have at least {@link #MIN_SIDE_LINES}
+     * lines, the page is treated as two-column with the gutter at the page midpoint. Otherwise it's
+     * single-column.
+     *
+     * <p>Cross-column lines must already be split: callers should feed boxes from a line extractor
+     * that splits same-Y glyphs at large X gaps (see {@code AllTextLineExtractor}). Without that
+     * split, IEEE-style aligned-baseline 2-column PDFs produce one wide merged box per row and the
+     * side tallies all end up classified as "spanning", falling to single-column.
+     */
+    public static PageColumnLayout fromLineBoxes(List<float[]> lineBoxes, float pageWidth) {
+        if (lineBoxes == null || lineBoxes.isEmpty()) {
+            return new PageColumnLayout(List.of(new float[] {0f, pageWidth}), List.of());
+        }
+        float pageMid = pageWidth / 2f;
+        int left = 0, right = 0;
+        for (float[] lb : lineBoxes) {
+            if (lb == null || lb.length < 3) continue;
+            float width = lb[2] - lb[0];
+            // Skip narrow lines — dates, page numbers, "Link" labels next to a heading should
+            // not, on their own, make a single-column doc look two-column.
+            if (width < MIN_COLUMN_LINE_WIDTH_PT) continue;
+            float mid = (lb[0] + lb[2]) * 0.5f;
+            if (mid < pageMid - MIDPOINT_SLACK_PT) left++;
+            else if (mid > pageMid + MIDPOINT_SLACK_PT) right++;
+        }
+        if (left < MIN_SIDE_LINES || right < MIN_SIDE_LINES) {
+            return new PageColumnLayout(List.of(new float[] {0f, pageWidth}), List.of());
+        }
+        float gutterL = pageMid - MIDPOINT_SLACK_PT;
+        float gutterR = pageMid + MIDPOINT_SLACK_PT;
+        return new PageColumnLayout(
+                List.of(new float[] {0f, gutterL}, new float[] {gutterR, pageWidth}),
+                List.of(new float[] {gutterL, gutterR}));
+    }
+
+    /** All columns, left-to-right, as {@code [leftX, rightX]} pairs. Never empty. */
+    public List<float[]> columns() {
+        return columns;
+    }
+
+    /** Gutters between columns, left-to-right, as {@code [leftX, rightX]} pairs. */
+    public List<float[]> gutters() {
+        return gutters;
+    }
+
+    public int columnCount() {
+        return columns.size();
+    }
+
+    /**
+     * Returns the column index containing the X-midpoint of {@code [x1, x2]}, falling back to the
+     * closest column if the midpoint sits inside a gutter.
+     */
+    public int columnOf(float x1, float x2) {
+        float mid = (x1 + x2) * 0.5f;
+        int best = 0;
+        float bestDist = Float.MAX_VALUE;
+        for (int i = 0; i < columns.size(); i++) {
+            float[] c = columns.get(i);
+            if (mid >= c[0] && mid <= c[1]) return i;
+            float dist = mid < c[0] ? c[0] - mid : mid - c[1];
+            if (dist < bestDist) {
+                bestDist = dist;
+                best = i;
+            }
+        }
+        return best;
+    }
+
+    /**
+     * Returns every column index whose X-range overlaps {@code [x1, x2]} with at least {@link
+     * #SPAN_SLACK_PT} of intrusion. A normal in-column line returns one index; a line crossing a
+     * gutter returns two or more.
+     */
+    public int[] columnsCrossing(float x1, float x2) {
+        List<Integer> hits = new ArrayList<>();
+        for (int i = 0; i < columns.size(); i++) {
+            float[] c = columns.get(i);
+            float overlap = Math.min(x2, c[1]) - Math.max(x1, c[0]);
+            if (overlap > SPAN_SLACK_PT) hits.add(i);
+        }
+        if (hits.isEmpty()) hits.add(columnOf(x1, x2));
+        int[] out = new int[hits.size()];
+        for (int i = 0; i < hits.size(); i++) out[i] = hits.get(i);
+        return out;
+    }
+}

app/common/src/main/java/stirling/software/SPDF/pdf/parser/PageImageLocator.java

@@ -0,0 +1,133 @@
+package stirling.software.SPDF.pdf.parser;
+
+import java.awt.geom.Point2D;
+import java.io.IOException;
+import java.util.ArrayList;
+import java.util.List;
+
+import org.apache.pdfbox.contentstream.PDFGraphicsStreamEngine;
+import org.apache.pdfbox.cos.COSName;
+import org.apache.pdfbox.pdmodel.PDPage;
+import org.apache.pdfbox.pdmodel.graphics.image.PDImage;
+import org.apache.pdfbox.util.Matrix;
+
+/**
+ * PDFGraphicsStreamEngine that intercepts {@code drawImage} calls and records each image's bounding
+ * box in PDF user-space (origin bottom-left, Y up) by transforming the unit square through the
+ * current transformation matrix (CTM).
+ *
+ * <p>Usage:
+ *
+ * <pre>{@code
+ * PageImageLocator locator = new PageImageLocator(page, pageIndex);
+ * locator.processPage(page);
+ * List<ImageBox> boxes = locator.getImageBoxes();
+ * }</pre>
+ *
+ * <p>Each {@link ImageBox} carries the 0-based page index and the axis-aligned bounding box {@code
+ * (x1, y1, x2, y2)} in PDF user-space coordinates.
+ */
+public final class PageImageLocator extends PDFGraphicsStreamEngine {
+
+    /**
+     * Bounding box of a raster or vector image found on a PDF page.
+     *
+     * @param pageIndex 0-based page index
+     * @param x1 left edge in PDF user-space (origin bottom-left)
+     * @param y1 bottom edge in PDF user-space
+     * @param x2 right edge
+     * @param y2 top edge
+     */
+    public record ImageBox(int pageIndex, float x1, float y1, float x2, float y2) {}
+
+    private final int pageIndex;
+    private final List<ImageBox> imageBoxes = new ArrayList<>();
+    private final Point2D.Float currentPoint = new Point2D.Float();
+
+    /**
+     * @param page the PDPage to process
+     * @param pageIndex 0-based index of this page in the document (stored on each returned {@link
+     *     ImageBox})
+     */
+    public PageImageLocator(PDPage page, int pageIndex) {
+        super(page);
+        this.pageIndex = pageIndex;
+    }
+
+    /** Returns all image bounding boxes collected during {@link #processPage}. */
+    public List<ImageBox> getImageBoxes() {
+        return imageBoxes;
+    }
+
+    @Override
+    public void drawImage(PDImage pdImage) throws IOException {
+        Matrix ctm = getGraphicsState().getCurrentTransformationMatrix();
+        // An image occupies the unit square (0,0)→(1,1) in image space.
+        // Transform all four corners through the CTM to get the page-space bounding box.
+        float a = ctm.getScaleX();
+        float b = ctm.getShearY();
+        float c = ctm.getShearX();
+        float d = ctm.getScaleY();
+        float e = ctm.getTranslateX();
+        float f = ctm.getTranslateY();
+        float[] xs = {e, a + e, c + e, a + c + e};
+        float[] ys = {f, b + f, d + f, b + d + f};
+        float x1 = Float.MAX_VALUE, y1 = Float.MAX_VALUE;
+        float x2 = -Float.MAX_VALUE, y2 = -Float.MAX_VALUE;
+        for (float x : xs) {
+            x1 = Math.min(x1, x);
+            x2 = Math.max(x2, x);
+        }
+        for (float y : ys) {
+            y1 = Math.min(y1, y);
+            y2 = Math.max(y2, y);
+        }
+        imageBoxes.add(new ImageBox(pageIndex, x1, y1, x2, y2));
+    }
+
+    // ---------- required abstract methods (no-op for path operations) ----------
+
+    @Override
+    public void appendRectangle(Point2D p0, Point2D p1, Point2D p2, Point2D p3) {}
+
+    @Override
+    public void clip(int windingRule) {}
+
+    @Override
+    public void moveTo(float x, float y) {
+        currentPoint.setLocation(x, y);
+    }
+
+    @Override
+    public void lineTo(float x, float y) {
+        currentPoint.setLocation(x, y);
+    }
+
+    @Override
+    public void curveTo(float x1, float y1, float x2, float y2, float x3, float y3) {
+        currentPoint.setLocation(x3, y3);
+    }
+
+    @Override
+    public Point2D getCurrentPoint() {
+        return currentPoint;
+    }
+
+    @Override
+    public void closePath() {}
+
+    @Override
+    public void endPath() {}
+
+    @Override
+    public void strokePath() {}
+
+    @Override
+    public void fillPath(int windingRule) {}
+
+    @Override
+    public void fillAndStrokePath(int windingRule) {}
+
+    @Override
+    public void shadingFill(COSName shadingName) {}
+}

app/common/src/main/java/stirling/software/SPDF/pdf/parser/PdfIngester.java

@@ -1,79 +0,0 @@
-package stirling.software.SPDF.pdf.parser;
-
-import static stirling.software.SPDF.pdf.parser.PdfModels.*;
-
-import java.io.IOException;
-import java.util.ArrayList;
-import java.util.List;
-
-import org.apache.pdfbox.pdmodel.PDDocument;
-import org.apache.pdfbox.pdmodel.PDPage;
-import org.apache.pdfbox.pdmodel.common.PDRectangle;
-import org.springframework.stereotype.Service;
-
-import lombok.RequiredArgsConstructor;
-import lombok.extern.slf4j.Slf4j;
-
-/**
- * Runs the per-page ingestion pipeline: {@link WordExtractingStripper} → {@link LineBuilder} →
- * {@link TableParser}, producing a {@link PdfModels.ParsedPage} per page. The caller owns the
- * {@link PDDocument} lifecycle.
- */
-@Service
-@RequiredArgsConstructor
-@Slf4j
-public class PdfIngester {
-
-    private final LineBuilder lineBuilder;
-    private final TableParser tableParser;
-
-    public List<ParsedPage> parse(PDDocument document) throws IOException {
-        return parse(document, document.getNumberOfPages());
-    }
-
-    public List<ParsedPage> parse(PDDocument document, int maxPages) throws IOException {
-        int pageCount = Math.min(document.getNumberOfPages(), maxPages);
-        List<ParsedPage> pages = new ArrayList<>(pageCount);
-        long fragmentsMs = 0;
-        long tablesMs = 0;
-        long t0 = System.currentTimeMillis();
-
-        for (int p = 1; p <= pageCount; p++) {
-            long ft = System.currentTimeMillis();
-            List<TextFragment> fragments = extractFragments(document, p);
-            fragmentsMs += System.currentTimeMillis() - ft;
-
-            PDPage page = document.getPage(p - 1);
-            PDRectangle mediaBox = page.getMediaBox();
-            List<RawLine> lines = lineBuilder.build(fragments, p);
-            RawPage rawPage = new RawPage(p, mediaBox.getWidth(), mediaBox.getHeight(), lines);
-
-            long tt = System.currentTimeMillis();
-            List<TableFragment> tables = tableParser.parse(document, rawPage);
-            tablesMs += System.currentTimeMillis() - tt;
-
-            log.debug(
-                    "Page {}: {} fragments → {} lines, {} table(s)",
-                    p,
-                    fragments.size(),
-                    lines.size(),
-                    tables.size());
-            pages.add(new ParsedPage(p, mediaBox.getWidth(), mediaBox.getHeight(), tables, lines));
-        }
-
-        log.info(
-                "[timing] parse pages={} total={}ms fragments={}ms tables={}ms",
-                pageCount,
-                System.currentTimeMillis() - t0,
-                fragmentsMs,
-                tablesMs);
-        return pages;
-    }
-
-    private List<TextFragment> extractFragments(PDDocument document, int pageNumber)
-            throws IOException {
-        WordExtractingStripper stripper = new WordExtractingStripper(pageNumber);
-        stripper.getText(document);
-        return stripper.getFragments();
-    }
-}

app/common/src/main/java/stirling/software/SPDF/pdf/parser/WordExtractingStripper.java

@@ -1,113 +0,0 @@
-package stirling.software.SPDF.pdf.parser;
-
-import static stirling.software.SPDF.pdf.parser.PdfModels.*;
-
-import java.io.IOException;
-import java.util.ArrayList;
-import java.util.Collections;
-import java.util.List;
-
-import org.apache.pdfbox.pdmodel.PDPage;
-import org.apache.pdfbox.pdmodel.font.PDFont;
-import org.apache.pdfbox.text.PDFTextStripper;
-import org.apache.pdfbox.text.TextPosition;
-
-/**
- * Extends {@link PDFTextStripper} to capture per-fragment geometry and font metadata.
- *
- * <p>Overrides {@link #writeString} to split each content-stream string into word-level {@link
- * TextFragment}s with bounding boxes, baseline, font name, and bold flag. Coordinates are in
- * PDFTextStripper space: (0,0) top-left, Y increases downward, {@code getY()} is the baseline.
- */
-class WordExtractingStripper extends PDFTextStripper {
-
-    private final int targetPage;
-    private final List<TextFragment> fragments = new ArrayList<>();
-    private int fragmentIndex = 0;
-
-    WordExtractingStripper(int pageNumber) throws IOException {
-        this.targetPage = pageNumber;
-        setStartPage(pageNumber);
-        setEndPage(pageNumber);
-        setSortByPosition(true);
-    }
-
-    @Override
-    protected void startPage(PDPage page) throws IOException {
-        super.startPage(page);
-        fragments.clear();
-        fragmentIndex = 0;
-    }
-
-    @Override
-    protected void writeString(String text, List<TextPosition> textPositions) throws IOException {
-        if (text == null || text.isBlank()) return;
-
-        // Fast path: no whitespace → emit one fragment (most financial PDFs have each
-        // number as its own string operation, so this is the common case).
-        if (text.indexOf(' ') < 0) {
-            emitFragment(text, textPositions);
-            return;
-        }
-
-        // Per-word splitting requires 1:1 text-char to TextPosition correspondence.
-        // Fall back to one fragment when sizes differ (ligatures, encoding edge cases).
-        if (textPositions.size() != text.length()) {
-            emitFragment(text, textPositions);
-            return;
-        }
-
-        // Emit one TextFragment per whitespace-delimited word with accurate per-word bounds.
-        int start = 0;
-        for (int i = 0; i <= text.length(); i++) {
-            if (i == text.length() || text.charAt(i) == ' ') {
-                if (start < i) {
-                    emitFragment(text.substring(start, i), textPositions.subList(start, i));
-                }
-                start = i + 1;
-            }
-        }
-    }
-
-    private void emitFragment(String text, List<TextPosition> positions) {
-        if (positions.isEmpty()) return;
-
-        float minX = Float.MAX_VALUE;
-        float minY = Float.MAX_VALUE;
-        float maxRight = -Float.MAX_VALUE;
-        float maxBaseline = -Float.MAX_VALUE;
-        TextPosition first = null;
-
-        for (TextPosition tp : positions) {
-            if (tp == null) continue;
-            if (first == null) first = tp;
-
-            float x = tp.getX();
-            // getY() is the baseline; top of character = getY() - getHeight().
-            float top = tp.getY() - tp.getHeight();
-            float right = x + tp.getWidth();
-            float baseline = tp.getY();
-
-            minX = Math.min(minX, x);
-            minY = Math.min(minY, top);
-            maxRight = Math.max(maxRight, right);
-            maxBaseline = Math.max(maxBaseline, baseline);
-        }
-
-        if (first == null) return;
-
-        PDFont font = first.getFont();
-        String fontName = font != null ? font.getName() : "";
-        boolean bold = fontName != null && fontName.toLowerCase().contains("bold");
-        // getHeight() gives the rendered glyph height, which is the most reliable visual size.
-        float fontSize = first.getHeight();
-
-        Bounds bounds = new Bounds(minX, minY, maxRight - minX, maxBaseline - minY);
-        String id = "tf-p" + targetPage + "-" + fragmentIndex++;
-        fragments.add(new TextFragment(id, text, bounds, maxBaseline, fontSize, fontName, bold));
-    }
-
-    List<TextFragment> getFragments() {
-        return Collections.unmodifiableList(fragments);
-    }
-}

app/common/src/main/java/stirling/software/common/annotations/AutoJobPostMapping.java

@@ -77,6 +77,10 @@ public @interface AutoJobPostMapping {
     /**
      * Relative resource weight (1-100). See {@link
      * stirling.software.common.enumeration.ResourceWeight} for the standard tiers.
+     *
+     * <p>The default is a sentinel ({@link Integer#MIN_VALUE}); {@code
+     * AutoJobPostMappingWeightTest} fails the build if any endpoint leaves it unset. Runtime
+     * readers clamp the value into {@code [1, 100]}.
      */
-    int resourceWeight() default 1;
+    int resourceWeight() default Integer.MIN_VALUE;
 }

app/common/src/main/java/stirling/software/common/cluster/FileStore.java

@@ -11,23 +11,39 @@ public interface FileStore {
     /** Stored file record. */
     record Stored(String fileId, long size) {}
 
-    /** Store the given stream and return a generated file id and total bytes written. */
-    Stored store(InputStream in, String originalName) throws IOException;
+    /**
+     * Store the given stream and return a generated file id and total bytes written. {@code owner}
+     * may be null to indicate the file has no associated user (anonymous / desktop / async job with
+     * no propagated security context); a non-null value is persisted alongside the data so {@link
+     * #getOwner(String)} can return it later for authorization checks.
+     */
+    Stored store(InputStream in, String originalName, String owner) throws IOException;
+
+    /** Store with no owner. Equivalent to {@link #store(InputStream, String, String)} with null. */
+    default Stored store(InputStream in, String originalName) throws IOException {
+        return store(in, originalName, null);
+    }
 
     /**
      * Store the file at {@code source} and return a generated file id and total bytes written.
      *
      * <p>Default implementation opens {@code source} as a stream and delegates to {@link
-     * #store(InputStream, String)}. Local-disk implementations should override to use a direct
-     * file-to-file copy ({@code Files.copy(source, dest)} can use {@code sendfile(2)} on Linux),
-     * which avoids the two-memory-copy hit of streaming a disk-backed upload through the JVM heap.
+     * #store(InputStream, String, String)}. Local-disk implementations should override to use a
+     * direct file-to-file copy ({@code Files.copy(source, dest)} can use {@code sendfile(2)} on
+     * Linux), which avoids the two-memory-copy hit of streaming a disk-backed upload through the
+     * JVM heap.
      */
-    default Stored store(Path source, String originalName) throws IOException {
+    default Stored store(Path source, String originalName, String owner) throws IOException {
         try (InputStream in = Files.newInputStream(source)) {
-            return store(in, originalName);
+            return store(in, originalName, owner);
         }
     }
 
+    /** Store with no owner. Equivalent to {@link #store(Path, String, String)} with null. */
+    default Stored store(Path source, String originalName) throws IOException {
+        return store(source, originalName, null);
+    }
+
     /** Open the stored file for streaming reads. Caller closes. */
     InputStream retrieve(String fileId) throws IOException;
 
@@ -42,4 +58,12 @@ public interface FileStore {
 
     /** Whether the file id exists in the store. */
     boolean exists(String fileId);
+
+    /**
+     * Returns the owner identifier recorded at store time, or {@code null} if the file does not
+     * exist or was stored without an owner. Implementations must not throw when the file is missing
+     * or when the owner record is absent; they should return null so callers can treat "no owner"
+     * as a non-authoritative case.
+     */
+    String getOwner(String fileId) throws IOException;
 }

app/common/src/main/java/stirling/software/common/cluster/RateLimitStore.java

@@ -2,7 +2,13 @@ package stirling.software.common.cluster;
 
 import java.time.Duration;
 
-/** Token-bucket rate limiting backed by the cluster backplane. */
+/**
+ * Token-bucket rate limiting backed by the cluster backplane.
+ *
+ * <p>In-process implementations enforce a per-JVM limit; distributed implementations enforce a
+ * single global limit across every node. Both use a Bucket4j greedy-refill token bucket so the
+ * semantics match across single-node and cluster deployments.
+ */
 public interface RateLimitStore {
 
     /**

app/common/src/main/java/stirling/software/common/cluster/inprocess/LocalDiskFileStore.java

@@ -3,9 +3,12 @@ package stirling.software.common.cluster.inprocess;
 import java.io.BufferedInputStream;
 import java.io.IOException;
 import java.io.InputStream;
+import java.nio.charset.StandardCharsets;
 import java.nio.file.Files;
 import java.nio.file.Path;
 import java.util.UUID;
+import java.util.concurrent.locks.ReentrantLock;
+import java.util.regex.Pattern;
 
 import lombok.extern.slf4j.Slf4j;
 
@@ -15,33 +18,47 @@ import stirling.software.common.cluster.FileStore;
 @Slf4j
 public class LocalDiskFileStore implements FileStore {
 
+    private static final String OWNER_SUFFIX = ".owner";
+
+    // File ids are generated as random UUIDs; reject anything else so a tainted id can never reach
+    // Files.* APIs (defence in depth on top of the resolve() prefix check, and silences CodeQL's
+    // path-injection finding on the resolveOwner sidecar lookup).
+    private static final Pattern UUID_PATTERN =
+            Pattern.compile(
+                    "^[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}$");
+
     private final String baseDirPath;
+    // Fixed-size lock stripes so concurrent store/delete on the same (or colliding) fileId
+    // serialise the data-file + owner-sidecar pair as one critical section. Striped (not
+    // per-id) so the map never has to be cleaned up; collisions across unrelated ids are
+    // harmless contention.
+    private static final int LOCK_STRIPES = 64;
+    private final ReentrantLock[] stripes = new ReentrantLock[LOCK_STRIPES];
 
     public LocalDiskFileStore(String baseDirPath) {
         this.baseDirPath = baseDirPath;
+        for (int i = 0; i < LOCK_STRIPES; i++) {
+            stripes[i] = new ReentrantLock();
+        }
     }
 
     @Override
-    public Stored store(InputStream in, String originalName) throws IOException {
+    public Stored store(InputStream in, String originalName, String owner) throws IOException {
         String fileId = UUID.randomUUID().toString();
         Path filePath = resolve(fileId);
         Files.createDirectories(filePath.getParent());
+        ReentrantLock lock = acquire(fileId);
         boolean success = false;
         try {
             long size = Files.copy(in, filePath);
+            writeOwner(fileId, owner);
             success = true;
             return new Stored(fileId, size);
         } finally {
             if (!success) {
-                try {
-                    Files.deleteIfExists(filePath);
-                } catch (IOException cleanupEx) {
-                    log.warn(
-                            "Failed to clean up partial file {} after store failure",
-                            filePath,
-                            cleanupEx);
-                }
+                cleanupAfterFailedStore(fileId, filePath);
             }
+            release(fileId, lock);
         }
     }
 
@@ -52,27 +69,44 @@ public class LocalDiskFileStore implements FileStore {
      * the source size before copying so the post-copy stat is unnecessary.
      */
     @Override
-    public Stored store(Path source, String originalName) throws IOException {
+    public Stored store(Path source, String originalName, String owner) throws IOException {
         String fileId = UUID.randomUUID().toString();
         Path filePath = resolve(fileId);
         Files.createDirectories(filePath.getParent());
         long size = Files.size(source);
+        ReentrantLock lock = acquire(fileId);
         boolean success = false;
         try {
             Files.copy(source, filePath);
+            writeOwner(fileId, owner);
             success = true;
             return new Stored(fileId, size);
         } finally {
             if (!success) {
-                try {
-                    Files.deleteIfExists(filePath);
-                } catch (IOException cleanupEx) {
-                    log.warn(
-                            "Failed to clean up partial file {} after store failure",
-                            filePath,
-                            cleanupEx);
-                }
+                cleanupAfterFailedStore(fileId, filePath);
             }
+            release(fileId, lock);
+        }
+    }
+
+    private void writeOwner(String fileId, String owner) throws IOException {
+        if (owner == null || owner.isBlank()) {
+            return;
+        }
+        Path ownerPath = resolveOwner(fileId);
+        Files.write(ownerPath, owner.getBytes(StandardCharsets.UTF_8));
+    }
+
+    private void cleanupAfterFailedStore(String fileId, Path filePath) {
+        try {
+            Files.deleteIfExists(filePath);
+        } catch (IOException cleanupEx) {
+            log.warn("Failed to clean up partial file {} after store failure", filePath, cleanupEx);
+        }
+        try {
+            Files.deleteIfExists(resolveOwner(fileId));
+        } catch (IOException cleanupEx) {
+            log.warn("Failed to clean up owner sidecar for {} after store failure", fileId);
         }
     }
 
@@ -101,11 +135,26 @@ public class LocalDiskFileStore implements FileStore {
 
     @Override
     public boolean delete(String fileId) {
+        ReentrantLock lock = acquire(fileId);
         try {
-            return Files.deleteIfExists(resolve(fileId));
-        } catch (IOException e) {
-            log.error("Error deleting file with ID: {}", fileId, e);
-            return false;
+            // Data first, owner second: a concurrent retrieve that observes the transient
+            // (data-gone, owner-still-present) window simply fails with IOException; the inverse
+            // order would briefly look like an unowned file and could grant cross-user access.
+            boolean removed;
+            try {
+                removed = Files.deleteIfExists(resolve(fileId));
+            } catch (IOException e) {
+                log.error("Error deleting file with ID: {}", fileId, e);
+                return false;
+            }
+            try {
+                Files.deleteIfExists(resolveOwner(fileId));
+            } catch (IOException e) {
+                log.warn("Error deleting owner sidecar for file ID: {}", fileId, e);
+            }
+            return removed;
+        } finally {
+            release(fileId, lock);
         }
     }
 
@@ -114,8 +163,21 @@ public class LocalDiskFileStore implements FileStore {
         return Files.exists(resolve(fileId));
     }
 
+    @Override
+    public String getOwner(String fileId) throws IOException {
+        Path ownerPath = resolveOwner(fileId);
+        if (!Files.exists(ownerPath)) {
+            return null;
+        }
+        byte[] bytes = Files.readAllBytes(ownerPath);
+        if (bytes.length == 0) {
+            return null;
+        }
+        return new String(bytes, StandardCharsets.UTF_8);
+    }
+
     public Path resolve(String fileId) {
-        if (fileId.contains("..") || fileId.contains("/") || fileId.contains("\\")) {
+        if (fileId == null || !UUID_PATTERN.matcher(fileId).matches()) {
             throw new IllegalArgumentException("Invalid file ID");
         }
         Path basePath = Path.of(baseDirPath).normalize().toAbsolutePath();
@@ -125,4 +187,19 @@ public class LocalDiskFileStore implements FileStore {
         }
         return resolvedPath;
     }
+
+    private Path resolveOwner(String fileId) {
+        Path data = resolve(fileId);
+        return data.resolveSibling(data.getFileName().toString() + OWNER_SUFFIX);
+    }
+
+    private ReentrantLock acquire(String fileId) {
+        ReentrantLock lock = stripes[(fileId.hashCode() & Integer.MAX_VALUE) % LOCK_STRIPES];
+        lock.lock();
+        return lock;
+    }
+
+    private void release(String fileId, ReentrantLock lock) {
+        lock.unlock();
+    }
 }

app/common/src/main/java/stirling/software/common/configuration/AppConfig.java

@@ -3,7 +3,6 @@ package stirling.software.common.configuration;
 import java.io.IOException;
 import java.nio.file.Files;
 import java.nio.file.Path;
-import java.nio.file.Paths;
 import java.util.List;
 import java.util.Locale;
 import java.util.Properties;
@@ -122,17 +121,17 @@ public class AppConfig {
 
     @Bean(name = "RunningInDocker")
     public boolean runningInDocker() {
-        return Files.exists(Paths.get("/.dockerenv"));
+        return Files.exists(Path.of("/.dockerenv"));
     }
 
     @Bean(name = "configDirMounted")
     public boolean isRunningInDockerWithConfig() {
-        Path dockerEnv = Paths.get("/.dockerenv");
+        Path dockerEnv = Path.of("/.dockerenv");
         // default to true if not docker
         if (!Files.exists(dockerEnv)) {
             return true;
         }
-        Path mountInfo = Paths.get("/proc/1/mountinfo");
+        Path mountInfo = Path.of("/proc/1/mountinfo");
         // this should always exist, if not some unknown usecase
         if (!Files.exists(mountInfo)) {
             return true;

app/common/src/main/java/stirling/software/common/configuration/ConfigInitializer.java

@@ -7,7 +7,6 @@ import java.net.URISyntaxException;
 import java.net.URL;
 import java.nio.file.Files;
 import java.nio.file.Path;
-import java.nio.file.Paths;
 import java.nio.file.StandardCopyOption;
 import java.util.List;
 
@@ -27,7 +26,7 @@ public class ConfigInitializer {
 
     public void ensureConfigExists() throws IOException, URISyntaxException {
         // 1) If settings file doesn't exist, create from template
-        Path destPath = Paths.get(InstallationPathConfig.getSettingsPath());
+        Path destPath = Path.of(InstallationPathConfig.getSettingsPath());
 
         boolean settingsFileExists = Files.exists(destPath);
 
@@ -39,7 +38,7 @@ public class ConfigInitializer {
             if (settingsFileExists) {
                 // move settings.yml to settings.yml.{timestamp}.bak
                 Path backupPath =
-                        Paths.get(
+                        Path.of(
                                 InstallationPathConfig.getSettingsPath()
                                         + "."
                                         + System.currentTimeMillis()
@@ -80,6 +79,7 @@ public class ConfigInitializer {
             YamlHelper settingsFile = new YamlHelper(settingTempPath);
 
             migrateEnterpriseEditionToPremium(settingsFile, settingsTemplateFile);
+            migrateProFeaturesKeyCasing(settingsFile, settingsTemplateFile);
 
             boolean changesMade =
                     settingsTemplateFile.updateValuesFromYaml(settingsFile, settingsTemplateFile);
@@ -95,7 +95,7 @@ public class ConfigInitializer {
         }
 
         // 3) Ensure custom settings file exists
-        Path customSettingsPath = Paths.get(InstallationPathConfig.getCustomSettingsPath());
+        Path customSettingsPath = Path.of(InstallationPathConfig.getCustomSettingsPath());
         if (Files.notExists(customSettingsPath)) {
             Files.createFile(customSettingsPath);
             log.info("Created custom_settings file: {}", customSettingsPath);
@@ -116,31 +116,52 @@ public class ConfigInitializer {
         }
         if (yaml.getValueByExactKeyPath("enterpriseEdition", "SSOAutoLogin") != null) {
             template.updateValue(
-                    List.of("premium", "proFeatures", "SSOAutoLogin"),
+                    List.of("premium", "proFeatures", "ssoAutoLogin"),
                     yaml.getValueByExactKeyPath("enterpriseEdition", "SSOAutoLogin"));
         }
         if (yaml.getValueByExactKeyPath("enterpriseEdition", "CustomMetadata", "autoUpdateMetadata")
                 != null) {
             template.updateValue(
-                    List.of("premium", "proFeatures", "CustomMetadata", "autoUpdateMetadata"),
+                    List.of("premium", "proFeatures", "customMetadata", "autoUpdateMetadata"),
                     yaml.getValueByExactKeyPath(
                             "enterpriseEdition", "CustomMetadata", "autoUpdateMetadata"));
         }
         if (yaml.getValueByExactKeyPath("enterpriseEdition", "CustomMetadata", "author") != null) {
             template.updateValue(
-                    List.of("premium", "proFeatures", "CustomMetadata", "author"),
+                    List.of("premium", "proFeatures", "customMetadata", "author"),
                     yaml.getValueByExactKeyPath("enterpriseEdition", "CustomMetadata", "author"));
         }
         if (yaml.getValueByExactKeyPath("enterpriseEdition", "CustomMetadata", "creator") != null) {
             template.updateValue(
-                    List.of("premium", "proFeatures", "CustomMetadata", "creator"),
+                    List.of("premium", "proFeatures", "customMetadata", "creator"),
                     yaml.getValueByExactKeyPath("enterpriseEdition", "CustomMetadata", "creator"));
         }
         if (yaml.getValueByExactKeyPath("enterpriseEdition", "CustomMetadata", "producer")
                 != null) {
             template.updateValue(
-                    List.of("premium", "proFeatures", "CustomMetadata", "producer"),
+                    List.of("premium", "proFeatures", "customMetadata", "producer"),
                     yaml.getValueByExactKeyPath("enterpriseEdition", "CustomMetadata", "producer"));
         }
     }
+
+    // TODO: Remove post migration
+    // settings.yml.template renamed the two non-camelCase proFeatures keys
+    // ("SSOAutoLogin" -> "ssoAutoLogin", "CustomMetadata" -> "customMetadata") so the whole
+    // settings pipeline is consistent camelCase. The save path (YamlHelper.updateValue) matches
+    // keys case-sensitively, so without this carry-forward an existing install's values written
+    // under the old PascalCase keys would be dropped on upgrade and reset to template defaults.
+    void migrateProFeaturesKeyCasing(YamlHelper yaml, YamlHelper template) {
+        Object ssoAutoLogin = yaml.getValueByExactKeyPath("premium", "proFeatures", "SSOAutoLogin");
+        if (ssoAutoLogin != null) {
+            template.updateValue(List.of("premium", "proFeatures", "ssoAutoLogin"), ssoAutoLogin);
+        }
+        for (String field : List.of("autoUpdateMetadata", "author", "creator", "producer")) {
+            Object value =
+                    yaml.getValueByExactKeyPath("premium", "proFeatures", "CustomMetadata", field);
+            if (value != null) {
+                template.updateValue(
+                        List.of("premium", "proFeatures", "customMetadata", field), value);
+            }
+        }
+    }
 }

app/common/src/main/java/stirling/software/common/configuration/RuntimePathConfig.java

@@ -3,7 +3,6 @@ package stirling.software.common.configuration;
 import java.nio.file.Files;
 import java.nio.file.InvalidPathException;
 import java.nio.file.Path;
-import java.nio.file.Paths;
 import java.util.ArrayList;
 import java.util.Collections;
 import java.util.LinkedHashSet;
@@ -201,7 +200,7 @@ public class RuntimePathConfig {
 
             try {
                 // Normalize to absolute path
-                Path path = Paths.get(pathStr.trim()).toAbsolutePath().normalize();
+                Path path = Path.of(pathStr.trim()).toAbsolutePath().normalize();
                 String normalizedPath = path.toString();
 
                 // Check for duplicates
@@ -224,9 +223,9 @@ public class RuntimePathConfig {
 
     private void detectOverlappingPaths(List<String> paths) {
         for (int i = 0; i < paths.size(); i++) {
-            Path path1 = Paths.get(paths.get(i));
+            Path path1 = Path.of(paths.get(i));
             for (int j = i + 1; j < paths.size(); j++) {
-                Path path2 = Paths.get(paths.get(j));
+                Path path2 = Path.of(paths.get(j));
 
                 // Check if one path is a parent of the other
                 if (path1.startsWith(path2)) {
@@ -246,10 +245,10 @@ public class RuntimePathConfig {
 
     private void validatePipelinePaths() {
         try {
-            Path finishedPath = Paths.get(pipelineFinishedFoldersPath).toAbsolutePath().normalize();
+            Path finishedPath = Path.of(pipelineFinishedFoldersPath).toAbsolutePath().normalize();
 
             for (String watchedPathStr : pipelineWatchedFoldersPaths) {
-                Path watchedPath = Paths.get(watchedPathStr).toAbsolutePath().normalize();
+                Path watchedPath = Path.of(watchedPathStr).toAbsolutePath().normalize();
 
                 // Check if watched folder is same as finished folder
                 if (watchedPath.equals(finishedPath)) {

app/common/src/main/java/stirling/software/common/model/ApplicationProperties.java

@@ -77,8 +77,10 @@ public class ApplicationProperties {
     private ProcessExecutor processExecutor = new ProcessExecutor();
     private PdfEditor pdfEditor = new PdfEditor();
     private AiEngine aiEngine = new AiEngine();
+    private Mcp mcp = new Mcp();
     private InternalApi internalApi = new InternalApi();
     private Cluster cluster = new Cluster();
+    private Policies policies = new Policies();
 
     @Bean
     public PropertySource<?> dynamicYamlPropertySource(ConfigurableEnvironment environment)
@@ -202,6 +204,45 @@ public class ApplicationProperties {
         }
     }
 
+    @Data
+    public static class Policies {
+        /**
+         * Absolute directories that policy folder input sources and output sinks may read from or
+         * write to. Empty (the default) disables folder access entirely, so a policy can never be
+         * pointed at an arbitrary server path. Stirling's own config directory is always
+         * off-limits, and folder access is always disabled in SaaS mode regardless of this list.
+         */
+        private List<String> allowedFolderRoots = new java.util.ArrayList<>();
+
+        /** How often (seconds) the schedule trigger checks for policies whose schedule is due. */
+        private long scheduleSweepSeconds = 60;
+
+        /**
+         * How often (seconds) the folder-watch trigger reconciles its watch registrations and
+         * re-runs every folder-watch policy as a safety net for filesystem events that were missed
+         * (NFS, bind mounts, inotify-queue overflow).
+         */
+        private long watchReconcileSeconds = 300;
+
+        /**
+         * How long (milliseconds) the folder-watch trigger keeps draining filesystem events after
+         * the first, so a burst from a single file copy coalesces into one run instead of many.
+         */
+        private long watchQuietPeriodMs = 500;
+
+        /**
+         * SSE emitter timeout (milliseconds) for streamed runs; generous for long multi-step runs.
+         */
+        private long streamTimeoutMs = 1800000;
+
+        /**
+         * How long (minutes) a finished run's in-memory state is retained before eviction,
+         * mirroring the job-result expiry so rich run state does not outlive the process. Active
+         * and paused runs are kept regardless of age.
+         */
+        private int runExpiryMinutes = 30;
+    }
+
     @Data
     public static class PdfEditor {
         private Cache cache = new Cache();
@@ -256,6 +297,103 @@ public class ApplicationProperties {
         private int longRunningTimeoutSeconds = 600;
     }
 
