## Fix 1 — Viewer bug (8 tools)
8 tools called `useFileSelection()` directly instead of routing through
`useBaseTool`. In the viewer, this meant they operated on **all selected
files**
instead of only the one being viewed. For example: 10 files loaded,
viewing
file 3, running Add Stamp — all 10 files got stamped.
**Root cause:** These tools had no view-scope awareness.
`useFileSelection()`
returns the raw workbench selection with no knowledge of which file is
active in
the viewer.
**Fix:** A new hook `useViewScopedFiles` was introduced:
```ts
// Viewer → only the active file
// Everywhere else → all loaded files
const selectedFiles = useViewScopedFiles();
```
The 8 tools were updated to call this instead of `useFileSelection()`.
**Tools fixed:** Add Stamp, Add Watermark, Add Password, Add Page
Numbers,
Add Attachments, Reorganize Pages, OCR, Convert
---
## Fix 2 — Page selector / active files context (all tools)
`useBaseTool` returned `selectedFiles` (checked files only) in
non-viewer
contexts. In the page selector this is typically empty or stale — not
the full
set of loaded files that tools should operate on.
**Fix:** `useBaseTool` was updated to use `useViewScopedFiles`, which
returns
all loaded files in non-viewer contexts. This affected every tool via
`useBaseTool`.
---
## Workarounds for Compare & Merge
Two tools intentionally need all loaded files regardless of view, so
they use
`ignoreViewerScope: true` in `useBaseTool`.
**Compare** — needs exactly 2 files for its Original/Edited slots.
Scoping to
one file would break the comparison entirely. `ignoreViewerScope: true`
is set
and `disableScopeHints: true` hides the "(this file)" button label hint.
The
slot auto-mapping logic was also improved alongside this fix.
**Merge** — needs 2+ files; merging a single file is meaningless. Rather
than
leaving the button silently disabled, Merge now:
- Auto-redirects to the active files view on first open from the viewer
- If the user navigates back to the viewer, shows a disabled button with
a hint
and a "Go to active files view" shortcut button
---
## How to Test
---
## Fix 1 — 8 tools (viewer scoping)
### Test steps (same for each)
1. Load 3 PDFs into workbench
2. Open viewer, navigate to file 2
3. Open the tool, configure settings, run
4. ✅ Only file 2 is in the results
5. ✅ Button label shows **"[Action] (this file)"**
6. ✅ A note below the button reads **"Only applying to: [filename]"**
| Tool | What to configure |
|---|---|
| **Add Stamp** | Enter any text stamp or upload an image stamp |
| **Add Watermark** | Select text watermark, enter any text |
| **Add Page Numbers** | Leave defaults |
| **Add Password** | Enter any owner + user password |
| **Add Attachments** | Attach any small file |
| **Reorganize Pages** | Enter a page range e.g. `1,2` |
| **OCR** | Leave default language |
| **Convert** | Convert PDF → any format |
---
## Fix 2 — All tools (page selector context)
### Test steps
1. Load 3 PDFs into workbench
2. Open the page selector view
3. Open any tool from the sidebar, run it
4. ✅ All 3 files are processed (not zero or a stale subset)
---
## Compare (intentionally ignores view scope)
**A — Auto-fill with exactly 2 files**
1. Load exactly 2 PDFs
2. Open Compare from either the viewer or active files view
3. ✅ Both slots are filled automatically (Original + Edited)
4. ✅ No scope hint appears on the button
**B — Manual selection with 3+ files**
1. Load 3+ PDFs
2. Open Compare
3. ✅ The first 2 files fill the slots
4. ✅ A 3rd file does not add a 3rd slot (capped at 2)
**C — File removed mid-session**
1. Load 2 PDFs, let Compare auto-fill both slots
2. Remove one file from the workbench
3. ✅ The corresponding slot clears; the other slot is unchanged
**D — Viewer mode**
1. Load 2 PDFs, open viewer
2. Open Compare from the viewer sidebar
3. ✅ Both files are still available for slot selection (not scoped to
current file)
---
## Merge (intentionally ignores view scope, disabled in viewer)
**A — Auto-redirect on first open from viewer**
1. Load 2+ PDFs, open the viewer
2. Open Merge from the viewer sidebar
3. ✅ Immediately redirected to the active files view
**B — Viewer mode disabled state (after navigating back)**
1. From the active files view, open Merge, then navigate back to the
viewer
2. ✅ Execute button is **disabled** with tooltip "Switch to the file
editor to select multiple files"
3. ✅ A note appears: *"Merge needs 2 or more files. Head to the file
editor to select them."*
4. ✅ A **"Go to active files view"** button is shown; clicking it
navigates back
**C — Active files view works normally**
1. Load 3 PDFs, open Merge from the active files view
2. ✅ All 3 files appear in the merge list
3. ✅ Button shows **"Merge (3 files)"**
4. Run the merge
5. ✅ Output is a single PDF containing all 3 files
---
## Button label behaviour (all tools)
| Context | Expected button text |
|---|---|
| Viewer, 1 file loaded | `[Action]` (no suffix) |
| Viewer, 2+ files loaded | `[Action] (this file)` |
| Active files view, 1 file loaded | `[Action]` (no suffix) |
| Active files view, 2+ files loaded | `[Action] (N files)` |
| Merge in viewer | disabled — no suffix |
| Compare | never shows scope suffix (`disableScopeHints: true`) |
---------
Co-authored-by: Reece Browne <74901996+reecebrowne@users.noreply.github.com>
# Description of Changes
Preserve the translated zh-TW tags while restoring the English aliases
used by frontend tool search.
This keeps common English technical queries such as permissions or
access control discoverable in the zh-TW locale.