+    /**
+     * Model Context Protocol (MCP) server configuration. All keys live under the top-level {@code
+     * mcp.*} prefix. {@link #enabled} defaults to {@code false}: when off, no MCP beans are wired,
+     * no /mcp endpoint exists, and no protected-resource metadata is published.
+     */
+    @Data
+    public static class Mcp {
+
+        /** Master switch. When {@code false} (default), no MCP beans are wired. */
+        private boolean enabled = false;
+
+        /**
+         * When {@code true} (default), invocations require an OAuth scope: {@code mcp.tools.read}
+         * for read-style operations and {@code mcp.tools.write} for write/destructive ones. When
+         * {@code false}, scope checks are skipped (use only if your IdP issues a single coarse
+         * scope).
+         */
+        private boolean scopesEnabled = true;
+
+        /** How often to refresh the AI capabilities manifest from the engine. */
+        private int engineCapabilityRefreshMinutes = 5;
+
+        /**
+         * Tool allow-list (operation ids, e.g. {@code compress-pdf}). When non-empty, ONLY these
+         * operations are exposed over MCP; everything else is hidden, undescribable, and
+         * uninvocable - on top of the global endpoint enable/disable config. Empty = allow all.
+         */
+        private List<String> allowedOperations = new ArrayList<>();
+
+        /**
+         * Tool deny-list (operation ids). Any operation listed here is removed from MCP even if it
+         * would otherwise be allowed. Applied after {@link #allowedOperations}.
+         */
+        private List<String> blockedOperations = new ArrayList<>();
+
+        /** Max MCP request body size in bytes; inline file uploads ride in the JSON-RPC body. */
+        private long maxRequestBytes = 10L * 1024 * 1024;
+
+        /** Results up to this size return inline as base64; larger ones return a fileId only. */
+        private long maxInlineResponseBytes = 10L * 1024 * 1024;
+
+        private Auth auth = new Auth();
+
+        @Data
+        public static class Auth {
+            /**
+             * Authentication mode for the MCP endpoint. {@code oauth} (default) runs a full OAuth2
+             * resource server (JWT, RFC 8707 audience, RFC 9728 metadata). {@code apikey} accepts a
+             * Stirling per-user API key via the {@code X-API-KEY} header (or {@code Authorization:
+             * Bearer <key>}) and binds the request to that user - the low-friction self-host path,
+             * no external IdP required.
+             */
+            private String mode = "oauth";
+
+            /** OAuth2 issuer URI, e.g. {@code http://localhost:9000}. Required when MCP is on. */
+            private String issuerUri = "";
+
+            /**
+             * JWKS URI. When blank, derived from the issuer's {@code
+             * /.well-known/openid-configuration} document.
+             */
+            private String jwksUri = "";
+
+            /**
+             * RFC 8707 resource identifier of THIS MCP server, e.g. {@code
+             * http://localhost:8080/mcp}. Tokens that do not list this id in their {@code aud}
+             * claim are rejected with HTTP 401.
+             */
+            private String resourceId = "";
+
+            /**
+             * Additional JWT audiences accepted at the MCP endpoint, on top of {@link #resourceId}.
+             * Empty (default) keeps strict RFC 8707 binding. Some IdPs cannot mint
+             * resource-specific audiences - e.g. Supabase's OAuth server always issues {@code
+             * aud=authenticated} - so operators list the audience their IdP actually emits here
+             * (env: {@code MCP_AUTH_ACCEPTEDAUDIENCES}, comma-separated).
+             */
+            private List<String> acceptedAudiences = new ArrayList<>();
+
+            /**
+             * JWT claim whose value is matched against a provisioned Stirling username. Defaults to
+             * {@code sub}; set to {@code email} or {@code preferred_username} to match how your IdP
+             * maps users to Stirling accounts.
+             */
+            private String usernameClaim = "sub";
+
+            /**
+             * When {@code true} (default), a validated token is accepted only if its {@link
+             * #usernameClaim} value resolves to an existing, enabled Stirling user account. Tokens
+             * whose subject has no Stirling account (or a disabled one) are rejected with HTTP 403.
+             * Set to {@code false} only if you intentionally want any IdP-valid token to use MCP
+             * without a local account.
+             */
+            private boolean requireExistingAccount = true;
+        }
+    }
+
     /**
      * Cluster backplane configuration. All keys live under the top-level {@code cluster.*} prefix
      * (e.g. env var {@code CLUSTER_ENABLED}). The master switch is {@link #enabled} and defaults to
@@ -867,6 +1005,10 @@ public class ApplicationProperties {
         @Data
         public static class Signing {
             private boolean enabled = false;
+
+            // Signing user-picker scope: 'org' (default) = whole instance, anything else =
+            // caller's team only (fail-closed). The saas profile pins 'team'.
+            private String userListScope = "org";
         }
     }
 

app/common/src/main/java/stirling/software/common/model/FileInfo.java

@@ -1,7 +1,6 @@
 package stirling.software.common.model;
 
 import java.nio.file.Path;
-import java.nio.file.Paths;
 import java.time.LocalDateTime;
 import java.time.format.DateTimeFormatter;
 import java.util.Locale;
@@ -24,7 +23,7 @@ public class FileInfo {
 
     // Converts the file path string to a Path object.
     public Path getFilePathAsPath() {
-        return Paths.get(filePath);
+        return Path.of(filePath);
     }
 
     // Formats the file size into a human-readable string.

app/common/src/main/java/stirling/software/common/pdf/HeadingDetector.java

@@ -0,0 +1,191 @@
+package stirling.software.common.pdf;
+
+import java.util.ArrayList;
+import java.util.Collections;
+import java.util.HashMap;
+import java.util.List;
+import java.util.Map;
+
+import stirling.software.jpdfium.text.PageText;
+import stirling.software.jpdfium.text.TextChar;
+import stirling.software.jpdfium.text.TextLine;
+import stirling.software.jpdfium.text.TextWord;
+
+final class HeadingDetector {
+
+    private HeadingDetector() {}
+
+    /** A heading is at most this many words; longer lines are treated as body text. */
+    private static final int MAX_HEADING_WORDS = 12;
+
+    /**
+     * Returns the Markdown heading prefix for a line. The decision combines several signals, never
+     * text matching, so a plain line that merely shares text with a heading is never promoted:
+     *
+     * <ul>
+     *   <li><b>Size</b> — dominant glyph font size vs. the document body median (primary signal).
+     *       Some PDFs encode visual size in the text matrix, so every glyph reports ~1.0; for those
+     *       the line height is used as the proxy instead.
+     *   <li><b>Brevity</b> — headings are short labels; a line over {@value #MAX_HEADING_WORDS}
+     *       words is body text regardless of size.
+     *   <li><b>Not a sentence</b> — a line ending in {@code . ! ?} reads as prose, not a heading.
+     * </ul>
+     *
+     * <p>Boldness is deliberately <em>not</em> a heading signal — a bold-but-not-larger line is
+     * emphasis, not a heading (see {@link #isBoldLabel}); promoting it to {@code #}/{@code ##} is
+     * the main source of false-positive headings.
+     *
+     * <ul>
+     *   <li>size &gt; baseline * 1.4 → {@code "# "}
+     *   <li>size &gt; baseline * 1.2 → {@code "## "}
+     *   <li>otherwise → {@code ""}
+     * </ul>
+     */
+    static String headingPrefix(TextLine line, float medianBodySize, float medianBodyHeight) {
+        String text = line.text().strip();
+        if (text.isEmpty() || wordCount(text) > MAX_HEADING_WORDS || endsLikeSentence(text)) {
+            return "";
+        }
+
+        float dominant = dominantFontSize(line);
+        float value;
+        float baseline;
+        if (dominant > 2f && medianBodySize > 2f) {
+            value = dominant;
+            baseline = medianBodySize;
+        } else {
+            value = line.height();
+            baseline = medianBodyHeight;
+        }
+        if (baseline <= 0f) {
+            return "";
+        }
+
+        float ratio = value / baseline;
+        if (ratio > 1.4f) {
+            return "# ";
+        }
+        if (ratio > 1.2f) {
+            return "## ";
+        }
+        return "";
+    }
+
+    /**
+     * True when a line should be emphasised as bold (rendered {@code **like this**}) rather than
+     * promoted to a heading: it is bold, short, and not a full sentence. Used for bold labels that
+     * are not large enough to be headings.
+     */
+    static boolean isBoldLabel(TextLine line) {
+        String text = line.text().strip();
+        if (text.isEmpty() || wordCount(text) > MAX_HEADING_WORDS || endsLikeSentence(text)) {
+            return false;
+        }
+        return isBold(line);
+    }
+
+    private static int wordCount(String text) {
+        return text.split("\\s+").length;
+    }
+
+    private static boolean endsLikeSentence(String text) {
+        char last = text.charAt(text.length() - 1);
+        return last == '.' || last == '!' || last == '?';
+    }
+
+    /** True when the line's dominant font is bold, inferred from PostScript font names. */
+    private static boolean isBold(TextLine line) {
+        Map<String, Integer> counts = new HashMap<>();
+        for (TextWord word : line.words()) {
+            for (TextChar ch : word.chars()) {
+                if (ch.isWhitespace() || ch.isNewline()) {
+                    continue;
+                }
+                String name = ch.fontName();
+                if (name != null && !name.isBlank()) {
+                    counts.merge(name, 1, Integer::sum);
+                }
+            }
+        }
+        String dominantFont = "";
+        int max = -1;
+        for (Map.Entry<String, Integer> e : counts.entrySet()) {
+            if (e.getValue() > max) {
+                max = e.getValue();
+                dominantFont = e.getKey();
+            }
+        }
+        String lower = dominantFont.toLowerCase(java.util.Locale.ROOT);
+        return lower.contains("bold")
+                || lower.contains("black")
+                || lower.contains("heavy")
+                || lower.contains("semibold");
+    }
+
+    /** Computes the median glyph font size across all pages. */
+    static float medianFontSize(List<PageText> allPages) {
+        List<Float> sizes = new ArrayList<>();
+        for (PageText page : allPages) {
+            for (TextChar ch : page.chars()) {
+                if (!ch.isWhitespace() && !ch.isNewline() && ch.fontSize() > 0f) {
+                    sizes.add(ch.fontSize());
+                }
+            }
+        }
+        return median(sizes, 12f);
+    }
+
+    /** Computes the median TextLine height across all pages. Used when font size is degenerate. */
+    static float medianLineHeight(List<PageText> allPages) {
+        List<Float> heights = new ArrayList<>();
+        for (PageText page : allPages) {
+            for (TextLine line : page.lines()) {
+                if (line.height() > 0f && !line.text().isBlank()) {
+                    heights.add(line.height());
+                }
+            }
+        }
+        return median(heights, 12f);
+    }
+
+    private static float median(List<Float> values, float fallback) {
+        if (values.isEmpty()) {
+            return fallback;
+        }
+        Collections.sort(values);
+        int mid = values.size() / 2;
+        if (values.size() % 2 == 0) {
+            return (values.get(mid - 1) + values.get(mid)) / 2f;
+        }
+        return values.get(mid);
+    }
+
+    /**
+     * Returns the font size that appears most often (by character count) in the given line. Ties
+     * are broken in favour of the larger size.
+     */
+    private static float dominantFontSize(TextLine line) {
+        Map<Float, Integer> counts = new HashMap<>();
+        for (TextWord word : line.words()) {
+            for (TextChar ch : word.chars()) {
+                if (!ch.isWhitespace() && !ch.isNewline() && ch.fontSize() > 0f) {
+                    counts.merge(ch.fontSize(), 1, Integer::sum);
+                }
+            }
+        }
+        if (counts.isEmpty()) {
+            return 0f;
+        }
+        float dominant = 0f;
+        int maxCount = -1;
+        for (Map.Entry<Float, Integer> entry : counts.entrySet()) {
+            int count = entry.getValue();
+            float size = entry.getKey();
+            if (count > maxCount || (count == maxCount && size > dominant)) {
+                maxCount = count;
+                dominant = size;
+            }
+        }
+        return dominant;
+    }
+}

app/common/src/main/java/stirling/software/common/pdf/TableRenderer.java

@@ -0,0 +1,82 @@
+package stirling.software.common.pdf;
+
+import stirling.software.jpdfium.text.Table;
+
+final class TableRenderer {
+    private TableRenderer() {}
+
+    /** Renders a Table as a GitHub-Flavoured Markdown table string. */
+    static String render(Table table) {
+        if (table.rowCount() == 0) {
+            return "";
+        }
+
+        String[][] grid = table.asGrid();
+
+        if (table.rowCount() < 2) {
+            // No separator row possible — return plain lines
+            StringBuilder sb = new StringBuilder();
+            for (int c = 0; c < grid[0].length; c++) {
+                if (c > 0) sb.append('\n');
+                sb.append(escape(grid[0][c].trim()));
+            }
+            return sb.toString();
+        }
+
+        int cols = grid[0].length;
+
+        // Compute column widths: max(3, max content length across all rows)
+        int[] widths = new int[cols];
+        for (int c = 0; c < cols; c++) {
+            widths[c] = 3;
+        }
+        for (String[] row : grid) {
+            for (int c = 0; c < cols; c++) {
+                String cell = c < row.length ? row[c].trim() : "";
+                widths[c] = Math.max(widths[c], escape(cell).length());
+            }
+        }
+
+        StringBuilder sb = new StringBuilder();
+
+        // Header row
+        sb.append(buildRow(grid[0], widths, cols));
+        sb.append('\n');
+
+        // Separator row
+        sb.append('|');
+        for (int c = 0; c < cols; c++) {
+            sb.append('-').append("-".repeat(widths[c])).append('-').append('|');
+        }
+        sb.append('\n');
+
+        // Data rows
+        for (int r = 1; r < grid.length; r++) {
+            sb.append(buildRow(grid[r], widths, cols));
+            if (r < grid.length - 1) {
+                sb.append('\n');
+            }
+        }
+
+        return sb.toString();
+    }
+
+    private static String buildRow(String[] row, int[] widths, int cols) {
+        StringBuilder sb = new StringBuilder();
+        sb.append('|');
+        for (int c = 0; c < cols; c++) {
+            String cell = c < row.length ? escape(row[c].trim()) : "";
+            sb.append(' ').append(padRight(cell, widths[c])).append(' ').append('|');
+        }
+        return sb.toString();
+    }
+
+    private static String escape(String cell) {
+        return cell.replace("|", "\\|");
+    }
+
+    private static String padRight(String s, int width) {
+        if (s.length() >= width) return s;
+        return s + " ".repeat(width - s.length());
+    }
+}

app/common/src/main/java/stirling/software/common/service/FileStorage.java

@@ -5,6 +5,7 @@ import java.io.IOException;
 import java.io.InputStream;
 import java.io.PipedInputStream;
 import java.io.PipedOutputStream;
+import java.util.Optional;
 import java.util.concurrent.Executors;
 import java.util.concurrent.atomic.AtomicReference;
 
@@ -17,6 +18,7 @@ import lombok.RequiredArgsConstructor;
 import lombok.extern.slf4j.Slf4j;
 
 import stirling.software.common.cluster.FileStore;
+import stirling.software.common.util.JobContext;
 
 /**
  * Service for storing and retrieving files with unique file IDs. Used by the AutoJobPostMapping
@@ -32,8 +34,10 @@ public class FileStorage {
 
     private final FileOrUploadService fileOrUploadService;
     private final FileStore fileStore;
+    private final Optional<JobOwnershipService> jobOwnershipService;
 
     public String storeFile(MultipartFile file) throws IOException {
+        String owner = resolveOwner();
         // Fast path: when Spring buffered the multipart to disk (typical for large uploads), the
         // backing Resource exposes a real File. Hand the Path to the FileStore so it can do a
         // file-to-file copy (Linux sendfile, no copy through Java heap) rather than streaming
@@ -48,7 +52,7 @@ public class FileStorage {
         if (res != null && res.isFile()) {
             try {
                 FileStore.Stored stored =
-                        fileStore.store(res.getFile().toPath(), file.getOriginalFilename());
+                        fileStore.store(res.getFile().toPath(), file.getOriginalFilename(), owner);
                 log.debug("Stored file with ID: {} (fast path)", stored.fileId());
                 return stored.fileId();
             } catch (IOException ex) {
@@ -57,40 +61,45 @@ public class FileStorage {
             }
         }
         try (InputStream in = file.getInputStream()) {
-            FileStore.Stored stored = fileStore.store(in, file.getOriginalFilename());
+            FileStore.Stored stored = fileStore.store(in, file.getOriginalFilename(), owner);
             log.debug("Stored file with ID: {}", stored.fileId());
             return stored.fileId();
         }
     }
 
     public String storeBytes(byte[] bytes, String originalName) throws IOException {
-        FileStore.Stored stored = fileStore.store(new ByteArrayInputStream(bytes), originalName);
+        FileStore.Stored stored =
+                fileStore.store(new ByteArrayInputStream(bytes), originalName, resolveOwner());
         log.debug("Stored byte array with ID: {}", stored.fileId());
         return stored.fileId();
     }
 
     public MultipartFile retrieveFile(String fileId) throws IOException {
+        enforceOwnership(fileId);
         byte[] fileData = fileStore.retrieveBytes(fileId);
         return fileOrUploadService.toMockMultipartFile(fileId, fileData);
     }
 
     public byte[] retrieveBytes(String fileId) throws IOException {
+        enforceOwnership(fileId);
         return fileStore.retrieveBytes(fileId);
     }
 
     public InputStream retrieveInputStream(String fileId) throws IOException {
+        enforceOwnership(fileId);
         return fileStore.retrieve(fileId);
     }
 
     public StoredFile storeInputStream(InputStream inputStream, String originalName)
             throws IOException {
-        FileStore.Stored stored = fileStore.store(inputStream, originalName);
+        FileStore.Stored stored = fileStore.store(inputStream, originalName, resolveOwner());
         log.debug("Stored input stream with ID: {}", stored.fileId());
         return new StoredFile(stored.fileId(), stored.size());
     }
 
     public String storeFromStreamingBody(StreamingResponseBody body, String originalName)
             throws IOException {
+        String owner = resolveOwner();
         // Hold Throwable not IOException: an unchecked failure (NPE, IllegalState, OOM, etc.)
         // from the body writer would otherwise close the pipe with EOF and the consumer would
         // return a truncated file with no error surfaced to the caller.
@@ -115,7 +124,7 @@ public class FileStorage {
                                         }
                                     }
                                 });
-                FileStore.Stored stored = fileStore.store(in, originalName);
+                FileStore.Stored stored = fileStore.store(in, originalName, owner);
                 Throwable writerErr = bodyError.get();
                 if (writerErr != null) {
                     // Body failed mid-write: the FileStore persisted a truncated entry.
@@ -159,21 +168,62 @@ public class FileStorage {
 
     public String storeFromResource(Resource resource, String originalName) throws IOException {
         try (InputStream in = resource.getInputStream()) {
-            FileStore.Stored stored = fileStore.store(in, originalName);
+            FileStore.Stored stored = fileStore.store(in, originalName, resolveOwner());
             log.debug("Stored Resource with ID: {}", stored.fileId());
             return stored.fileId();
         }
     }
 
     public boolean deleteFile(String fileId) {
+        enforceOwnership(fileId);
         return fileStore.delete(fileId);
     }
 
     public boolean fileExists(String fileId) {
+        enforceOwnership(fileId);
         return fileStore.exists(fileId);
     }
 
     public long getFileSize(String fileId) throws IOException {
+        enforceOwnership(fileId);
         return fileStore.size(fileId);
     }
+
+    private String resolveOwner() {
+        String propagated = JobContext.getOwner();
+        if (propagated != null) {
+            return propagated;
+        }
+        return jobOwnershipService.flatMap(JobOwnershipService::getCurrentUserId).orElse(null);
+    }
+
+    private void enforceOwnership(String fileId) {
+        if (jobOwnershipService.isEmpty()) {
+            return;
+        }
+        Optional<String> currentUser = jobOwnershipService.get().getCurrentUserId();
+        if (currentUser.isEmpty()) {
+            return;
+        }
+        String owner;
+        try {
+            owner = fileStore.getOwner(fileId);
+        } catch (IOException e) {
+            log.warn("Failed to read owner for file {}: {}", fileId, e.getMessage());
+            throw new SecurityException(
+                    "Access denied: could not verify ownership of the requested file");
+        }
+        if (owner == null) {
+            return;
+        }
+        if (!owner.equals(currentUser.get())) {
+            log.warn(
+                    "Access denied: user {} attempted to access file {} owned by {}",
+                    currentUser.get(),
+                    fileId,
+                    owner);
+            throw new SecurityException(
+                    "Access denied: you do not have permission to access this file");
+        }
+    }
 }

app/common/src/main/java/stirling/software/common/service/InternalApiClient.java

@@ -50,6 +50,16 @@ public class InternalApiClient {
                     "^/api/v1/(general|misc|security|convert|filter)(/[A-Za-z0-9_-]+)+$"
                             + "|^/api/v1/ai/tools(/[A-Za-z0-9_-]+)+$");
 
+    /**
+     * Marker propagated on every internal sub-step dispatch so the saas PAYG interceptor classifies
+     * the call as {@code BillingCategory.AUTOMATION}. By construction every {@link
+     * InternalApiClient#post} caller is an automation surface (pipeline executor, AI workflow,
+     * policy runner) running a child tool inside a parent automation flow — see the saas {@code
+     * PaygChargeInterceptor.determineCategory} precedence chain, where this header dominates any
+     * per-tool {@code @RequiresFeature} annotation.
+     */
+    public static final String AUTOMATION_HEADER = "X-Stirling-Automation";
+
     private final ServletContext servletContext;
     private final UserServiceInterface userService;
     private final TempFileManager tempFileManager;
@@ -96,7 +106,23 @@ public class InternalApiClient {
         if (apiKey != null && !apiKey.isEmpty()) {
             headers.add("X-API-KEY", apiKey);
         }
+        // Tag the sub-step as automation so PAYG bills it under AUTOMATION regardless of which
+        // tool-level @RequiresFeature annotation the dispatched controller carries (e.g. an AI-OCR
+        // step inside a policy run must bill as AUTOMATION, not AI). Set unconditionally because
+        // every caller of this dispatcher is an automation surface by design.
+        headers.add(AUTOMATION_HEADER, "true");
 
+        // A no-file ai/tools call (e.g. create-pdf-from-html-agent) sends only string params, so
+        // without this RestTemplate would use urlencoded instead of the multipart the controller
+        // expects. File-bearing calls get the right multipart content-type from RestTemplate.
+        boolean isAiTool = endpointPath.startsWith("/api/v1/ai/tools/");
+        boolean hasFilePart =
+                body.values().stream()
+                        .flatMap(java.util.List::stream)
+                        .anyMatch(v -> v instanceof Resource);
+        if (isAiTool && !hasFilePart) {
+            headers.setContentType(MediaType.MULTIPART_FORM_DATA);
+        }
         HttpEntity<MultiValueMap<String, Object>> entity = new HttpEntity<>(body, headers);
         RequestCallback requestCallback = restTemplate.httpEntityCallback(entity, Resource.class);
 

app/common/src/main/java/stirling/software/common/service/JobExecutorService.java

@@ -57,85 +57,43 @@ public class JobExecutorService {
         this.resourceMonitor = resourceMonitor;
         this.jobQueue = jobQueue;
 
-        // Parse session timeout and calculate effective timeout once during initialization
         long sessionTimeoutMs = parseSessionTimeout(sessionTimeout);
         this.effectiveTimeoutMs = Math.min(asyncRequestTimeoutMs, sessionTimeoutMs);
         log.debug(
                 "Job executor configured with effective timeout of {} ms", this.effectiveTimeoutMs);
     }
 
-    /**
-     * Run a job either asynchronously or synchronously
-     *
-     * @param async Whether to run the job asynchronously
-     * @param work The work to be done
-     * @return The response
-     */
     public ResponseEntity<?> runJobGeneric(boolean async, Supplier<Object> work) {
         return runJobGeneric(async, work, -1);
     }
 
-    /**
-     * Run a job either asynchronously or synchronously with a custom timeout
-     *
-     * @param async Whether to run the job asynchronously
-     * @param work The work to be done
-     * @param customTimeoutMs Custom timeout in milliseconds, or -1 to use the default
-     * @return The response
-     */
     public ResponseEntity<?> runJobGeneric(
             boolean async, Supplier<Object> work, long customTimeoutMs) {
         return runJobGeneric(async, work, customTimeoutMs, false, 50);
     }
 
-    /**
-     * Run a job either asynchronously or synchronously with custom parameters
-     *
-     * @param async Whether to run the job asynchronously
-     * @param work The work to be done
-     * @param customTimeoutMs Custom timeout in milliseconds, or -1 to use the default
-     * @param queueable Whether this job can be queued when system resources are limited
-     * @param resourceWeight The resource weight of this job (1-100)
-     * @return The response
-     */
     public ResponseEntity<?> runJobGeneric(
             boolean async,
             Supplier<Object> work,
             long customTimeoutMs,
             boolean queueable,
             int resourceWeight) {
-        // Generate base UUID
         String baseJobId = UUID.randomUUID().toString();
-
-        // Scope job to authenticated user if security is enabled
         String scopedJobKey = getScopedJobKey(baseJobId);
 
         log.debug("Generated jobId: {} (base: {})", scopedJobKey, baseJobId);
 
-        // Store the scoped job ID in the request for potential use by other components
         if (request != null) {
             request.setAttribute("jobId", scopedJobKey);
-
-            // Also track this job ID in the user's session for authorization purposes
-            // This ensures users can only cancel their own jobs
-            if (request.getSession() != null) {
-                @SuppressWarnings("unchecked")
-                java.util.Set<String> userJobIds =
-                        (java.util.Set<String>) request.getSession().getAttribute("userJobIds");
-
-                if (userJobIds == null) {
-                    userJobIds = new java.util.concurrent.ConcurrentSkipListSet<>();
-                    request.getSession().setAttribute("userJobIds", userJobIds);
-                }
-
-                userJobIds.add(scopedJobKey);
-                log.debug("Added scoped job ID {} to user session", scopedJobKey);
-            }
         }
 
         String jobId = scopedJobKey;
 
-        // Determine which timeout to use
+        final String jobOwner =
+                jobOwnershipService != null
+                        ? jobOwnershipService.getCurrentUserId().orElse(null)
+                        : null;
+
         long timeoutToUse = customTimeoutMs > 0 ? customTimeoutMs : effectiveTimeoutMs;
 
         log.debug(
@@ -146,7 +104,6 @@ public class JobExecutorService {
                 queueable,
                 resourceWeight);
 
-        // Check if we need to queue this job based on resource availability
         boolean shouldQueue =
                 queueable
                         && async
@@ -154,7 +111,6 @@ public class JobExecutorService {
                         resourceMonitor.shouldQueueJob(resourceWeight);
 
         if (shouldQueue) {
-            // Queue the job instead of executing immediately
             log.debug(
                     "Queueing job {} due to resource constraints (weight: {})",
                     jobId,
@@ -162,18 +118,13 @@ public class JobExecutorService {
 
             taskManager.createTask(jobId);
 
-            // Create a specialized wrapper that updates the TaskManager
             final String capturedJobIdForQueue = jobId;
             Supplier<Object> wrappedWork =
                     () -> {
                         try {
-                            // Set jobId in ThreadLocal context for the queued job
                             stirling.software.common.util.JobContext.setJobId(
                                     capturedJobIdForQueue);
-                            log.debug(
-                                    "Set jobId {} in JobContext for queued job execution",
-                                    capturedJobIdForQueue);
-
+                            stirling.software.common.util.JobContext.setOwner(jobOwner);
                             Object result = work.get();
                             processJobResult(capturedJobIdForQueue, result);
                             return result;
@@ -186,21 +137,17 @@ public class JobExecutorService {
                             taskManager.setError(capturedJobIdForQueue, e.getMessage());
                             throw e;
                         } finally {
-                            // Clean up ThreadLocal to avoid memory leaks
                             stirling.software.common.util.JobContext.clear();
                         }
                     };
 
-            // Queue the job and get the future
             CompletableFuture<ResponseEntity<?>> future =
                     jobQueue.queueJob(jobId, resourceWeight, wrappedWork, timeoutToUse);
 
-            // Return immediately with job ID
             return ResponseEntity.ok().body(new JobResponse<>(true, jobId, null));
         } else if (async) {
             taskManager.createTask(jobId);
 
-            // Capture the jobId for the async thread
             final String capturedJobId = jobId;
 
             executor.execute(
@@ -211,13 +158,8 @@ public class JobExecutorService {
                                     capturedJobId,
                                     timeoutToUse);
 
-                            // Set jobId in ThreadLocal context for the async thread
                             stirling.software.common.util.JobContext.setJobId(capturedJobId);
-                            log.debug(
-                                    "Set jobId {} in JobContext for async execution",
-                                    capturedJobId);
-
-                            // Execute with timeout
+                            stirling.software.common.util.JobContext.setOwner(jobOwner);
                             Object result = executeWithTimeout(() -> work.get(), timeoutToUse);
                             processJobResult(capturedJobId, result);
                         } catch (TimeoutException te) {
@@ -227,7 +169,6 @@ public class JobExecutorService {
                             log.error("Error executing job {}: {}", jobId, e.getMessage(), e);
                             taskManager.setError(jobId, e.getMessage());
                         } finally {
-                            // Clean up ThreadLocal to avoid memory leaks
                             stirling.software.common.util.JobContext.clear();
                         }
                     });
@@ -237,27 +178,19 @@ public class JobExecutorService {
             try {
                 log.debug("Running sync job with timeout {} ms", timeoutToUse);
 
-                // Make jobId available to downstream components on the worker thread
                 stirling.software.common.util.JobContext.setJobId(jobId);
-                log.debug("Set jobId {} in JobContext for sync execution", jobId);
-
-                // Execute with timeout
                 Object result = executeWithTimeout(() -> work.get(), timeoutToUse);
 
-                // If the result is already a ResponseEntity, return it directly
                 if (result instanceof ResponseEntity) {
                     return (ResponseEntity<?>) result;
                 }
 
-                // Process different result types
                 return handleResultForSyncJob(result);
             } catch (TimeoutException te) {
                 log.error("Synchronous job timed out after {} ms", timeoutToUse);
                 return ResponseEntity.internalServerError()
                         .body(Map.of("error", "Job timed out after " + timeoutToUse + " ms"));
             } catch (RuntimeException e) {
-                // Check if this is a typed exception that should be handled by
-                // GlobalExceptionHandler (either directly or wrapped)
                 Throwable cause = e.getCause();
                 if (e instanceof IllegalArgumentException
                         || cause
@@ -267,16 +200,13 @@ public class JobExecutorService {
                                 instanceof
                                 stirling.software.common.util.ExceptionUtils
                                         .BaseValidationException) {
-                    // Rethrow so GlobalExceptionHandler can handle with proper HTTP status codes
                     throw e;
                 }
-                // Handle other RuntimeExceptions as generic errors
                 log.error("Error executing synchronous job: {}", e.getMessage(), e);
                 return ResponseEntity.internalServerError()
                         .body(Map.of("error", "Job failed: " + e.getMessage()));
             } catch (Exception e) {
                 log.error("Error executing synchronous job: {}", e.getMessage(), e);
-                // Construct a JSON error response
                 return ResponseEntity.internalServerError()
                         .body(Map.of("error", "Job failed: " + e.getMessage()));
             } finally {
@@ -285,23 +215,13 @@ public class JobExecutorService {
         }
     }
 
-    /**
-     * Process the result of an asynchronous job
-     *
-     * @param jobId The job ID
-     * @param result The result
-     */
     private void processJobResult(String jobId, Object result) {
         try {
             if (result instanceof byte[]) {
-                // Store byte array directly to disk to avoid double memory consumption
                 String fileId = fileStorage.storeBytes((byte[]) result, "result.pdf");
                 taskManager.setFileResult(
                         jobId, fileId, "result.pdf", MediaType.APPLICATION_PDF_VALUE);
                 log.debug("Stored byte[] result with fileId: {}", fileId);
-
-                // Let the byte array get collected naturally in the next GC cycle
-                // We don't need to force System.gc() which can be harmful
             } else if (result instanceof ResponseEntity) {
                 ResponseEntity<?> response = (ResponseEntity<?>) result;
                 Object body = response.getBody();
@@ -330,16 +250,13 @@ public class JobExecutorService {
                     taskManager.setFileResult(jobId, fileId, filename, contentType);
                     log.debug("Stored ResponseEntity<Resource> result with fileId: {}", fileId);
                 } else {
-                    // Check if the response body contains a fileId
                     if (body != null && body.toString().contains("fileId")) {
                         try {
-                            // Try to extract fileId using reflection
                             java.lang.reflect.Method getFileId =
                                     body.getClass().getMethod("getFileId");
                             String fileId = (String) getFileId.invoke(body);
 
                             if (fileId != null && !fileId.isEmpty()) {
-                                // Try to get filename and content type
                                 String filename = "result.pdf";
                                 String contentType = MediaType.APPLICATION_PDF_VALUE;
 
@@ -379,7 +296,6 @@ public class JobExecutorService {
                         }
                     }
 
-                    // Store generic result
                     taskManager.setResult(jobId, body);
                 }
             } else if (result instanceof MultipartFile file) {
@@ -388,16 +304,13 @@ public class JobExecutorService {
                         jobId, fileId, file.getOriginalFilename(), file.getContentType());
                 log.debug("Stored MultipartFile result with fileId: {}", fileId);
             } else {
-                // Check if result has a fileId field
                 if (result != null) {
                     try {
-                        // Try to extract fileId using reflection
                         java.lang.reflect.Method getFileId =
                                 result.getClass().getMethod("getFileId");
                         String fileId = (String) getFileId.invoke(result);
 
                         if (fileId != null && !fileId.isEmpty()) {
-                            // Try to get filename and content type
                             String filename = "result.pdf";
                             String contentType = MediaType.APPLICATION_PDF_VALUE;
 
@@ -435,7 +348,6 @@ public class JobExecutorService {
                     }
                 }
 
-                // Default case: store the result as is
                 taskManager.setResult(jobId, result);
             }
 
@@ -446,16 +358,8 @@ public class JobExecutorService {
         }
     }
 
-    /**
-     * Handle different result types for synchronous jobs
-     *
-     * @param result The result object
-     * @return The appropriate ResponseEntity
-     * @throws IOException If there is an error processing the result
-     */
     private ResponseEntity<?> handleResultForSyncJob(Object result) throws IOException {
         if (result instanceof byte[]) {
-            // Return byte array as PDF
             return ResponseEntity.ok()
                     .contentType(MediaType.APPLICATION_PDF)
                     .header(
@@ -463,7 +367,6 @@ public class JobExecutorService {
                             "form-data; name=\"attachment\"; filename=\"result.pdf\"")
                     .body(result);
         } else if (result instanceof MultipartFile file) {
-            // Return MultipartFile content
             return ResponseEntity.ok()
                     .contentType(MediaType.parseMediaType(file.getContentType()))
                     .header(
@@ -473,7 +376,6 @@ public class JobExecutorService {
                                     + "\"")
                     .body(file.getBytes());
         } else {
-            // Default case: return as JSON
             return ResponseEntity.ok(result);
         }
     }
@@ -493,15 +395,9 @@ public class JobExecutorService {
         return mediaType != null ? mediaType.toString() : MediaType.APPLICATION_PDF_VALUE;
     }
 
-    /**
-     * Parse session timeout string (e.g., "30m", "1h") to milliseconds
-     *
-     * @param timeout The timeout string
-     * @return The timeout in milliseconds
-     */
     private long parseSessionTimeout(String timeout) {
         if (timeout == null || timeout.isEmpty()) {
-            return 30 * 60 * 1000; // Default: 30 minutes
+            return 30 * 60 * 1000;
         }
 
         try {
@@ -523,27 +419,16 @@ public class JobExecutorService {
                 case "m" -> (long) (numericValue * 60 * 1000);
                 case "h" -> (long) (numericValue * 60 * 60 * 1000);
                 case "d" -> (long) (numericValue * 24 * 60 * 60 * 1000);
-                default -> (long) (numericValue * 60 * 1000); // Default to minutes
+                default -> (long) (numericValue * 60 * 1000);
             };
         } catch (Exception e) {
             log.warn("Could not parse session timeout '{}', using default", timeout);
-            return 30 * 60 * 1000; // Default: 30 minutes
+            return 30 * 60 * 1000;
         }
     }
 
-    /**
-     * Execute a supplier with a timeout
-     *
-     * @param supplier The supplier to execute
-     * @param timeoutMs The timeout in milliseconds
-     * @return The result from the supplier
-     * @throws TimeoutException If the execution times out
-     * @throws Exception If the supplier throws an exception
-     */
     private <T> T executeWithTimeout(Supplier<T> supplier, long timeoutMs)
             throws TimeoutException, Exception {
-        // Use the same executor as other async jobs for consistency
-        // This ensures all operations run on the same thread pool
         String currentJobId = stirling.software.common.util.JobContext.getJobId();
 
         java.util.concurrent.CompletableFuture<T> future =
@@ -577,17 +462,10 @@ public class JobExecutorService {
         }
     }
 
-    /**
-     * Get a scoped job key that includes user ownership when security is enabled.
-     *
-     * @param baseJobId the base job identifier
-     * @return scoped job key, or just baseJobId if no ownership service available
-     */
     private String getScopedJobKey(String baseJobId) {
         if (jobOwnershipService != null) {
             return jobOwnershipService.createScopedJobKey(baseJobId);
         }
-        // Security disabled, return unsecured job key
         return baseJobId;
     }
 }

app/common/src/main/java/stirling/software/common/service/MobileScannerService.java

@@ -3,7 +3,6 @@ package stirling.software.common.service;
 import java.io.IOException;
 import java.nio.file.Files;
 import java.nio.file.Path;
-import java.nio.file.Paths;
 import java.util.ArrayList;
 import java.util.HashMap;
 import java.util.List;
@@ -35,7 +34,7 @@ public class MobileScannerService {
     public MobileScannerService() throws IOException {
         // Create temp directory for mobile scanner uploads
         this.tempDirectory =
-                Paths.get(System.getProperty("java.io.tmpdir"), "stirling-mobile-scanner");
+                Path.of(System.getProperty("java.io.tmpdir"), "stirling-mobile-scanner");
         Files.createDirectories(tempDirectory);
         log.info("Mobile scanner temp directory: {}", tempDirectory);
     }

app/common/src/main/java/stirling/software/common/service/PostHogService.java

@@ -8,7 +8,7 @@ import java.lang.management.OperatingSystemMXBean;
 import java.lang.management.RuntimeMXBean;
 import java.lang.management.ThreadMXBean;
 import java.nio.file.Files;
-import java.nio.file.Paths;
+import java.nio.file.Path;
 import java.util.HashMap;
 import java.util.Locale;
 import java.util.Map;
@@ -160,7 +160,7 @@ public class PostHogService {
     }
 
     private boolean isRunningInDocker() {
-        return Files.exists(Paths.get("/.dockerenv"));
+        return Files.exists(Path.of("/.dockerenv"));
     }
 
     private Map<String, Object> getDockerMetrics() {

app/common/src/main/java/stirling/software/common/service/ToolMetadataService.java

@@ -1,11 +1,21 @@
 package stirling.software.common.service;
 
+import java.util.List;
+
 /** Provides metadata about tool endpoints for internal dispatch. */
 public interface ToolMetadataService {
 
     /** Returns true if the given operation path accepts multiple input files. */
     boolean isMultiInput(String operationPath);
 
+    /**
+     * Returns the file extensions (lowercase, no leading dot, e.g. {@code "pdf"}) that the
+     * operation accepts as input ({@code output=false}) or produces as output ({@code
+     * output=true}), derived from the endpoint's declared type. Returns {@code null} when the
+     * endpoint declares no specific type, which callers should treat as "any type accepted".
+     */
+    List<String> getExtensionTypes(boolean output, String operationPath);
+
     /**
      * Returns true when the endpoint's ZIP response is a transport for multiple typed results and
      * should be unpacked: multi-output endpoints (Type:SIMO / Type:MIMO) and wrapper declarations

app/common/src/main/java/stirling/software/common/util/GeneralUtils.java

@@ -255,7 +255,7 @@ public class GeneralUtils {
         String pattern = locationPattern;
         if (pattern.startsWith("file:")) {
             String rawPath = pattern.substring(5).replace("\\*", "").replace("/*", "");
-            Path normalizePath = Paths.get(rawPath).normalize();
+            Path normalizePath = Path.of(rawPath).normalize();
             pattern = "file:" + normalizePath.toString().replace("\\", "/") + "/*";
         }
         return ResourcePatternUtils.getResourcePatternResolver(resourceLoader)
@@ -837,7 +837,7 @@ public class GeneralUtils {
     }
 
     public boolean createDir(String path) {
-        Path folder = Paths.get(path);
+        Path folder = Path.of(path);
         if (!Files.exists(folder)) {
             try {
                 Files.createDirectories(folder);
@@ -867,7 +867,7 @@ public class GeneralUtils {
 
     public void saveKeyToSettings(String key, Object newValue) throws IOException {
         String[] keyArray = key.split("\\.");
-        Path settingsPath = Paths.get(InstallationPathConfig.getSettingsPath());
+        Path settingsPath = Path.of(InstallationPathConfig.getSettingsPath());
         YamlHelper settingsYaml = new YamlHelper(settingsPath);
         settingsYaml.updateValue(Arrays.asList(keyArray), newValue);
         settingsYaml.saveOverride(settingsPath);
@@ -888,7 +888,7 @@ public class GeneralUtils {
             return;
         }
 
-        Path settingsPath = Paths.get(InstallationPathConfig.getSettingsPath());
+        Path settingsPath = Path.of(InstallationPathConfig.getSettingsPath());
         YamlHelper settingsYaml = new YamlHelper(settingsPath);
 
         // Apply all updates to the same YamlHelper instance
@@ -974,11 +974,11 @@ public class GeneralUtils {
      */
     public void extractPipeline() throws IOException {
         Path pipelineDir =
-                Paths.get(InstallationPathConfig.getPipelinePath(), DEFAULT_WEBUI_CONFIGS_DIR);
+                Path.of(InstallationPathConfig.getPipelinePath(), DEFAULT_WEBUI_CONFIGS_DIR);
         Files.createDirectories(pipelineDir);
 
         for (String name : DEFAULT_VALID_PIPELINE) {
-            if (!Paths.get(name).getFileName().toString().equals(name)) {
+            if (!Path.of(name).getFileName().toString().equals(name)) {
                 log.error("Invalid pipeline file name: {}", name);
                 throw new IllegalArgumentException("Invalid pipeline file name: " + name);
             }
@@ -1014,7 +1014,7 @@ public class GeneralUtils {
             throw new IllegalArgumentException(
                     "scriptName must not contain path traversal characters");
         }
-        if (!Paths.get(scriptName).getFileName().toString().equals(scriptName)) {
+        if (!Path.of(scriptName).getFileName().toString().equals(scriptName)) {
             throw new IllegalArgumentException(
                     "scriptName must not contain path traversal characters");
         }
@@ -1024,7 +1024,7 @@ public class GeneralUtils {
                     "scriptName must be either 'png_to_webp.py' or 'split_photos.py'");
         }
 
-        Path scriptsDir = Paths.get(InstallationPathConfig.getScriptsPath(), PYTHON_SCRIPTS_DIR);
+        Path scriptsDir = Path.of(InstallationPathConfig.getScriptsPath(), PYTHON_SCRIPTS_DIR);
         Files.createDirectories(scriptsDir);
 
         Path target = scriptsDir.resolve(scriptName);

app/common/src/main/java/stirling/software/common/util/JarPathUtil.java

@@ -4,7 +4,6 @@ import java.io.File;
 import java.net.URISyntaxException;
 import java.nio.file.Files;
 import java.nio.file.Path;
-import java.nio.file.Paths;
 
 import lombok.extern.slf4j.Slf4j;
 
@@ -20,7 +19,7 @@ public class JarPathUtil {
     public static Path currentJar() {
         try {
             Path jar =
-                    Paths.get(
+                    Path.of(
                                     JarPathUtil.class
                                             .getProtectionDomain()
                                             .getCodeSource()
@@ -61,14 +60,14 @@ public class JarPathUtil {
         }
 
         // Location 2: ./build/libs/ (development build)
-        possibleLocations[1] = Paths.get("build", "libs", "restart-helper.jar").toAbsolutePath();
+        possibleLocations[1] = Path.of("build", "libs", "restart-helper.jar").toAbsolutePath();
 
         // Location 3: app/common/build/libs/ (multi-module build)
         possibleLocations[2] =
-                Paths.get("app", "common", "build", "libs", "restart-helper.jar").toAbsolutePath();
+                Path.of("app", "common", "build", "libs", "restart-helper.jar").toAbsolutePath();
 
         // Location 4: Current working directory
-        possibleLocations[3] = Paths.get("restart-helper.jar").toAbsolutePath();
+        possibleLocations[3] = Path.of("restart-helper.jar").toAbsolutePath();
 
         // Check each location
         for (Path location : possibleLocations) {

app/common/src/main/java/stirling/software/common/util/JobContext.java

@@ -1,8 +1,9 @@
 package stirling.software.common.util;
 
-/** Thread-local context for passing job ID across async boundaries */
+/** Thread-local context for passing job ID and owner across async boundaries */
 public class JobContext {
     private static final ThreadLocal<String> CURRENT_JOB_ID = new ThreadLocal<>();
+    private static final ThreadLocal<String> CURRENT_OWNER = new ThreadLocal<>();
 
     public static void setJobId(String jobId) {
         CURRENT_JOB_ID.set(jobId);
@@ -12,7 +13,16 @@ public class JobContext {
         return CURRENT_JOB_ID.get();
     }
 
+    public static void setOwner(String owner) {
+        CURRENT_OWNER.set(owner);
+    }
+
+    public static String getOwner() {
+        return CURRENT_OWNER.get();
+    }
+
     public static void clear() {
         CURRENT_JOB_ID.remove();
+        CURRENT_OWNER.remove();
     }
 }

app/common/src/main/java/stirling/software/common/util/OfficeDocumentSanitizer.java

@@ -0,0 +1,310 @@
+package stirling.software.common.util;
+
+import java.io.ByteArrayInputStream;
+import java.io.ByteArrayOutputStream;
+import java.io.IOException;
+import java.util.ArrayList;
+import java.util.List;
+import java.util.Locale;
+import java.util.Set;
+import java.util.zip.ZipEntry;
+import java.util.zip.ZipInputStream;
+import java.util.zip.ZipOutputStream;
+
+import javax.xml.XMLConstants;
+import javax.xml.parsers.DocumentBuilder;
+import javax.xml.parsers.DocumentBuilderFactory;
+import javax.xml.parsers.ParserConfigurationException;
+import javax.xml.transform.OutputKeys;
+import javax.xml.transform.Transformer;
+import javax.xml.transform.TransformerException;
+import javax.xml.transform.TransformerFactory;
+import javax.xml.transform.dom.DOMSource;
+import javax.xml.transform.stream.StreamResult;
+
+import org.springframework.stereotype.Component;
+import org.w3c.dom.Document;
+import org.w3c.dom.Element;
+import org.w3c.dom.NamedNodeMap;
+import org.w3c.dom.Node;
+import org.w3c.dom.NodeList;
+import org.xml.sax.SAXException;
+
+import io.github.pixee.security.ZipSecurity;
+
+import lombok.extern.slf4j.Slf4j;
+
+import stirling.software.common.model.ApplicationProperties;
+import stirling.software.common.service.SsrfProtectionService;
+
+// Strips external refs from OOXML/ODF uploads so LibreOffice can't be made to fetch them.
+@Component
+@Slf4j
+public class OfficeDocumentSanitizer {
+
+    private static final Set<String> OOXML_EXTENSIONS =
+            Set.of(
+                    "docx", "docm", "dotx", "dotm", "xlsx", "xlsm", "xltx", "xltm", "pptx", "pptm",
+                    "potx", "potm", "ppsx", "ppsm");
+
+    private static final Set<String> ODF_EXTENSIONS =
+            Set.of(
+                    "odt", "ott", "ods", "ots", "odp", "otp", "odg", "otg", "odf", "odc", "odi",
+                    "odm");
+
+    private static final Set<String> ODF_XML_PARTS =
+            Set.of("content.xml", "styles.xml", "meta.xml", "settings.xml");
+
+    private final SsrfProtectionService ssrfProtectionService;
+    private final ApplicationProperties applicationProperties;
+
+    public OfficeDocumentSanitizer(
+            SsrfProtectionService ssrfProtectionService,
+            ApplicationProperties applicationProperties) {
+        this.ssrfProtectionService = ssrfProtectionService;
+        this.applicationProperties = applicationProperties;
+    }
+
+    public boolean isSanitizableExtension(String extension) {
+        if (extension == null) {
+            return false;
+        }
+        String lower = extension.toLowerCase(Locale.ROOT);
+        return OOXML_EXTENSIONS.contains(lower) || ODF_EXTENSIONS.contains(lower);
+    }
+
+    public byte[] sanitize(byte[] documentBytes, String extension) throws IOException {
+        if (documentBytes == null || documentBytes.length == 0) {
+            throw new IOException("Office document input is empty or null");
+        }
+        if (applicationProperties.getSystem().isDisableSanitize()) {
+            log.debug("Office document sanitization disabled by configuration");
+            return documentBytes;
+        }
+        if (!isSanitizableExtension(extension)) {
+            return documentBytes;
+        }
+
+        ByteArrayOutputStream out = new ByteArrayOutputStream(documentBytes.length);
+        try (ZipInputStream zipIn =
+                        ZipSecurity.createHardenedInputStream(
+                                new ByteArrayInputStream(documentBytes));
+                ZipOutputStream zipOut = new ZipOutputStream(out)) {
+
+            ZipEntry entry;
+            while ((entry = zipIn.getNextEntry()) != null) {
+                String name = entry.getName();
+                byte[] bytes = entry.isDirectory() ? new byte[0] : zipIn.readAllBytes();
+
+                if (!entry.isDirectory()) {
+                    bytes = sanitizeEntry(name, bytes);
+                }
+
+                ZipEntry outEntry = new ZipEntry(name);
+                if (entry.getComment() != null) {
+                    outEntry.setComment(entry.getComment());
+                }
+                if (entry.getExtra() != null) {
+                    outEntry.setExtra(entry.getExtra());
+                }
+                zipOut.putNextEntry(outEntry);
+                if (!entry.isDirectory()) {
+                    zipOut.write(bytes);
+                }
+                zipOut.closeEntry();
+            }
+        }
+        return out.toByteArray();
+    }
+
+    private byte[] sanitizeEntry(String entryName, byte[] entryBytes) {
+        String lower = entryName.toLowerCase(Locale.ROOT);
+        try {
+            if (lower.endsWith(".rels")) {
+                return sanitizeOoxmlRels(entryBytes);
+            }
+            if (isOdfXmlPart(lower)) {
+                return sanitizeOdfXml(entryBytes);
+            }
+        } catch (ParserConfigurationException
+                | SAXException
+                | IOException
+                | TransformerException e) {
+            log.warn(
+                    "Failed to parse XML part '{}' for sanitization, leaving as-is: {}",
+                    entryName,
+                    e.getMessage());
+        }
+        return entryBytes;
+    }
+
+    private boolean isOdfXmlPart(String lowerName) {
+        int slash = lowerName.lastIndexOf('/');
+        String base = slash >= 0 ? lowerName.substring(slash + 1) : lowerName;
+        return ODF_XML_PARTS.contains(base);
+    }
+
+    private byte[] sanitizeOoxmlRels(byte[] xmlBytes)
+            throws IOException, ParserConfigurationException, SAXException, TransformerException {
+        Document doc = parseSecurely(xmlBytes);
+        Element root = doc.getDocumentElement();
+        if (root == null) {
+            return xmlBytes;
+        }
+        NodeList relationships = root.getElementsByTagNameNS("*", "Relationship");
+        List<Node> toRemove = new ArrayList<>();
+        for (int i = 0; i < relationships.getLength(); i++) {
+            Node node = relationships.item(i);
+            NamedNodeMap attrs = node.getAttributes();
+            if (attrs == null) {
+                continue;
+            }
+            Node targetMode = attrs.getNamedItem("TargetMode");
+            if (targetMode == null || !"external".equalsIgnoreCase(targetMode.getNodeValue())) {
+                continue;
+            }
+            Node target = attrs.getNamedItem("Target");
+            String targetValue = target == null ? "" : target.getNodeValue();
+            if (isAdminAllowed(targetValue)) {
+                continue;
+            }
+            log.warn(
+                    "Stripping OOXML external relationship target: {}",
+                    truncateForLog(targetValue));
+            toRemove.add(node);
+        }
+        if (toRemove.isEmpty()) {
+            return xmlBytes;
+        }
+        for (Node n : toRemove) {
+            n.getParentNode().removeChild(n);
+        }
+        return serializeDocument(doc);
+    }
+
+    private byte[] sanitizeOdfXml(byte[] xmlBytes)
+            throws IOException, ParserConfigurationException, SAXException, TransformerException {
+        Document doc = parseSecurely(xmlBytes);
+        Element root = doc.getDocumentElement();
+        if (root == null) {
+            return xmlBytes;
+        }
+        boolean modified = stripExternalHrefs(root);
+        if (!modified) {
+            return xmlBytes;
+        }
+        return serializeDocument(doc);
+    }
+
+    private boolean stripExternalHrefs(Node node) {
+        boolean modified = false;
+        if (node.getNodeType() == Node.ELEMENT_NODE) {
+            NamedNodeMap attrs = node.getAttributes();
+            List<String> hrefAttrsToRemove = new ArrayList<>();
+            for (int i = 0; i < attrs.getLength(); i++) {
+                Node attr = attrs.item(i);
+                String name = attr.getNodeName();
+                if (name == null) {
+                    continue;
+                }
+                String lower = name.toLowerCase(Locale.ROOT);
+                if (!(lower.equals("xlink:href")
+                        || lower.endsWith(":href")
+                        || lower.equals("href"))) {
+                    continue;
+                }
+                String value = attr.getNodeValue();
+                if (!isExternalUrl(value)) {
+                    continue;
+                }
+                if (isAdminAllowed(value)) {
+                    continue;
+                }
+                log.warn(
+                        "Stripping ODF external href attribute ({}): {}",
+                        name,
+                        truncateForLog(value));
+                hrefAttrsToRemove.add(name);
+            }
+            Element element = (Element) node;
+            for (String attrName : hrefAttrsToRemove) {
+                element.removeAttribute(attrName);
+                modified = true;
+            }
+        }
+        NodeList children = node.getChildNodes();
+        for (int i = 0; i < children.getLength(); i++) {
+            if (stripExternalHrefs(children.item(i))) {
+                modified = true;
+            }
+        }
+        return modified;
+    }
+
+    private boolean isExternalUrl(String url) {
+        if (url == null) {
+            return false;
+        }
+        String trimmed = url.trim().toLowerCase(Locale.ROOT);
+        if (trimmed.isEmpty() || trimmed.startsWith("#") || trimmed.startsWith("../")) {
+            return false;
+        }
+        return trimmed.startsWith("http://")
+                || trimmed.startsWith("https://")
+                || trimmed.startsWith("ftp://")
+                || trimmed.startsWith("ftps://")
+                || trimmed.startsWith("file:")
+                || trimmed.startsWith("smb:")
+                || trimmed.startsWith("\\\\")
+                || trimmed.startsWith("//");
+    }
+
+    // Preserved only with an explicit allowedDomains entry; MEDIUM default would admit public URLs.
+    private boolean isAdminAllowed(String url) {
+        if (ssrfProtectionService == null || url == null || url.isBlank()) {
+            return false;
+        }
+        ApplicationProperties.Html.UrlSecurity config =
+                applicationProperties.getSystem().getHtml().getUrlSecurity();
+        if (config == null
+                || config.getAllowedDomains() == null
+                || config.getAllowedDomains().isEmpty()) {
+            return false;
+        }
+        return ssrfProtectionService.isUrlAllowed(url);
+    }
+
+    private Document parseSecurely(byte[] xmlBytes)
+            throws ParserConfigurationException, SAXException, IOException {
+        DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
+        factory.setFeature(XMLConstants.FEATURE_SECURE_PROCESSING, true);
+        factory.setFeature("http://apache.org/xml/features/disallow-doctype-decl", true);
+        factory.setFeature("http://xml.org/sax/features/external-general-entities", false);
+        factory.setFeature("http://xml.org/sax/features/external-parameter-entities", false);
+        factory.setFeature("http://apache.org/xml/features/nonvalidating/load-external-dtd", false);
+        factory.setXIncludeAware(false);
+        factory.setExpandEntityReferences(false);
+        factory.setNamespaceAware(true);
+        DocumentBuilder builder = factory.newDocumentBuilder();
+        return builder.parse(new ByteArrayInputStream(xmlBytes));
+    }
+
+    private byte[] serializeDocument(Document doc) throws TransformerException {
+        TransformerFactory tf = TransformerFactory.newInstance();
+        tf.setFeature(XMLConstants.FEATURE_SECURE_PROCESSING, true);
+        Transformer transformer = tf.newTransformer();
+        transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
+        transformer.setOutputProperty(OutputKeys.INDENT, "no");
+        transformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no");
+        ByteArrayOutputStream baos = new ByteArrayOutputStream();
+        transformer.transform(new DOMSource(doc), new StreamResult(baos));
+        return baos.toByteArray();
+    }
+
+    private String truncateForLog(String value) {
+        if (value == null) {
+            return "null";
+        }
+        return value.length() > 80 ? value.substring(0, 80) + "..." : value;
+    }
+}

app/common/src/main/java/stirling/software/common/util/propertyeditor/JsonListPropertyEditor.java

@@ -0,0 +1,48 @@
+package stirling.software.common.util.propertyeditor;
+
+import java.beans.PropertyEditorSupport;
+import java.util.ArrayList;
+import java.util.List;
+
+import lombok.extern.slf4j.Slf4j;
+
+import tools.jackson.core.type.TypeReference;
+import tools.jackson.databind.DeserializationFeature;
+import tools.jackson.databind.ObjectMapper;
+import tools.jackson.databind.json.JsonMapper;
+
+/**
+ * Binds a multipart form value containing a JSON array into a typed {@code List<T>}. Used for
+ * endpoints that accept structured list parameters via {@code @ModelAttribute} — the form field
+ * carries the full JSON array as its value and the editor parses it once.
+ */
+@Slf4j
+public class JsonListPropertyEditor<T> extends PropertyEditorSupport {
+
+    private static final ObjectMapper OBJECT_MAPPER =
+            JsonMapper.builder()
+                    .enable(DeserializationFeature.ACCEPT_SINGLE_VALUE_AS_ARRAY)
+                    .disable(DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES)
+                    .build();
+
+    private final TypeReference<? extends List<T>> typeRef;
+
+    public JsonListPropertyEditor(TypeReference<? extends List<T>> typeRef) {
+        this.typeRef = typeRef;
+    }
+
+    @Override
+    public void setAsText(String text) throws IllegalArgumentException {
+        if (text == null || text.trim().isEmpty()) {
+            setValue(new ArrayList<T>());
+            return;
+        }
+        try {
+            setValue(OBJECT_MAPPER.readValue(text, typeRef));
+        } catch (Exception e) {
+            log.error("Failed to parse JSON list value", e);
+            throw new IllegalArgumentException(
+                    "Expected a JSON array but could not parse: " + e.getMessage());
+        }
+    }
+}

app/common/src/main/java/stirling/software/common/util/propertyeditor/JsonObjectPropertyEditor.java

@@ -0,0 +1,41 @@
+package stirling.software.common.util.propertyeditor;
+
+import java.beans.PropertyEditorSupport;
+
+import lombok.extern.slf4j.Slf4j;
+
+import tools.jackson.databind.DeserializationFeature;
+import tools.jackson.databind.ObjectMapper;
+import tools.jackson.databind.json.JsonMapper;
+
+/**
+ * Binds a multipart form value containing a JSON object into a typed {@code T}. Companion to {@link
+ * JsonListPropertyEditor} for single-object nested fields on {@code @ModelAttribute} endpoints.
+ */
+@Slf4j
+public class JsonObjectPropertyEditor<T> extends PropertyEditorSupport {
+
+    private static final ObjectMapper OBJECT_MAPPER =
+            JsonMapper.builder().disable(DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES).build();
+
+    private final Class<T> type;
+
+    public JsonObjectPropertyEditor(Class<T> type) {
+        this.type = type;
+    }
+
+    @Override
+    public void setAsText(String text) throws IllegalArgumentException {
+        if (text == null || text.trim().isEmpty()) {
+            setValue(null);
+            return;
+        }
+        try {
+            setValue(OBJECT_MAPPER.readValue(text, type));
+        } catch (Exception e) {
+            log.error("Failed to parse JSON object value", e);
+            throw new IllegalArgumentException(
+                    "Expected a JSON object but could not parse: " + e.getMessage());
+        }
+    }
+}

app/common/src/main/java/stirling/software/common/util/propertyeditor/StringToArrayListPropertyEditor.java

@@ -1,53 +0,0 @@
-package stirling.software.common.util.propertyeditor;
-
-import java.beans.PropertyEditorSupport;
-import java.util.ArrayList;
-import java.util.List;
-
-import lombok.extern.slf4j.Slf4j;
-
-import tools.jackson.databind.DeserializationFeature;
-import tools.jackson.databind.JavaType;
-import tools.jackson.databind.ObjectMapper;
-import tools.jackson.databind.json.JsonMapper;
-
-/**
- * Spring property editor that decodes a JSON string into a typed {@link ArrayList}. Used to bind
- * complex list parameters (e.g. {@code List<RedactionArea>}, {@code List<EditTextOperation>}) from
- * multipart form fields, where Spring's default binding cannot deserialize a JSON array.
- */
-@Slf4j
-public class StringToArrayListPropertyEditor<T> extends PropertyEditorSupport {
-
-    private final ObjectMapper objectMapper =
-            JsonMapper.builder()
-                    .enable(DeserializationFeature.ACCEPT_SINGLE_VALUE_AS_ARRAY)
-                    .disable(DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES)
-                    .build();
-
-    private final Class<T> elementType;
-
-    public StringToArrayListPropertyEditor(Class<T> elementType) {
-        this.elementType = elementType;
-    }
-
-    @Override
-    public void setAsText(String text) throws IllegalArgumentException {
-        if (text == null || text.trim().isEmpty()) {
-            setValue(new ArrayList<>());
-            return;
-        }
-        try {
-            JavaType listType =
-                    objectMapper
-                            .getTypeFactory()
-                            .constructCollectionType(ArrayList.class, elementType);
-            List<T> list = objectMapper.readValue(text, listType);
-            setValue(list);
-        } catch (Exception e) {
-            log.error("Exception while converting {}", e);
-            throw new IllegalArgumentException(
-                    "Failed to convert java.lang.String to java.util.List");
-        }
-    }
-}

app/common/src/test/java/stirling/software/SPDF/config/EndpointConfigurationGapTest.java

@@ -0,0 +1,481 @@
+package stirling.software.SPDF.config;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertNotNull;
+import static org.junit.jupiter.api.Assertions.assertNull;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+import java.util.List;
+import java.util.Set;
+
+import org.junit.jupiter.api.BeforeEach;
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Nested;
+import org.junit.jupiter.api.Test;
+
+import stirling.software.SPDF.config.EndpointConfiguration.DisableReason;
+import stirling.software.SPDF.config.EndpointConfiguration.EndpointAvailability;
+import stirling.software.common.model.ApplicationProperties;
+
+/**
+ * Unit tests for {@link EndpointConfiguration}. The class wires up its endpoint/group registry in
+ * {@code init()} during construction and then applies environment overrides. We build it with a
+ * real {@link ApplicationProperties} (whose System/Endpoints sub-objects are non-null by default)
+ * so the constructor runs cleanly without any mocking.
+ */
+class EndpointConfigurationGapTest {
+
+    private ApplicationProperties applicationProperties;
+
+    /**
+     * Construct an EndpointConfiguration with the given pro flag and current applicationProperties.
+     */
+    private EndpointConfiguration build(boolean runningProOrHigher) {
+        return new EndpointConfiguration(applicationProperties, runningProOrHigher);
+    }
+
+    /** Default config: not pro, no removals, url-to-pdf disabled (default System flag is false). */
+    private EndpointConfiguration buildDefault() {
+        return build(false);
+    }
+
+    @BeforeEach
+    void setUp() {
+        applicationProperties = new ApplicationProperties();
+    }
+
+    @Nested
+    @DisplayName("endpointKeyForUri (static)")
+    class EndpointKeyForUriTests {
+
+        @Test
+        @DisplayName("returns null for null uri")
+        void nullUri() {
+            assertNull(EndpointConfiguration.endpointKeyForUri(null));
+        }
+
+        @Test
+        @DisplayName("returns null when uri does not contain /api/v1")
+        void notApiPath() {
+            assertNull(EndpointConfiguration.endpointKeyForUri("/foo/bar/baz"));
+            assertNull(EndpointConfiguration.endpointKeyForUri("https://example.com/home"));
+        }
+
+        @Test
+        @DisplayName("returns null when uri has too few path segments")
+        void tooFewSegments() {
+            // "/api/v1/general" splits to ["", "api", "v1", "general"] -> length 4, not > 4
+            assertNull(EndpointConfiguration.endpointKeyForUri("/api/v1/general"));
+        }
+
+        @Test
+        @DisplayName("extracts plain endpoint key from a standard /api/v1/<group>/<endpoint> uri")
+        void plainEndpoint() {
+            assertEquals(
+                    "remove-pages",
+                    EndpointConfiguration.endpointKeyForUri("/api/v1/general/remove-pages"));
+        }
+
+        @Test
+        @DisplayName("builds a <from>-to-<to> key for convert endpoints")
+        void convertEndpoint() {
+            assertEquals(
+                    "pdf-to-img",
+                    EndpointConfiguration.endpointKeyForUri("/api/v1/convert/pdf/img"));
+        }
+
+        @Test
+        @DisplayName("convert path without a target segment falls back to the segment after group")
+        void convertWithoutTarget() {
+            // "/api/v1/convert/pdf" -> length 5, the convert branch needs length > 5
+            assertEquals("pdf", EndpointConfiguration.endpointKeyForUri("/api/v1/convert/pdf"));
+        }
+    }
+
+    @Nested
+    @DisplayName("enable / disable endpoint")
+    class EnableDisableEndpointTests {
+
+        @Test
+        @DisplayName("a freshly registered endpoint is enabled by default")
+        void enabledByDefault() {
+            EndpointConfiguration config = buildDefault();
+            assertTrue(config.isEndpointEnabled("merge-pdfs"));
+        }
+
+        @Test
+        @DisplayName("disableEndpoint marks the endpoint disabled")
+        void disableEndpoint() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("merge-pdfs");
+            assertFalse(config.isEndpointEnabled("merge-pdfs"));
+        }
+
+        @Test
+        @DisplayName("enableEndpoint re-enables a previously disabled endpoint")
+        void reEnableEndpoint() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("merge-pdfs");
+            assertFalse(config.isEndpointEnabled("merge-pdfs"));
+            config.enableEndpoint("merge-pdfs");
+            assertTrue(config.isEndpointEnabled("merge-pdfs"));
+        }
+
+        @Test
+        @DisplayName("leading slash is normalized away on disable")
+        void leadingSlashNormalizedOnDisable() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("/merge-pdfs");
+            // both forms resolve to the same key
+            assertFalse(config.isEndpointEnabled("merge-pdfs"));
+            assertFalse(config.isEndpointEnabled("/merge-pdfs"));
+        }
+
+        @Test
+        @DisplayName("isEndpointEnabled tolerates a leading slash on the query")
+        void leadingSlashOnQuery() {
+            EndpointConfiguration config = buildDefault();
+            assertTrue(config.isEndpointEnabled("/merge-pdfs"));
+        }
+
+        @Test
+        @DisplayName("disabling clears with enable, removing the disable reason")
+        void enableClearsReason() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("split-pages", DisableReason.DEPENDENCY);
+            assertEquals(
+                    DisableReason.DEPENDENCY,
+                    config.getEndpointAvailability("split-pages").getReason());
+            config.enableEndpoint("split-pages");
+            EndpointAvailability availability = config.getEndpointAvailability("split-pages");
+            assertTrue(availability.isEnabled());
+            assertNull(availability.getReason());
+        }
+    }
+
+    @Nested
+    @DisplayName("isEndpointEnabledForUri")
+    class IsEndpointEnabledForUriTests {
+
+        @Test
+        @DisplayName("translates a /api/v1 uri to a key and reports its status")
+        void translatesUri() {
+            EndpointConfiguration config = buildDefault();
+            assertTrue(config.isEndpointEnabledForUri("/api/v1/general/merge-pdfs"));
+            config.disableEndpoint("merge-pdfs");
+            assertFalse(config.isEndpointEnabledForUri("/api/v1/general/merge-pdfs"));
+        }
+
+        @Test
+        @DisplayName("falls back to treating a non-api uri as a raw key")
+        void fallsBackToRawKey() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("merge-pdfs");
+            // non-api path: key resolution returns null, so the uri itself is used as the key
+            assertFalse(config.isEndpointEnabledForUri("merge-pdfs"));
+        }
+    }
+
+    @Nested
+    @DisplayName("group enable / disable")
+    class GroupTests {
+
+        @Test
+        @DisplayName("a functional group with all endpoints enabled reports enabled")
+        void functionalGroupEnabled() {
+            EndpointConfiguration config = buildDefault();
+            assertTrue(config.isGroupEnabled("PageOps"));
+        }
+
+        @Test
+        @DisplayName("disabling a functional group cascades to all its endpoints")
+        void disableFunctionalGroupCascades() {
+            EndpointConfiguration config = buildDefault();
+            config.disableGroup("PageOps");
+            assertFalse(config.isGroupEnabled("PageOps"));
+            assertFalse(config.isEndpointEnabled("remove-pages"));
+            assertFalse(config.isEndpointEnabled("split-pages"));
+        }
+
+        @Test
+        @DisplayName("re-enabling a functional group re-enables its endpoints")
+        void enableFunctionalGroupRestores() {
+            EndpointConfiguration config = buildDefault();
+            config.disableGroup("PageOps");
+            assertFalse(config.isEndpointEnabled("remove-pages"));
+            config.enableGroup("PageOps");
+            assertTrue(config.isEndpointEnabled("remove-pages"));
+            assertTrue(config.isGroupEnabled("PageOps"));
+        }
+
+        @Test
+        @DisplayName("a functional group with one disabled endpoint is not enabled")
+        void functionalGroupWithDisabledEndpoint() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("remove-pages");
+            assertFalse(config.isGroupEnabled("PageOps"));
+        }
+
+        @Test
+        @DisplayName("disabledGroups reflects disabled groups and getDisabledGroups returns a copy")
+        void getDisabledGroupsReturnsCopy() {
+            EndpointConfiguration config = buildDefault();
+            config.disableGroup("PageOps");
+            Set<String> disabled = config.getDisabledGroups();
+            assertTrue(disabled.contains("PageOps"));
+            // mutating the returned set must not affect internal state
+            disabled.clear();
+            assertTrue(config.getDisabledGroups().contains("PageOps"));
+        }
+
+        @Test
+        @DisplayName("an unknown group with no endpoints is not enabled")
+        void unknownGroupNotEnabled() {
+            EndpointConfiguration config = buildDefault();
+            assertFalse(config.isGroupEnabled("NoSuchGroupXyz"));
+        }
+    }
+
+    @Nested
+    @DisplayName("tool group semantics")
+    class ToolGroupTests {
+
+        @Test
+        @DisplayName("a tool group is enabled until explicitly disabled")
+        void toolGroupEnabledUntilDisabled() {
+            EndpointConfiguration config = buildDefault();
+            assertTrue(config.isGroupEnabled("qpdf"));
+            config.disableGroup("qpdf");
+            assertFalse(config.isGroupEnabled("qpdf"));
+        }
+
+        @Test
+        @DisplayName("disabling a tool group does NOT cascade to its endpoints directly")
+        void toolGroupNoCascade() {
+            EndpointConfiguration config = buildDefault();
+            // repair has alternatives (qpdf, Ghostscript); disabling only qpdf keeps it enabled
+            config.disableGroup("qpdf");
+            assertTrue(config.isEndpointEnabled("repair"));
+        }
+
+        @Test
+        @DisplayName("endpoint with alternatives is disabled only when all tool groups are gone")
+        void allAlternativesDisabled() {
+            EndpointConfiguration config = buildDefault();
+            config.disableGroup("qpdf");
+            config.disableGroup("Ghostscript");
+            // repair's only alternatives are qpdf and Ghostscript
+            assertFalse(config.isEndpointEnabled("repair"));
+        }
+
+        @Test
+        @DisplayName("endpoint with a still-enabled alternative stays enabled")
+        void oneAlternativeRemains() {
+            EndpointConfiguration config = buildDefault();
+            // compress-pdf alternatives: qpdf, Ghostscript, Java
+            config.disableGroup("qpdf");
+            config.disableGroup("Ghostscript");
+            assertTrue(config.isEndpointEnabled("compress-pdf"));
+            config.disableGroup("Java");
+            assertFalse(config.isEndpointEnabled("compress-pdf"));
+        }
+
+        @Test
+        @DisplayName("single-dependency endpoint (no alternatives) disabled when its tool group is")
+        void singleDependencyDisabled() {
+            EndpointConfiguration config = buildDefault();
+            // pdf-to-epub depends on Calibre, no alternatives registered
+            assertTrue(config.isEndpointEnabled("pdf-to-epub"));
+            config.disableGroup("Calibre");
+            assertFalse(config.isEndpointEnabled("pdf-to-epub"));
+        }
+    }
+
+    @Nested
+    @DisplayName("addEndpointToGroup / addEndpointAlternative")
+    class RegistrationTests {
+
+        @Test
+        @DisplayName("addEndpointToGroup makes the endpoint part of the group")
+        void addEndpointToGroup() {
+            EndpointConfiguration config = buildDefault();
+            config.addEndpointToGroup("CustomGroup", "custom-endpoint");
+            Set<String> endpoints = config.getEndpointsForGroup("CustomGroup");
+            assertTrue(endpoints.contains("custom-endpoint"));
+        }
+
+        @Test
+        @DisplayName("disabling a custom functional group disables its added endpoint")
+        void customFunctionalGroupCascades() {
+            EndpointConfiguration config = buildDefault();
+            config.addEndpointToGroup("CustomGroup", "custom-endpoint");
+            assertTrue(config.isEndpointEnabled("custom-endpoint"));
+            config.disableGroup("CustomGroup");
+            assertFalse(config.isEndpointEnabled("custom-endpoint"));
+        }
+
+        @Test
+        @DisplayName("getEndpointsForGroup returns an empty set for unknown groups")
+        void unknownGroupEmptySet() {
+            EndpointConfiguration config = buildDefault();
+            Set<String> endpoints = config.getEndpointsForGroup("NoSuchGroupXyz");
+            assertNotNull(endpoints);
+            assertTrue(endpoints.isEmpty());
+        }
+    }
+
+    @Nested
+    @DisplayName("getEndpointAvailability / determineDisableReason")
+    class AvailabilityTests {
+
+        @Test
+        @DisplayName("an enabled endpoint has a null disable reason")
+        void enabledHasNullReason() {
+            EndpointConfiguration config = buildDefault();
+            EndpointAvailability availability = config.getEndpointAvailability("merge-pdfs");
+            assertTrue(availability.isEnabled());
+            assertNull(availability.getReason());
+        }
+
+        @Test
+        @DisplayName("explicit disable preserves the supplied reason")
+        void explicitDisableReason() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("merge-pdfs", DisableReason.DEPENDENCY);
+            EndpointAvailability availability = config.getEndpointAvailability("merge-pdfs");
+            assertFalse(availability.isEnabled());
+            assertEquals(DisableReason.DEPENDENCY, availability.getReason());
+        }
+
+        @Test
+        @DisplayName("default disableEndpoint reason is CONFIG")
+        void defaultDisableReasonIsConfig() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("merge-pdfs");
+            assertEquals(
+                    DisableReason.CONFIG, config.getEndpointAvailability("merge-pdfs").getReason());
+        }
+
+        @Test
+        @DisplayName("endpoint disabled via functional group reports the group's reason")
+        void functionalGroupReason() {
+            EndpointConfiguration config = buildDefault();
+            config.disableGroup("PageOps", DisableReason.DEPENDENCY);
+            EndpointAvailability availability = config.getEndpointAvailability("crop");
+            assertFalse(availability.isEnabled());
+            // crop is disabled both via group cascade and group membership; reason is DEPENDENCY
+            assertEquals(DisableReason.DEPENDENCY, availability.getReason());
+        }
+    }
+
+    @Nested
+    @DisplayName("getAllEndpoints")
+    class GetAllEndpointsTests {
+
+        @Test
+        @DisplayName("aggregates endpoints across all groups")
+        void aggregatesAcrossGroups() {
+            EndpointConfiguration config = buildDefault();
+            Set<String> all = config.getAllEndpoints();
+            assertTrue(all.contains("merge-pdfs"));
+            assertTrue(all.contains("compress-pdf"));
+            assertTrue(all.contains("ocr-pdf"));
+            assertFalse(all.isEmpty());
+        }
+
+        @Test
+        @DisplayName("custom endpoints registered after init appear in getAllEndpoints")
+        void includesCustomEndpoints() {
+            EndpointConfiguration config = buildDefault();
+            config.addEndpointToGroup("CustomGroup", "brand-new-endpoint");
+            assertTrue(config.getAllEndpoints().contains("brand-new-endpoint"));
+        }
+    }
+
+    @Nested
+    @DisplayName("environment / constructor driven configuration")
+    class EnvironmentConfigTests {
+
+        @Test
+        @DisplayName("url-to-pdf is disabled when enableUrlToPDF is false (default)")
+        void urlToPdfDisabledByDefault() {
+            EndpointConfiguration config = buildDefault();
+            assertFalse(config.isEndpointEnabled("url-to-pdf"));
+        }
+
+        @Test
+        @DisplayName("url-to-pdf stays enabled when enableUrlToPDF is true")
+        void urlToPdfEnabledWhenFlagSet() {
+            applicationProperties.getSystem().setEnableUrlToPDF(true);
+            EndpointConfiguration config = build(false);
+            assertTrue(config.isEndpointEnabled("url-to-pdf"));
+        }
+
+        @Test
+        @DisplayName("endpoints.toRemove disables the listed endpoints at construction")
+        void endpointsToRemove() {
+            applicationProperties
+                    .getEndpoints()
+                    .setToRemove(List.of(" merge-pdfs ", "split-pages"));
+            EndpointConfiguration config = build(false);
+            // values are trimmed before disabling
+            assertFalse(config.isEndpointEnabled("merge-pdfs"));
+            assertFalse(config.isEndpointEnabled("split-pages"));
+        }
+
+        @Test
+        @DisplayName("endpoints.groupsToRemove disables the listed groups at construction")
+        void groupsToRemove() {
+            applicationProperties.getEndpoints().setGroupsToRemove(List.of(" PageOps "));
+            EndpointConfiguration config = build(false);
+            assertTrue(config.getDisabledGroups().contains("PageOps"));
+            assertFalse(config.isEndpointEnabled("remove-pages"));
+        }
+
+        @Test
+        @DisplayName("non-pro build disables the enterprise group")
+        void nonProDisablesEnterprise() {
+            EndpointConfiguration config = build(false);
+            assertTrue(config.getDisabledGroups().contains("enterprise"));
+        }
+
+        @Test
+        @DisplayName("pro build does not disable the enterprise group")
+        void proDoesNotDisableEnterprise() {
+            EndpointConfiguration config = build(true);
+            assertFalse(config.getDisabledGroups().contains("enterprise"));
+        }
+    }
+
+    @Nested
+    @DisplayName("getEndpointStatuses (Lombok getter) and logging summary")
+    class MiscTests {
+
+        @Test
+        @DisplayName("getEndpointStatuses reflects explicit disable state")
+        void endpointStatusesReflectDisable() {
+            EndpointConfiguration config = buildDefault();
+            config.disableEndpoint("merge-pdfs");
+            assertEquals(Boolean.FALSE, config.getEndpointStatuses().get("merge-pdfs"));
+        }
+
+        @Test
+        @DisplayName("logDisabledEndpointsSummary runs without throwing")
+        void logSummaryDoesNotThrow() {
+            EndpointConfiguration config = buildDefault();
+            config.disableGroup("PageOps");
+            config.disableGroup("qpdf");
+            // purely a smoke test of the logging branch coverage
+            config.logDisabledEndpointsSummary();
+        }
+
+        @Test
+        @DisplayName("logDisabledEndpointsSummary runs when nothing is disabled")
+        void logSummaryNothingDisabled() {
+            applicationProperties.getSystem().setEnableUrlToPDF(true);
+            EndpointConfiguration config = build(true);
+            config.logDisabledEndpointsSummary();
+        }
+    }
+}

app/common/src/test/java/stirling/software/SPDF/pdf/parser/LineAlignmentTableParserTest.java