---
## Checklist
### General
- [x] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [x] I have performed a self-review of my own code
- [x] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [x] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
## GitHub Copilot Pull Reuqest summary
> This pull request significantly expands the keyword tags for a wide
range of PDF-related tools and actions in the Traditional Chinese
(`zh-TW`) translation file. The main goal is to improve searchability
and discoverability of features by including a comprehensive set of
English and Chinese keywords, synonyms, and related phrases for each
tool.
>
> The most important changes include:
>
> **Localization and Search Optimization:**
>
> * Expanded the `tags` fields for all tools and actions under the
`[home.*]` sections in `frontend/public/locales/zh-TW/translation.toml`
to include a broad set of English and Chinese keywords, synonyms, and
common search phrases. This enhances feature discoverability for users
searching in either language.
[[1]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L3885-R3925)
[[2]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L3934-R4039)
[[3]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L4054-R4209)
[[4]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L4218-R4218)
>
> **Consistency and Coverage:**
>
> * Ensured that each tool/action now has a rich set of tags that cover
various ways users might refer to the feature, including technical
terms, synonyms, and related concepts (e.g., "merge", "combine", "join"
for PDF merging).
[[1]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L3885-R3925)
[[2]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L3934-R4039)
[[3]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L4054-R4209)
[[4]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L4218-R4218)
>
> **Internationalization Improvements:**
>
> * Added English keywords alongside Chinese ones to support bilingual
search and better serve users who may search using English terms in a
localized interface.
[[1]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L3885-R3925)
[[2]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L3934-R4039)
[[3]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L4054-R4209)
[[4]](diffhunk://#diff-5979ec7aabfd804ffe625390faee80bfc5b97bdb00f72cc3ce27359f82450e87L4218-R4218)
>
> These changes collectively make it easier for users to find the
features they need, regardless of the language or terminology they use.
## Summary
- Added "Alpha" badge to the File Storage & Sharing nav item in the
settings sidebar
- Added "Alpha" badge to the File Storage & Sharing page title
- Removed the old inline "(Alpha)" text from the Enable Group Signing
label
- Restructured all toggle cards so the switch is anchored to the right
of each row
- Tightened spacing between cards for a more compact layout
- Extended `ConfigNavItem` interface with optional `badge` and
`badgeColor` fields for reuse elsewhere
<img width="1696" height="1057" alt="image"
src="https://github.com/user-attachments/assets/77ac8276-ed65-4cae-8470-65de8f56dd74"
/>
## Summary
This PR adds full desktop (Tauri) support for the shared signing feature
when connected to a self-hosted server, and fixes several bugs
discovered during that work.
### Feature gating
Shared signing, file sharing, and share links are proprietary server
features that require an authenticated self-hosted session. Previously
these were read directly from `config` with no awareness of connection
mode or auth state, meaning the UI could appear in SaaS/local mode or
when logged out.
- Introduce `useGroupSigningEnabled` and `useSharingEnabled` hooks with
core implementations (web behaviour unchanged) and desktop overrides
that require `selfhosted` mode + an active authenticated session
- Extract shared subscription logic into `useSelfHostedAuth` (connection
mode + auth state + config refetch)
- `QuickAccessBar` now derives all three flags from the hooks instead of
raw config
### Config timing fix
When a user logs in via the SetupWizard, the `jwt-available` event fires
a config fetch *before* the mode is switched to `selfhosted`. This meant
the config was fetched from the local bundled backend (port ~59567)
which has no knowledge of `storageGroupSigningEnabled`, causing the
group signing button to stay hidden until a full page refresh.
`useSelfHostedAuth` detects the mode transition and triggers a fresh
config fetch at the correct moment, after the self-hosted URL is active.
### Bug fixes
**`SignPopout.tsx`** — Manually setting `Content-Type:
multipart/form-data` on two `FormData` POST requests stripped the
auto-generated boundary, causing a `400 bad multipart` from the server.
Removed the explicit headers so Axios sets them correctly.
**`tauriHttpClient.ts`** — `response.json()` was called before
`response.ok` was checked. A plain-text error body from the server (e.g.
`"Cannot sign..."`) caused a `SyntaxError` that fell into the network
error catch block and was reported as `ERR_NETWORK`, hiding the real
failure. The fix checks `response.ok` first, reads error bodies as text,
and handles empty 200 bodies (returning `null` instead of throwing).
---
## Testing
### Prerequisites
- Desktop app running in self-hosted mode pointed at a local
Stirling-PDF instance (`http://localhost:8080`)
- The self-hosted instance has group signing and storage enabled in
settings
- At least two user accounts on the self-hosted instance
### 1. Feature gating — group signing button
| Step | Expected |
|---|---|
| Open the desktop app in **local mode** (no server configured) | Group
signing button absent from QuickAccessBar |
| Switch to self-hosted mode but **do not log in** | Group signing
button absent |
| Log in to the self-hosted server | Group signing button appears
without requiring a page refresh |
| Log out | Group signing button disappears immediately |
| Log back in | Group signing button reappears without a page refresh |
### 2. Feature gating — file sharing
Repeat the same steps above, verifying the share and share-link buttons
in the file manager follow the same visibility rules.
### 3. Create a signing session
1. Log in, open the group signing panel from QuickAccessBar
2. Select a PDF, add a participant, configure signature defaults and
submit
3. Verify the session is created successfully (no `400 bad multipart`
error)
### 4. Participant signing
1. As the invited participant, open the signing request from
QuickAccessBar
2. Upload or draw a signature and submit
3. Verify signing completes successfully (no `ERR_NETWORK` error)
### 5. Error surfacing
1. Attempt an action that the server rejects (e.g. sign a document with
an invalid certificate)
2. Verify the actual server error message is shown rather than a generic
network error
# Description of Changes
Adds an eslint rule to disallow importing any Tauri APIs outside the
desktop folder to help hint to developers that they should be following
the frontend architecture.