@@ -1,153 +0,0 @@
-package stirling.software.SPDF.pdf.parser;
-
-import static org.assertj.core.api.Assertions.assertThat;
-import static stirling.software.SPDF.pdf.parser.PdfModels.*;
-
-import java.util.List;
-
-import org.junit.jupiter.api.Test;
-
-/**
- * Unit tests for {@link LineAlignmentTableParser}, focused on the coincident-line merge logic and
- * column-grid construction.
- */
-class LineAlignmentTableParserTest {
-
-    private final LineAlignmentTableParser parser = new LineAlignmentTableParser();
-
-    // ── mergeCoincidentLines ─────────────────────────────────────────────────────────────────────
-
-    @Test
-    void mergeCoincidentLines_singleLine_unchanged() {
-        var lines = List.of(tokenized(rawLine(10f, 100f, "Revenue")));
-        assertThat(parser.mergeCoincidentLines(lines)).hasSize(1);
-    }
-
-    @Test
-    void mergeCoincidentLines_distinctYLines_unchanged() {
-        // Two lines at different y positions — must NOT be merged.
-        var lines =
-                List.of(
-                        tokenized(rawLine(10f, 100f, "Revenue")),
-                        tokenized(rawLine(10f, 115f, "Cost")));
-        assertThat(parser.mergeCoincidentLines(lines)).hasSize(2);
-    }
-
-    @Test
-    void mergeCoincidentLines_sameY_merged() {
-        // Simulates a financial-table row split by LineBuilder at the column gap:
-        //   label fragment at x=72  → "Revenue"
-        //   value fragment at x=350 → "1,234"
-        // Both have y=100. After merge they should form one TokenizedLine.
-        var label = rawLine(72f, 100f, "Revenue");
-        var value = rawLine(350f, 100f, "1,234");
-
-        var merged = parser.mergeCoincidentLines(List.of(tokenized(label), tokenized(value)));
-
-        assertThat(merged).hasSize(1);
-        // The merged line should contain tokens from both halves.
-        var tokens = merged.get(0).all();
-        assertThat(tokens.stream().map(t -> t.text()).toList())
-                .containsExactlyInAnyOrder("Revenue", "1,234");
-    }
-
-    @Test
-    void mergeCoincidentLines_sameY_mergedLineHasCorrectBounds() {
-        var label = rawLine(72f, 100f, "Revenue"); // 7 chars × 6pt = 42pt wide → right = 114
-        var value = rawLine(350f, 100f, "1,234"); // 5 chars × 6pt = 30pt wide → right = 380
-
-        var merged = parser.mergeCoincidentLines(List.of(tokenized(label), tokenized(value)));
-
-        var bounds = merged.get(0).line().bounds();
-        assertThat(bounds.x()).isEqualTo(72f);
-        assertThat(bounds.right()).isEqualTo(380f);
-    }
-
-    @Test
-    void mergeCoincidentLines_withinTolerance_merged() {
-        // Lines 1.5pt apart (within ROW_MERGE_TOLERANCE_PT = 2pt) should merge.
-        var a = rawLine(10f, 100.0f, "Alpha");
-        var b = rawLine(200f, 101.5f, "99");
-
-        var merged = parser.mergeCoincidentLines(List.of(tokenized(a), tokenized(b)));
-        assertThat(merged).hasSize(1);
-    }
-
-    @Test
-    void mergeCoincidentLines_beyondTolerance_notMerged() {
-        // Lines 3pt apart (beyond ROW_MERGE_TOLERANCE_PT = 2pt) should NOT merge.
-        var a = rawLine(10f, 100.0f, "Alpha");
-        var b = rawLine(200f, 103.0f, "99");
-
-        var merged = parser.mergeCoincidentLines(List.of(tokenized(a), tokenized(b)));
-        assertThat(merged).hasSize(2);
-    }
-
-    @Test
-    void mergeCoincidentLines_threeCoincident_allMerged() {
-        // Three fragments at the same y (e.g. wide financial table with two value columns).
-        var a = rawLine(72f, 100f, "Revenue");
-        var b = rawLine(300f, 100f, "1,234");
-        var c = rawLine(400f, 100f, "5,678");
-
-        var merged = parser.mergeCoincidentLines(List.of(tokenized(a), tokenized(b), tokenized(c)));
-        assertThat(merged).hasSize(1);
-        assertThat(merged.get(0).all()).hasSize(3);
-    }
-
-    @Test
-    void mergeCoincidentLines_coincidentPairFollowedByDistinctLine_twoGroups() {
-        var a = rawLine(72f, 100f, "Revenue");
-        var b = rawLine(350f, 100f, "1,234"); // same y as a → merges with a
-        var c = rawLine(10f, 115f, "Expenses"); // different y → stays separate
-
-        var merged = parser.mergeCoincidentLines(List.of(tokenized(a), tokenized(b), tokenized(c)));
-        assertThat(merged).hasSize(2);
-    }
-
-    @Test
-    void mergeCoincidentLines_numericAnchorStatus_correctAfterMerge() {
-        // After merging, the combined line should be an anchor (≥2 numeric tokens).
-        // "Revenue" alone → not an anchor. "1,234  567" alone → anchor.
-        // Merged → anchor with at least 2 numerics.
-        var label = rawLine(72f, 100f, "Revenue");
-        var values = rawLineMultiWord(350f, 100f, "1,234", 30f, "567", 30f);
-
-        var merged = parser.mergeCoincidentLines(List.of(tokenized(label), tokenized(values)));
-
-        assertThat(merged).hasSize(1);
-        assertThat(merged.get(0).isAnchor()).isTrue();
-    }
-
-    // ── helpers ──────────────────────────────────────────────────────────────────────────────────
-
-    /** Creates a RawLine with a single TextFragment of the given text at the given position. */
-    private static RawLine rawLine(float x, float y, String text) {
-        float width = text.length() * 6f; // ~6pt per char — rough but consistent
-        float height = 12f;
-        Bounds bounds = new Bounds(x, y, width, height);
-        TextFragment fragment =
-                new TextFragment("tf-test", text, bounds, y + height, 11f, "Helvetica", false);
-        return new RawLine("ln-test", List.of(fragment), bounds, 1);
-    }
-
-    /**
-     * Creates a RawLine with two TextFragments representing two words separated by a small gap.
-     * Used to simulate a values-only line with multiple numeric tokens.
-     */
-    private static RawLine rawLineMultiWord(
-            float x, float y, String word1, float w1, String word2, float w2) {
-        float height = 12f;
-        Bounds b1 = new Bounds(x, y, w1, height);
-        Bounds b2 = new Bounds(x + w1 + 5f, y, w2, height);
-        TextFragment f1 = new TextFragment("tf-1", word1, b1, y + height, 11f, "Helvetica", false);
-        TextFragment f2 = new TextFragment("tf-2", word2, b2, y + height, 11f, "Helvetica", false);
-        Bounds lineBounds = new Bounds(x, y, x + w1 + 5f + w2 - x, height);
-        return new RawLine("ln-test", List.of(f1, f2), lineBounds, 1);
-    }
-
-    /** Tokenises a RawLine via the parser's own tokenise logic (package-private access). */
-    private LineAlignmentTableParser.TokenizedLine tokenized(RawLine line) {
-        return parser.tokenize(line);
-    }
-}

app/common/src/test/java/stirling/software/SPDF/pdf/parser/PageColumnLayoutTest.java

@@ -0,0 +1,149 @@
+package stirling.software.SPDF.pdf.parser;
+
+import static org.assertj.core.api.Assertions.assertThat;
+
+import java.util.ArrayList;
+import java.util.List;
+
+import org.junit.jupiter.api.Test;
+
+/** Unit tests for {@link PageColumnLayout} gutter detection and column classification. */
+class PageColumnLayoutTest {
+
+    private static final float PAGE_WIDTH = 612f; // Letter portrait
+
+    // ── single-column ────────────────────────────────────────────────────────────────────────────
+
+    @Test
+    void singleColumn_oneColumnNoGutters() {
+        List<float[]> lines = List.of(lineBox(72f, 396f));
+
+        PageColumnLayout layout = PageColumnLayout.fromLineBoxes(lines, PAGE_WIDTH);
+
+        assertThat(layout.columnCount()).isEqualTo(1);
+        assertThat(layout.gutters()).isEmpty();
+    }
+
+    @Test
+    void singleColumn_classifyAnchor_returnsZero() {
+        PageColumnLayout layout =
+                PageColumnLayout.fromLineBoxes(List.of(lineBox(72f, 396f)), PAGE_WIDTH);
+
+        assertThat(layout.columnOf(100f, 200f)).isEqualTo(0);
+    }
+
+    // ── two-column ───────────────────────────────────────────────────────────────────────────────
+
+    @Test
+    void twoColumn_detectsGutter() {
+        PageColumnLayout layout =
+                PageColumnLayout.fromLineBoxes(buildTwoColumnLines(3), PAGE_WIDTH);
+
+        assertThat(layout.columnCount()).isEqualTo(2);
+        assertThat(layout.gutters()).hasSize(1);
+        float[] gutter = layout.gutters().get(0);
+        // Gutter is centered on pageWidth/2 with PageColumnLayout.MIDPOINT_SLACK_PT slack each
+        // side.
+        float pageMid = PAGE_WIDTH / 2f;
+        assertThat(gutter[0]).isBetween(pageMid - 40f, pageMid - 20f);
+        assertThat(gutter[1]).isBetween(pageMid + 20f, pageMid + 40f);
+    }
+
+    @Test
+    void twoColumn_classifyLeftAndRightAnchors() {
+        PageColumnLayout layout =
+                PageColumnLayout.fromLineBoxes(buildTwoColumnLines(3), PAGE_WIDTH);
+        assertThat(layout.columnOf(100f, 200f)).isEqualTo(0);
+        assertThat(layout.columnOf(380f, 460f)).isEqualTo(1);
+    }
+
+    @Test
+    void twoColumn_columnsCrossing_leftLineOnlyHitsLeft() {
+        PageColumnLayout layout =
+                PageColumnLayout.fromLineBoxes(buildTwoColumnLines(3), PAGE_WIDTH);
+        assertThat(layout.columnsCrossing(72f, 280f)).containsExactly(0);
+        assertThat(layout.columnsCrossing(320f, 540f)).containsExactly(1);
+    }
+
+    @Test
+    void twoColumn_spanningLine_returnsBothColumns() {
+        List<float[]> lines = new ArrayList<>(buildTwoColumnLines(3));
+        // Full-width header that crosses pageWidth/2.
+        lines.add(lineBox(72f, 396f));
+
+        PageColumnLayout layout = PageColumnLayout.fromLineBoxes(lines, PAGE_WIDTH);
+
+        assertThat(layout.columnsCrossing(72f, 540f)).containsExactly(0, 1);
+        assertThat(layout.columnsCrossing(72f, 280f)).containsExactly(0);
+    }
+
+    private static List<float[]> buildTwoColumnLines(int rowsPerColumn) {
+        List<float[]> lines = new ArrayList<>();
+        for (int i = 0; i < rowsPerColumn; i++) {
+            lines.add(lineBox(72f, 136f)); // left column body (72..208)
+            lines.add(lineBox(320f, 220f)); // right column body (320..540)
+        }
+        return lines;
+    }
+
+    // ── three-column ─────────────────────────────────────────────────────────────────────────────
+
+    @Test
+    void threeColumn_collapsesToLeftRightSplit() {
+        // The midpoint-based detector splits the page at pageWidth/2 and treats anything else as
+        // single-column or spanning. A genuine 3-column layout collapses to 2 columns; the middle
+        // column's content ends up classified by midpoint as left or right of pageMid.
+        List<float[]> lines = new ArrayList<>();
+        for (int i = 0; i < 6; i++) {
+            lines.add(lineBox(72f, 150f)); // 72..222
+            lines.add(lineBox(252f, 150f)); // 252..402
+            lines.add(lineBox(432f, 150f)); // 432..582
+        }
+
+        PageColumnLayout layout = PageColumnLayout.fromLineBoxes(lines, PAGE_WIDTH);
+
+        assertThat(layout.columnCount()).isEqualTo(2);
+        assertThat(layout.gutters()).hasSize(1);
+    }
+
+    // ── empty page ───────────────────────────────────────────────────────────────────────────────
+
+    @Test
+    void emptyPage_singleColumnFallback() {
+        PageColumnLayout layout = PageColumnLayout.fromLineBoxes(List.of(), PAGE_WIDTH);
+        assertThat(layout.columnCount()).isEqualTo(1);
+        assertThat(layout.gutters()).isEmpty();
+    }
+
+    @Test
+    void onlyShortFragments_singleColumnFallback() {
+        // Page numbers / decorations — too narrow to vote either side.
+        List<float[]> lines = List.of(lineBox(300f, 6f));
+        PageColumnLayout layout = PageColumnLayout.fromLineBoxes(lines, PAGE_WIDTH);
+        assertThat(layout.columnCount()).isEqualTo(1);
+    }
+
+    // ── narrow gap should not be confused for a gutter ───────────────────────────────────────────
+
+    @Test
+    void narrowInternalGap_doesNotProduceGutter() {
+        // Both halves sit left of the page midpoint, so no line votes for a right column and
+        // detection falls back to single-column.
+        List<float[]> lines = new ArrayList<>();
+        lines.add(lineBox(72f, 100f));
+        lines.add(lineBox(180f, 100f));
+        for (int i = 0; i < 5; i++) {
+            lines.add(lineBox(72f, 208f));
+        }
+
+        PageColumnLayout layout = PageColumnLayout.fromLineBoxes(lines, PAGE_WIDTH);
+        assertThat(layout.columnCount()).isEqualTo(1);
+    }
+
+    // ── helpers ──────────────────────────────────────────────────────────────────────────────────
+
+    /** Builds a line bounding box {@code [x1, 0, x1+width, 0]}; Y is unused by detection. */
+    private static float[] lineBox(float x1, float width) {
+        return new float[] {x1, 0f, x1 + width, 0f};
+    }
+}

app/common/src/test/java/stirling/software/SPDF/pdf/parser/TabulaTableParserGapTest.java

@@ -0,0 +1,345 @@
+package stirling.software.SPDF.pdf.parser;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertNotNull;
+import static org.junit.jupiter.api.Assertions.assertSame;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+import static stirling.software.SPDF.pdf.parser.PdfModels.RawPage;
+import static stirling.software.SPDF.pdf.parser.PdfModels.TableCell;
+import static stirling.software.SPDF.pdf.parser.PdfModels.TableFragment;
+import static stirling.software.SPDF.pdf.parser.PdfModels.TableRow;
+
+import java.awt.Color;
+import java.io.ByteArrayOutputStream;
+import java.util.List;
+
+import org.apache.pdfbox.Loader;
+import org.apache.pdfbox.pdmodel.PDDocument;
+import org.apache.pdfbox.pdmodel.PDPage;
+import org.apache.pdfbox.pdmodel.PDPageContentStream;
+import org.apache.pdfbox.pdmodel.common.PDRectangle;
+import org.apache.pdfbox.pdmodel.font.PDType1Font;
+import org.apache.pdfbox.pdmodel.font.Standard14Fonts;
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Nested;
+import org.junit.jupiter.api.Test;
+
+/**
+ * Unit tests for {@link TabulaTableParser}. Tables are built in-memory with PDFBox so the tests are
+ * deterministic and need no fixtures, network, or external processes.
+ */
+class TabulaTableParserGapTest {
+
+    private final TabulaTableParser parser = new TabulaTableParser();
+
+    // ── error / empty branches ───────────────────────────────────────────────
+
+    @Nested
+    @DisplayName("Empty and error branches")
+    class EmptyAndErrorBranches {
+
+        @Test
+        @DisplayName("page number 0 is out of Tabula's 1-based range -> empty list, no throw")
+        void pageNumberZeroReturnsEmpty() throws Exception {
+            byte[] pdf = pdfWithText(new String[] {"hello"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> result = parser.parse(doc, 0);
+                assertNotNull(result);
+                assertTrue(result.isEmpty());
+            }
+        }
+
+        @Test
+        @DisplayName("page number beyond the document -> empty list, exception swallowed")
+        void pageNumberOutOfRangeReturnsEmpty() throws Exception {
+            byte[] pdf = pdfWithText(new String[] {"hello"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> result = parser.parse(doc, 99);
+                assertNotNull(result);
+                assertTrue(result.isEmpty());
+            }
+        }
+
+        @Test
+        @DisplayName("negative page number -> empty list")
+        void negativePageNumberReturnsEmpty() throws Exception {
+            byte[] pdf = pdfWithText(new String[] {"hello"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                assertTrue(parser.parse(doc, -5).isEmpty());
+            }
+        }
+
+        @Test
+        @DisplayName("lattice mode on a page with no ruled lines -> no tables")
+        void latticeWithNoRulingsReturnsEmpty() throws Exception {
+            byte[] pdf = pdfWithText(new String[] {"just some prose", "no table here"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> result = parser.parse(doc, new RawPage(1, 0f, 0f, List.of()));
+                assertNotNull(result);
+                assertTrue(
+                        result.isEmpty(), "borderless text must not be detected in lattice mode");
+            }
+        }
+
+        @Test
+        @DisplayName("blank page in lattice mode -> empty list")
+        void blankPageLatticeReturnsEmpty() throws Exception {
+            byte[] pdf = blankPdf();
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                assertTrue(parser.parse(doc, new RawPage(1, 0f, 0f, List.of())).isEmpty());
+            }
+        }
+    }
+
+    // ── stream mode (BasicExtractionAlgorithm) ───────────────────────────────
+
+    @Nested
+    @DisplayName("Stream mode")
+    class StreamMode {
+
+        @Test
+        @DisplayName("page with text yields at least one well-formed fragment")
+        void streamOnTextProducesFragment() throws Exception {
+            byte[] pdf =
+                    pdfWithText(new String[] {"Name Age City", "Alice 30 Paris", "Bob 25 Rome"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> fragments =
+                        parser.parseStream(doc, new RawPage(1, 0f, 0f, List.of()));
+                assertNotNull(fragments);
+                assertFalse(fragments.isEmpty(), "stream mode always builds a table from text");
+                assertFragmentWellFormed(fragments.get(0), 1, 0);
+            }
+        }
+
+        @Test
+        @DisplayName("fragment ids encode page and index")
+        void streamFragmentIdFormat() throws Exception {
+            byte[] pdf = pdfWithText(new String[] {"col1 col2", "a b"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> fragments =
+                        parser.parseStream(doc, new RawPage(1, 0f, 0f, List.of()));
+                assertFalse(fragments.isEmpty());
+                assertEquals("tbl-p1-0", fragments.get(0).tableId());
+                assertEquals(1, fragments.get(0).pageNumber());
+            }
+        }
+
+        @Test
+        @DisplayName("rawRows and the parsed rows stay in lockstep")
+        void streamRowsMatchRawRows() throws Exception {
+            byte[] pdf = pdfWithText(new String[] {"x y", "1 2", "3 4"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> fragments =
+                        parser.parseStream(doc, new RawPage(1, 0f, 0f, List.of()));
+                assertFalse(fragments.isEmpty());
+                TableFragment f = fragments.get(0);
+                assertEquals(f.rawRows().size(), f.rows().size());
+            }
+        }
+    }
+
+    // ── lattice mode with a real bordered grid ───────────────────────────────
+
+    @Nested
+    @DisplayName("Lattice mode")
+    class LatticeMode {
+
+        @Test
+        @DisplayName("bordered grid is detected and produces well-formed fragments")
+        void latticeDetectsBorderedTable() throws Exception {
+            byte[] pdf = pdfWithGrid();
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> fragments =
+                        parser.parse(doc, new RawPage(1, 0f, 0f, List.of()));
+                assertNotNull(fragments);
+                assertFalse(
+                        fragments.isEmpty(), "a clean ruled grid must be detected in lattice mode");
+                TableFragment f = fragments.get(0);
+                assertFragmentWellFormed(f, 1, 0);
+                assertTrue(f.columnCount() >= 1, "a detected grid must have at least one column");
+                assertFalse(f.rawRows().isEmpty(), "a detected grid must have rows");
+            }
+        }
+
+        @Test
+        @DisplayName("convenience overload with page number routes to lattice mode")
+        void parseByPageNumberDetectsGrid() throws Exception {
+            byte[] pdf = pdfWithGrid();
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> fragments = parser.parse(doc, 1);
+                assertNotNull(fragments);
+                assertFalse(fragments.isEmpty());
+                assertEquals(1, fragments.get(0).pageNumber());
+            }
+        }
+
+        @Test
+        @DisplayName("cell text is normalised (trimmed, newlines collapsed)")
+        void latticeCellTextIsNormalised() throws Exception {
+            byte[] pdf = pdfWithGrid();
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                List<TableFragment> fragments =
+                        parser.parse(doc, new RawPage(1, 0f, 0f, List.of()));
+                assertFalse(fragments.isEmpty());
+                for (List<String> row : fragments.get(0).rawRows()) {
+                    for (String cell : row) {
+                        assertNotNull(cell);
+                        assertFalse(cell.contains("\n"), "newlines must be collapsed");
+                        assertFalse(cell.contains("\r"), "carriage returns must be collapsed");
+                        assertEquals(cell.trim(), cell, "cell text must be trimmed");
+                    }
+                }
+            }
+        }
+    }
+
+    // ── contract invariants ──────────────────────────────────────────────────
+
+    @Nested
+    @DisplayName("Contract invariants")
+    class ContractInvariants {
+
+        @Test
+        @DisplayName("parse never returns null")
+        void parseNeverReturnsNull() throws Exception {
+            byte[] pdf = pdfWithText(new String[] {"abc"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                assertNotNull(parser.parse(doc, new RawPage(1, 0f, 0f, List.of())));
+                assertNotNull(parser.parse(doc, 1));
+                assertNotNull(parser.parseStream(doc, new RawPage(1, 0f, 0f, List.of())));
+            }
+        }
+
+        @Test
+        @DisplayName("the document is not closed by the parser")
+        void documentRemainsOpenAfterParse() throws Exception {
+            byte[] pdf = pdfWithText(new String[] {"keep me open"});
+            try (PDDocument doc = Loader.loadPDF(pdf)) {
+                parser.parse(doc, new RawPage(1, 0f, 0f, List.of()));
+                parser.parseStream(doc, new RawPage(1, 0f, 0f, List.of()));
+                // ObjectExtractor.close() would close the underlying COSDocument; the parser must
+                // not.
+                assertFalse(
+                        doc.getDocument().isClosed(),
+                        "parser must not close the caller's document");
+                assertEquals(1, doc.getNumberOfPages());
+            }
+        }
+    }
+
+    // ── helpers ──────────────────────────────────────────────────────────────
+
+    /** Asserts every field of a fragment satisfies the documented contract. */
+    private static void assertFragmentWellFormed(
+            TableFragment f, int expectedPage, int expectedIndex) {
+        assertNotNull(f);
+        assertEquals(expectedPage, f.pageNumber());
+        assertEquals("tbl-p" + expectedPage + "-" + expectedIndex, f.tableId());
+        assertNotNull(f.bounds());
+        assertNotNull(f.headers());
+        assertTrue(f.headers().isEmpty(), "headers are deferred to v2 and must be empty");
+        assertNotNull(f.rows());
+        assertNotNull(f.rawRows());
+        assertNotNull(f.warnings());
+        assertSame(null, f.continuedFromPage(), "continuedFromPage is deferred to v2");
+        assertTrue(f.columnCount() >= 0);
+        assertTrue(f.confidence() >= 0f && f.confidence() <= 1f, "confidence must be within [0,1]");
+        assertEquals(f.rawRows().size(), f.rows().size());
+
+        for (TableRow row : f.rows()) {
+            assertNotNull(row.cells());
+            for (TableCell cell : row.cells()) {
+                assertNotNull(cell.text());
+                assertNotNull(cell.bounds());
+                assertEquals(1, cell.colSpan(), "colSpan is always 1 in v1");
+                assertEquals(1, cell.rowSpan(), "rowSpan is always 1 in v1");
+            }
+        }
+    }
+
+    private static byte[] pdfWithText(String[] lines) throws Exception {
+        try (PDDocument doc = new PDDocument()) {
+            PDPage page = new PDPage(PDRectangle.A4);
+            doc.addPage(page);
+            try (PDPageContentStream cs = new PDPageContentStream(doc, page)) {
+                cs.setFont(new PDType1Font(Standard14Fonts.FontName.HELVETICA), 12);
+                cs.setNonStrokingColor(Color.BLACK);
+                float y = 720f;
+                for (String line : lines) {
+                    cs.beginText();
+                    cs.newLineAtOffset(72f, y);
+                    cs.showText(line);
+                    cs.endText();
+                    y -= 20f;
+                }
+            }
+            return save(doc);
+        }
+    }
+
+    private static byte[] blankPdf() throws Exception {
+        try (PDDocument doc = new PDDocument()) {
+            doc.addPage(new PDPage(PDRectangle.A4));
+            return save(doc);
+        }
+    }
+
+    /**
+     * Builds a small 3-row x 3-column ruled grid with text in each cell. The ruled lines make the
+     * table detectable by lattice mode.
+     */
+    private static byte[] pdfWithGrid() throws Exception {
+        try (PDDocument doc = new PDDocument()) {
+            PDPage page = new PDPage(PDRectangle.A4);
+            doc.addPage(page);
+
+            float left = 100f;
+            float right = 400f;
+            float top = 700f;
+            float bottom = 550f;
+            int cols = 3;
+            int rows = 3;
+            float colStep = (right - left) / cols;
+            float rowStep = (top - bottom) / rows;
+
+            try (PDPageContentStream cs = new PDPageContentStream(doc, page)) {
+                cs.setStrokingColor(Color.BLACK);
+                cs.setLineWidth(1f);
+
+                // vertical lines
+                for (int c = 0; c <= cols; c++) {
+                    float x = left + c * colStep;
+                    cs.moveTo(x, bottom);
+                    cs.lineTo(x, top);
+                }
+                // horizontal lines
+                for (int r = 0; r <= rows; r++) {
+                    float yLine = bottom + r * rowStep;
+                    cs.moveTo(left, yLine);
+                    cs.lineTo(right, yLine);
+                }
+                cs.stroke();
+
+                // cell text
+                cs.setFont(new PDType1Font(Standard14Fonts.FontName.HELVETICA), 10);
+                cs.setNonStrokingColor(Color.BLACK);
+                for (int r = 0; r < rows; r++) {
+                    for (int c = 0; c < cols; c++) {
+                        cs.beginText();
+                        cs.newLineAtOffset(left + c * colStep + 5f, top - (r + 1) * rowStep + 6f);
+                        cs.showText("R" + r + "C" + c);
+                        cs.endText();
+                    }
+                }
+            }
+            return save(doc);
+        }
+    }
+
+    private static byte[] save(PDDocument doc) throws Exception {
+        ByteArrayOutputStream baos = new ByteArrayOutputStream();
+        doc.save(baos);
+        return baos.toByteArray();
+    }
+}

app/common/src/test/java/stirling/software/common/cluster/inprocess/InProcessDistributedLockTest.java

@@ -24,7 +24,9 @@ class InProcessDistributedLockTest {
     }
 
     @Test
-    void reentryFromSameThreadFails() {
+    void reentryFromSameThreadFails_parityWithValkey() {
+        // The Valkey impl refuses reentry (SET NX semantics); the in-process impl must match,
+        // otherwise code working in single-instance silently breaks in cluster mode.
         DistributedLock lock = new InProcessDistributedLock();
         DistributedLock.LockHandle h1 = lock.tryAcquire("k", Duration.ofSeconds(30)).orElseThrow();
         Optional<DistributedLock.LockHandle> reentry = lock.tryAcquire("k", Duration.ofSeconds(30));

app/common/src/test/java/stirling/software/common/cluster/inprocess/LocalDiskFileStoreTest.java

@@ -3,11 +3,13 @@ package stirling.software.common.cluster.inprocess;
 import static org.junit.jupiter.api.Assertions.assertArrayEquals;
 import static org.junit.jupiter.api.Assertions.assertEquals;
 import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertNull;
 import static org.junit.jupiter.api.Assertions.assertThrows;
 import static org.junit.jupiter.api.Assertions.assertTrue;
 
 import java.io.ByteArrayInputStream;
 import java.io.IOException;
+import java.nio.file.Files;
 import java.nio.file.Path;
 
 import org.junit.jupiter.api.Test;
@@ -39,4 +41,46 @@ class LocalDiskFileStoreTest {
         assertThrows(IllegalArgumentException.class, () -> store.resolve("a/b"));
         assertThrows(IllegalArgumentException.class, () -> store.resolve("a\\b"));
     }
+
+    @Test
+    void ownerSidecarCannotBeReadAsFileId(@TempDir Path dir) throws IOException {
+        LocalDiskFileStore store = new LocalDiskFileStore(dir.toString());
+        FileStore.Stored stored =
+                store.store(new ByteArrayInputStream("hi".getBytes()), "f.bin", "alice");
+        String sidecarId = stored.fileId() + ".owner";
+        assertThrows(IllegalArgumentException.class, () -> store.resolve(sidecarId));
+        assertThrows(IllegalArgumentException.class, () -> store.retrieveBytes(sidecarId));
+    }
+
+    @Test
+    void ownerIsPersistedAndReturnedByGetOwner(@TempDir Path dir) throws IOException {
+        LocalDiskFileStore store = new LocalDiskFileStore(dir.toString());
+        FileStore.Stored stored =
+                store.store(new ByteArrayInputStream("hi".getBytes()), "f.bin", "alice");
+        assertEquals("alice", store.getOwner(stored.fileId()));
+    }
+
+    @Test
+    void getOwnerReturnsNullWhenNoOwnerWasRecorded(@TempDir Path dir) throws IOException {
+        LocalDiskFileStore store = new LocalDiskFileStore(dir.toString());
+        FileStore.Stored stored =
+                store.store(new ByteArrayInputStream("hi".getBytes()), "f.bin", null);
+        assertNull(store.getOwner(stored.fileId()));
+    }
+
+    @Test
+    void getOwnerReturnsNullForUnknownFileId(@TempDir Path dir) throws IOException {
+        LocalDiskFileStore store = new LocalDiskFileStore(dir.toString());
+        assertNull(store.getOwner("00000000-0000-0000-0000-000000000000"));
+    }
+
+    @Test
+    void deleteRemovesOwnerSidecar(@TempDir Path dir) throws IOException {
+        LocalDiskFileStore store = new LocalDiskFileStore(dir.toString());
+        FileStore.Stored stored =
+                store.store(new ByteArrayInputStream("hi".getBytes()), "f.bin", "alice");
+        assertTrue(store.delete(stored.fileId()));
+        assertFalse(Files.exists(dir.resolve(stored.fileId() + ".owner")));
+        assertNull(store.getOwner(stored.fileId()));
+    }
 }

app/common/src/test/java/stirling/software/common/configuration/ConfigInitializerTest.java

@@ -0,0 +1,95 @@
+package stirling.software.common.configuration;
+
+import static org.junit.jupiter.api.Assertions.*;
+
+import org.junit.jupiter.api.Test;
+import org.snakeyaml.engine.v2.api.LoadSettings;
+
+import stirling.software.common.util.YamlHelper;
+
+class ConfigInitializerTest {
+
+    private static final LoadSettings LOAD_SETTINGS =
+            LoadSettings.builder()
+                    .setUseMarks(true)
+                    .setMaxAliasesForCollections(Integer.MAX_VALUE)
+                    .setAllowRecursiveKeys(true)
+                    .setParseComments(true)
+                    .build();
+
+    // Mirrors the proFeatures block of settings.yml.template after the camelCase rename.
+    private static final String CAMEL_CASE_TEMPLATE =
+            """
+            premium:
+              proFeatures:
+                ssoAutoLogin: false
+                customMetadata:
+                  autoUpdateMetadata: false
+                  author: username
+                  creator: Stirling-PDF
+                  producer: Stirling-PDF
+            """;
+
+    @Test
+    void migrateProFeaturesKeyCasing_carriesForwardLegacyPascalCaseValues() {
+        // An existing install whose settings.yml still uses the old PascalCase keys.
+        String legacy =
+                """
+                premium:
+                  proFeatures:
+                    SSOAutoLogin: true
+                    CustomMetadata:
+                      autoUpdateMetadata: true
+                      author: alice
+                      creator: bob
+                      producer: carol
+                """;
+        YamlHelper template = new YamlHelper(LOAD_SETTINGS, CAMEL_CASE_TEMPLATE);
+        YamlHelper existing = new YamlHelper(LOAD_SETTINGS, legacy);
+
+        new ConfigInitializer().migrateProFeaturesKeyCasing(existing, template);
+
+        assertEquals(
+                "true", template.getValueByExactKeyPath("premium", "proFeatures", "ssoAutoLogin"));
+        assertEquals(
+                "true",
+                template.getValueByExactKeyPath(
+                        "premium", "proFeatures", "customMetadata", "autoUpdateMetadata"));
+        assertEquals(
+                "alice",
+                template.getValueByExactKeyPath(
+                        "premium", "proFeatures", "customMetadata", "author"));
+        assertEquals(
+                "bob",
+                template.getValueByExactKeyPath(
+                        "premium", "proFeatures", "customMetadata", "creator"));
+        assertEquals(
+                "carol",
+                template.getValueByExactKeyPath(
+                        "premium", "proFeatures", "customMetadata", "producer"));
+    }
+
+    @Test
+    void migrateProFeaturesKeyCasing_withoutLegacyKeys_keepsTemplateDefaults() {
+        // No PascalCase keys present -> this migration step must be a no-op.
+        String alreadyCamel =
+                """
+                premium:
+                  proFeatures:
+                    ssoAutoLogin: true
+                    customMetadata:
+                      author: dave
+                """;
+        YamlHelper template = new YamlHelper(LOAD_SETTINGS, CAMEL_CASE_TEMPLATE);
+        YamlHelper existing = new YamlHelper(LOAD_SETTINGS, alreadyCamel);
+
+        new ConfigInitializer().migrateProFeaturesKeyCasing(existing, template);
+
+        assertEquals(
+                "false", template.getValueByExactKeyPath("premium", "proFeatures", "ssoAutoLogin"));
+        assertEquals(
+                "username",
+                template.getValueByExactKeyPath(
+                        "premium", "proFeatures", "customMetadata", "author"));
+    }
+}

app/common/src/test/java/stirling/software/common/configuration/RuntimePathConfigTest.java

@@ -0,0 +1,520 @@
+package stirling.software.common.configuration;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertNotNull;
+import static org.junit.jupiter.api.Assertions.assertSame;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+import java.nio.file.Path;
+import java.util.ArrayList;
+import java.util.Arrays;
+import java.util.List;
+
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Nested;
+import org.junit.jupiter.api.Test;
+
+import stirling.software.common.model.ApplicationProperties;
+import stirling.software.common.model.ApplicationProperties.CustomPaths.Operations;
+import stirling.software.common.model.ApplicationProperties.CustomPaths.Pipeline;
+import stirling.software.common.model.ApplicationProperties.ProcessExecutor.UnoServerEndpoint;
+
+/**
+ * Unit tests for {@link RuntimePathConfig}. All of the resolution logic lives in the constructor,
+ * so each test builds a real {@link ApplicationProperties} (a plain @Data POJO with sensible
+ * defaults), constructs the config, and asserts on the exposed getters.
+ */
+class RuntimePathConfigTest {
+
+    /** The base path the production code derives from {@link InstallationPathConfig#getPath()}. */
+    private static final String BASE_PATH = InstallationPathConfig.getPath();
+
+    private static ApplicationProperties newProperties() {
+        return new ApplicationProperties();
+    }
+
+    private static RuntimePathConfig build(ApplicationProperties properties) {
+        return new RuntimePathConfig(properties);
+    }
+
+    @Nested
+    @DisplayName("Pipeline directory resolution")
+    class PipelinePaths {
+
+        @Test
+        @DisplayName("Defaults to <basePath>/pipeline and derived sub-folders")
+        void defaultPipelinePaths() {
+            RuntimePathConfig config = build(newProperties());
+
+            String expectedPipeline = Path.of(BASE_PATH, "pipeline").toString();
+            assertEquals(expectedPipeline, config.getPipelinePath());
+            // Watched folders are resolved to an absolute, normalized path by the production code.
+            assertEquals(
+                    Path.of(expectedPipeline, "watchedFolders")
+                            .toAbsolutePath()
+                            .normalize()
+                            .toString(),
+                    config.getPipelineWatchedFoldersPath());
+            assertEquals(
+                    Path.of(expectedPipeline, "finishedFolders").toString(),
+                    config.getPipelineFinishedFoldersPath());
+            assertEquals(
+                    Path.of(expectedPipeline, "defaultWebUIConfigs").toString(),
+                    config.getPipelineDefaultWebUiConfigs());
+        }
+
+        @Test
+        @DisplayName("Custom pipelineDir overrides the default pipeline path")
+        void customPipelineDir() {
+            ApplicationProperties properties = newProperties();
+            Pipeline pipeline = properties.getSystem().getCustomPaths().getPipeline();
+            pipeline.setPipelineDir("/custom/pipeline");
+
+            RuntimePathConfig config = build(properties);
+
+            assertEquals("/custom/pipeline", config.getPipelinePath());
+            // Sub-folders are derived from the (already-resolved) custom pipeline path.
+            assertEquals(
+                    Path.of("/custom/pipeline", "finishedFolders").toString(),
+                    config.getPipelineFinishedFoldersPath());
+            assertEquals(
+                    Path.of("/custom/pipeline", "defaultWebUIConfigs").toString(),
+                    config.getPipelineDefaultWebUiConfigs());
+        }
+
+        @Test
+        @DisplayName("Blank pipelineDir falls back to the default")
+        void blankPipelineDirFallsBackToDefault() {
+            ApplicationProperties properties = newProperties();
+            properties.getSystem().getCustomPaths().getPipeline().setPipelineDir("   ");
+
+            RuntimePathConfig config = build(properties);
+
+            assertEquals(Path.of(BASE_PATH, "pipeline").toString(), config.getPipelinePath());
+        }
+
+        @Test
+        @DisplayName("Custom finished and webUI configs dirs override defaults")
+        void customFinishedAndWebUiDirs() {
+            ApplicationProperties properties = newProperties();
+            Pipeline pipeline = properties.getSystem().getCustomPaths().getPipeline();
+            pipeline.setFinishedFoldersDir("/custom/finished");
+            pipeline.setWebUIConfigsDir("/custom/webui");
+
+            RuntimePathConfig config = build(properties);
+
+            assertEquals("/custom/finished", config.getPipelineFinishedFoldersPath());
+            assertEquals("/custom/webui", config.getPipelineDefaultWebUiConfigs());
+        }
+    }
+
+    @Nested
+    @DisplayName("Watched folder resolution")
+    class WatchedFolders {
+
+        @Test
+        @DisplayName("Default watched folder is <pipeline>/watchedFolders and list has one entry")
+        void defaultWatchedFolder() {
+            RuntimePathConfig config = build(newProperties());
+
+            // Watched folders are resolved to an absolute, normalized path by the production code.
+            String expected =
+                    Path.of(Path.of(BASE_PATH, "pipeline").toString(), "watchedFolders")
+                            .toAbsolutePath()
+                            .normalize()
+                            .toString();
+            assertEquals(expected, config.getPipelineWatchedFoldersPath());
+            assertEquals(1, config.getPipelineWatchedFoldersPaths().size());
+            assertEquals(expected, config.getPipelineWatchedFoldersPaths().get(0));
+        }
+
+        @Test
+        @DisplayName("Legacy single watchedFoldersDir is used when no list is provided")
+        void legacyWatchedFolder() {
+            ApplicationProperties properties = newProperties();
+            properties
+                    .getSystem()
+                    .getCustomPaths()
+                    .getPipeline()
+                    .setWatchedFoldersDir("relativeWatched");
+
+            RuntimePathConfig config = build(properties);
+
+            // Legacy paths are normalized to absolute.
+            String expected = Path.of("relativeWatched").toAbsolutePath().normalize().toString();
+            assertEquals(1, config.getPipelineWatchedFoldersPaths().size());
+            assertEquals(expected, config.getPipelineWatchedFoldersPath());
+        }
+
+        @Test
+        @DisplayName("New list config takes precedence over the legacy single dir")
+        void listTakesPrecedenceOverLegacy() {
+            ApplicationProperties properties = newProperties();
+            Pipeline pipeline = properties.getSystem().getCustomPaths().getPipeline();
+            pipeline.setWatchedFoldersDir("legacyDir");
+            pipeline.setWatchedFoldersDirs(new ArrayList<>(Arrays.asList("listDirA", "listDirB")));
+
+            RuntimePathConfig config = build(properties);
+
+            List<String> paths = config.getPipelineWatchedFoldersPaths();
+            assertEquals(2, paths.size());
+            assertEquals(Path.of("listDirA").toAbsolutePath().normalize().toString(), paths.get(0));
+            assertEquals(Path.of("listDirB").toAbsolutePath().normalize().toString(), paths.get(1));
+            // The legacy value must NOT appear when the list is present.
+            assertFalse(
+                    paths.contains(Path.of("legacyDir").toAbsolutePath().normalize().toString()));
+        }
+
+        @Test
+        @DisplayName("Duplicate paths in the list are de-duplicated after normalization")
+        void duplicatePathsAreDeduplicated() {
+            ApplicationProperties properties = newProperties();
+            properties
+                    .getSystem()
+                    .getCustomPaths()
+                    .getPipeline()
+                    .setWatchedFoldersDirs(
+                            new ArrayList<>(Arrays.asList("dupDir", "dupDir", "otherDir")));
+
+            RuntimePathConfig config = build(properties);
+
+            List<String> paths = config.getPipelineWatchedFoldersPaths();
+            assertEquals(2, paths.size());
+            assertEquals(Path.of("dupDir").toAbsolutePath().normalize().toString(), paths.get(0));
+            assertEquals(Path.of("otherDir").toAbsolutePath().normalize().toString(), paths.get(1));
+        }
+
+        @Test
+        @DisplayName("Blank and whitespace-only list entries are sanitized out")
+        void blankListEntriesAreFiltered() {
+            ApplicationProperties properties = newProperties();
+            properties
+                    .getSystem()
+                    .getCustomPaths()
+                    .getPipeline()
+                    .setWatchedFoldersDirs(
+                            new ArrayList<>(Arrays.asList("  ", "", "validDir", "   ")));
+
+            RuntimePathConfig config = build(properties);
+
+            List<String> paths = config.getPipelineWatchedFoldersPaths();
+            assertEquals(1, paths.size());
+            assertEquals(Path.of("validDir").toAbsolutePath().normalize().toString(), paths.get(0));
+        }
+
+        @Test
+        @DisplayName("List entries are trimmed before resolution")
+        void listEntriesAreTrimmed() {
+            ApplicationProperties properties = newProperties();
+            properties
+                    .getSystem()
+                    .getCustomPaths()
+                    .getPipeline()
+                    .setWatchedFoldersDirs(new ArrayList<>(Arrays.asList("  spacedDir  ")));
+
+            RuntimePathConfig config = build(properties);
+
+            assertEquals(
+                    Path.of("spacedDir").toAbsolutePath().normalize().toString(),
+                    config.getPipelineWatchedFoldersPath());
+        }
+
+        @Test
+        @DisplayName("An all-blank list falls back to the legacy dir, then default")
+        void allBlankListFallsBackToDefault() {
+            ApplicationProperties properties = newProperties();
+            properties
+                    .getSystem()
+                    .getCustomPaths()
+                    .getPipeline()
+                    .setWatchedFoldersDirs(new ArrayList<>(Arrays.asList("", "   ")));
+
+            RuntimePathConfig config = build(properties);
+
+            // sanitizePathList strips everything -> empty -> falls through to default watched
+            // folder.
+            // The default is also resolved to an absolute, normalized path by the production code.
+            String expectedDefault =
+                    Path.of(Path.of(BASE_PATH, "pipeline").toString(), "watchedFolders")
+                            .toAbsolutePath()
+                            .normalize()
+                            .toString();
+            assertEquals(1, config.getPipelineWatchedFoldersPaths().size());
+            assertEquals(expectedDefault, config.getPipelineWatchedFoldersPath());
+        }
+
+        @Test
+        @DisplayName("First watched folder path is always exposed via the singular getter")
+        void singularGetterReturnsFirstEntry() {
+            ApplicationProperties properties = newProperties();
+            properties
+                    .getSystem()
+                    .getCustomPaths()
+                    .getPipeline()
+                    .setWatchedFoldersDirs(new ArrayList<>(Arrays.asList("firstDir", "secondDir")));
+
+            RuntimePathConfig config = build(properties);
+
+            assertEquals(
+                    config.getPipelineWatchedFoldersPaths().get(0),
+                    config.getPipelineWatchedFoldersPath());
+            assertEquals(
+                    Path.of("firstDir").toAbsolutePath().normalize().toString(),
+                    config.getPipelineWatchedFoldersPath());
+        }
+    }
+
+    @Nested
+    @DisplayName("Operation tool path resolution")
+    class OperationPaths {
+
+        @Test
+        @DisplayName("Defaults to bare command names when not running in Docker")
+        void defaultOperationPaths() {
+            // The test host has no /.dockerenv, so the non-docker defaults apply.
+            RuntimePathConfig config = build(newProperties());
+
+            assertEquals("weasyprint", config.getWeasyPrintPath());
+            assertEquals("unoconvert", config.getUnoConvertPath());
+            assertEquals("ebook-convert", config.getCalibrePath());
+            assertEquals("ocrmypdf", config.getOcrMyPdfPath());
+            assertEquals("soffice", config.getSOfficePath());
+        }
+
+        @Test
+        @DisplayName("Custom operation paths override the defaults")
+        void customOperationPaths() {
+            ApplicationProperties properties = newProperties();
+            Operations operations = properties.getSystem().getCustomPaths().getOperations();
+            operations.setWeasyprint("/opt/custom/weasyprint");
+            operations.setUnoconvert("/opt/custom/unoconvert");
+            operations.setCalibre("/opt/custom/ebook-convert");
+            operations.setOcrmypdf("/opt/custom/ocrmypdf");
+            operations.setSoffice("/opt/custom/soffice");
+
+            RuntimePathConfig config = build(properties);
+
+            assertEquals("/opt/custom/weasyprint", config.getWeasyPrintPath());
+            assertEquals("/opt/custom/unoconvert", config.getUnoConvertPath());
+            assertEquals("/opt/custom/ebook-convert", config.getCalibrePath());
+            assertEquals("/opt/custom/ocrmypdf", config.getOcrMyPdfPath());
+            assertEquals("/opt/custom/soffice", config.getSOfficePath());
+        }
+
+        @Test
+        @DisplayName("Blank custom operation path falls back to the default")
+        void blankOperationPathFallsBack() {
+            ApplicationProperties properties = newProperties();
+            properties.getSystem().getCustomPaths().getOperations().setWeasyprint("   ");
+
+            RuntimePathConfig config = build(properties);
+
+            assertEquals("weasyprint", config.getWeasyPrintPath());
+        }
+
+        @Test
+        @DisplayName("A single custom path leaves the other operation paths at defaults")
+        void partialOperationOverride() {
+            ApplicationProperties properties = newProperties();
+            properties
+                    .getSystem()
+                    .getCustomPaths()
+                    .getOperations()
+                    .setSoffice("/usr/local/soffice");
+
+            RuntimePathConfig config = build(properties);
+
+            assertEquals("/usr/local/soffice", config.getSOfficePath());
+            assertEquals("weasyprint", config.getWeasyPrintPath());
+            assertEquals("unoconvert", config.getUnoConvertPath());
+        }
+    }
+
+    @Nested
+    @DisplayName("Tesseract data path resolution")
+    class TessdataPath {
+
+        @Test
+        @DisplayName("Explicit tessdataDir config wins over env var and default")
+        void configuredTessdataDirWins() {
+            ApplicationProperties properties = newProperties();
+            properties.getSystem().setTessdataDir("/my/tessdata");
+
+            RuntimePathConfig config = build(properties);
+
+            // Config setting has the highest priority regardless of TESSDATA_PREFIX env state.
+            assertEquals("/my/tessdata", config.getTessDataPath());
+        }
+
+        @Test
+        @DisplayName("tessDataPath is never null even with no config")
+        void tessDataPathNeverNull() {
+            RuntimePathConfig config = build(newProperties());
+
+            // With no config setting, the value comes from TESSDATA_PREFIX or the hard default,
+            // either of which is non-null.
+            assertNotNull(config.getTessDataPath());
+            assertFalse(config.getTessDataPath().isEmpty());
+        }
+    }
+
+    @Nested
+    @DisplayName("UNO server endpoint resolution")
+    class UnoServerEndpoints {
+
+        @Test
+        @DisplayName("Auto mode builds one endpoint when session limit is unset (defaults to 1)")
+        void autoSingleEndpointByDefault() {
+            // Default ApplicationProperties: autoUnoServer = true, libreOfficeSessionLimit = 0 ->
+            // 1.
+            RuntimePathConfig config = build(newProperties());
+
+            List<UnoServerEndpoint> endpoints = config.getUnoServerEndpoints();
+            assertEquals(1, endpoints.size());
+            assertEquals("127.0.0.1", endpoints.get(0).getHost());
+            assertEquals(2003, endpoints.get(0).getPort());
+        }
+
+        @Test
+        @DisplayName("Auto mode builds N endpoints on consecutive even ports")
+        void autoMultipleEndpoints() {
+            ApplicationProperties properties = newProperties();
+            properties.getProcessExecutor().getSessionLimit().setLibreOfficeSessionLimit(3);
+
+            RuntimePathConfig config = build(properties);
+
+            List<UnoServerEndpoint> endpoints = config.getUnoServerEndpoints();
+            assertEquals(3, endpoints.size());
+            assertEquals(2003, endpoints.get(0).getPort());
+            assertEquals(2005, endpoints.get(1).getPort());
+            assertEquals(2007, endpoints.get(2).getPort());
+            for (UnoServerEndpoint endpoint : endpoints) {
+                assertEquals("127.0.0.1", endpoint.getHost());
+            }
+        }
+
+        @Test
+        @DisplayName("Manual mode returns the configured (valid) endpoints")
+        void manualEndpointsAreUsed() {
+            ApplicationProperties properties = newProperties();
+            ApplicationProperties.ProcessExecutor processExecutor = properties.getProcessExecutor();
+            processExecutor.setAutoUnoServer(false);
+
+            UnoServerEndpoint endpoint = new UnoServerEndpoint();
+            endpoint.setHost("10.0.0.5");
+            endpoint.setPort(4000);
+            processExecutor.setUnoServerEndpoints(new ArrayList<>(Arrays.asList(endpoint)));
+
+            RuntimePathConfig config = build(properties);
+
+            List<UnoServerEndpoint> endpoints = config.getUnoServerEndpoints();
+            assertEquals(1, endpoints.size());
+            assertEquals("10.0.0.5", endpoints.get(0).getHost());
+            assertEquals(4000, endpoints.get(0).getPort());
+        }
+
+        @Test
+        @DisplayName("Manual mode filters out endpoints with blank host or non-positive port")
+        void manualEndpointsAreSanitized() {
+            ApplicationProperties properties = newProperties();
+            ApplicationProperties.ProcessExecutor processExecutor = properties.getProcessExecutor();
+            processExecutor.setAutoUnoServer(false);
+
+            UnoServerEndpoint valid = new UnoServerEndpoint();
+            valid.setHost("192.168.1.10");
+            valid.setPort(5000);
+
+            UnoServerEndpoint blankHost = new UnoServerEndpoint();
+            blankHost.setHost("   ");
+            blankHost.setPort(5001);
+
+            UnoServerEndpoint badPort = new UnoServerEndpoint();
+            badPort.setHost("192.168.1.11");
+            badPort.setPort(0);
+
+            processExecutor.setUnoServerEndpoints(
+                    new ArrayList<>(Arrays.asList(valid, blankHost, badPort)));
+
+            RuntimePathConfig config = build(properties);
+
+            List<UnoServerEndpoint> endpoints = config.getUnoServerEndpoints();
+            assertEquals(1, endpoints.size());
+            assertEquals("192.168.1.10", endpoints.get(0).getHost());
+            assertEquals(5000, endpoints.get(0).getPort());
+        }
+
+        @Test
+        @DisplayName("Manual mode with no usable endpoints falls back to a single default endpoint")
+        void manualModeNoEndpointsFallsBackToDefault() {
+            ApplicationProperties properties = newProperties();
+            ApplicationProperties.ProcessExecutor processExecutor = properties.getProcessExecutor();
+            processExecutor.setAutoUnoServer(false);
+            processExecutor.setUnoServerEndpoints(new ArrayList<>());
+
+            RuntimePathConfig config = build(properties);
+
+            List<UnoServerEndpoint> endpoints = config.getUnoServerEndpoints();
+            assertEquals(1, endpoints.size());
+            assertEquals("127.0.0.1", endpoints.get(0).getHost());
+            assertEquals(2003, endpoints.get(0).getPort());
+        }
+
+        @Test
+        @DisplayName("Null processExecutor defaults to a single UNO endpoint")
+        void nullProcessExecutorDefaultsToSingleEndpoint() {
+            ApplicationProperties properties = newProperties();
+            properties.setProcessExecutor(null);
+
+            RuntimePathConfig config = build(properties);
+
+            List<UnoServerEndpoint> endpoints = config.getUnoServerEndpoints();
+            assertEquals(1, endpoints.size());
+            assertEquals("127.0.0.1", endpoints.get(0).getHost());
+            assertEquals(2003, endpoints.get(0).getPort());
+        }
+    }
+
+    @Nested
+    @DisplayName("General contract")
+    class GeneralContract {
+
+        @Test
+        @DisplayName("getProperties returns the same instance passed to the constructor")
+        void propertiesAccessorReturnsSameInstance() {
+            ApplicationProperties properties = newProperties();
+
+            RuntimePathConfig config = build(properties);
+
+            assertSame(properties, config.getProperties());
+        }
+
+        @Test
+        @DisplayName("basePath matches InstallationPathConfig.getPath()")
+        void basePathMatchesInstallationPath() {
+            RuntimePathConfig config = build(newProperties());
+
+            assertEquals(BASE_PATH, config.getBasePath());
+        }
+
+        @Test
+        @DisplayName("All resolved path getters are non-null")
+        void allPathsNonNull() {
+            RuntimePathConfig config = build(newProperties());
+
+            assertNotNull(config.getPipelinePath());
+            assertNotNull(config.getPipelineWatchedFoldersPath());
+            assertNotNull(config.getPipelineWatchedFoldersPaths());
+            assertNotNull(config.getPipelineFinishedFoldersPath());
+            assertNotNull(config.getPipelineDefaultWebUiConfigs());
+            assertNotNull(config.getWeasyPrintPath());
+            assertNotNull(config.getUnoConvertPath());
+            assertNotNull(config.getCalibrePath());
+            assertNotNull(config.getOcrMyPdfPath());
+            assertNotNull(config.getSOfficePath());
+            assertNotNull(config.getTessDataPath());
+            assertNotNull(config.getUnoServerEndpoints());
+            assertTrue(config.getUnoServerEndpoints().size() >= 1);
+        }
+    }
+}

app/common/src/test/java/stirling/software/common/model/ApplicationPropertiesLogicTest.java

@@ -2,7 +2,7 @@ package stirling.software.common.model;
 
 import static org.junit.jupiter.api.Assertions.*;
 
-import java.nio.file.Paths;
+import java.nio.file.Path;
 import java.util.ArrayList;
 import java.util.Collection;
 import java.util.List;
@@ -31,18 +31,33 @@ class ApplicationPropertiesLogicTest {
         assertTrue(sys.isAnalyticsEnabled());
     }
 
+    @Test
+    void storageSigning_userListScope_defaultsToOrg_andIsSettable() {
+        // Self-host backward-compat: scope must default to "org" (saas profile pins "team").
+        ApplicationProperties.Storage.Signing signing = new ApplicationProperties.Storage.Signing();
+
+        assertFalse(signing.isEnabled());
+        assertEquals("org", signing.getUserListScope());
+
+        signing.setUserListScope("team");
+        assertEquals("team", signing.getUserListScope());
+
+        // Reachable from the full tree as storage.signing.userListScope.
+        assertEquals(
+                "org", new ApplicationProperties().getStorage().getSigning().getUserListScope());
+    }
+
     @Test
     void tempFileManagement_defaults_and_overrides() {
-        Function<String, String> normalize = s -> Paths.get(s).normalize().toString();
+        Function<String, String> normalize = s -> Path.of(s).normalize().toString();
         ApplicationProperties.TempFileManagement tfm =
                 new ApplicationProperties.TempFileManagement();
 
         String expectedBase =
-                Paths.get(java.lang.System.getProperty("java.io.tmpdir"), "stirling-pdf")
-                        .toString();
+                Path.of(java.lang.System.getProperty("java.io.tmpdir"), "stirling-pdf").toString();
         assertEquals(expectedBase, tfm.getBaseTmpDir());
 
-        String expectedLibre = Paths.get(expectedBase, "libreoffice").toString();
+        String expectedLibre = Path.of(expectedBase, "libreoffice").toString();
         assertEquals(expectedLibre, tfm.getLibreofficeDir());
 
         tfm.setBaseTmpDir("/custom/base");

app/common/src/test/java/stirling/software/common/pdf/PdfMarkdownConverterTest.java

@@ -0,0 +1,269 @@
+package stirling.software.common.pdf;
+
+import static org.junit.jupiter.api.Assertions.assertDoesNotThrow;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+import static org.junit.jupiter.api.Assertions.fail;
+
+import java.io.IOException;
+import java.io.InputStream;
+import java.nio.charset.StandardCharsets;
+import java.nio.file.Files;
+import java.nio.file.Path;
+import java.util.ArrayList;
+import java.util.List;
+import java.util.stream.Stream;
+
+import org.junit.jupiter.api.Disabled;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+import org.junit.jupiter.params.ParameterizedTest;
+import org.junit.jupiter.params.provider.Arguments;
+import org.junit.jupiter.params.provider.MethodSource;
+
+import stirling.software.jpdfium.PdfDocument;
+import stirling.software.jpdfium.text.TextLine;
+import stirling.software.jpdfium.text.TextWord;
+
+/**
+ * Accuracy and robustness tests for {@link PdfMarkdownConverter}, comparing conversion output
+ * against hand-authored golden Markdown for a set of owned/synthetic fixtures.
+ *
+ * <p>The {@link #gatedFixtures()} set is enforced in CI: those fixtures currently convert within
+ * the accuracy threshold and guard against regressions. Fixtures still being iterated on live in
+ * {@link #wipFixtures()} under a {@link Disabled} test so the goldens stay in the tree without
+ * breaking the build. Enable the WIP test locally to see per-fixture scores while working on the
+ * converter.
+ */
+class PdfMarkdownConverterTest {
+
+    /** Accuracy threshold: output must share at least this fraction of content with the golden. */
+    private static final double THRESHOLD = 0.95;
+
+    @TempDir Path tmp;
+
+    /** Fixtures that meet the accuracy threshold today and therefore gate CI. */
+    static Stream<Arguments> gatedFixtures() {
+        return Stream.of(
+                Arguments.of("multi-column-test_lorem.pdf", "multi-column-test_lorem.md"),
+                Arguments.of("bordered-table-test_widget.pdf", "bordered-table-test_widget.md"),
+                Arguments.of("many-tables-test_stress.pdf", "many-tables-test_stress.md"));
+    }
+
+    /** Fixtures still below the threshold; tracked here, enable locally to iterate. */
+    static Stream<Arguments> wipFixtures() {
+        return Stream.of(
+                Arguments.of(
+                        "wrapped-cell-test_expense-report.pdf",
+                        "wrapped-cell-test_expense-report.md"));
+    }
+
+    @ParameterizedTest(name = "{0}")
+    @MethodSource("gatedFixtures")
+    void convertMatchesGoldenMarkdown(String pdfName, String mdName) throws IOException {
+        assertConversionMatchesGolden(pdfName, mdName);
+    }
+
+    @Disabled("WIP fixtures below the accuracy threshold; enable locally to iterate")
+    @ParameterizedTest(name = "{0}")
+    @MethodSource("wipFixtures")
+    void convertMatchesGoldenMarkdownWip(String pdfName, String mdName) throws IOException {
+        assertConversionMatchesGolden(pdfName, mdName);
+    }
+
+    /**
+     * Degenerate/extreme geometry must not crash the converter. A crafted or malformed PDF can
+     * position text anywhere via a text matrix, so a row's words can span from near the origin to a
+     * coordinate beyond {@link Integer#MAX_VALUE}. The old column-detection code sized an {@code
+     * int[]} straight from {@code (int) Math.ceil(maxX) - lo}, which either allocated a multi-GB
+     * array (OutOfMemoryError) or overflowed to a negative length (NegativeArraySizeException) —
+     * taking down the request thread. Detection must instead bail out and return no columns.
+     */
+    @Test
+    void columnDetectionSurvivesDegenerateGeometry() {
+        // x ≈ 2.5e9 is past Integer.MAX_VALUE; combined with a near-origin word it yields an
+        // implausible span that the pre-fix code turned into a fatal array allocation.
+        List<TextLine> rows = new ArrayList<>();
+        for (int r = 0; r < 4; r++) {
+            float y = 400f - r * 12f;
+            TextWord near = new TextWord(List.of(), 50f, y, 30f, 10f);
+            TextWord far = new TextWord(List.of(), 2_500_000_000f, y, 30f, 10f);
+            rows.add(new TextLine(List.of(near, far), 50f, y, 2_499_999_980f, 10f));
+        }
+
+        List<float[]> columns =
+                assertDoesNotThrow(() -> PdfMarkdownConverter.findColumnRangesFromLines(rows));
+        assertTrue(
+                columns.isEmpty(),
+                "implausible page span should disable column detection, not allocate from it");
+    }
+
+    private void assertConversionMatchesGolden(String pdfName, String mdName) throws IOException {
+        Path pdfPath = tmp.resolve(pdfName);
+        try (InputStream in =
+                getClass().getResourceAsStream("/pdf-ingestion-fixtures/" + pdfName)) {
+            if (in == null) {
+                fail("Fixture not found on classpath: /pdf-ingestion-fixtures/" + pdfName);
+            }
+            Files.copy(in, pdfPath);
+        }
+
+        String actual;
+        try (PdfDocument doc = PdfDocument.open(pdfPath)) {
+            actual = new PdfMarkdownConverter().convert(doc);
+        }
+
+        String expected;
+        try (InputStream in = getClass().getResourceAsStream("/pdf-ingestion-fixtures/" + mdName)) {
+            if (in == null) {
+                fail("Golden file not found on classpath: /pdf-ingestion-fixtures/" + mdName);
+            }
+            expected = new String(in.readAllBytes(), StandardCharsets.UTF_8);
+        }
+
+        // Image placeholders are not scored: their body text is a TODO ("ideally, add the info
+        // available about the image...") rather than real content, so comparing it would penalise
+        // output for matching a placeholder we intend to replace. Drop those lines from both sides.
+        expected = stripImagePlaceholders(expected);
+        actual = stripImagePlaceholders(actual);
+
+        double similarity = similarity(expected, actual);
+        if (similarity < THRESHOLD) {
+            fail(
+                    String.format(
+                            "Markdown output differs from golden file '%s' by %.1f%% (threshold %.0f%%):%n%s",
+                            mdName,
+                            (1.0 - similarity) * 100,
+                            (1.0 - THRESHOLD) * 100,
+                            unifiedDiff(expected, actual)));
+        }
+    }
+
+    /** Substring identifying an image-placeholder line, which is excluded from scoring. */
+    private static final String IMAGE_PLACEHOLDER_MARKER = "Image intentionally redacted";
+
+    /**
+     * Removes non-content lines from the comparison: image placeholders (TODO text we intend to
+     * replace) and GFM table separator rows (the {@code |---|---|} divider, whose exact dash count
+     * is cosmetic — any run of three or more dashes is valid Markdown).
+     */
+    private static String stripImagePlaceholders(String md) {
+        StringBuilder sb = new StringBuilder();
+        for (String line : md.split("\n", -1)) {
+            if (line.contains(IMAGE_PLACEHOLDER_MARKER)
+                    || line.strip().startsWith("<image redacted")
+                    || isTableSeparatorRow(line)) {
+                continue;
+            }
+            if (sb.length() > 0) {
+                sb.append('\n');
+            }
+            sb.append(line);
+        }
+        return sb.toString();
+    }
+
+    /** True for a GFM table separator row, e.g. {@code |---|:--:|---|} (only |, -, :, space). */
+    private static boolean isTableSeparatorRow(String line) {
+        String t = line.strip();
+        if (!t.contains("-")) {
+            return false;
+        }
+        return t.chars().allMatch(c -> c == '|' || c == '-' || c == ':' || c == ' ');
+    }
+
+    /**
+     * Character-level similarity: proportion of expected characters that appear in the LCS. O(n*m)
+     * but golden files are small enough that this is fine.
+     */
+    private static double similarity(String expected, String actual) {
+        if (expected.isEmpty() && actual.isEmpty()) return 1.0;
+        if (expected.isEmpty() || actual.isEmpty()) return 0.0;
+        // Strip all whitespace for a content-focused comparison
+        String e = expected.replaceAll("\\s+", " ").strip();
+        String a = actual.replaceAll("\\s+", " ").strip();
+        int lcs = lcsLength(e, a);
+        return (double) lcs / Math.max(e.length(), a.length());
+    }
+
+    private static int lcsLength(String a, String b) {
+        // Use two-row DP to keep memory reasonable
+        int m = a.length(), n = b.length();
+        int[] prev = new int[n + 1];
+        int[] curr = new int[n + 1];
+        for (int i = 1; i <= m; i++) {
+            for (int j = 1; j <= n; j++) {
+                if (a.charAt(i - 1) == b.charAt(j - 1)) {
+                    curr[j] = prev[j - 1] + 1;
+                } else {
+                    curr[j] = Math.max(curr[j - 1], prev[j]);
+                }
+            }
+            int[] tmp = prev;
+            prev = curr;
+            curr = tmp;
+            java.util.Arrays.fill(curr, 0);
+        }
+        return prev[n];
+    }
+
+    private static String unifiedDiff(String expected, String actual) {
+        String[] expectedLines = expected.split("\n", -1);
+        String[] actualLines = actual.split("\n", -1);
+
+        List<String> diff = new ArrayList<>();
+        diff.add("--- expected");
+        diff.add("+++ actual");
+
+        int maxLines = Math.max(expectedLines.length, actualLines.length);
+        int context = 3;
+        boolean inHunk = false;
+        int hunkStart = -1;
+        List<String> hunkLines = new ArrayList<>();
+
+        for (int i = 0; i < maxLines; i++) {
+            String exp = i < expectedLines.length ? expectedLines[i] : null;
+            String act = i < actualLines.length ? actualLines[i] : null;
+
+            boolean changed = exp == null || act == null || !exp.equals(act);
+            if (changed) {
+                if (!inHunk) {
+                    inHunk = true;
+                    hunkStart = Math.max(0, i - context);
+                    // add context lines before change
+                    for (int c = hunkStart; c < i; c++) {
+                        hunkLines.add(" " + (c < expectedLines.length ? expectedLines[c] : ""));
+                    }
+                }
+                if (exp != null) hunkLines.add("-" + exp);
+                if (act != null) hunkLines.add("+" + act);
+            } else {
+                if (inHunk) {
+                    hunkLines.add(" " + exp);
+                    // check if we're far enough past the last change to close the hunk
+                    boolean moreChanges = false;
+                    for (int j = i + 1; j < Math.min(i + context, maxLines); j++) {
+                        String e2 = j < expectedLines.length ? expectedLines[j] : null;
+                        String a2 = j < actualLines.length ? actualLines[j] : null;
+                        if (e2 == null || a2 == null || !e2.equals(a2)) {
+                            moreChanges = true;
+                            break;
+                        }
+                    }
+                    if (!moreChanges && (i - hunkStart) >= context) {
+                        diff.add("@@ -" + (hunkStart + 1) + " @@");
+                        diff.addAll(hunkLines);
+                        hunkLines.clear();
+                        inHunk = false;
+                    }
+                }
+            }
+        }
+
+        if (inHunk && !hunkLines.isEmpty()) {
+            diff.add("@@ -" + (hunkStart + 1) + " @@");
+            diff.addAll(hunkLines);
+        }
+
+        return String.join("\n", diff);
+    }
+}

app/common/src/test/java/stirling/software/common/service/FileStorageDelegationTest.java

@@ -5,6 +5,7 @@ import static org.mockito.Mockito.mock;
 
 import java.io.IOException;
 import java.nio.file.Path;
+import java.util.Optional;
 
 import org.junit.jupiter.api.Test;
 import org.junit.jupiter.api.io.TempDir;
@@ -19,7 +20,8 @@ class FileStorageDelegationTest {
         FileStorage fs =
                 new FileStorage(
                         mock(FileOrUploadService.class),
-                        new LocalDiskFileStore(tempDir.toString()));
+                        new LocalDiskFileStore(tempDir.toString()),
+                        Optional.empty());
         byte[] payload = "round-trip".getBytes();
         String id = fs.storeBytes(payload, "x.bin");
         assertArrayEquals(payload, fs.retrieveBytes(id));

app/common/src/test/java/stirling/software/common/service/FileStorageOwnershipTest.java