While doing this, I also discovered that you can provide a custom
message in the `no-restricted-imports` rule, which is nicer than the
comments that I'd previously added to the eslint config file to explain
why they weren't allowed:
```text
/Users/jamesbrunton/Dev/spdf1/frontend/src/core/components/shared/config/configSections/GeneralSection.tsx
19:1 error 'src/core/contexts/PreferencesContext' import is restricted from being used by a pattern. Use @app/* imports instead of absolute src/ imports no-restricted-imports
20:1 error '../../../../../core/contexts/AppConfigContext' import is restricted from being used by a pattern. Use @app/* imports instead of relative imports no-restricted-imports
21:1 error '@tauri-apps/core' import is restricted from being used by a pattern. Tauri APIs are desktop-only. Review frontend/DeveloperGuide.md for structure advice no-restricted-imports
```
## Fix Playwright E2E tests and expand CI to run full suite
### Problem
The full Playwright suite was broken in two ways:
1. **`ConvertE2E.spec.ts` crashed at import time** —
`conversionEndpointDiscovery.ts` imported a React hook at the top level,
which pulled in the entire component tree. That chain eventually
required `material-symbols-icons.json` (a generated file that didn't
exist), crashing module resolution before any tests ran.
2. **CI only ran cert validation tests** — both `build.yml` and
`nightly.yml` hardcoded `src/core/tests/certValidation` as the test
path, silently ignoring everything else.
### Changes
**`ConvertE2E.spec.ts` — complete rewrite**
The old tests were useless in practice: all 9 dynamic conversion tests
were permanently skipped unless a real Spring Boot backend was running
(they called a live `/api/v1/config/endpoints-enabled` endpoint at
module load time). Replaced with 4 focused tests that use `page.route()`
mocking — no backend required, same pattern as
`CertificateValidationE2E`.
New tests cover:
- Convert button absent before a format pair is selected
- Successful PDF→PNG conversion shows a download button (mocked API
response)
- API error surfaces as an error notification
- Convert button appears and is enabled after selecting valid formats
**`conversionEndpointDiscovery.ts` — deleted**
Only existed to support the old tests. The `useConversionEndpoints`
React hook it exported was never imported anywhere else.
**`ReviewToolStep.tsx`**
Added `data-testid="download-result-button"` to the download button —
required for the happy-path test assertion.
**CI workflows (`build.yml`, `nightly.yml`)**
- Added a `Generate icons` step before Playwright runs (`node
scripts/generate-icons.js`) — the icon JSON is generated by `npm run
dev` locally but skipped by `npm ci` in CI
- Removed the `src/core/tests/certValidation` path filter so the full
suite runs
## PR: Certificate Pre-Validation for Document Signing
### Problem
When a participant uploaded a certificate to sign a document, there was
no validation at submission time. If the certificate had the wrong
password, was expired, or was incompatible with the signing algorithm,
the error only surfaced during **finalization** — potentially days
later, after all other participants had signed. At that point the
session is stuck with no way to recover.
Additionally, `buildKeystore` in the finalization service only
recognised `"P12"` as a cert type, causing a `400 Invalid certificate
type: PKCS12` error when the **owner** signed using the standard
`PKCS12` identifier.
---
### What this PR does
#### Backend — Certificate pre-validation service
Adds `CertificateSubmissionValidator`, which validates a keystore before
it is stored by:
1. Loading the keystore with the provided password (catches wrong
password / corrupt file)
2. Checking the certificate's validity dates (catches expired and
not-yet-valid certs)
3. Test-signing a blank PDF using the same `PdfSigningService` code path
as finalization (catches algorithm incompatibilities)
This runs on both the participant submission endpoint
(`WorkflowParticipantController`) and the owner signing endpoint
(`SigningSessionController`), so both flows are protected.
#### Backend — Bug fix
`SigningFinalizationService.buildKeystore` now accepts `"PKCS12"` and
`"PFX"` as aliases for `"P12"`, consistent with how the validator
already handles them. This fixes a `400` error when the owner signed
using the `PKCS12` cert type.
#### Frontend — Real-time validation feedback
`ParticipantView` gains a debounced validation call (600ms) triggered
whenever the cert file or password changes. The UI shows:
- A spinner while validating
- Green "Certificate valid until [date] · [subject name]" on success
- Red error message on failure (wrong password, expired, not yet valid)
- The submit button is disabled while validation is in flight
#### Tests — Three layers
| Layer | File | Coverage |
|---|---|---|
| Service unit | `CertificateSubmissionValidatorTest` | 11 tests — valid
P12/JKS, wrong password, corrupt bytes, expired, not-yet-valid, signing
failure, cert type aliases |
| Controller unit | `WorkflowParticipantValidateCertificateTest` | 4
tests — valid cert, invalid cert, missing file, invalid token |
| Controller integration | `CertificateValidationIntegrationTest` | 6
tests — real `.p12`/`.jks` files through the full controller → validator
stack |
| Frontend E2E | `CertificateValidationE2E.spec.ts` | 7 Playwright tests
— all feedback states, button behaviour, SERVER type bypass |
#### CI
- **PR**: Playwright runs on chromium when frontend files change (~2-3
min)
- **Nightly / on-demand**: All three browsers (chromium, firefox,
webkit) at 2 AM UTC, also manually triggerable via `workflow_dispatch`
# Description of Changes
Redesign the Python AI engine to be properly agentic and make use of
`pydantic-ai` instead of `langchain` for correctness and ergonomics.
This should be a good foundation for us to build our AI engine on going
forwards.
# Description of Changes
Improves PDF rendering in the viewer by adding digital signature field
support,
cleaning up overlay rendering, and migrating the contrast tool off
pdf-lib to PDFium WASM.
### Signature Field Overlay
- Added `SignatureFieldOverlay` component that renders digital signature
form fields
- Renders appearance streams when present; shows a fallback badge for
unsigned fields
- Uses PDFium WASM for bitmap extraction
### Overlay Rendering
- Integrated `SignatureFieldOverlay` and `ButtonAppearanceOverlay` into
`LocalEmbedPDF`
- Overlays are now clipped to page boundaries
- Clarified in `EmbedPdfViewer` that frontend overlays use PDFium WASM,
backend overlays use PDFBox
### Contrast Tool Migration
- Replaced pdf-lib with PDFium WASM in `useAdjustContrastOperation`
- PDF page creation and image embedding now go through PDFium APIs
directly
- Updated bitmap handling and memory management accordingly
### Cleanup
- Fixed import ordering in viewer components
- Removed stale comments in the contrast operation hook
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Co-authored-by: Reece Browne <74901996+reecebrowne@users.noreply.github.com>
# Description of Changes
Currently, cmd-r is set to rotate the PDF in the viewer instead of
perform refresh in the browser. This is unintuitive and confusing for
Mac users, and for Windows users (who are less used to doing ctrl-r for
refresh) it only works some of the time, if the Viewer is active, so
removing the override is no great loss.
# Description of Changes
Add frontend developer guide describing the path alias architecture.
There's probably more needed in here which we should flesh out over
time, but this is a start.
## Description
Adds an explicit **“Save As”** button to the desktop viewer so users can
always save a copy of the current PDF to a different location, even if
the original file already has a local path.
This complements the existing smart **Save/Download** behavior:
- The existing download button continues to either save back to the
original path (when available) or prompt for a path when needed.
- The new **Save As** button always opens a save dialog to choose a
location/name for a new copy.
## Changes
- **RightRail (viewer controls)**
- Added a new **Save As** action icon in the right rail settings
section.
- The button:
- Uses `viewerContext.exportActions.saveAsCopy()` to get the current
viewer state as a PDF.
- Calls `downloadFile` without a `localPath`, ensuring the desktop app
shows a **Save As** dialog.
- Picks the first selected file (if any) or the first active file as the
source for the filename.
- **Desktop / Web behavior**
- In the desktop app (Tauri), clicking **Save As**:
- Opens a native save dialog so the user can choose a different folder
and filename.
- Writes a new copy without changing the existing file’s `localFilePath`
or dirty state.
- In the web app, the button behaves like a standard download of a copy
(browser-controlled save dialog / download).
## Motivation
- Users often want to apply operations on a PDF while **keeping the
original unmodified**.
- The existing smart Save behavior chooses between Save and Save As
automatically, but there was no way to explicitly request **Save As**.
- This change gives desktop users a clear, dedicated **“Save As”**
control while preserving the current Save/Download behavior.
## Notes
- No backend changes.
- No changes to the existing Save / Download button behavior.
- The new button uses existing viewer export and download utilities,
minimizing new logic.
---------
Co-authored-by: James Brunton <james@stirlingpdf.com>
Tested:
* Can sign in on saas -> can run local tools with or without credits->
can run saas only tools (if credits) -> can't run saas only tools
without credits
* Can sign in self-hosted -> can run all tools on remote if available ->
can run local when self-hosted unavailable
Clouds show on saas tools when connected
Tools are disabled when connected to self-hosted but cannot find server.
You also get banner
#cantwaitforplaywritetests
# Description of Changes
Ages ago I made #4835 to try and fix all the `any` type usage in the
system but never got it finished, and there were just too many to review
and ensure it still worked. There's even more now.
My new tactic is to fix folder by folder. This fixes the `any` typing in
the `saas/` folder, and also enables `no-unnecessary-type-assertion`,
which really helps reduce pointless `as` casts that AI generates when
the type is already known. I hope to expand both of these to the rest of
the folders soon, but one folder is better than none.
# Description of Changes
Fix#5164
As I mentioned on the bug
https://github.com/Stirling-Tools/Stirling-PDF/issues/5164#issuecomment-4045170827,
it's impossible to print on Mac currently because
`iframe.contentWindow?.print()` silently does nothing in Tauri on Mac,
but [it seems unlikely that this will be
fixed](https://github.com/tauri-apps/tauri/issues/13451#issuecomment-4048075861).
Instead, I've linked directly to the Mac `PDFKit` framework in Rust to
use its printing functionality instead of Safari's. I believe that
`PDFKit` is what `Preview.app` is using and the print UI that it
generates seems to perform identically, so this should solve the issue
on Mac. Hopefully one day the TS iframe print API will be fixed and
we'll be able to get rid of this code, or [there'll be an official Tauri
plugin for printing which we can use
instead](https://github.com/tauri-apps/plugins-workspace/issues/293).
This implementation should be entirely Mac-specific. Windows & Linux
will continue to use their TS printing (which comes from EmbedPDF)
unless we have a good reason to change them to use a native solution as
well.
* Text box/notes movement improvements ✅
* Fix the issue where hiding, then showing annotations looses progress ✅
* Fix the issue where hidig/showing annotations jumps you back up to the
top of your open document ✅
* Support ctrl+c and ctrl+v and backspace to delete ✅
* Better handling when moving to different tool from annotate ✅
* Added a color picker eyedropper button ✅
* Auto-switch to Select after note/text placement, so users can quickly
place and type ✅
# Description of Changes
Previously, `VITE_*` environment variables were scattered across the
codebase with hardcoded fallback values inline (e.g.
`import.meta.env.VITE_STRIPE_KEY || 'pk_live_...'`). This made it
unclear which variables
were required, what they were for, and caused real keys to be silently
used in builds where they hadn't been explicitly configured.
## What's changed
I've added `frontend/.env.example` and `frontend/.env.desktop.example`,
which declare every `VITE_*` variable the app uses, with comments
explaining each one and sensible defaults where applicable. These
are the source of truth for what's required.