@@ -0,0 +1,107 @@
+package stirling.software.common.service;
+
+import static org.junit.jupiter.api.Assertions.assertArrayEquals;
+import static org.junit.jupiter.api.Assertions.assertThrows;
+import static org.mockito.Mockito.mock;
+import static org.mockito.Mockito.when;
+
+import java.io.IOException;
+import java.nio.file.Path;
+import java.util.Optional;
+import java.util.concurrent.atomic.AtomicReference;
+
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+
+import stirling.software.common.cluster.inprocess.LocalDiskFileStore;
+import stirling.software.common.util.JobContext;
+
+class FileStorageOwnershipTest {
+
+    private FileStorage newStorageWithoutSecurity(Path tempDir) {
+        return new FileStorage(
+                mock(FileOrUploadService.class),
+                new LocalDiskFileStore(tempDir.toString()),
+                Optional.empty());
+    }
+
+    private FileStorage newStorageWithCurrentUser(Path tempDir, AtomicReference<String> userRef) {
+        JobOwnershipService svc = mock(JobOwnershipService.class);
+        when(svc.getCurrentUserId()).thenAnswer(invocation -> Optional.ofNullable(userRef.get()));
+        return new FileStorage(
+                mock(FileOrUploadService.class),
+                new LocalDiskFileStore(tempDir.toString()),
+                Optional.of(svc));
+    }
+
+    @Test
+    void desktopMode_noOwnershipService_storesAndRetrievesWithoutChecks(@TempDir Path tempDir)
+            throws IOException {
+        FileStorage fs = newStorageWithoutSecurity(tempDir);
+        byte[] payload = "desktop".getBytes();
+        String id = fs.storeBytes(payload, "x.bin");
+        assertArrayEquals(payload, fs.retrieveBytes(id));
+    }
+
+    @Test
+    void sameUserStoresAndRetrieves_allowed(@TempDir Path tempDir) throws IOException {
+        AtomicReference<String> user = new AtomicReference<>("alice");
+        FileStorage fs = newStorageWithCurrentUser(tempDir, user);
+        byte[] payload = "alice's file".getBytes();
+        String id = fs.storeBytes(payload, "x.bin");
+        assertArrayEquals(payload, fs.retrieveBytes(id));
+    }
+
+    @Test
+    void differentUserRetrieves_throwsSecurityException(@TempDir Path tempDir) throws IOException {
+        AtomicReference<String> user = new AtomicReference<>("alice");
+        FileStorage fs = newStorageWithCurrentUser(tempDir, user);
+        String id = fs.storeBytes("alice's file".getBytes(), "x.bin");
+        user.set("bob");
+        assertThrows(SecurityException.class, () -> fs.retrieveBytes(id));
+        assertThrows(SecurityException.class, () -> fs.retrieveInputStream(id));
+        assertThrows(SecurityException.class, () -> fs.getFileSize(id));
+        assertThrows(SecurityException.class, () -> fs.fileExists(id));
+        assertThrows(SecurityException.class, () -> fs.deleteFile(id));
+    }
+
+    @Test
+    void anonymousRetrieveOfOwnedFile_allowed_noCurrentUserMeansNoCompare(@TempDir Path tempDir)
+            throws IOException {
+        AtomicReference<String> user = new AtomicReference<>("alice");
+        FileStorage fs = newStorageWithCurrentUser(tempDir, user);
+        byte[] payload = "alice's file".getBytes();
+        String id = fs.storeBytes(payload, "x.bin");
+        user.set(null);
+        assertArrayEquals(payload, fs.retrieveBytes(id));
+    }
+
+    @Test
+    void authedRetrieveOfAnonymousFile_allowed_noOwnerOnFile(@TempDir Path tempDir)
+            throws IOException {
+        AtomicReference<String> user = new AtomicReference<>(null);
+        FileStorage fs = newStorageWithCurrentUser(tempDir, user);
+        byte[] payload = "no-owner".getBytes();
+        String id = fs.storeBytes(payload, "x.bin");
+        user.set("alice");
+        assertArrayEquals(payload, fs.retrieveBytes(id));
+    }
+
+    @Test
+    void propagatedOwner_scopesAsyncWriteWithNoLiveUser(@TempDir Path tempDir) throws IOException {
+        AtomicReference<String> user = new AtomicReference<>(null);
+        FileStorage fs = newStorageWithCurrentUser(tempDir, user);
+        byte[] payload = "alice's async result".getBytes();
+        String id;
+        try {
+            JobContext.setOwner("alice");
+            id = fs.storeBytes(payload, "x.bin");
+        } finally {
+            JobContext.clear();
+        }
+        user.set("alice");
+        assertArrayEquals(payload, fs.retrieveBytes(id));
+        user.set("bob");
+        assertThrows(SecurityException.class, () -> fs.retrieveBytes(id));
+    }
+}

app/common/src/test/java/stirling/software/common/service/FileStorageTest.java

@@ -9,6 +9,8 @@ import java.io.InputStream;
 import java.nio.charset.StandardCharsets;
 import java.nio.file.Files;
 import java.nio.file.Path;
+import java.util.Optional;
+import java.util.UUID;
 import java.util.stream.Stream;
 
 import org.junit.jupiter.api.BeforeEach;
@@ -37,7 +39,10 @@ class FileStorageTest {
     void setUp() throws IOException {
         MockitoAnnotations.openMocks(this);
         fileStorage =
-                new FileStorage(fileOrUploadService, new LocalDiskFileStore(tempDir.toString()));
+                new FileStorage(
+                        fileOrUploadService,
+                        new LocalDiskFileStore(tempDir.toString()),
+                        Optional.empty());
 
         // Create a mock MultipartFile
         mockFile = mock(MultipartFile.class);
@@ -79,7 +84,7 @@ class FileStorageTest {
     void testRetrieveFile() throws IOException {
         // Arrange
         byte[] fileContent = "Test PDF content".getBytes();
-        String fileId = "test-file-1";
+        String fileId = UUID.randomUUID().toString();
         Path filePath = tempDir.resolve(fileId);
         Files.write(filePath, fileContent);
 
@@ -99,7 +104,7 @@ class FileStorageTest {
     void testRetrieveBytes() throws IOException {
         // Arrange
         byte[] fileContent = "Test PDF content".getBytes();
-        String fileId = "test-file-2";
+        String fileId = UUID.randomUUID().toString();
         Path filePath = tempDir.resolve(fileId);
         Files.write(filePath, fileContent);
 
@@ -113,7 +118,7 @@ class FileStorageTest {
     @Test
     void testRetrieveFile_FileNotFound() {
         // Arrange
-        String nonExistentFileId = "non-existent-file";
+        String nonExistentFileId = UUID.randomUUID().toString();
 
         // Act & Assert
         assertThrows(IOException.class, () -> fileStorage.retrieveFile(nonExistentFileId));
@@ -122,7 +127,7 @@ class FileStorageTest {
     @Test
     void testRetrieveBytes_FileNotFound() {
         // Arrange
-        String nonExistentFileId = "non-existent-file";
+        String nonExistentFileId = UUID.randomUUID().toString();
 
         // Act & Assert
         assertThrows(IOException.class, () -> fileStorage.retrieveBytes(nonExistentFileId));
@@ -132,7 +137,7 @@ class FileStorageTest {
     void testDeleteFile() throws IOException {
         // Arrange
         byte[] fileContent = "Test PDF content".getBytes();
-        String fileId = "test-file-3";
+        String fileId = UUID.randomUUID().toString();
         Path filePath = tempDir.resolve(fileId);
         Files.write(filePath, fileContent);
 
@@ -147,7 +152,7 @@ class FileStorageTest {
     @Test
     void testDeleteFile_FileNotFound() {
         // Arrange
-        String nonExistentFileId = "non-existent-file";
+        String nonExistentFileId = UUID.randomUUID().toString();
 
         // Act
         boolean result = fileStorage.deleteFile(nonExistentFileId);
@@ -160,7 +165,7 @@ class FileStorageTest {
     void testFileExists() throws IOException {
         // Arrange
         byte[] fileContent = "Test PDF content".getBytes();
-        String fileId = "test-file-4";
+        String fileId = UUID.randomUUID().toString();
         Path filePath = tempDir.resolve(fileId);
         Files.write(filePath, fileContent);
 
@@ -174,7 +179,7 @@ class FileStorageTest {
     @Test
     void testFileExists_FileNotFound() {
         // Arrange
-        String nonExistentFileId = "non-existent-file";
+        String nonExistentFileId = UUID.randomUUID().toString();
 
         // Act
         boolean result = fileStorage.fileExists(nonExistentFileId);

app/common/src/test/java/stirling/software/common/service/InternalApiClientTest.java

@@ -59,6 +59,53 @@ class InternalApiClientTest {
                 servletContext, userService, tempFileManager, environment, applicationProperties);
     }
 
+    @Test
+    void postTagsRequestAsAutomation() throws Exception {
+        // Every InternalApiClient.post() caller is a parent automation flow dispatching a child
+        // tool (pipeline executor, AI workflow, policy runner). Tagging the sub-step here means
+        // the saas PaygChargeInterceptor classifies it as BillingCategory.AUTOMATION regardless of
+        // the dispatched controller's @RequiresFeature — so an AI-OCR step inside a policy run
+        // bills as AUTOMATION, not AI. The header value is the literal string "true" because the
+        // interceptor compares case-insensitively-trimmed against that token.
+        MultiValueMap<String, Object> body = new LinkedMultiValueMap<>();
+        body.add("fileInput", namedResource("input.pdf", "data"));
+
+        Path tempPath = Files.createTempFile("internal-api-automation-test", ".tmp");
+        TempFile tempFile = mock(TempFile.class);
+        when(tempFile.getPath()).thenReturn(tempPath);
+        when(tempFile.getFile()).thenReturn(tempPath.toFile());
+        when(tempFileManager.createManagedTempFile("internal-api")).thenReturn(tempFile);
+
+        HttpHeaders[] captured = {null};
+
+        try (var ignored =
+                mockConstruction(
+                        RestTemplate.class,
+                        (rt, ctx) -> {
+                            when(rt.httpEntityCallback(any(), eq(Resource.class)))
+                                    .thenAnswer(
+                                            inv -> {
+                                                HttpEntity<?> entity = inv.getArgument(0);
+                                                captured[0] = entity.getHeaders();
+                                                return (RequestCallback) req -> {};
+                                            });
+                            when(rt.execute(anyString(), eq(HttpMethod.POST), any(), any()))
+                                    .thenAnswer(inv -> fakeOkResponse(inv.getArgument(3)));
+                        })) {
+
+            InternalApiClient mockedClient = newClient();
+            mockedClient.post("/api/v1/general/merge-pdfs", body);
+
+            assertNotNull(captured[0]);
+            assertEquals(
+                    "true",
+                    captured[0].getFirst(InternalApiClient.AUTOMATION_HEADER),
+                    "Sub-step dispatch must carry the automation marker header");
+        } finally {
+            Files.deleteIfExists(tempPath);
+        }
+    }
+
     @Test
     void postDoesNotForceContentType() throws Exception {
         MultiValueMap<String, Object> body = new LinkedMultiValueMap<>();

app/common/src/test/java/stirling/software/common/service/MobileScannerServiceTest.java

@@ -0,0 +1,471 @@
+package stirling.software.common.service;
+
+import static org.junit.jupiter.api.Assertions.*;
+
+import java.io.IOException;
+import java.nio.charset.StandardCharsets;
+import java.nio.file.Files;
+import java.nio.file.Path;
+import java.util.List;
+
+import org.junit.jupiter.api.BeforeEach;
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Nested;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.io.TempDir;
+import org.springframework.mock.web.MockMultipartFile;
+import org.springframework.test.util.ReflectionTestUtils;
+import org.springframework.web.multipart.MultipartFile;
+
+import stirling.software.common.service.MobileScannerService.FileMetadata;
+import stirling.software.common.service.MobileScannerService.SessionInfo;
+
+/**
+ * Unit tests for {@link MobileScannerService}. The service stores uploaded files in a temp
+ * directory. To keep tests isolated and deterministic, the {@code tempDirectory} field is
+ * redirected to a JUnit {@link TempDir} via reflection after construction.
+ */
+class MobileScannerServiceTest {
+
+    @TempDir Path tempDir;
+
+    private MobileScannerService service;
+
+    @BeforeEach
+    void setUp() throws IOException {
+        service = new MobileScannerService();
+        // Redirect the service's temp directory to the isolated test temp dir.
+        ReflectionTestUtils.setField(service, "tempDirectory", tempDir);
+    }
+
+    private MultipartFile file(String name, String content) {
+        return new MockMultipartFile(
+                "file", name, "text/plain", content.getBytes(StandardCharsets.UTF_8));
+    }
+
+    private MultipartFile emptyFile(String name) {
+        return new MockMultipartFile("file", name, "text/plain", new byte[0]);
+    }
+
+    @Nested
+    @DisplayName("createSession")
+    class CreateSession {
+
+        @Test
+        @DisplayName("creates a session and returns coherent SessionInfo")
+        void createsSession() {
+            SessionInfo info = service.createSession("abc-123");
+
+            assertNotNull(info);
+            assertEquals("abc-123", info.getSessionId());
+            assertTrue(info.getCreatedAt() > 0);
+            assertEquals(10 * 60 * 1000L, info.getTimeoutMs());
+            assertEquals(info.getCreatedAt() + info.getTimeoutMs(), info.getExpiresAt());
+        }
+
+        @Test
+        @DisplayName("session is retrievable via validateSession after creation")
+        void createdSessionIsValid() {
+            service.createSession("sess1");
+            assertNotNull(service.validateSession("sess1"));
+        }
+
+        @Test
+        @DisplayName("rejects null session ID")
+        void rejectsNull() {
+            assertThrows(IllegalArgumentException.class, () -> service.createSession(null));
+        }
+
+        @Test
+        @DisplayName("rejects blank session ID")
+        void rejectsBlank() {
+            assertThrows(IllegalArgumentException.class, () -> service.createSession("   "));
+        }
+
+        @Test
+        @DisplayName("rejects session ID with invalid characters")
+        void rejectsInvalidChars() {
+            assertThrows(IllegalArgumentException.class, () -> service.createSession("bad/id"));
+            assertThrows(IllegalArgumentException.class, () -> service.createSession("bad id"));
+            assertThrows(IllegalArgumentException.class, () -> service.createSession("bad_id"));
+        }
+
+        @Test
+        @DisplayName("accepts alphanumeric and hyphen session IDs")
+        void acceptsValidChars() {
+            assertNotNull(service.createSession("ABC-def-123"));
+        }
+    }
+
+    @Nested
+    @DisplayName("validateSession")
+    class ValidateSession {
+
+        @Test
+        @DisplayName("returns null for unknown session")
+        void unknownReturnsNull() {
+            assertNull(service.validateSession("does-not-exist"));
+        }
+
+        @Test
+        @DisplayName("returns SessionInfo for an existing session")
+        void existingReturnsInfo() {
+            service.createSession("s1");
+            SessionInfo info = service.validateSession("s1");
+
+            assertNotNull(info);
+            assertEquals("s1", info.getSessionId());
+            assertEquals(10 * 60 * 1000L, info.getTimeoutMs());
+        }
+
+        @Test
+        @DisplayName("expires and removes a session whose last access is in the past")
+        void expiredSessionRemoved() {
+            service.createSession("expired");
+
+            // Force the underlying session's last access far into the past.
+            forceLastAccess("expired", System.currentTimeMillis() - (20 * 60 * 1000L));
+
+            assertNull(service.validateSession("expired"));
+            // After expiry the session should be gone entirely.
+            assertNull(service.validateSession("expired"));
+        }
+    }
+
+    @Nested
+    @DisplayName("uploadFiles")
+    class UploadFiles {
+
+        @Test
+        @DisplayName("stores files and records metadata")
+        void storesFiles() throws IOException {
+            service.createSession("up1");
+            service.uploadFiles("up1", List.of(file("scan.txt", "hello")));
+
+            List<FileMetadata> metas = service.getSessionFiles("up1");
+            assertEquals(1, metas.size());
+            FileMetadata meta = metas.get(0);
+            assertEquals("scan.txt", meta.getFilename());
+            assertEquals(5, meta.getSize());
+            assertEquals("text/plain", meta.getContentType());
+
+            // File physically exists on disk.
+            Path stored = tempDir.resolve("up1").resolve("scan.txt");
+            assertTrue(Files.exists(stored));
+            assertEquals("hello", Files.readString(stored));
+        }
+
+        @Test
+        @DisplayName("auto-creates a session when uploading to an unregistered session ID")
+        void autoCreatesSession() throws IOException {
+            service.uploadFiles("new-session", List.of(file("a.txt", "data")));
+
+            List<FileMetadata> metas = service.getSessionFiles("new-session");
+            assertEquals(1, metas.size());
+        }
+
+        @Test
+        @DisplayName("skips empty files")
+        void skipsEmptyFiles() throws IOException {
+            service.createSession("up2");
+            service.uploadFiles("up2", List.of(emptyFile("empty.txt"), file("real.txt", "x")));
+
+            List<FileMetadata> metas = service.getSessionFiles("up2");
+            assertEquals(1, metas.size());
+            assertEquals("real.txt", metas.get(0).getFilename());
+        }
+
+        @Test
+        @DisplayName("sanitizes dangerous filename characters")
+        void sanitizesFilename() throws IOException {
+            service.createSession("up3");
+            service.uploadFiles("up3", List.of(file("we ird@na#me.txt", "x")));
+
+            List<FileMetadata> metas = service.getSessionFiles("up3");
+            assertEquals(1, metas.size());
+            String stored = metas.get(0).getFilename();
+            // Disallowed chars replaced with underscores; allowed set is [a-zA-Z0-9._-].
+            assertTrue(stored.matches("[a-zA-Z0-9._-]+"), "unexpected filename: " + stored);
+            assertTrue(Files.exists(tempDir.resolve("up3").resolve(stored)));
+        }
+
+        @Test
+        @DisplayName("handles duplicate filenames by appending a counter")
+        void handlesDuplicateFilenames() throws IOException {
+            service.createSession("up4");
+            service.uploadFiles("up4", List.of(file("dup.txt", "one")));
+            service.uploadFiles("up4", List.of(file("dup.txt", "two")));
+
+            List<FileMetadata> metas = service.getSessionFiles("up4");
+            assertEquals(2, metas.size());
+
+            Path original = tempDir.resolve("up4").resolve("dup.txt");
+            Path renamed = tempDir.resolve("up4").resolve("dup-1.txt");
+            assertTrue(Files.exists(original));
+            assertTrue(Files.exists(renamed));
+            assertEquals("one", Files.readString(original));
+            assertEquals("two", Files.readString(renamed));
+        }
+
+        @Test
+        @DisplayName("falls back to a generated name when original filename is null")
+        void generatesNameWhenNull() throws IOException {
+            service.createSession("up5");
+            MultipartFile noName =
+                    new MockMultipartFile("file", null, "text/plain", "x".getBytes());
+            service.uploadFiles("up5", List.of(noName));
+
+            List<FileMetadata> metas = service.getSessionFiles("up5");
+            assertEquals(1, metas.size());
+            assertTrue(metas.get(0).getFilename().startsWith("upload-"));
+        }
+
+        @Test
+        @DisplayName("rejects invalid session ID before any storage")
+        void rejectsInvalidSessionId() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> service.uploadFiles("bad/id", List.of(file("a.txt", "x"))));
+        }
+
+        @Test
+        @DisplayName("uploading an empty list leaves no files")
+        void emptyListNoFiles() throws IOException {
+            service.createSession("up6");
+            service.uploadFiles("up6", List.of());
+
+            assertTrue(service.getSessionFiles("up6").isEmpty());
+        }
+    }
+
+    @Nested
+    @DisplayName("getSessionFiles")
+    class GetSessionFiles {
+
+        @Test
+        @DisplayName("returns empty list for unknown session")
+        void unknownReturnsEmpty() {
+            assertTrue(service.getSessionFiles("nope").isEmpty());
+        }
+
+        @Test
+        @DisplayName("returns a defensive copy of the metadata list")
+        void returnsDefensiveCopy() throws IOException {
+            service.createSession("g1");
+            service.uploadFiles("g1", List.of(file("a.txt", "x")));
+
+            List<FileMetadata> first = service.getSessionFiles("g1");
+            first.clear();
+
+            // Mutating the returned list must not affect the service's internal state.
+            assertEquals(1, service.getSessionFiles("g1").size());
+        }
+    }
+
+    @Nested
+    @DisplayName("getFile")
+    class GetFile {
+
+        @Test
+        @DisplayName("returns the path of an uploaded file")
+        void returnsPath() throws IOException {
+            service.createSession("f1");
+            service.uploadFiles("f1", List.of(file("doc.txt", "body")));
+
+            Path path = service.getFile("f1", "doc.txt");
+            assertTrue(Files.exists(path));
+            assertEquals("body", Files.readString(path));
+        }
+
+        @Test
+        @DisplayName("throws when the session does not exist")
+        void unknownSessionThrows() {
+            IOException ex =
+                    assertThrows(IOException.class, () -> service.getFile("ghost", "doc.txt"));
+            assertTrue(ex.getMessage().contains("Session not found"));
+        }
+
+        @Test
+        @DisplayName("throws when the file does not exist in an existing session")
+        void unknownFileThrows() throws IOException {
+            service.createSession("f2");
+            service.uploadFiles("f2", List.of(file("present.txt", "x")));
+
+            IOException ex =
+                    assertThrows(IOException.class, () -> service.getFile("f2", "missing.txt"));
+            assertTrue(ex.getMessage().contains("File not found"));
+        }
+
+        @Test
+        @DisplayName("rejects filenames containing path separators")
+        void rejectsPathSeparators() throws IOException {
+            service.createSession("f3");
+            service.uploadFiles("f3", List.of(file("ok.txt", "x")));
+
+            assertThrows(IOException.class, () -> service.getFile("f3", "../escape.txt"));
+            assertThrows(IOException.class, () -> service.getFile("f3", "sub/file.txt"));
+            assertThrows(IOException.class, () -> service.getFile("f3", "sub\\file.txt"));
+        }
+
+        @Test
+        @DisplayName("rejects blank filename")
+        void rejectsBlankFilename() throws IOException {
+            service.createSession("f4");
+            service.uploadFiles("f4", List.of(file("ok.txt", "x")));
+
+            assertThrows(IOException.class, () -> service.getFile("f4", "  "));
+        }
+    }
+
+    @Nested
+    @DisplayName("deleteFileAfterDownload")
+    class DeleteFileAfterDownload {
+
+        @Test
+        @DisplayName("deletes a single file but keeps the session if others remain")
+        void deletesOneFile() throws IOException {
+            service.createSession("d1");
+            service.uploadFiles("d1", List.of(file("a.txt", "x"), file("b.txt", "y")));
+
+            service.deleteFileAfterDownload("d1", "a.txt");
+
+            assertFalse(Files.exists(tempDir.resolve("d1").resolve("a.txt")));
+            // Session still present because not all files have been downloaded.
+            assertNotNull(service.validateSession("d1"));
+        }
+
+        @Test
+        @DisplayName("deletes the entire session once all files are marked downloaded")
+        void deletesSessionWhenAllDownloaded() throws IOException {
+            service.createSession("d2");
+            service.uploadFiles("d2", List.of(file("only.txt", "x")));
+
+            // Mark the file as downloaded via getFile, then delete it.
+            service.getFile("d2", "only.txt");
+            service.deleteFileAfterDownload("d2", "only.txt");
+
+            assertNull(service.validateSession("d2"));
+            assertFalse(Files.exists(tempDir.resolve("d2")));
+        }
+
+        @Test
+        @DisplayName("does not throw for an unknown session")
+        void unknownSessionNoThrow() {
+            assertDoesNotThrow(() -> service.deleteFileAfterDownload("ghost", "a.txt"));
+        }
+
+        @Test
+        @DisplayName("swallows invalid filename input without throwing")
+        void invalidFilenameNoThrow() throws IOException {
+            service.createSession("d3");
+            service.uploadFiles("d3", List.of(file("a.txt", "x")));
+
+            assertDoesNotThrow(() -> service.deleteFileAfterDownload("d3", "../escape.txt"));
+            // Original file untouched.
+            assertTrue(Files.exists(tempDir.resolve("d3").resolve("a.txt")));
+        }
+    }
+
+    @Nested
+    @DisplayName("deleteSession")
+    class DeleteSession {
+
+        @Test
+        @DisplayName("removes the session and all its files")
+        void removesSessionAndFiles() throws IOException {
+            service.createSession("x1");
+            service.uploadFiles("x1", List.of(file("a.txt", "x"), file("b.txt", "y")));
+
+            assertTrue(Files.exists(tempDir.resolve("x1")));
+
+            service.deleteSession("x1");
+
+            assertNull(service.validateSession("x1"));
+            assertFalse(Files.exists(tempDir.resolve("x1")));
+        }
+
+        @Test
+        @DisplayName("is a no-op for an unknown session")
+        void unknownSessionNoOp() {
+            assertDoesNotThrow(() -> service.deleteSession("never-existed"));
+        }
+    }
+
+    @Nested
+    @DisplayName("cleanupExpiredSessions")
+    class CleanupExpiredSessions {
+
+        @Test
+        @DisplayName("removes sessions past the timeout")
+        void removesExpired() throws IOException {
+            service.createSession("old");
+            service.uploadFiles("old", List.of(file("a.txt", "x")));
+            forceLastAccess("old", System.currentTimeMillis() - (20 * 60 * 1000L));
+
+            service.cleanupExpiredSessions();
+
+            assertNull(service.validateSession("old"));
+            assertFalse(Files.exists(tempDir.resolve("old")));
+        }
+
+        @Test
+        @DisplayName("keeps sessions that are still fresh")
+        void keepsFresh() {
+            service.createSession("fresh");
+
+            service.cleanupExpiredSessions();
+
+            assertNotNull(service.validateSession("fresh"));
+        }
+
+        @Test
+        @DisplayName("does not throw when there are no sessions")
+        void noSessionsNoThrow() {
+            assertDoesNotThrow(() -> service.cleanupExpiredSessions());
+        }
+    }
+
+    @Nested
+    @DisplayName("SessionInfo accessors")
+    class SessionInfoAccessors {
+
+        @Test
+        @DisplayName("exposes all constructor values")
+        void exposesValues() {
+            SessionInfo info = new SessionInfo("id", 100L, 200L, 50L);
+            assertEquals("id", info.getSessionId());
+            assertEquals(100L, info.getCreatedAt());
+            assertEquals(200L, info.getExpiresAt());
+            assertEquals(50L, info.getTimeoutMs());
+        }
+    }
+
+    @Nested
+    @DisplayName("FileMetadata accessors")
+    class FileMetadataAccessors {
+
+        @Test
+        @DisplayName("exposes all constructor values")
+        void exposesValues() {
+            FileMetadata meta = new FileMetadata("name.pdf", 1234L, "application/pdf");
+            assertEquals("name.pdf", meta.getFilename());
+            assertEquals(1234L, meta.getSize());
+            assertEquals("application/pdf", meta.getContentType());
+        }
+    }
+
+    /**
+     * Reaches into the internal SessionData for a given session and forces its lastAccessTime, used
+     * to deterministically simulate expiry without sleeping.
+     */
+    @SuppressWarnings("unchecked")
+    private void forceLastAccess(String sessionId, long lastAccessTime) {
+        java.util.Map<String, Object> sessions =
+                (java.util.Map<String, Object>)
+                        ReflectionTestUtils.getField(service, "activeSessions");
+        assertNotNull(sessions);
+        Object sessionData = sessions.get(sessionId);
+        assertNotNull(sessionData, "session not found: " + sessionId);
+        ReflectionTestUtils.setField(sessionData, "lastAccessTime", lastAccessTime);
+    }
+}

app/common/src/test/java/stirling/software/common/service/PdfMetadataServiceTest.java

@@ -0,0 +1,416 @@
+package stirling.software.common.service;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertNotNull;
+import static org.junit.jupiter.api.Assertions.assertNull;
+import static org.mockito.Mockito.lenient;
+import static org.mockito.Mockito.mock;
+import static org.mockito.Mockito.when;
+
+import java.time.LocalDateTime;
+import java.time.ZoneId;
+import java.time.ZonedDateTime;
+import java.util.Calendar;
+
+import org.apache.pdfbox.pdmodel.PDDocument;
+import org.apache.pdfbox.pdmodel.PDDocumentInformation;
+import org.apache.pdfbox.pdmodel.PDPage;
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Nested;
+import org.junit.jupiter.api.Test;
+
+import stirling.software.common.model.ApplicationProperties;
+import stirling.software.common.model.ApplicationProperties.Premium;
+import stirling.software.common.model.ApplicationProperties.Premium.ProFeatures;
+import stirling.software.common.model.ApplicationProperties.Premium.ProFeatures.CustomMetadata;
+import stirling.software.common.model.PdfMetadata;
+
+class PdfMetadataServiceTest {
+
+    private static final String LABEL = "Stirling-PDF v1.0.0";
+
+    /**
+     * Builds a service whose pro-features are disabled (real ApplicationProperties, all defaults).
+     */
+    private PdfMetadataService nonProService(UserServiceInterface userService) {
+        return new PdfMetadataService(new ApplicationProperties(), LABEL, false, userService);
+    }
+
+    @Nested
+    @DisplayName("toCalendar(ZonedDateTime)")
+    class ToCalendarTests {
+
+        @Test
+        @DisplayName("returns null for null input")
+        void nullReturnsNull() {
+            assertNull(PdfMetadataService.toCalendar(null));
+        }
+
+        @Test
+        @DisplayName("converts ZonedDateTime preserving the instant")
+        void convertsInstant() {
+            ZonedDateTime zdt = ZonedDateTime.of(2021, 6, 15, 10, 30, 45, 0, ZoneId.of("UTC"));
+            Calendar cal = PdfMetadataService.toCalendar(zdt);
+
+            assertNotNull(cal);
+            assertEquals(zdt.toInstant().toEpochMilli(), cal.getTimeInMillis());
+        }
+    }
+
+    @Nested
+    @DisplayName("parseToCalendar(String)")
+    class ParseToCalendarTests {
+
+        @Test
+        @DisplayName("returns null for null input")
+        void nullReturnsNull() {
+            assertNull(PdfMetadataService.parseToCalendar(null));
+        }
+
+        @Test
+        @DisplayName("returns null for empty / blank input")
+        void blankReturnsNull() {
+            assertNull(PdfMetadataService.parseToCalendar(""));
+            assertNull(PdfMetadataService.parseToCalendar("   "));
+        }
+
+        @Test
+        @DisplayName("returns null for unparsable input")
+        void invalidReturnsNull() {
+            assertNull(PdfMetadataService.parseToCalendar("not a date"));
+            assertNull(PdfMetadataService.parseToCalendar("2021-06-15"));
+            assertNull(PdfMetadataService.parseToCalendar("2021/13/40 99:99:99"));
+        }
+
+        @Test
+        @DisplayName("parses a valid 'yyyy/MM/dd HH:mm:ss' string")
+        void parsesValidDate() {
+            Calendar cal = PdfMetadataService.parseToCalendar("2021/06/15 10:30:45");
+            assertNotNull(cal);
+
+            // Build the expected instant the same way the implementation does so the
+            // assertion is independent of the JVM's default time zone.
+            long expectedMillis =
+                    LocalDateTime.of(2021, 6, 15, 10, 30, 45)
+                            .atZone(ZoneId.systemDefault())
+                            .toInstant()
+                            .toEpochMilli();
+            assertEquals(expectedMillis, cal.getTimeInMillis());
+        }
+    }
+
+    @Nested
+    @DisplayName("extractMetadataFromPdf(PDDocument)")
+    class ExtractMetadataTests {
+
+        @Test
+        @DisplayName("returns all-null fields for a fresh empty document")
+        void emptyDocumentYieldsNulls() throws Exception {
+            PdfMetadataService service = nonProService(null);
+            try (PDDocument doc = new PDDocument()) {
+                PdfMetadata md = service.extractMetadataFromPdf(doc);
+
+                assertNotNull(md);
+                assertNull(md.getAuthor());
+                assertNull(md.getProducer());
+                assertNull(md.getTitle());
+                assertNull(md.getCreator());
+                assertNull(md.getSubject());
+                assertNull(md.getKeywords());
+                assertNull(md.getCreationDate());
+                assertNull(md.getModificationDate());
+            }
+        }
+
+        @Test
+        @DisplayName("reads back string and date fields set on the document")
+        void readsBackPopulatedFields() throws Exception {
+            PdfMetadataService service = nonProService(null);
+            try (PDDocument doc = new PDDocument()) {
+                PDDocumentInformation info = doc.getDocumentInformation();
+                info.setAuthor("Alice");
+                info.setProducer("ProducerX");
+                info.setTitle("My Title");
+                info.setCreator("CreatorY");
+                info.setSubject("Subject Z");
+                info.setKeywords("k1, k2");
+
+                Calendar creation = Calendar.getInstance();
+                creation.setTimeInMillis(1_600_000_000_000L);
+                Calendar modification = Calendar.getInstance();
+                modification.setTimeInMillis(1_700_000_000_000L);
+                info.setCreationDate(creation);
+                info.setModificationDate(modification);
+
+                PdfMetadata md = service.extractMetadataFromPdf(doc);
+
+                assertEquals("Alice", md.getAuthor());
+                assertEquals("ProducerX", md.getProducer());
+                assertEquals("My Title", md.getTitle());
+                assertEquals("CreatorY", md.getCreator());
+                assertEquals("Subject Z", md.getSubject());
+                assertEquals("k1, k2", md.getKeywords());
+
+                assertNotNull(md.getCreationDate());
+                assertNotNull(md.getModificationDate());
+                assertEquals(1_600_000_000_000L, md.getCreationDate().toInstant().toEpochMilli());
+                assertEquals(
+                        1_700_000_000_000L, md.getModificationDate().toInstant().toEpochMilli());
+            }
+        }
+    }
+
+    @Nested
+    @DisplayName("setMetadataToPdf / setDefaultMetadata (non-pro path)")
+    class SetMetadataNonProTests {
+
+        @Test
+        @DisplayName("writes producer label, title, subject, keywords and author from metadata")
+        void writesCommonMetadata() throws Exception {
+            PdfMetadataService service = nonProService(null);
+            PdfMetadata md =
+                    PdfMetadata.builder()
+                            .author("Bob")
+                            .title("Doc Title")
+                            .subject("Doc Subject")
+                            .keywords("a, b, c")
+                            .creationDate(
+                                    ZonedDateTime.of(2020, 1, 1, 0, 0, 0, 0, ZoneId.of("UTC")))
+                            .modificationDate(
+                                    ZonedDateTime.of(2021, 1, 1, 0, 0, 0, 0, ZoneId.of("UTC")))
+                            .build();
+
+            try (PDDocument doc = new PDDocument()) {
+                doc.addPage(new PDPage());
+                service.setMetadataToPdf(doc, md);
+
+                PDDocumentInformation info = doc.getDocumentInformation();
+                assertEquals(LABEL, info.getProducer());
+                assertEquals("Doc Title", info.getTitle());
+                assertEquals("Doc Subject", info.getSubject());
+                assertEquals("a, b, c", info.getKeywords());
+                // Non-pro: author is taken verbatim from the metadata.
+                assertEquals("Bob", info.getAuthor());
+                assertNotNull(info.getModificationDate());
+            }
+        }
+
+        @Test
+        @DisplayName("existing creation date is left untouched when not newly created")
+        void keepsExistingCreationDate() throws Exception {
+            PdfMetadataService service = nonProService(null);
+            ZonedDateTime creation = ZonedDateTime.of(2019, 5, 20, 8, 15, 0, 0, ZoneId.of("UTC"));
+            PdfMetadata md = PdfMetadata.builder().title("T").creationDate(creation).build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md);
+
+                Calendar creationCal = doc.getDocumentInformation().getCreationDate();
+                // creationDate is non-null and newlyCreated=false, so setNewDocumentMetadata
+                // is skipped and no creation date is written.
+                assertNull(creationCal);
+            }
+        }
+
+        @Test
+        @DisplayName("sets a fresh creation date when metadata has none")
+        void setsCreationDateWhenMissing() throws Exception {
+            PdfMetadataService service = nonProService(null);
+            PdfMetadata md = PdfMetadata.builder().title("T").build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md);
+
+                Calendar creationCal = doc.getDocumentInformation().getCreationDate();
+                assertNotNull(creationCal);
+                // Non-pro path writes the Stirling label as the creator.
+                assertEquals(LABEL, doc.getDocumentInformation().getCreator());
+            }
+        }
+
+        @Test
+        @DisplayName("newlyCreated=true forces a fresh creation date even if metadata has one")
+        void newlyCreatedForcesCreationDate() throws Exception {
+            PdfMetadataService service = nonProService(null);
+            ZonedDateTime creation = ZonedDateTime.of(2018, 3, 3, 3, 3, 3, 0, ZoneId.of("UTC"));
+            PdfMetadata md = PdfMetadata.builder().title("T").creationDate(creation).build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md, true);
+
+                Calendar creationCal = doc.getDocumentInformation().getCreationDate();
+                assertNotNull(creationCal);
+                // The supplied creation date must have been honoured (not "now").
+                assertEquals(creation.toInstant().toEpochMilli(), creationCal.getTimeInMillis());
+                assertEquals(LABEL, doc.getDocumentInformation().getCreator());
+            }
+        }
+
+        @Test
+        @DisplayName(
+                "setDefaultMetadata round-trips existing document info through the producer label")
+        void setDefaultMetadataRewritesProducer() throws Exception {
+            PdfMetadataService service = nonProService(null);
+            try (PDDocument doc = new PDDocument()) {
+                PDDocumentInformation info = doc.getDocumentInformation();
+                info.setTitle("Original Title");
+                info.setAuthor("Original Author");
+                info.setProducer("Some Other Producer");
+
+                service.setDefaultMetadata(doc);
+
+                // extract + re-apply keeps title/author but rewrites producer to the label.
+                assertEquals("Original Title", info.getTitle());
+                assertEquals("Original Author", info.getAuthor());
+                assertEquals(LABEL, info.getProducer());
+            }
+        }
+
+        @Test
+        @DisplayName("null string fields in metadata are written through without error")
+        void handlesNullStringFields() throws Exception {
+            PdfMetadataService service = nonProService(null);
+            PdfMetadata md = PdfMetadata.builder().build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md, true);
+
+                PDDocumentInformation info = doc.getDocumentInformation();
+                assertEquals(LABEL, info.getProducer());
+                assertNull(info.getTitle());
+                assertNull(info.getSubject());
+                assertNull(info.getKeywords());
+                assertNull(info.getAuthor());
+                // newlyCreated=true always stamps a creation date.
+                assertNotNull(info.getCreationDate());
+                assertNotNull(info.getModificationDate());
+            }
+        }
+    }
+
+    @Nested
+    @DisplayName("setMetadataToPdf (pro path with custom metadata)")
+    class SetMetadataProTests {
+
+        private ApplicationProperties propsWithCustomMetadata(
+                boolean autoUpdate, String author, String creator) {
+            ApplicationProperties props = mock(ApplicationProperties.class);
+            Premium premium = mock(Premium.class);
+            ProFeatures proFeatures = mock(ProFeatures.class);
+            CustomMetadata customMetadata = mock(CustomMetadata.class);
+
+            lenient().when(props.getPremium()).thenReturn(premium);
+            lenient().when(premium.getProFeatures()).thenReturn(proFeatures);
+            lenient().when(proFeatures.getCustomMetadata()).thenReturn(customMetadata);
+            lenient().when(customMetadata.isAutoUpdateMetadata()).thenReturn(autoUpdate);
+            lenient().when(customMetadata.getAuthor()).thenReturn(author);
+            lenient().when(customMetadata.getCreator()).thenReturn(creator);
+            return props;
+        }
+
+        @Test
+        @DisplayName("uses custom author and creator when pro and auto-update enabled")
+        void appliesCustomAuthorAndCreator() throws Exception {
+            ApplicationProperties props =
+                    propsWithCustomMetadata(true, "Custom Author", "Custom Creator");
+            PdfMetadataService service = new PdfMetadataService(props, LABEL, true, null);
+
+            PdfMetadata md = PdfMetadata.builder().author("Ignored").title("T").build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md, true);
+
+                PDDocumentInformation info = doc.getDocumentInformation();
+                assertEquals("Custom Author", info.getAuthor());
+                assertEquals("Custom Creator", info.getCreator());
+                // Producer is set to the label by both setNewDocumentMetadata and
+                // setCommonMetadata.
+                assertEquals(LABEL, info.getProducer());
+            }
+        }
+
+        @Test
+        @DisplayName("replaces 'username' token with the current user when userService present")
+        void replacesUsernameToken() throws Exception {
+            ApplicationProperties props =
+                    propsWithCustomMetadata(true, "Report by username", "Creator");
+            UserServiceInterface userService = mock(UserServiceInterface.class);
+            when(userService.getCurrentUsername()).thenReturn("alice");
+
+            PdfMetadataService service = new PdfMetadataService(props, LABEL, true, userService);
+            PdfMetadata md = PdfMetadata.builder().title("T").build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md, true);
+
+                assertEquals("Report by alice", doc.getDocumentInformation().getAuthor());
+            }
+        }
+
+        @Test
+        @DisplayName("leaves 'username' token intact when current user is null")
+        void keepsTokenWhenUsernameNull() throws Exception {
+            ApplicationProperties props =
+                    propsWithCustomMetadata(true, "Report by username", "Creator");
+            UserServiceInterface userService = mock(UserServiceInterface.class);
+            when(userService.getCurrentUsername()).thenReturn(null);
+
+            PdfMetadataService service = new PdfMetadataService(props, LABEL, true, userService);
+            PdfMetadata md = PdfMetadata.builder().title("T").build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md, true);
+
+                assertEquals("Report by username", doc.getDocumentInformation().getAuthor());
+            }
+        }
+
+        @Test
+        @DisplayName("custom author applied even without a userService")
+        void appliesCustomAuthorWithoutUserService() throws Exception {
+            ApplicationProperties props = propsWithCustomMetadata(true, "Static Author", "Creator");
+            PdfMetadataService service = new PdfMetadataService(props, LABEL, true, null);
+            PdfMetadata md = PdfMetadata.builder().title("T").build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md, true);
+
+                assertEquals("Static Author", doc.getDocumentInformation().getAuthor());
+            }
+        }
+
+        @Test
+        @DisplayName("pro flag without auto-update keeps metadata author and label creator")
+        void proButAutoUpdateDisabledUsesMetadata() throws Exception {
+            ApplicationProperties props =
+                    propsWithCustomMetadata(false, "Custom Author", "Custom Creator");
+            PdfMetadataService service = new PdfMetadataService(props, LABEL, true, null);
+            PdfMetadata md = PdfMetadata.builder().author("Metadata Author").title("T").build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md, true);
+
+                PDDocumentInformation info = doc.getDocumentInformation();
+                assertEquals("Metadata Author", info.getAuthor());
+                assertEquals(LABEL, info.getCreator());
+            }
+        }
+
+        @Test
+        @DisplayName("auto-update enabled but not pro keeps metadata author and label creator")
+        void autoUpdateButNotProUsesMetadata() throws Exception {
+            ApplicationProperties props =
+                    propsWithCustomMetadata(true, "Custom Author", "Custom Creator");
+            PdfMetadataService service = new PdfMetadataService(props, LABEL, false, null);
+            PdfMetadata md = PdfMetadata.builder().author("Metadata Author").title("T").build();
+
+            try (PDDocument doc = new PDDocument()) {
+                service.setMetadataToPdf(doc, md, true);
+
+                PDDocumentInformation info = doc.getDocumentInformation();
+                assertEquals("Metadata Author", info.getAuthor());
+                assertEquals(LABEL, info.getCreator());
+            }
+        }
+    }
+}

app/common/src/test/java/stirling/software/common/service/PostHogServiceTest.java