I've added a setup script which runs before `npm run dev`, `build`,
`tauri-dev`, and all `tauri-build*` commands. It:
- Creates your local `.env` / `.env.desktop` from the example files on
first run, so you don't need to do anything manually
- Errors if you're missing keys that the example defines (e.g. after
pulling changes that added a new variable). These can either be
manually-set env vars, or in your `.env` file (env vars take precedence
over `.env` file vars when running)
- Warns if you have `VITE_*` variables set in your environment that
aren't listed in any example file
I've removed all `|| 'hardcoded-value'` defaults from source files
because they are not necessary in this system, as all variables must be
explicitly set (they can be set to `VITE_ENV_VAR=`, just as long as the
variable actually exists). I think this system will make it really
obvious exactly what you need to set and what's actually running in the
code.
I've added a test that checks that every `import.meta.env.VITE_*`
reference found in source is present in at least one example file, so
new variables can't be added without being documented.
## For contributors
New contributors shouldn't need to do anything - `npm run dev` will
create your `.env` automatically.
If you already have a `.env` file in the `frontend/` folder, you may
well need to update it to make the system happy. Here's an example
output from running `npm run dev` with an old `.env` file:
```
$ npm run dev
> frontend@0.1.0 dev
> npm run prep && vite
> frontend@0.1.0 prep
> tsx scripts/setup-env.ts && npm run generate-icons
setup-env: see frontend/README.md#environment-variables for documentation
setup-env: .env is missing keys from config/.env.example:
VITE_GOOGLE_DRIVE_CLIENT_ID
VITE_GOOGLE_DRIVE_API_KEY
VITE_GOOGLE_DRIVE_APP_ID
VITE_PUBLIC_POSTHOG_KEY
VITE_PUBLIC_POSTHOG_HOST
Add them manually or delete your local file to re-copy from the example.
setup-env: the following VITE_ vars are set but not listed in any example file:
VITE_DEV_BYPASS_AUTH
Add them to config/.env.example or config/.env.desktop.example if they are required.
```
If you add a new `VITE_*` variable to the codebase, add it to the
appropriate `frontend/config/.env.example` file or the test will fail.
# Description of Changes
Inspired by https://github.com/pydantic/pydantic-ai/pull/4169, this PR
moves our `CLAUDE.md` advice to the more generic `AGENTS.md` file (which
works on Codex, Gemini, etc). It also adds a symlink from `CLAUDE.md` to
`AGENTS.md`, which Claude follows properly, so all AIs should get the
same advice and we only need to keep one file up-to-date.
# Description of Changes
Adds the code for the SaaS frontend as proprietary code to the OSS repo.
This version of the code is adapted from 22/1/2026, which was the last
SaaS version based on the 'V2' design. This will move us closer to being
able to have the OSS products understand whether the user has a SaaS
account, and provide the correct UI in those cases.
* Adds a fallback mechanism so the desktop app routes tool operations to
the local bundled backend when the user's self-hosted Stirling-PDF
server goes offline, and disables tools in the UI that aren't supported
locally.
* `selfHostedServerMonitor.ts` independently polls the self-hosted
server every 15s and exposes which tool endpoints are unavailable when
it goes offline
* `operationRouter.ts` intercepts operations destined for the
self-hosted server and reroutes them to the local bundled backend when
the monitor reports it offline
* `useSelfHostedToolAvailability.ts` feeds the offline tool set into
useToolManagement, disabling affected tools in the UI with a
selfHostedOffline reason and banner warning
- `SelfHostedOfflineBanner `is a dismissable (session-only) gray bar
shown at the top of the UI when in self-hosted mode and the server goes
offline. It shows:
PostHog is now initialized with persistence: 'memory' so no cookies are
written on first load. Consent is handled in a PostHogConsentSync
component that switches to localStorage+cookie persistence only when the
user accepts, using the official @posthog/react package (cherry-picked
from 14aaf64)
---------
Co-authored-by: James Brunton <james@stirlingpdf.com>
# Description of Changes
This pull request makes significant improvements to the Docker build
process for the embedded Stirling-PDF image, focusing on build
efficiency, runtime optimization, and maintainability. Key changes
include upgrading major tool versions, introducing optional stripping of
Calibre's WebEngine to reduce image size, consolidating ImageMagick
layers, and refining the Python environment build process. The runtime
image is now leaner, with clearer separation between build and runtime
dependencies, and improved caching for faster builds and pulls.
**Build and Dependency Management Improvements**
* Upgraded Calibre to version `9.4.0` and added support for the
`TARGETPLATFORM` build argument for multi-platform builds.
* Added an optional `CALIBRE_STRIP_WEBENGINE` build argument to strip
Chromium/WebEngine from Calibre, saving ~80 MB when PDF output via
Calibre is not needed.
* Consolidated ImageMagick outputs into a single staging directory
(`/magick-export`) to reduce Docker layers and improve caching
efficiency.
* Refactored Python virtual environment build: now built in a dedicated
stage with pre-built wheels and copied into the runtime image,
eliminating the need for build tools and pip installs at runtime.
**Runtime Image Optimization**
* Reduced installed system packages to only what is needed at runtime;
Python build tools and dev packages are no longer included.
* Cleaned up unnecessary runtime files, including removal of build-only
Python artifacts and system headers, for a smaller and more secure
image.
**Layer and Copy Optimization**
* Switched to `COPY --link` for all major external tool layers and
application files, enabling independent layer caching and parallel pulls
for faster builds.
**Runtime Configuration and Health**
* Improved runtime directory structure and permissions, added persistent
cache directories for Project Leyden AOT, and wrote the version tag to
`/etc/stirling_version` for easier script access.
* Updated the healthcheck to wait longer for startup and increased
timeout/retries for more robust readiness detection.
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
Fix#5779. Cookie consent persistance doesn't work on desktop (on Mac at
least, not sure about Windows) because of permission differences with
Tauri. We are allowed to store things in local storage fine, so this
switches the cookie consent module to store in local storage for
desktop, and leaves it alone for web, where it already worked correctly.
# Description of Changes
Race condition: The browser was opened before the deep-link listener was
registered. On slow first launches the OAuth
callback could arrive before the listener was ready. Fixed by
registering the listener first, then opening the browser
inside .then() once the listener is confirmed active.
Double-handling: Both SetupWizard and
authService.waitForDeepLinkCompletion processed the same
sso/sso-selfhosted deep
links, calling completeSelfHostedSession and onComplete() independently.
Fixed by moving all SSO completion into
authService and having SetupWizard defer to it.
Hardening: Removing SetupWizard's handler entirely left no fallback if
the webview reloads while the auth listener's
Promise is in flight. A selfHostedDeepLinkFlowActive flag tracks whether
authService has an active listener.
SetupWizard now acts as a fallback only when the flag is false (i.e.
after a JS context reset), preventing duplicate
handling in the normal path while preserving resilience on reload.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
- Reduced lightweight editor JSON size:
- Omit heavy page resources and contentStreams in lazy/lightweight
flows.
- Omit form fields in lazy metadata/editor bootstrapping flows.
- Strip inline font program blobs from lazy initial payloads.
- Added page-based font loading:
- New endpoint to fetch fonts for a specific cached page:
GET /api/v1/convert/pdf/text-editor/fonts/{jobId}/{pageNumber}
- Frontend now loads page fonts alongside page data and merges into
local doc state.
- Reduced save payload duplication:
- Partial export now sends only changed pages (no repeated full-document
font/metadata payload each save).
- Preserved round-trip/export safety:
- Missing lightweight fields (resources/contentStreams) are interpreted
as “preserve existing from cached PDF.”
- Annotation semantics fixed so explicit empty annotation lists can
clear annotations.
- Fixed a regression where lazy mode could fall back to full export and
lose overlays; lazy now stays on cached
partial export path when dirty pages exist.
- Logging/noise reduction
- Transport optimization:
- Enabled HTTP compression for JSON/problem responses. (might remove
later tho in testing)
### Outcome
- Much smaller JSON payloads for giant PDFs.
- Fewer duplicated bytes over the wire.
- Page-scoped loading of heavy font data.
- Better reliability for preserving overlays/vector/background content
during export.
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Extracts file-based navigation logic from HomePage into pure function
with comprehensive test coverage.
New behavior:
- Opening 1 file from empty → switch to viewer (activeFileIndex: 0)
- Opening 2+ files from empty → switch to fileEditor
- pdfTextEditor tool → no auto-navigation (handles own empty state)
- Non-startup transitions (N→M files) → no navigation
Benefits:
- Pure function → easy to test and reason about
- Clear separation of concerns
- Preserves all existing behavior including pdfTextEditor special case
- Adds new multi-file startup behavior
Changes:
- HomePage.tsx: use getStartupNavigationAction() utility
- homePageNavigation.ts: pure navigation logic
- homePageNavigation.test.ts: comprehensive unit tests
Note: prevFileCountRef initialization kept as useRef(activeFiles.length)
to correctly handle files restored from IndexedDB on app startup.
# Description of Changes
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
Upgrades embedPDF from v2.5.0 to v2.6.0 and migrates from unmaintained
pdf-lib to @cantoo/pdf-lib fork. Adds defensive error handling for
malformed PDFs and improves bridge lifecycle management.
### Changes
**Dependencies**
- Upgrade all @embedpdf/* packages from ^2.5.0 to ^2.6.0
- Replace pdf-lib with @cantoo/pdf-lib (maintained fork with better
TypeScript support)
**PDF Viewer Infrastructure (attachment/bookmark fix)**
- Add useDocumentReady hook to track document lifecycle across bridges
- Implement defensive bridge cleanup to prevent stale registrations
- Fix race condition in document ready state detection by subscribing to
events before checking state
**Link Extraction (updated to cantoo/pdf-lib)**
- Add graceful error handling for PDFs with invalid catalog structures
- Extract enhanced link metadata (tooltips, colors, border styles,
highlight modes)
- Return empty results instead of throwing on malformed PDFs
- Add validation for link creation (destination page bounds, rect
dimensions, color values)
**Signature Flattening (updated to cantoo/pdf-lib)**
- Improve SVG embedding with three-tier fallback strategy (native
vector, rasterized PNG, placeholder)
- Add proper Unicode handling for PDF form tooltips via
PDFString.decodeText()
- Extract SVG utilities into cleaner strategy pattern
**Form Field Processing (updated to cantoo/pdf-lib)**
- Add support for display labels vs export values in dropdown/list
fields per PDF spec 12.7.4.4
- Implement caching for expensive field property lookups
- Add proper handling of malformed /Opt arrays
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Summary
- Adds desktop file tracking: local paths are preserved and save buttons
now work as expcted (doing Save/Save As as appropriate)
- Adds logic to track whether files are 'dirty' (they've been modified
by some tool, and not saved to disk yet).
- Improves file state UX (dirty vs saved) and close warnings
- Web behaviour should be unaffected by these changes
## Indicators
Files now have indicators in desktop mode to tell you their state.
### File up-to-date with disk
<img width="318" height="393" alt="image"
src="https://github.com/user-attachments/assets/06325f9a-afd7-4c2f-8a5b-6d11e3093115"
/>
### File modified by a tool but not saved to disk yet
<img width="357" height="385" alt="image"
src="https://github.com/user-attachments/assets/1a7716d9-c6f7-4d13-be0d-c1de6493954b"
/>
### File not tracked on disk
<img width="312" height="379" alt="image"
src="https://github.com/user-attachments/assets/9cffe300-bd9a-4e19-97c7-9b98bebefacc"
/>
# Limitations
- It's a bit weird that we still have files stored in indexeddb in the
app, which are still loadable. We might want to change this behaviour in
the future
- Viewer's Save doesn't persist to disk. I've left that out here because
it'd need a lot of testing to make sure the logic's right with making
sure you can leave the Viewer with applying the changes to the PDF
_without_ saving to disk
- There's no current way to do Save As on a file that has already been
persisted to disk - it's only ever Save. Similarly, there's no way to
duplicate a file.