@@ -0,0 +1,441 @@
+package stirling.software.common.service;
+
+import static org.junit.jupiter.api.Assertions.*;
+import static org.mockito.ArgumentMatchers.*;
+import static org.mockito.Mockito.*;
+
+import java.util.HashMap;
+import java.util.Map;
+
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Nested;
+import org.junit.jupiter.api.Test;
+import org.junit.jupiter.api.extension.ExtendWith;
+import org.mockito.ArgumentCaptor;
+import org.mockito.Mock;
+import org.mockito.junit.jupiter.MockitoExtension;
+import org.mockito.junit.jupiter.MockitoSettings;
+import org.mockito.quality.Strictness;
+import org.springframework.mock.env.MockEnvironment;
+
+import com.posthog.java.PostHog;
+
+import stirling.software.common.model.ApplicationProperties;
+
+@ExtendWith(MockitoExtension.class)
+@MockitoSettings(strictness = Strictness.LENIENT)
+class PostHogServiceTest {
+
+    private static final String UUID = "test-uuid-1234";
+    private static final String APP_VERSION = "9.9.9";
+
+    @Mock PostHog postHog;
+    @Mock UserServiceInterface userService;
+
+    /** Build an ApplicationProperties with analytics/posthog toggled. */
+    private ApplicationProperties props(boolean analyticsEnabled) {
+        ApplicationProperties appProps = new ApplicationProperties();
+        appProps.getSystem().setEnableAnalytics(analyticsEnabled);
+        return appProps;
+    }
+
+    /** Construct the service under test. */
+    private PostHogService newService(
+            ApplicationProperties appProps,
+            UserServiceInterface user,
+            boolean configDirMounted,
+            MockEnvironment env) {
+        return new PostHogService(
+                postHog, UUID, configDirMounted, APP_VERSION, appProps, user, env);
+    }
+
+    private MockEnvironment env() {
+        return new MockEnvironment();
+    }
+
+    @Nested
+    @DisplayName("Constructor / captureSystemInfo")
+    class ConstructorBehavior {
+
+        @Test
+        @DisplayName("constructor captures system_info when posthog is enabled")
+        void constructorCapturesWhenEnabled() {
+            ApplicationProperties appProps = props(true);
+
+            newService(appProps, userService, false, env());
+
+            verify(postHog).capture(eq(UUID), eq("system_info_captured"), anyMap());
+        }
+
+        @Test
+        @DisplayName("constructor does not capture when analytics disabled")
+        void constructorNoCaptureWhenDisabled() {
+            ApplicationProperties appProps = props(false);
+
+            newService(appProps, userService, false, env());
+
+            verify(postHog, never()).capture(anyString(), anyString(), anyMap());
+        }
+
+        @Test
+        @DisplayName("constructor does not capture when posthog explicitly disabled")
+        void constructorNoCaptureWhenPosthogOff() {
+            ApplicationProperties appProps = props(true);
+            appProps.getSystem().setEnablePosthog(false);
+
+            newService(appProps, userService, false, env());
+
+            verify(postHog, never()).capture(anyString(), anyString(), anyMap());
+        }
+
+        @Test
+        @DisplayName("constructor swallows exceptions thrown by postHog.capture")
+        void constructorSwallowsCaptureException() {
+            ApplicationProperties appProps = props(true);
+            doThrow(new RuntimeException("boom"))
+                    .when(postHog)
+                    .capture(anyString(), anyString(), anyMap());
+
+            // Must not propagate; constructor wraps capture in try/catch.
+            assertDoesNotThrow(() -> newService(appProps, userService, false, env()));
+        }
+
+        @Test
+        @DisplayName("constructor works with null userService (optional dependency)")
+        void constructorWithNullUserService() {
+            ApplicationProperties appProps = props(true);
+
+            assertDoesNotThrow(() -> newService(appProps, null, false, env()));
+            verify(postHog).capture(eq(UUID), eq("system_info_captured"), anyMap());
+        }
+    }
+
+    @Nested
+    @DisplayName("captureEvent")
+    class CaptureEvent {
+
+        @Test
+        @DisplayName("captureEvent forwards to postHog when enabled and injects app_version")
+        void captureEventWhenEnabled() {
+            ApplicationProperties appProps = props(true);
+            PostHogService service = newService(appProps, userService, false, env());
+            // Reset the constructor's capture so we only assert on captureEvent.
+            clearInvocations(postHog);
+
+            Map<String, Object> properties = new HashMap<>();
+            properties.put("foo", "bar");
+            service.captureEvent("my_event", properties);
+
+            @SuppressWarnings("unchecked")
+            ArgumentCaptor<Map<String, Object>> captor = ArgumentCaptor.forClass(Map.class);
+            verify(postHog).capture(eq(UUID), eq("my_event"), captor.capture());
+            Map<String, Object> sent = captor.getValue();
+            assertEquals("bar", sent.get("foo"));
+            assertEquals(APP_VERSION, sent.get("app_version"));
+        }
+
+        @Test
+        @DisplayName("captureEvent is a no-op when analytics disabled")
+        void captureEventWhenDisabled() {
+            ApplicationProperties appProps = props(false);
+            PostHogService service = newService(appProps, userService, false, env());
+            clearInvocations(postHog);
+
+            Map<String, Object> properties = new HashMap<>();
+            service.captureEvent("my_event", properties);
+
+            verify(postHog, never()).capture(anyString(), anyString(), anyMap());
+            // app_version must not be added when disabled (early return).
+            assertFalse(properties.containsKey("app_version"));
+        }
+
+        @Test
+        @DisplayName("captureEvent adds app_version key to the provided map")
+        void captureEventMutatesMap() {
+            ApplicationProperties appProps = props(true);
+            PostHogService service = newService(appProps, userService, false, env());
+            clearInvocations(postHog);
+
+            Map<String, Object> properties = new HashMap<>();
+            service.captureEvent("evt", properties);
+
+            assertTrue(properties.containsKey("app_version"));
+            assertEquals(APP_VERSION, properties.get("app_version"));
+        }
+    }
+
+    @Nested
+    @DisplayName("captureServerMetrics")
+    class CaptureServerMetrics {
+
+        private PostHogService disabledService() {
+            // Keep posthog disabled so the constructor performs no capture; metrics
+            // methods are independent of the enabled flag.
+            return newService(props(false), userService, true, env());
+        }
+
+        @Test
+        @DisplayName("includes core application and system metrics")
+        void includesCoreMetrics() {
+            PostHogService service = disabledService();
+
+            Map<String, Object> metrics = service.captureServerMetrics();
+
+            assertEquals(APP_VERSION, metrics.get("app_version"));
+            assertEquals(true, metrics.get("mounted_config_dir"));
+            assertNotNull(metrics.get("os_name"));
+            assertNotNull(metrics.get("java_version"));
+            assertTrue(metrics.containsKey("cpu_cores"));
+            assertTrue(metrics.containsKey("total_memory"));
+            assertTrue(metrics.containsKey("free_memory"));
+            assertTrue(metrics.containsKey("process_id"));
+            assertTrue(metrics.containsKey("jvm_uptime_ms"));
+            assertTrue(metrics.containsKey("thread_count"));
+        }
+
+        @Test
+        @DisplayName("deployment_type defaults to JAR when not docker/exe")
+        void deploymentTypeJar() {
+            PostHogService service = disabledService();
+
+            Map<String, Object> metrics = service.captureServerMetrics();
+
+            // In the unit-test environment there is no /.dockerenv and no BROWSER_OPEN.
+            assertEquals("JAR", metrics.get("deployment_type"));
+        }
+
+        @Test
+        @DisplayName("deployment_type becomes EXE when BROWSER_OPEN=true")
+        void deploymentTypeExe() {
+            MockEnvironment environment = env();
+            environment.setProperty("BROWSER_OPEN", "true");
+            PostHogService service = newService(props(false), userService, false, environment);
+
+            Map<String, Object> metrics = service.captureServerMetrics();
+
+            assertEquals("EXE", metrics.get("deployment_type"));
+        }
+
+        @Test
+        @DisplayName("BROWSER_OPEN matching is case-insensitive")
+        void deploymentTypeExeCaseInsensitive() {
+            MockEnvironment environment = env();
+            environment.setProperty("BROWSER_OPEN", "TRUE");
+            PostHogService service = newService(props(false), userService, false, environment);
+
+            Map<String, Object> metrics = service.captureServerMetrics();
+
+            assertEquals("EXE", metrics.get("deployment_type"));
+        }
+
+        @Test
+        @DisplayName("mounted_config_dir reflects the configDirMounted flag")
+        void mountedConfigDirFalse() {
+            PostHogService service = newService(props(false), userService, false, env());
+
+            Map<String, Object> metrics = service.captureServerMetrics();
+
+            assertEquals(false, metrics.get("mounted_config_dir"));
+        }
+
+        @Test
+        @DisplayName("includes total_users_created when userService present")
+        void includesUserCountWhenUserServicePresent() {
+            when(userService.getTotalUsersCount()).thenReturn(42L);
+            PostHogService service = newService(props(false), userService, false, env());
+
+            Map<String, Object> metrics = service.captureServerMetrics();
+
+            assertEquals(42L, metrics.get("total_users_created"));
+        }
+
+        @Test
+        @DisplayName("omits total_users_created when userService is null")
+        void omitsUserCountWhenUserServiceNull() {
+            PostHogService service = newService(props(false), null, false, env());
+
+            Map<String, Object> metrics = service.captureServerMetrics();
+
+            assertFalse(metrics.containsKey("total_users_created"));
+        }
+
+        @Test
+        @DisplayName("always embeds nested application_properties map")
+        void embedsApplicationProperties() {
+            PostHogService service = disabledService();
+
+            Map<String, Object> metrics = service.captureServerMetrics();
+
+            assertTrue(metrics.get("application_properties") instanceof Map);
+        }
+    }
+
+    @Nested
+    @DisplayName("captureApplicationProperties")
+    class CaptureApplicationProperties {
+
+        private PostHogService serviceWith(ApplicationProperties appProps) {
+            // Disable analytics to keep the constructor from capturing.
+            appProps.getSystem().setEnableAnalytics(false);
+            return newService(appProps, userService, false, env());
+        }
+
+        @Test
+        @DisplayName("includes blank-trimmed legal strings only when non-empty")
+        void legalPropertiesFiltered() {
+            ApplicationProperties appProps = new ApplicationProperties();
+            appProps.getLegal().setTermsAndConditions("  https://terms  ");
+            appProps.getLegal().setPrivacyPolicy(""); // blank -> skipped
+            PostHogService service = serviceWith(appProps);
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            // String values are trimmed by addIfNotEmpty.
+            assertEquals("https://terms", p.get("legal_termsAndConditions"));
+            assertFalse(p.containsKey("legal_privacyPolicy"));
+            assertFalse(p.containsKey("legal_accessibilityStatement"));
+        }
+
+        @Test
+        @DisplayName("always reports csrfDisabled true and login booleans")
+        void securityProperties() {
+            ApplicationProperties appProps = new ApplicationProperties();
+            appProps.getSecurity().setEnableLogin(true);
+            appProps.getSecurity().setLoginAttemptCount(5);
+            appProps.getSecurity().setLoginResetTimeMinutes(10);
+            PostHogService service = serviceWith(appProps);
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            assertEquals(true, p.get("security_csrfDisabled"));
+            assertEquals(true, p.get("security_enableLogin"));
+            assertEquals(5, p.get("security_loginAttemptCount"));
+            assertEquals(10L, p.get("security_loginResetTimeMinutes"));
+            assertEquals("all", p.get("security_loginMethod"));
+        }
+
+        @Test
+        @DisplayName("oauth2 nested fields are omitted when oauth2 disabled")
+        void oauth2DisabledOmitsNested() {
+            ApplicationProperties appProps = new ApplicationProperties();
+            // oauth2.enabled defaults to false.
+            PostHogService service = serviceWith(appProps);
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            assertEquals(false, p.get("security_oauth2_enabled"));
+            assertFalse(p.containsKey("security_oauth2_autoCreateUser"));
+            assertFalse(p.containsKey("security_oauth2_provider"));
+        }
+
+        @Test
+        @DisplayName("oauth2 nested fields are included when oauth2 enabled")
+        void oauth2EnabledIncludesNested() {
+            ApplicationProperties appProps = new ApplicationProperties();
+            appProps.getSecurity().getOauth2().setEnabled(true);
+            appProps.getSecurity().getOauth2().setAutoCreateUser(true);
+            appProps.getSecurity().getOauth2().setBlockRegistration(false);
+            appProps.getSecurity().getOauth2().setUseAsUsername("email");
+            appProps.getSecurity().getOauth2().setProvider("google");
+            PostHogService service = serviceWith(appProps);
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            assertEquals(true, p.get("security_oauth2_enabled"));
+            assertEquals(true, p.get("security_oauth2_autoCreateUser"));
+            assertEquals(false, p.get("security_oauth2_blockRegistration"));
+            assertEquals("email", p.get("security_oauth2_useAsUsername"));
+            assertEquals("google", p.get("security_oauth2_provider"));
+        }
+
+        @Test
+        @DisplayName("system analytics/posthog/scarf booleans are reported")
+        void systemAnalyticsBooleans() {
+            ApplicationProperties appProps = new ApplicationProperties();
+            appProps.getSystem().setEnableAnalytics(true);
+            appProps.getSystem().setEnablePosthog(true);
+            appProps.getSystem().setEnableScarf(false);
+            appProps.getSystem().setDefaultLocale("en-US");
+            PostHogService service = newService(appProps, userService, false, env());
+            // Constructor will capture once because analytics is enabled; that's fine.
+            clearInvocations(postHog);
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            assertEquals("en-US", p.get("system_defaultLocale"));
+            assertEquals(true, p.get("system_enableAnalytics"));
+            assertEquals(true, p.get("system_enablePosthog"));
+            // isScarfEnabled() is false because enableScarf is false.
+            assertEquals(false, p.get("system_enableScarf"));
+        }
+
+        @Test
+        @DisplayName("metrics_enabled and autoPipeline output folder included appropriately")
+        void metricsAndAutoPipeline() {
+            ApplicationProperties appProps = new ApplicationProperties();
+            appProps.getMetrics().setEnabled(true);
+            appProps.getAutoPipeline().setOutputFolder("/tmp/out");
+            PostHogService service = serviceWith(appProps);
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            assertEquals(true, p.get("metrics_enabled"));
+            assertEquals("/tmp/out", p.get("autoPipeline_outputFolder"));
+        }
+
+        @Test
+        @DisplayName("enterprise metadata flag omitted when premium disabled")
+        void premiumDisabledOmitsMetadata() {
+            ApplicationProperties appProps = new ApplicationProperties();
+            // premium.enabled defaults to false.
+            PostHogService service = serviceWith(appProps);
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            assertEquals(false, p.get("enterpriseEdition_enabled"));
+            assertFalse(p.containsKey("enterpriseEdition_customMetadata_autoUpdateMetadata"));
+        }
+
+        @Test
+        @DisplayName("enterprise metadata flag included when premium enabled")
+        void premiumEnabledIncludesMetadata() {
+            ApplicationProperties appProps = new ApplicationProperties();
+            appProps.getPremium().setEnabled(true);
+            appProps.getPremium().getProFeatures().getCustomMetadata().setAutoUpdateMetadata(true);
+            PostHogService service = serviceWith(appProps);
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            assertEquals(true, p.get("enterpriseEdition_enabled"));
+            assertEquals(true, p.get("enterpriseEdition_customMetadata_autoUpdateMetadata"));
+        }
+
+        @Test
+        @DisplayName("ui appNameNavbar omitted when blank, included when set")
+        void uiAppNameNavbar() {
+            ApplicationProperties blankProps = new ApplicationProperties();
+            // appNameNavbar getter returns null for blank/empty values.
+            PostHogService blankService = serviceWith(blankProps);
+            Map<String, Object> blank = blankService.captureApplicationProperties();
+            assertFalse(blank.containsKey("ui_appNameNavbar"));
+
+            ApplicationProperties namedProps = new ApplicationProperties();
+            namedProps.getUi().setAppNameNavbar("My App");
+            PostHogService namedService = serviceWith(namedProps);
+            Map<String, Object> named = namedService.captureApplicationProperties();
+            assertEquals("My App", named.get("ui_appNameNavbar"));
+        }
+
+        @Test
+        @DisplayName("returns a non-null map for a fresh ApplicationProperties")
+        void defaultsProduceNonNullMap() {
+            PostHogService service = serviceWith(new ApplicationProperties());
+
+            Map<String, Object> p = service.captureApplicationProperties();
+
+            assertNotNull(p);
+            // csrfDisabled is always added regardless of config, so map is never empty.
+            assertTrue(p.containsKey("security_csrfDisabled"));
+        }
+    }
+}

app/common/src/test/java/stirling/software/common/service/TaskManagerJobStoreDelegationTest.java

@@ -86,6 +86,8 @@ class TaskManagerJobStoreDelegationTest {
 
                     @Override
                     public boolean shouldRunLocalCleanup() {
+                        // Distributed backplanes own job TTL eviction themselves; this mock
+                        // mirrors the real ValkeyClusterBackplane override of the default true.
                         return false;
                     }
                 };

app/common/src/test/java/stirling/software/common/util/ExceptionUtilsGapTest.java

@@ -0,0 +1,738 @@
+package stirling.software.common.util;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertInstanceOf;
+import static org.junit.jupiter.api.Assertions.assertNotNull;
+import static org.junit.jupiter.api.Assertions.assertNull;
+import static org.junit.jupiter.api.Assertions.assertSame;
+import static org.junit.jupiter.api.Assertions.assertThrows;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+import static org.mockito.Mockito.mockStatic;
+
+import java.io.IOException;
+import java.util.List;
+
+import org.apache.pdfbox.pdmodel.PDPage;
+import org.apache.pdfbox.pdmodel.common.PDRectangle;
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Nested;
+import org.junit.jupiter.api.Test;
+import org.mockito.MockedStatic;
+
+import stirling.software.common.util.ExceptionUtils.BaseAppException;
+import stirling.software.common.util.ExceptionUtils.CbrFormatException;
+import stirling.software.common.util.ExceptionUtils.CbzFormatException;
+import stirling.software.common.util.ExceptionUtils.EmlFormatException;
+import stirling.software.common.util.ExceptionUtils.ErrorCode;
+import stirling.software.common.util.ExceptionUtils.FfmpegRequiredException;
+import stirling.software.common.util.ExceptionUtils.GhostscriptException;
+import stirling.software.common.util.ExceptionUtils.OutOfMemoryDpiException;
+import stirling.software.common.util.ExceptionUtils.PdfCorruptedException;
+
+/**
+ * Additional gap-filling unit tests for {@link ExceptionUtils}, covering areas not exercised by
+ * {@code ExceptionUtilsTest}: CBR/CBZ/EML factories, error-code hint/action lookups, rendering
+ * dimension validation, OOM rendering wrappers, Ghostscript output analysis, and wrapException.
+ *
+ * <p>The {@code messages} ResourceBundle is not on the common module test classpath, so {@link
+ * ExceptionUtils} falls back to the default messages baked into {@link ErrorCode}. Assertions here
+ * rely only on those default messages and on deterministic structural behavior.
+ */
+class ExceptionUtilsGapTest {
+
+    @Nested
+    @DisplayName("ErrorCode enum metadata")
+    class ErrorCodeMetadataTests {
+
+        @Test
+        @DisplayName("each error code exposes code, message key and default message")
+        void allErrorCodesHaveMetadata() {
+            for (ErrorCode code : ErrorCode.values()) {
+                assertNotNull(code.getCode(), "code for " + code);
+                assertTrue(code.getCode().startsWith("E"), "code prefix for " + code);
+                assertNotNull(code.getMessageKey(), "messageKey for " + code);
+                assertNotNull(code.getDefaultMessage(), "defaultMessage for " + code);
+                assertFalse(code.getDefaultMessage().isEmpty(), "defaultMessage empty for " + code);
+            }
+        }
+
+        @Test
+        @DisplayName("known error codes map to expected identifiers")
+        void knownErrorCodeIdentifiers() {
+            assertEquals("E001", ErrorCode.PDF_CORRUPTED.getCode());
+            assertEquals("E081", ErrorCode.OUT_OF_MEMORY_DPI.getCode());
+            assertEquals("error.pdfCorrupted", ErrorCode.PDF_CORRUPTED.getMessageKey());
+        }
+    }
+
+    @Nested
+    @DisplayName("Hints and action lookups via resource bundle")
+    class HintAndActionTests {
+
+        @Test
+        @DisplayName("getHintsForErrorCode returns empty list for null code")
+        void hintsNullCode() {
+            assertEquals(List.of(), ExceptionUtils.getHintsForErrorCode(null));
+        }
+
+        @Test
+        @DisplayName("getHintsForErrorCode returns empty list when no hints exist in bundle")
+        void hintsMissingFromBundle() {
+            // Fallback empty bundle has no hint keys, so the result is an empty list.
+            List<String> hints = ExceptionUtils.getHintsForErrorCode("E001");
+            assertNotNull(hints);
+            assertTrue(hints.isEmpty());
+        }
+
+        @Test
+        @DisplayName("getActionRequiredForErrorCode returns null for null code")
+        void actionNullCode() {
+            assertNull(ExceptionUtils.getActionRequiredForErrorCode(null));
+        }
+
+        @Test
+        @DisplayName("getActionRequiredForErrorCode returns null when key absent from bundle")
+        void actionMissingFromBundle() {
+            assertNull(ExceptionUtils.getActionRequiredForErrorCode("E001"));
+        }
+    }
+
+    @Nested
+    @DisplayName("CBR format exception factories")
+    class CbrFactoryTests {
+
+        @Test
+        @DisplayName("invalid format uses provided message when non-null")
+        void cbrInvalidFormatWithMessage() {
+            CbrFormatException ex =
+                    ExceptionUtils.createCbrInvalidFormatException("custom cbr msg");
+            assertEquals("custom cbr msg", ex.getMessage());
+            assertEquals(ErrorCode.CBR_INVALID_FORMAT.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("invalid format falls back to default message when null")
+        void cbrInvalidFormatNullMessage() {
+            CbrFormatException ex = ExceptionUtils.createCbrInvalidFormatException(null);
+            assertTrue(ex.getMessage().contains("CBR/RAR archive"));
+            assertEquals("E010", ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("encrypted CBR reuses invalid-format code")
+        void cbrEncrypted() {
+            CbrFormatException ex = ExceptionUtils.createCbrEncryptedException();
+            assertEquals(ErrorCode.CBR_INVALID_FORMAT.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("no images and corrupted images both map to CBR_NO_IMAGES")
+        void cbrNoImages() {
+            CbrFormatException noImages = ExceptionUtils.createCbrNoImagesException();
+            CbrFormatException corrupted = ExceptionUtils.createCbrCorruptedImagesException();
+            assertEquals(ErrorCode.CBR_NO_IMAGES.getCode(), noImages.getErrorCode());
+            assertEquals(ErrorCode.CBR_NO_IMAGES.getCode(), corrupted.getErrorCode());
+            assertTrue(noImages.getMessage().contains("No valid images"));
+        }
+
+        @Test
+        @DisplayName("not-a-CBR file uses CBR_NOT_CBR code")
+        void notCbr() {
+            CbrFormatException ex = ExceptionUtils.createNotCbrFileException();
+            assertEquals(ErrorCode.CBR_NOT_CBR.getCode(), ex.getErrorCode());
+            assertTrue(ex.getMessage().contains("CBR or RAR"));
+        }
+
+        @Test
+        @DisplayName(
+                "CbrFormatException is an IllegalArgumentException via BaseValidationException")
+        void cbrIsIllegalArgument() {
+            CbrFormatException ex = ExceptionUtils.createNotCbrFileException();
+            assertInstanceOf(IllegalArgumentException.class, ex);
+        }
+    }
+
+    @Nested
+    @DisplayName("CBZ format exception factories")
+    class CbzFactoryTests {
+
+        @Test
+        @DisplayName("invalid format wraps cause and uses CBZ_INVALID_FORMAT code")
+        void cbzInvalidFormat() {
+            Exception cause = new Exception("zip boom");
+            CbzFormatException ex = ExceptionUtils.createCbzInvalidFormatException(cause);
+            assertSame(cause, ex.getCause());
+            assertEquals(ErrorCode.CBZ_INVALID_FORMAT.getCode(), ex.getErrorCode());
+            assertTrue(ex.getMessage().contains("CBZ/ZIP archive"));
+        }
+
+        @Test
+        @DisplayName("empty CBZ reuses invalid-format code")
+        void cbzEmpty() {
+            CbzFormatException ex = ExceptionUtils.createCbzEmptyException();
+            assertEquals(ErrorCode.CBZ_INVALID_FORMAT.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("no images and corrupted images both map to CBZ_NO_IMAGES")
+        void cbzNoImages() {
+            CbzFormatException noImages = ExceptionUtils.createCbzNoImagesException();
+            CbzFormatException corrupted = ExceptionUtils.createCbzCorruptedImagesException();
+            assertEquals(ErrorCode.CBZ_NO_IMAGES.getCode(), noImages.getErrorCode());
+            assertEquals(ErrorCode.CBZ_NO_IMAGES.getCode(), corrupted.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("not-a-CBZ file uses CBZ_NOT_CBZ code")
+        void notCbz() {
+            CbzFormatException ex = ExceptionUtils.createNotCbzFileException();
+            assertEquals(ErrorCode.CBZ_NOT_CBZ.getCode(), ex.getErrorCode());
+            assertTrue(ex.getMessage().contains("CBZ or ZIP"));
+        }
+    }
+
+    @Nested
+    @DisplayName("EML format exception factories")
+    class EmlFactoryTests {
+
+        @Test
+        @DisplayName("empty EML uses EML_EMPTY code")
+        void emlEmpty() {
+            EmlFormatException ex = ExceptionUtils.createEmlEmptyException();
+            assertEquals(ErrorCode.EML_EMPTY.getCode(), ex.getErrorCode());
+            assertTrue(ex.getMessage().contains("EML file is empty"));
+        }
+
+        @Test
+        @DisplayName("invalid EML uses EML_INVALID_FORMAT code")
+        void emlInvalid() {
+            EmlFormatException ex = ExceptionUtils.createEmlInvalidFormatException();
+            assertEquals(ErrorCode.EML_INVALID_FORMAT.getCode(), ex.getErrorCode());
+            assertTrue(ex.getMessage().contains("Invalid EML"));
+        }
+    }
+
+    @Nested
+    @DisplayName("Image, OCR and processing factories")
+    class ImageOcrProcessingTests {
+
+        @Test
+        @DisplayName("image read exception embeds filename and has no cause")
+        void imageRead() {
+            IOException ex = ExceptionUtils.createImageReadException("photo.png");
+            assertTrue(ex.getMessage().contains("photo.png"));
+            assertNull(ex.getCause());
+        }
+
+        @Test
+        @DisplayName("image read exception rejects null filename")
+        void imageReadNullFilename() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createImageReadException(null));
+        }
+
+        @Test
+        @DisplayName("ocr invalid render type uses default message")
+        void ocrInvalidRenderType() {
+            IOException ex = ExceptionUtils.createOcrInvalidRenderTypeException();
+            assertTrue(ex.getMessage().contains("hocr"));
+        }
+
+        @Test
+        @DisplayName("ocr processing failed includes return code")
+        void ocrProcessingFailed() {
+            IOException ex = ExceptionUtils.createOcrProcessingFailedException(7);
+            assertTrue(ex.getMessage().contains("7"));
+        }
+
+        @Test
+        @DisplayName("processing interrupted wraps the InterruptedException cause")
+        void processingInterrupted() {
+            InterruptedException cause = new InterruptedException("stop");
+            IOException ex =
+                    ExceptionUtils.createProcessingInterruptedException("compression", cause);
+            assertSame(cause, ex.getCause());
+            assertTrue(ex.getMessage().contains("compression"));
+        }
+
+        @Test
+        @DisplayName("processing interrupted rejects null arguments")
+        void processingInterruptedNullArgs() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () ->
+                            ExceptionUtils.createProcessingInterruptedException(
+                                    null, new InterruptedException()));
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createProcessingInterruptedException("x", null));
+        }
+
+        @Test
+        @DisplayName("ghostscript conversion exception embeds output type")
+        void ghostscriptConversion() {
+            IOException ex = ExceptionUtils.createGhostscriptConversionException("png");
+            assertNotNull(ex.getMessage());
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createGhostscriptConversionException(null));
+        }
+    }
+
+    @Nested
+    @DisplayName("Validation factories: page size, file, ffmpeg")
+    class ValidationFactoryTests {
+
+        @Test
+        @DisplayName("invalid page size rejects null size")
+        void invalidPageSizeNull() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createInvalidPageSizeException(null));
+        }
+
+        @Test
+        @DisplayName("file null-or-empty uses FILE_NULL_OR_EMPTY default message")
+        void fileNullOrEmpty() {
+            IllegalArgumentException ex = ExceptionUtils.createFileNullOrEmptyException();
+            assertTrue(ex.getMessage().contains("null or empty"));
+        }
+
+        @Test
+        @DisplayName("file no-name uses FILE_NO_NAME default message")
+        void fileNoName() {
+            IllegalArgumentException ex = ExceptionUtils.createFileNoNameException();
+            assertTrue(ex.getMessage().contains("must have a name"));
+        }
+
+        @Test
+        @DisplayName("pdf no-pages uses PDF_NO_PAGES default message")
+        void pdfNoPages() {
+            IllegalArgumentException ex = ExceptionUtils.createPdfNoPages();
+            assertTrue(ex.getMessage().contains("no pages"));
+        }
+
+        @Test
+        @DisplayName("ffmpeg required exception exposes FFMPEG_REQUIRED code and null cause")
+        void ffmpegRequired() {
+            FfmpegRequiredException ex = ExceptionUtils.createFfmpegRequiredException();
+            assertEquals(ErrorCode.FFMPEG_REQUIRED.getCode(), ex.getErrorCode());
+            assertNull(ex.getCause());
+            assertTrue(ex.getMessage().contains("FFmpeg"));
+        }
+    }
+
+    @Nested
+    @DisplayName("ErrorCode-based argument and IO factories")
+    class ErrorCodeArgFactoryTests {
+
+        @Test
+        @DisplayName("createIllegalArgumentException(ErrorCode, args) formats default message")
+        void illegalArgumentFromErrorCode() {
+            IllegalArgumentException ex =
+                    ExceptionUtils.createIllegalArgumentException(
+                            ErrorCode.INVALID_PAGE_SIZE, "B7");
+            assertTrue(ex.getMessage().contains("B7"));
+        }
+
+        @Test
+        @DisplayName("createIllegalArgumentException rejects null ErrorCode")
+        void illegalArgumentFromNullErrorCode() {
+            ErrorCode nullCode = null;
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createIllegalArgumentException(nullCode));
+        }
+
+        @Test
+        @DisplayName("createFileProcessingException rejects null operation and cause")
+        void fileProcessingNullArgs() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createFileProcessingException(null, new Exception()));
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createFileProcessingException("op", null));
+        }
+
+        @Test
+        @DisplayName("createInvalidArgumentException rejects null name or value")
+        void invalidArgumentNullArgs() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createInvalidArgumentException(null, "v"));
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createInvalidArgumentException("n", null));
+        }
+
+        @Test
+        @DisplayName("createNullArgumentException rejects null argument name")
+        void nullArgumentNullName() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createNullArgumentException(null));
+        }
+
+        @Test
+        @DisplayName("createIOException without cause leaves cause null")
+        void ioExceptionWithoutCause() {
+            IOException ex = ExceptionUtils.createIOException("key", "msg {0}", null, "A");
+            assertEquals("msg A", ex.getMessage());
+            assertNull(ex.getCause());
+        }
+
+        @Test
+        @DisplayName("createRuntimeException without cause leaves cause null")
+        void runtimeExceptionWithoutCause() {
+            RuntimeException ex =
+                    ExceptionUtils.createRuntimeException("key", "msg {0}", null, "B");
+            assertEquals("msg B", ex.getMessage());
+            assertNull(ex.getCause());
+        }
+    }
+
+    @Nested
+    @DisplayName("createPdfCorruptedException null-cause handling")
+    class PdfCorruptedCauseTests {
+
+        @Test
+        @DisplayName("rejects null cause")
+        void nullCause() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createPdfCorruptedException("ctx", null));
+        }
+
+        @Test
+        @DisplayName("empty context behaves like no context")
+        void emptyContext() {
+            PdfCorruptedException ex =
+                    ExceptionUtils.createPdfCorruptedException("", new Exception("x"));
+            assertTrue(ex.getMessage().contains("PDF file appears to be corrupted"));
+            assertEquals(ErrorCode.PDF_CORRUPTED.getCode(), ex.getErrorCode());
+        }
+    }
+
+    @Nested
+    @DisplayName("validateRenderingDimensions")
+    class ValidateRenderingDimensionsTests {
+
+        @Test
+        @DisplayName("null page is a no-op")
+        void nullPage() {
+            // Should simply return without throwing.
+            org.junit.jupiter.api.Assertions.assertDoesNotThrow(
+                    () -> ExceptionUtils.validateRenderingDimensions(null, 1, 300));
+        }
+
+        @Test
+        @DisplayName("normal letter-size page at 150 DPI passes validation")
+        void normalPagePasses() {
+            PDPage page = new PDPage(PDRectangle.LETTER);
+            org.junit.jupiter.api.Assertions.assertDoesNotThrow(
+                    () -> ExceptionUtils.validateRenderingDimensions(page, 1, 150));
+        }
+
+        @Test
+        @DisplayName("page with zero DPI yields zero pixels and passes")
+        void zeroDpiPasses() {
+            PDPage page = new PDPage(PDRectangle.A4);
+            org.junit.jupiter.api.Assertions.assertDoesNotThrow(
+                    () -> ExceptionUtils.validateRenderingDimensions(page, 2, 0));
+        }
+    }
+
+    @Nested
+    @DisplayName("handleOomRendering wrappers")
+    class HandleOomRenderingTests {
+
+        @Test
+        @DisplayName("returns operation result on success (with page number)")
+        void successWithPage() throws IOException {
+            String result = ExceptionUtils.handleOomRendering(3, 300, () -> "ok");
+            assertEquals("ok", result);
+        }
+
+        @Test
+        @DisplayName("returns operation result on success (no page number)")
+        void successNoPage() throws IOException {
+            String result = ExceptionUtils.handleOomRendering(300, () -> "fine");
+            assertEquals("fine", result);
+        }
+
+        @Test
+        @DisplayName("propagates IOException from the operation unchanged")
+        void propagatesIoException() {
+            IOException boom = new IOException("io boom");
+            IOException thrown =
+                    assertThrows(
+                            IOException.class,
+                            () ->
+                                    ExceptionUtils.handleOomRendering(
+                                            1,
+                                            300,
+                                            () -> {
+                                                throw boom;
+                                            }));
+            assertSame(boom, thrown);
+        }
+
+        @Test
+        @DisplayName("converts OutOfMemoryError to OutOfMemoryDpiException (with page)")
+        void oomToDpiExceptionWithPage() {
+            OutOfMemoryDpiException thrown =
+                    assertThrows(
+                            OutOfMemoryDpiException.class,
+                            () ->
+                                    ExceptionUtils.handleOomRendering(
+                                            5,
+                                            300,
+                                            () -> {
+                                                throw new OutOfMemoryError("heap");
+                                            }));
+            assertEquals(ErrorCode.OUT_OF_MEMORY_DPI.getCode(), thrown.getErrorCode());
+            assertInstanceOf(OutOfMemoryError.class, thrown.getCause());
+        }
+
+        @Test
+        @DisplayName("converts NegativeArraySizeException to OutOfMemoryDpiException (no page)")
+        void negativeArraySizeToDpiExceptionNoPage() {
+            OutOfMemoryDpiException thrown =
+                    assertThrows(
+                            OutOfMemoryDpiException.class,
+                            () ->
+                                    ExceptionUtils.handleOomRendering(
+                                            300,
+                                            () -> {
+                                                throw new NegativeArraySizeException("-1");
+                                            }));
+            assertEquals(ErrorCode.OUT_OF_MEMORY_DPI.getCode(), thrown.getErrorCode());
+            assertInstanceOf(NegativeArraySizeException.class, thrown.getCause());
+        }
+    }
+
+    @Nested
+    @DisplayName("createOutOfMemoryDpiException overloads")
+    class OutOfMemoryDpiFactoryTests {
+
+        @Test
+        @DisplayName("page + dpi + Throwable wraps cause and sets code")
+        void pageDpiThrowable() {
+            Throwable cause = new IllegalStateException("too big");
+            OutOfMemoryDpiException ex =
+                    ExceptionUtils.createOutOfMemoryDpiException(4, 600, cause);
+            assertSame(cause, ex.getCause());
+            assertEquals(ErrorCode.OUT_OF_MEMORY_DPI.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("page + dpi + OutOfMemoryError overload wraps the error")
+        void pageDpiOomError() {
+            OutOfMemoryError cause = new OutOfMemoryError("oom");
+            OutOfMemoryDpiException ex =
+                    ExceptionUtils.createOutOfMemoryDpiException(2, 300, cause);
+            assertSame(cause, ex.getCause());
+        }
+
+        @Test
+        @DisplayName("dpi + Throwable overload wraps cause")
+        void dpiThrowable() {
+            Throwable cause = new RuntimeException("x");
+            OutOfMemoryDpiException ex = ExceptionUtils.createOutOfMemoryDpiException(300, cause);
+            assertSame(cause, ex.getCause());
+            assertEquals(ErrorCode.OUT_OF_MEMORY_DPI.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("dpi + OutOfMemoryError overload wraps the error")
+        void dpiOomError() {
+            OutOfMemoryError cause = new OutOfMemoryError("oom");
+            OutOfMemoryDpiException ex = ExceptionUtils.createOutOfMemoryDpiException(300, cause);
+            assertSame(cause, ex.getCause());
+        }
+
+        @Test
+        @DisplayName("rejects null cause")
+        void nullCause() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createOutOfMemoryDpiException(1, 300, (Throwable) null));
+        }
+    }
+
+    @Nested
+    @DisplayName("Ghostscript output analysis")
+    class GhostscriptAnalysisTests {
+
+        @Test
+        @DisplayName("null/blank output produces generic compression exception")
+        void blankOutput() {
+            GhostscriptException ex = ExceptionUtils.createGhostscriptCompressionException("   ");
+            assertEquals(ErrorCode.GHOSTSCRIPT_COMPRESSION.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("recognized page drawing error yields page-drawing error code")
+        void pageDrawingError() {
+            String output = "Page 3\nERROR: page drawing error encountered while processing";
+            GhostscriptException ex = ExceptionUtils.createGhostscriptCompressionException(output);
+            assertEquals(ErrorCode.GHOSTSCRIPT_PAGE_DRAWING.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("non-page-drawing output falls back to compression error code")
+        void unrecognizedOutput() {
+            String output = "Some random ghostscript chatter that is not an error marker";
+            GhostscriptException ex = ExceptionUtils.createGhostscriptCompressionException(output);
+            assertEquals(ErrorCode.GHOSTSCRIPT_COMPRESSION.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("detectGhostscriptCriticalError returns exception only for critical output")
+        void detectCritical() {
+            GhostscriptException critical =
+                    ExceptionUtils.detectGhostscriptCriticalError(
+                            "Page 1\ncould not draw this page");
+            assertNotNull(critical);
+            assertEquals(ErrorCode.GHOSTSCRIPT_PAGE_DRAWING.getCode(), critical.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("detectGhostscriptCriticalError returns null for non-critical output")
+        void detectNonCritical() {
+            assertNull(ExceptionUtils.detectGhostscriptCriticalError("just informational output"));
+            assertNull(ExceptionUtils.detectGhostscriptCriticalError(null));
+        }
+
+        @Test
+        @DisplayName("compression exception derived from cause message")
+        void compressionFromCauseMessage() {
+            GhostscriptException ex =
+                    ExceptionUtils.createGhostscriptCompressionException(
+                            new Exception("Page 2\npage drawing error"));
+            assertEquals(ErrorCode.GHOSTSCRIPT_PAGE_DRAWING.getCode(), ex.getErrorCode());
+        }
+
+        @Test
+        @DisplayName("createGhostscriptCompressionException rejects null cause overload")
+        void compressionNullCause() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.createGhostscriptCompressionException((Exception) null));
+        }
+
+        @Test
+        @DisplayName("multiple affected pages are summarized in the message")
+        void multiplePages() {
+            String output = "Page 1\npage drawing error\nPage 2\ncould not draw this page";
+            GhostscriptException ex = ExceptionUtils.createGhostscriptCompressionException(output);
+            assertEquals(ErrorCode.GHOSTSCRIPT_PAGE_DRAWING.getCode(), ex.getErrorCode());
+            assertNotNull(ex.getMessage());
+        }
+    }
+
+    @Nested
+    @DisplayName("wrapException")
+    class WrapExceptionTests {
+
+        @Test
+        @DisplayName("RuntimeException is returned unchanged")
+        void runtimePassthrough() {
+            RuntimeException original = new IllegalStateException("boom");
+            RuntimeException wrapped = ExceptionUtils.wrapException(original, "merge");
+            assertSame(original, wrapped);
+        }
+
+        @Test
+        @DisplayName("BaseAppException (IOException subtype) is wrapped in a RuntimeException")
+        void baseAppExceptionWrapped() {
+            // A corrupted-pdf IOException triggers handlePdfException -> PdfCorruptedException.
+            IOException corrupted = new IOException("Invalid PDF");
+            try (MockedStatic<PdfErrorUtils> mock = mockStatic(PdfErrorUtils.class)) {
+                mock.when(() -> PdfErrorUtils.isCorruptedPdfError(corrupted)).thenReturn(true);
+                RuntimeException wrapped = ExceptionUtils.wrapException(corrupted, "merge");
+                assertInstanceOf(BaseAppException.class, wrapped.getCause());
+            }
+        }
+
+        @Test
+        @DisplayName("plain IOException is wrapped via file-processing exception")
+        void plainIoExceptionWrapped() {
+            IOException io = new IOException("disk full");
+            try (MockedStatic<PdfErrorUtils> mock = mockStatic(PdfErrorUtils.class)) {
+                mock.when(() -> PdfErrorUtils.isCorruptedPdfError(io)).thenReturn(false);
+                RuntimeException wrapped = ExceptionUtils.wrapException(io, "split");
+                assertInstanceOf(IOException.class, wrapped.getCause());
+                assertFalse(wrapped.getCause() instanceof BaseAppException);
+            }
+        }
+
+        @Test
+        @DisplayName("checked non-IO exception is wrapped with operation context")
+        void checkedExceptionWrapped() {
+            Exception checked = new Exception("oops");
+            RuntimeException wrapped = ExceptionUtils.wrapException(checked, "convert");
+            assertSame(checked, wrapped.getCause());
+            assertTrue(wrapped.getMessage().contains("convert"));
+            assertTrue(wrapped.getMessage().contains("oops"));
+        }
+
+        @Test
+        @DisplayName("rejects null exception or operation")
+        void wrapNullArgs() {
+            assertThrows(
+                    IllegalArgumentException.class, () -> ExceptionUtils.wrapException(null, "op"));
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.wrapException(new Exception(), null));
+        }
+    }
+
+    @Nested
+    @DisplayName("logException return value and handlePdfException null guard")
+    class LogAndHandleTests {
+
+        @Test
+        @DisplayName("logException returns the same exception instance for fluent throw")
+        void logExceptionReturnsSame() {
+            Exception e = new RuntimeException("unexpected");
+            try (MockedStatic<PdfErrorUtils> mock = mockStatic(PdfErrorUtils.class)) {
+                mock.when(() -> PdfErrorUtils.isCorruptedPdfError(e)).thenReturn(false);
+                Exception returned = ExceptionUtils.logException("op", e);
+                assertSame(e, returned);
+            }
+        }
+
+        @Test
+        @DisplayName("logException rejects null operation or exception")
+        void logExceptionNullArgs() {
+            assertThrows(
+                    IllegalArgumentException.class,
+                    () -> ExceptionUtils.logException(null, new Exception()));
+            assertThrows(
+                    IllegalArgumentException.class, () -> ExceptionUtils.logException("op", null));
+        }
+
+        @Test
+        @DisplayName("handlePdfException rejects null exception")
+        void handlePdfNull() {
+            assertThrows(
+                    IllegalArgumentException.class, () -> ExceptionUtils.handlePdfException(null));
+        }
+
+        @Test
+        @DisplayName("handlePdfException with context wraps corrupted PDF and includes context")
+        void handlePdfWithContext() {
+            IOException original = new IOException("damaged");
+            try (MockedStatic<PdfErrorUtils> mock = mockStatic(PdfErrorUtils.class)) {
+                mock.when(() -> PdfErrorUtils.isCorruptedPdfError(original)).thenReturn(true);
+                IOException result = ExceptionUtils.handlePdfException(original, "during merge");
+                assertInstanceOf(PdfCorruptedException.class, result);
+                assertTrue(result.getMessage().contains("during merge"));
+            }
+        }
+    }
+}