---------
Co-authored-by: James Brunton <jbrunton96@gmail.com>
Co-authored-by: James Brunton <james@stirlingpdf.com>
# Description of Changes
Change the SAML support for SSO to understand when a request is coming
from the desktop app, and use the alternate auth flow that the desktop
app requires.
## Description
Fixes#5542
This PR adds support for environment variables to configure the file
upload limit, which was previously ignored.
## Changes
- **Added support for `SYSTEMFILEUPLOADLIMIT` environment variable**:
Accepts format like "100MB", "1GB", etc.
- **Added support for `SYSTEM_MAXFILESIZE` environment variable**:
Accepts number in MB (e.g., "100" for 100MB)
- **Initialize `fileUploadLimit` from environment variables**: Added
`@PostConstruct` method in `ApplicationProperties` to read env vars and
set `fileUploadLimit` if not already set in settings.yml
- **Created `MultipartConfiguration`**: New configuration class that
syncs Spring multipart settings with `fileUploadLimit` from settings.yml
or environment variables
- **Updated `application.properties`**: Added documentation about
environment variable support
## How it works
1. On startup,
`ApplicationProperties.initializeFileUploadLimitFromEnv()` checks for
`SYSTEMFILEUPLOADLIMIT` or `SYSTEM_MAXFILESIZE` environment variables
2. If found and `fileUploadLimit` is not set in settings.yml, it sets
the value
3. `MultipartConfiguration` reads the `fileUploadLimit` via
`UploadLimitService` and configures Spring multipart settings
accordingly
4. Users can also still use `SPRING_SERVLET_MULTIPART_MAX_FILE_SIZE` and
`SPRING_SERVLET_MULTIPART_MAX_REQUEST_SIZE` directly
## Testing
Set environment variables:
- `SYSTEMFILEUPLOADLIMIT=10MB` or
- `SYSTEM_MAXFILESIZE=10`
The `fileUploadLimit` in settings.yml should be populated and multipart
limits should be respected.
# Description of Changes
This pull request updates several GitHub Actions and related
dependencies across multiple workflow files to newer versions. The main
goal is to keep the CI/CD pipeline up-to-date with the latest security
patches, features, and bug fixes provided by upstream maintainers. The
changes primarily involve upgrading the versions of commonly used
actions like `actions/checkout`, `docker/login-action`,
`actions/setup-java`, `gradle/actions/setup-gradle`, and
`actions/upload-artifact`.
The most important changes are:
**Actions Version Upgrades (General Maintenance & Security):**
* Upgraded `actions/checkout` from v6.0.1 to v6.0.2 in all workflow
files to ensure the latest bug fixes and improvements are used.
[[1]](diffhunk://#diff-931fcb06ba030420d7044dde06465ad55b4e769a9bd374dcd6a0c76f79a5e30eL119-R119)
[[2]](diffhunk://#diff-931fcb06ba030420d7044dde06465ad55b4e769a9bd374dcd6a0c76f79a5e30eL175-R175)
[[3]](diffhunk://#diff-931fcb06ba030420d7044dde06465ad55b4e769a9bd374dcd6a0c76f79a5e30eL365-R365)
[[4]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L48-R48)
[[5]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L136-R136)
[[6]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L148-R160)
[[7]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L378-R378)
[[8]](diffhunk://#diff-26fc40a450703e6602af586a24594196fb10e132de14a9a488ae64ee8cc51166L29-R29)
[[9]](diffhunk://#diff-f1e8b4497f902b85c1b990cd7e6ebd928afd9051757fcb8f376be66260c9ea05L26-R26)
[[10]](diffhunk://#diff-cfe84f4bb9657c721ff741644ee0bce45aa81aaef9dea1ea8741c946984e9722L23-R23)
[[11]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L39-R39)
[[12]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L63-R72)
[[13]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L138-R147)
[[14]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L175-R177)
[[15]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L210-R219)
[[16]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L264-R273)
[[17]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L328-R328)
[[18]](diffhunk://#diff-3117b4a93711d37b0a9a1668272eec716fea0b4f57dde16a85e7ab3f569c455dL35-R35)
[[19]](diffhunk://#diff-7cdd3ccec44c8ba176bdc3b9ef54c3f56aa210a1a4e2bb5f79d87b1e50314a18L25-R25)
[[20]](diffhunk://#diff-f8b6ec3c0af9cd2d8dffef6f3def2be6357fe596a606850ca7f5d799e1349069L26-R26)
[[21]](diffhunk://#diff-3c0f521958c53ad27c967692b4d5480ead136acb33622ee97d39df814b1b202eL33-R33)
* Upgraded `docker/login-action` from v3.6.0 to v3.7.0 for improved
Docker Hub authentication.
[[1]](diffhunk://#diff-931fcb06ba030420d7044dde06465ad55b4e769a9bd374dcd6a0c76f79a5e30eL192-R192)
[[2]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L182-R182)
[[3]](diffhunk://#diff-f8b6ec3c0af9cd2d8dffef6f3def2be6357fe596a606850ca7f5d799e1349069L88-R88)
**Java and Gradle Tooling Updates:**
* Updated `actions/setup-java` from v5.0.0 to v5.2.0 and
`gradle/actions/setup-gradle` from v5.0.0 to v5.0.1 to get the latest
Java and Gradle setup improvements.
[[1]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L148-R160)
[[2]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L63-R72)
[[3]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L138-R147)
[[4]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L210-R219)
[[5]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L264-R273)
[[6]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L338-R344)
* Upgraded `actions/setup-node` from v5.0.0 to v6.1.0 for Node.js setup.