app/common/src/test/java/stirling/software/common/util/FormUtilsGapTest.java

@@ -0,0 +1,847 @@
+package stirling.software.common.util;
+
+import static org.junit.jupiter.api.Assertions.assertEquals;
+import static org.junit.jupiter.api.Assertions.assertFalse;
+import static org.junit.jupiter.api.Assertions.assertNotNull;
+import static org.junit.jupiter.api.Assertions.assertNull;
+import static org.junit.jupiter.api.Assertions.assertTrue;
+
+import java.io.IOException;
+import java.util.ArrayList;
+import java.util.List;
+import java.util.Map;
+
+import org.apache.pdfbox.cos.COSDictionary;
+import org.apache.pdfbox.cos.COSName;
+import org.apache.pdfbox.pdmodel.PDDocument;
+import org.apache.pdfbox.pdmodel.PDPage;
+import org.apache.pdfbox.pdmodel.PDResources;
+import org.apache.pdfbox.pdmodel.common.PDRectangle;
+import org.apache.pdfbox.pdmodel.font.PDType1Font;
+import org.apache.pdfbox.pdmodel.font.Standard14Fonts;
+import org.apache.pdfbox.pdmodel.interactive.annotation.PDAnnotationWidget;
+import org.apache.pdfbox.pdmodel.interactive.form.PDAcroForm;
+import org.apache.pdfbox.pdmodel.interactive.form.PDCheckBox;
+import org.apache.pdfbox.pdmodel.interactive.form.PDComboBox;
+import org.apache.pdfbox.pdmodel.interactive.form.PDListBox;
+import org.apache.pdfbox.pdmodel.interactive.form.PDRadioButton;
+import org.apache.pdfbox.pdmodel.interactive.form.PDSignatureField;
+import org.apache.pdfbox.pdmodel.interactive.form.PDTerminalField;
+import org.apache.pdfbox.pdmodel.interactive.form.PDTextField;
+import org.junit.jupiter.api.DisplayName;
+import org.junit.jupiter.api.Nested;
+import org.junit.jupiter.api.Test;
+
+/**
+ * Gap coverage for {@link FormUtils} methods not exercised by {@code FormUtilsTest} (disabled) or
+ * {@code FormUtilsAdditionalTest}. Focuses on coordinate extraction, the page-map / repair / prune
+ * / delete / modify lifecycle, and the package-private parsing helpers.
+ */
+class FormUtilsGapTest {
+
+    private record SetupDocument(PDPage page, PDAcroForm acroForm) {}
+
+    private static SetupDocument createBasicDocument(PDDocument document) {
+        PDPage page = new PDPage();
+        document.addPage(page);
+
+        PDAcroForm acroForm = new PDAcroForm(document);
+        // Register a Helvetica font in the default resources and set a default appearance so
+        // PDFBox can write text-field values without throwing "/DA is a required entry".
+        PDResources dr = new PDResources();
+        dr.put(COSName.getPDFName("Helv"), new PDType1Font(Standard14Fonts.FontName.HELVETICA));
+        acroForm.setDefaultResources(dr);
+        acroForm.setDefaultAppearance("/Helv 12 Tf 0 g");
+        acroForm.setNeedAppearances(true);
+        document.getDocumentCatalog().setAcroForm(acroForm);
+
+        return new SetupDocument(page, acroForm);
+    }
+
+    private static void attachWidget(
+            SetupDocument setup, PDTerminalField field, PDRectangle rectangle) throws IOException {
+        PDAnnotationWidget widget = new PDAnnotationWidget();
+        widget.setRectangle(rectangle);
+        widget.setPage(setup.page());
+        // Start from an empty list: a fresh terminal field has no /Kids, so getWidgets() would
+        // return a synthetic widget wrapping the field dict itself. Re-adding that turns the field
+        // into a self-referential non-terminal field whose getWidgets() is empty.
+        List<PDAnnotationWidget> widgets = new ArrayList<>();
+        widgets.add(widget);
+        field.setWidgets(widgets);
+        setup.acroForm().getFields().add(field);
+        setup.page().getAnnotations().add(widget);
+    }
+
+    // ----------------------------------------------------------------------
+    // Constants
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("Field type constants")
+    class Constants {
+
+        @Test
+        void typeConstantsHaveExpectedValues() {
+            assertEquals("text", FormUtils.FIELD_TYPE_TEXT);
+            assertEquals("checkbox", FormUtils.FIELD_TYPE_CHECKBOX);
+            assertEquals("combobox", FormUtils.FIELD_TYPE_COMBOBOX);
+            assertEquals("listbox", FormUtils.FIELD_TYPE_LISTBOX);
+            assertEquals("radio", FormUtils.FIELD_TYPE_RADIO);
+            assertEquals("button", FormUtils.FIELD_TYPE_BUTTON);
+            assertEquals("signature", FormUtils.FIELD_TYPE_SIGNATURE);
+        }
+
+        @Test
+        void choiceFieldTypesContainsExpectedMembers() {
+            assertTrue(FormUtils.CHOICE_FIELD_TYPES.contains("combobox"));
+            assertTrue(FormUtils.CHOICE_FIELD_TYPES.contains("listbox"));
+            assertTrue(FormUtils.CHOICE_FIELD_TYPES.contains("radio"));
+            assertFalse(FormUtils.CHOICE_FIELD_TYPES.contains("text"));
+            assertEquals(3, FormUtils.CHOICE_FIELD_TYPES.size());
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // detectFieldType (choice/radio/signature/button branches)
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("detectFieldType")
+    class DetectFieldType {
+
+        @Test
+        void comboBoxDetected() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                assertEquals(
+                        "combobox", FormUtils.detectFieldType(new PDComboBox(setup.acroForm())));
+            }
+        }
+
+        @Test
+        void listBoxDetected() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                assertEquals("listbox", FormUtils.detectFieldType(new PDListBox(setup.acroForm())));
+            }
+        }
+
+        @Test
+        void radioButtonDetected() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                assertEquals(
+                        "radio", FormUtils.detectFieldType(new PDRadioButton(setup.acroForm())));
+            }
+        }
+
+        @Test
+        void signatureDetected() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                assertEquals(
+                        "signature",
+                        FormUtils.detectFieldType(new PDSignatureField(setup.acroForm())));
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // isChecked
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("isChecked")
+    class IsChecked {
+
+        @Test
+        void nullIsFalse() {
+            assertFalse(FormUtils.isChecked(null));
+        }
+
+        @Test
+        void truthyValuesAreChecked() {
+            assertTrue(FormUtils.isChecked("true"));
+            assertTrue(FormUtils.isChecked("1"));
+            assertTrue(FormUtils.isChecked("yes"));
+            assertTrue(FormUtils.isChecked("on"));
+            assertTrue(FormUtils.isChecked("checked"));
+        }
+
+        @Test
+        void truthyValuesAreCaseInsensitiveAndTrimmed() {
+            assertTrue(FormUtils.isChecked("  TRUE  "));
+            assertTrue(FormUtils.isChecked("Yes"));
+            assertTrue(FormUtils.isChecked("ON"));
+        }
+
+        @Test
+        void falsyValuesAreNotChecked() {
+            assertFalse(FormUtils.isChecked("false"));
+            assertFalse(FormUtils.isChecked("0"));
+            assertFalse(FormUtils.isChecked("off"));
+            assertFalse(FormUtils.isChecked(""));
+            assertFalse(FormUtils.isChecked("anything"));
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // safeValue
+    // ----------------------------------------------------------------------
+
+    @Test
+    void safeValueEmptyStringPassesThrough() {
+        assertEquals("", FormUtils.safeValue(""));
+    }
+
+    // ----------------------------------------------------------------------
+    // parseMultiChoiceSelections
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("parseMultiChoiceSelections")
+    class ParseMultiChoiceSelections {
+
+        @Test
+        void nullReturnsEmpty() {
+            assertTrue(FormUtils.parseMultiChoiceSelections(null).isEmpty());
+        }
+
+        @Test
+        void blankReturnsEmpty() {
+            assertTrue(FormUtils.parseMultiChoiceSelections("   ").isEmpty());
+        }
+
+        @Test
+        void splitsAndTrims() {
+            List<String> result = FormUtils.parseMultiChoiceSelections(" a , b ,c ");
+            assertEquals(List.of("a", "b", "c"), result);
+        }
+
+        @Test
+        void dropsEmptySegments() {
+            List<String> result = FormUtils.parseMultiChoiceSelections("a,,b,");
+            assertEquals(List.of("a", "b"), result);
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // filterChoiceSelections
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("filterChoiceSelections")
+    class FilterChoiceSelections {
+
+        @Test
+        void nullSelectionsReturnsEmpty() {
+            assertTrue(FormUtils.filterChoiceSelections(null, List.of("A"), "f").isEmpty());
+        }
+
+        @Test
+        void emptySelectionsReturnsEmpty() {
+            assertTrue(FormUtils.filterChoiceSelections(List.of(), List.of("A"), "f").isEmpty());
+        }
+
+        @Test
+        void selectionsOfOnlyBlanksReturnsEmpty() {
+            List<String> selections = new ArrayList<>();
+            selections.add("  ");
+            selections.add(null);
+            assertTrue(FormUtils.filterChoiceSelections(selections, List.of("A"), "f").isEmpty());
+        }
+
+        @Test
+        void matchingSelectionsAreKeptCaseInsensitively() {
+            List<String> result =
+                    FormUtils.filterChoiceSelections(
+                            List.of("apple", "BANANA"), List.of("Apple", "Banana", "Cherry"), "f");
+            // The resolved (canonical) allowed option is returned, not the input.
+            assertEquals(List.of("Apple", "Banana"), result);
+        }
+
+        @Test
+        void unsupportedSelectionsAreDropped() {
+            List<String> result =
+                    FormUtils.filterChoiceSelections(
+                            List.of("Apple", "Grape"), List.of("Apple", "Banana"), "f");
+            assertEquals(List.of("Apple"), result);
+        }
+
+        @Test
+        void missingAllowedOptionsThrows() {
+            org.junit.jupiter.api.Assertions.assertThrows(
+                    IllegalArgumentException.class,
+                    () -> FormUtils.filterChoiceSelections(List.of("Apple"), List.of(), "fieldX"));
+        }
+
+        @Test
+        void nullAllowedOptionsThrows() {
+            org.junit.jupiter.api.Assertions.assertThrows(
+                    IllegalArgumentException.class,
+                    () -> FormUtils.filterChoiceSelections(List.of("Apple"), null, "fieldX"));
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // resolveOptions / resolveDisplayOptions / collectChoiceAllowedValues
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("option resolution")
+    class OptionResolution {
+
+        @Test
+        void resolveOptionsForComboBox() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDComboBox combo = new PDComboBox(setup.acroForm());
+                combo.setOptions(List.of("Red", "Green", "Blue"));
+                List<String> options = FormUtils.resolveOptions(combo);
+                assertTrue(options.contains("Red"));
+                assertTrue(options.contains("Green"));
+                assertTrue(options.contains("Blue"));
+            }
+        }
+
+        @Test
+        void resolveOptionsForTextFieldIsEmpty() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                assertTrue(FormUtils.resolveOptions(text).isEmpty());
+            }
+        }
+
+        @Test
+        void resolveOptionsForCheckBoxUsesExportValues() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDCheckBox checkBox = new PDCheckBox(setup.acroForm());
+                checkBox.setExportValues(List.of("Yes"));
+                assertEquals(List.of("Yes"), FormUtils.resolveOptions(checkBox));
+            }
+        }
+
+        @Test
+        void resolveDisplayOptionsEmptyForTextField() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                assertTrue(FormUtils.resolveDisplayOptions(text).isEmpty());
+            }
+        }
+
+        @Test
+        void collectChoiceAllowedValuesNullReturnsEmpty() {
+            assertTrue(FormUtils.collectChoiceAllowedValues(null).isEmpty());
+        }
+
+        @Test
+        void collectChoiceAllowedValuesReturnsOptions() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDComboBox combo = new PDComboBox(setup.acroForm());
+                combo.setOptions(List.of("One", "Two"));
+                List<String> allowed = FormUtils.collectChoiceAllowedValues(combo);
+                assertTrue(allowed.contains("One"));
+                assertTrue(allowed.contains("Two"));
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // setTextValue
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("setTextValue")
+    class SetTextValue {
+
+        @Test
+        void writesValue() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("note");
+                text.setDefaultAppearance("/Helv 12 Tf 0 g");
+                attachWidget(setup, text, new PDRectangle(20, 600, 200, 20));
+
+                FormUtils.setTextValue(text, "hello world");
+                assertEquals("hello world", text.getValueAsString());
+            }
+        }
+
+        @Test
+        void nullValueWritesEmptyString() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("note");
+                text.setDefaultAppearance("/Helv 12 Tf 0 g");
+                attachWidget(setup, text, new PDRectangle(20, 600, 200, 20));
+
+                FormUtils.setTextValue(text, null);
+                assertEquals("", text.getValueAsString());
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // buildFillTemplateRecord (choice branches not covered elsewhere)
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("buildFillTemplateRecord")
+    class BuildFillTemplateRecord {
+
+        @Test
+        void comboBoxUsesCurrentValue() {
+            FormUtils.FormFieldInfo info =
+                    new FormUtils.FormFieldInfo(
+                            "color", "Color", "combobox", "Red", null, false, 0, false, null, 0);
+            Map<String, Object> result = FormUtils.buildFillTemplateRecord(List.of(info));
+            assertEquals("Red", result.get("color"));
+        }
+
+        @Test
+        void singleSelectListBoxUsesValue() {
+            FormUtils.FormFieldInfo info =
+                    new FormUtils.FormFieldInfo(
+                            "list", "List", "listbox", "Item1", null, false, 0, false, null, 0);
+            Map<String, Object> result = FormUtils.buildFillTemplateRecord(List.of(info));
+            assertEquals("Item1", result.get("list"));
+        }
+
+        @Test
+        void multiSelectListBoxUsesEmptyArray() {
+            FormUtils.FormFieldInfo info =
+                    new FormUtils.FormFieldInfo(
+                            "list", "List", "listbox", "Item1", null, false, 0, true, null, 0);
+            Map<String, Object> result = FormUtils.buildFillTemplateRecord(List.of(info));
+            Object value = result.get("list");
+            assertTrue(value instanceof List<?>);
+            assertTrue(((List<?>) value).isEmpty());
+        }
+
+        @Test
+        void nullValueDefaultsToEmptyString() {
+            FormUtils.FormFieldInfo info =
+                    new FormUtils.FormFieldInfo(
+                            "name", "Name", "text", null, null, false, 0, false, null, 0);
+            Map<String, Object> result = FormUtils.buildFillTemplateRecord(List.of(info));
+            assertEquals("", result.get("name"));
+        }
+
+        @Test
+        void entriesWithBlankNamesAreSkipped() {
+            FormUtils.FormFieldInfo blank =
+                    new FormUtils.FormFieldInfo(
+                            "  ", "Blank", "text", "x", null, false, 0, false, null, 0);
+            FormUtils.FormFieldInfo good =
+                    new FormUtils.FormFieldInfo(
+                            "kept", "Kept", "text", "x", null, false, 0, false, null, 0);
+            Map<String, Object> result = FormUtils.buildFillTemplateRecord(List.of(blank, good));
+            assertEquals(1, result.size());
+            assertTrue(result.containsKey("kept"));
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // buildAnnotationPageMap
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("buildAnnotationPageMap")
+    class BuildAnnotationPageMap {
+
+        @Test
+        void nullDocumentReturnsEmpty() {
+            assertTrue(FormUtils.buildAnnotationPageMap(null).isEmpty());
+        }
+
+        @Test
+        void emptyDocumentReturnsEmpty() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                doc.addPage(new PDPage());
+                assertTrue(FormUtils.buildAnnotationPageMap(doc).isEmpty());
+            }
+        }
+
+        @Test
+        void mapsWidgetToItsPageIndex() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("a");
+                attachWidget(setup, text, new PDRectangle(10, 10, 100, 20));
+
+                Map<COSDictionary, Integer> map = FormUtils.buildAnnotationPageMap(doc);
+                assertEquals(1, map.size());
+                assertTrue(map.containsValue(0));
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // extractFormFieldsWithCoordinates
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("extractFormFieldsWithCoordinates")
+    class ExtractFormFieldsWithCoordinates {
+
+        @Test
+        void nullDocumentReturnsEmpty() {
+            assertTrue(FormUtils.extractFormFieldsWithCoordinates(null).isEmpty());
+        }
+
+        @Test
+        void noAcroFormReturnsEmpty() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                doc.addPage(new PDPage());
+                assertTrue(FormUtils.extractFormFieldsWithCoordinates(doc).isEmpty());
+            }
+        }
+
+        @Test
+        void textFieldProducesWidgetCoordinates() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("firstName");
+                attachWidget(setup, text, new PDRectangle(50, 700, 200, 20));
+
+                List<stirling.software.common.model.FormFieldWithCoordinates> fields =
+                        FormUtils.extractFormFieldsWithCoordinates(doc);
+                assertEquals(1, fields.size());
+                stirling.software.common.model.FormFieldWithCoordinates field = fields.get(0);
+                assertEquals("firstName", field.getName());
+                assertEquals("text", field.getType());
+                assertNotNull(field.getWidgets());
+                assertEquals(1, field.getWidgets().size());
+                stirling.software.common.model.FormFieldWithCoordinates.WidgetCoordinates wc =
+                        field.getWidgets().get(0);
+                assertEquals(0, wc.getPageIndex());
+                // x is relative to crop-box origin (0 here), so it equals the lower-left x.
+                assertEquals(50f, wc.getX(), 0.01f);
+                assertEquals(200f, wc.getWidth(), 0.01f);
+                assertEquals(20f, wc.getHeight(), 0.01f);
+            }
+        }
+
+        @Test
+        void multipleFieldsAreSortedTopToBottom() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+
+                PDTextField lower = new PDTextField(setup.acroForm());
+                lower.setPartialName("lower");
+                attachWidget(setup, lower, new PDRectangle(50, 100, 200, 20));
+
+                PDTextField upper = new PDTextField(setup.acroForm());
+                upper.setPartialName("upper");
+                attachWidget(setup, upper, new PDRectangle(50, 700, 200, 20));
+
+                List<stirling.software.common.model.FormFieldWithCoordinates> fields =
+                        FormUtils.extractFormFieldsWithCoordinates(doc);
+                assertEquals(2, fields.size());
+                // The widget higher on the page (smaller CSS-y after flip) sorts first.
+                assertEquals("upper", fields.get(0).getName());
+                assertEquals("lower", fields.get(1).getName());
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // repairMissingWidgetPageReferences
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("repairMissingWidgetPageReferences")
+    class RepairMissingWidgetPageReferences {
+
+        @Test
+        void nullDocumentDoesNotThrow() {
+            FormUtils.repairMissingWidgetPageReferences(null);
+        }
+
+        @Test
+        void documentWithoutAcroFormDoesNotThrow() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                doc.addPage(new PDPage());
+                FormUtils.repairMissingWidgetPageReferences(doc);
+            }
+        }
+
+        @Test
+        void setsPageReferenceForOrphanWidget() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("orphan");
+
+                // Build a widget that is on the page's annotation list but has no /P page ref.
+                PDAnnotationWidget widget = new PDAnnotationWidget();
+                widget.setRectangle(new PDRectangle(10, 10, 100, 20));
+                List<PDAnnotationWidget> widgets = new ArrayList<>(text.getWidgets());
+                widgets.add(widget);
+                text.setWidgets(widgets);
+                setup.acroForm().getFields().add(text);
+                setup.page().getAnnotations().add(widget);
+
+                assertNull(widget.getPage());
+                FormUtils.repairMissingWidgetPageReferences(doc);
+                assertNotNull(widget.getPage());
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // deleteFormFields
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("deleteFormFields")
+    class DeleteFormFields {
+
+        @Test
+        void nullDocumentIsNoOp() {
+            FormUtils.deleteFormFields(null, List.of("a"));
+        }
+
+        @Test
+        void nullNamesIsNoOp() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                createBasicDocument(doc);
+                FormUtils.deleteFormFields(doc, null);
+            }
+        }
+
+        @Test
+        void emptyNamesIsNoOp() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                createBasicDocument(doc);
+                FormUtils.deleteFormFields(doc, List.of());
+            }
+        }
+
+        @Test
+        void removesNamedField() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField keep = new PDTextField(setup.acroForm());
+                keep.setPartialName("keep");
+                attachWidget(setup, keep, new PDRectangle(50, 700, 200, 20));
+
+                PDTextField remove = new PDTextField(setup.acroForm());
+                remove.setPartialName("remove");
+                attachWidget(setup, remove, new PDRectangle(50, 660, 200, 20));
+
+                FormUtils.deleteFormFields(doc, List.of("remove"));
+
+                List<FormUtils.FormFieldInfo> remaining = FormUtils.extractFormFields(doc);
+                assertEquals(1, remaining.size());
+                assertEquals("keep", remaining.get(0).name());
+            }
+        }
+
+        @Test
+        void unknownFieldNameIsIgnored() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField keep = new PDTextField(setup.acroForm());
+                keep.setPartialName("keep");
+                attachWidget(setup, keep, new PDRectangle(50, 700, 200, 20));
+
+                FormUtils.deleteFormFields(doc, List.of("doesNotExist", "  ", "keep"));
+                assertTrue(FormUtils.extractFormFields(doc).isEmpty());
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // modifyFormFields
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("modifyFormFields")
+    class ModifyFormFields {
+
+        @Test
+        void nullDocumentIsNoOp() {
+            FormUtils.modifyFormFields(null, List.of());
+        }
+
+        @Test
+        void nullModificationsIsNoOp() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                createBasicDocument(doc);
+                FormUtils.modifyFormFields(doc, null);
+            }
+        }
+
+        @Test
+        void emptyModificationsIsNoOp() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                createBasicDocument(doc);
+                FormUtils.modifyFormFields(doc, List.of());
+            }
+        }
+
+        @Test
+        void inPlaceRenameAndLabelUpdate() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("oldName");
+                text.setDefaultAppearance("/Helv 12 Tf 0 g");
+                attachWidget(setup, text, new PDRectangle(50, 700, 200, 20));
+
+                FormUtils.ModifyFormFieldDefinition mod =
+                        new FormUtils.ModifyFormFieldDefinition(
+                                "oldName",
+                                "newName",
+                                "New Label",
+                                null, // keep type (text) -> in-place path
+                                Boolean.TRUE,
+                                null,
+                                null,
+                                null,
+                                null);
+
+                FormUtils.modifyFormFields(doc, List.of(mod));
+
+                List<FormUtils.FormFieldInfo> fields = FormUtils.extractFormFields(doc);
+                assertEquals(1, fields.size());
+                assertEquals("newName", fields.get(0).name());
+                assertEquals("New Label", fields.get(0).label());
+                assertTrue(fields.get(0).required());
+            }
+        }
+
+        @Test
+        void unknownTargetIsSkipped() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("present");
+                attachWidget(setup, text, new PDRectangle(50, 700, 200, 20));
+
+                FormUtils.ModifyFormFieldDefinition mod =
+                        new FormUtils.ModifyFormFieldDefinition(
+                                "missing", null, null, null, null, null, null, null, null);
+
+                FormUtils.modifyFormFields(doc, List.of(mod));
+
+                // Untouched field remains.
+                List<FormUtils.FormFieldInfo> fields = FormUtils.extractFormFields(doc);
+                assertEquals(1, fields.size());
+                assertEquals("present", fields.get(0).name());
+            }
+        }
+
+        @Test
+        void nullEntriesAndBlankTargetsAreSkipped() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("present");
+                attachWidget(setup, text, new PDRectangle(50, 700, 200, 20));
+
+                List<FormUtils.ModifyFormFieldDefinition> mods = new ArrayList<>();
+                mods.add(null);
+                mods.add(
+                        new FormUtils.ModifyFormFieldDefinition(
+                                "  ", null, null, null, null, null, null, null, null));
+
+                FormUtils.modifyFormFields(doc, mods);
+                assertEquals(1, FormUtils.extractFormFields(doc).size());
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // pruneOrphanedFormFields
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("pruneOrphanedFormFields")
+    class PruneOrphanedFormFields {
+
+        @Test
+        void nullDocumentIsNoOp() {
+            FormUtils.pruneOrphanedFormFields(null);
+        }
+
+        @Test
+        void documentWithoutAcroFormIsNoOp() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                doc.addPage(new PDPage());
+                FormUtils.pruneOrphanedFormFields(doc);
+                assertNull(doc.getDocumentCatalog().getAcroForm(null));
+            }
+        }
+
+        @Test
+        void keepsFieldsWithLiveWidgets() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("live");
+                attachWidget(setup, text, new PDRectangle(50, 700, 200, 20));
+
+                FormUtils.pruneOrphanedFormFields(doc);
+
+                PDAcroForm form = doc.getDocumentCatalog().getAcroForm(null);
+                assertNotNull(form);
+                assertEquals(1, form.getFields().size());
+            }
+        }
+
+        @Test
+        void dropsAcroFormWhenAllWidgetsOrphaned() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                SetupDocument setup = createBasicDocument(doc);
+                PDTextField text = new PDTextField(setup.acroForm());
+                text.setPartialName("orphan");
+                attachWidget(setup, text, new PDRectangle(50, 700, 200, 20));
+
+                // Remove the widget from the page so it is no longer "live".
+                setup.page().getAnnotations().clear();
+
+                FormUtils.pruneOrphanedFormFields(doc);
+
+                assertNull(doc.getDocumentCatalog().getAcroForm(null));
+            }
+        }
+    }
+
+    // ----------------------------------------------------------------------
+    // hasAnyRotatedPage (rotated branch)
+    // ----------------------------------------------------------------------
+
+    @Nested
+    @DisplayName("hasAnyRotatedPage")
+    class HasAnyRotatedPage {
+
+        @Test
+        void rotatedPageDetected() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                PDPage page = new PDPage();
+                page.setRotation(90);
+                doc.addPage(page);
+                assertTrue(FormUtils.hasAnyRotatedPage(doc));
+            }
+        }
+
+        @Test
+        void unrotatedPageNotDetected() throws IOException {
+            try (PDDocument doc = new PDDocument()) {
+                doc.addPage(new PDPage());
+                assertFalse(FormUtils.hasAnyRotatedPage(doc));
+            }
+        }
+    }
+}