**Artifact Handling Improvements:**
* Upgraded `actions/upload-artifact` from v4.6.2 to v6.0.0 for uploading
build and test artifacts, which may include performance and reliability
improvements.
[[1]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L104-R104)
[[2]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L160-R160)
[[3]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L193-R193)
[[4]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L232-R232)
[[5]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L379-R379)
**Other Action Updates:**
* Updated `actions/ai-inference` from v2.0.4 to v2.0.5 in the AI PR
title review workflow.
These updates help ensure that the CI/CD workflows remain secure,
reliable, and compatible with the latest tools and platforms.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Auto-generated by stirlingbot[bot]
This PR updates the backend license report based on dependency changes.
Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
# Description of Changes
This pull request introduces several improvements to pre-commit
configuration and automation, enhances error handling in scripts, and
updates dependencies and exclusions for code quality tools. The main
changes are grouped below:
**Pre-commit and CI workflow improvements:**
* The pre-commit workflow in `.github/workflows/pre_commit.yml` now runs
specific hooks (`ruff`, `ruff-format`, `codespell`, `gitleaks`,
`end-of-file-fixer`, `trailing-whitespace`) individually instead of
running all hooks at once, providing more granular feedback.
* The sync files workflow in `.github/workflows/sync_files_v2.yml` now
installs pre-commit dependencies and runs the `toml-sort-fix` hook to
ensure TOML files are consistently sorted.
* Added the `toml-sort-fix` hook from the `toml-sort` repository to
`.pre-commit-config.yaml` for sorting TOML files in the locales
directory.
**Pre-commit configuration and dependency updates:**
* Updated the `ruff-pre-commit` repository version from `v0.14.8` to
`v0.14.14` in `.pre-commit-config.yaml`.
* Updated the `codespell` hook to expand the ignore words list and to
exclude the `frontend/public/vendor` directory.
**Script improvements and error handling:**
* Replaced bare `except:` clauses with `except Exception:` in
`scripts/convert_cff_to_ttf.py` for safer error handling.
[[1]](diffhunk://#diff-8c68a22370903bb52267848deaf7298604704c59292650d9dfc1d1975fa8bc53L194-R194)
[[2]](diffhunk://#diff-8c68a22370903bb52267848deaf7298604704c59292650d9dfc1d1975fa8bc53L318-R325)
* Minor code cleanup in translation validation scripts by removing
unused variables.
[[1]](diffhunk://#diff-2399f964d817f2e61b818c3f6543ebce9e230778b35ab62bc8578cb7cc9da99eL124)
[[2]](diffhunk://#diff-3b83f838d72dce860ff1f7b24a033f02134aaac3d7abdf061d72c1c21943f896L117)
* Removed unused `progress` variable assignment in
`scripts/counter_translation_v3.py` for clarity.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
### Description of Changes
This Pull Request was automatically generated to synchronize updates to
translation files and documentation. Below are the details of the
changes made:
#### **1. Synchronization of Translation Files**
- Updated translation files
(`frontend/public/locales/*/translation.toml`) to reflect changes in the
reference file `en-GB/translation.toml`.
- Ensured consistency and synchronization across all supported language
files.
- Highlighted any missing or incomplete translations.
- **Format**: TOML
#### **2. Update README.md**
- Generated the translation progress table in `README.md` using
`counter_translation_v3.py`.
- Added a summary of the current translation status for all supported
languages.
- Included up-to-date statistics on translation coverage.
#### **Why these changes are necessary**
- Keeps translation files aligned with the latest reference updates.
- Ensures the documentation reflects the current translation progress.
---
Auto-generated by [create-pull-request][1].
[1]: https://github.com/peter-evans/create-pull-request
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
Bumps alpine from 3.23.2 to 3.23.3.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps io.swagger.core.v3:swagger-core-jakarta from 2.2.41 to 2.2.42.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
## Description
Fixes#5578
This PR fixes a `ClassCastException` that occurs when calling
`/api/v1/general/extract-bookmarks`. The method was returning
`List<Map<String, Object>>` directly, but Spring MVC was wrapping it in
a `ResponseEntity`, causing a type mismatch.
## Changes
- Changed return type from `List<Map<String, Object>>` to
`ResponseEntity<List<Map<String, Object>>>`
- Wrapped return values with `ResponseEntity.ok(...)` to match Spring
MVC pattern
- Removed `@ResponseBody` annotation as it is not needed with
`ResponseEntity`
## Verification
This fix follows the same pattern used in other similar endpoints:
- `VerifyPDFController.verifyPDF()` returns
`ResponseEntity<List<PDFVerificationResult>>`
- `ValidateSignatureController.validateSignature()` returns
`ResponseEntity<List<SignatureValidationResult>>`
## Testing
The endpoint should now return a proper JSON response with the list of
bookmarks instead of throwing a 500 error.
---------
Co-authored-by: GitTensor Miner <miner@gittensor.io>
Co-authored-by: Anthony Stirling <77850077+Frooodle@users.noreply.github.com>
### Motivation
- Allow operators to configure a pipeline base directory and multiple
watched folders so the pipeline can monitor several directories and
subdirectories concurrently.
- Ensure scanning traverses subdirectories while skipping internal
processing folders (e.g. `processing`) and preserve existing behavior
for finished/output paths.
- Expose the new options in the server `settings.yml.template` and the
admin UI so paths can be edited from the web console.
### Description
- Added new `pipelineDir` and `watchedFoldersDirs` fields to
`ApplicationProperties.CustomPaths.Pipeline` and kept backward
compatibility with `watchedFoldersDir`
(app/common/src/main/java/stirling/software/common/model/ApplicationProperties.java).
- Resolved pipeline base and multiple watched folder paths in
`RuntimePathConfig` and exposed `getPipelineWatchedFoldersPaths()`
(app/common/src/main/java/stirling/software/common/configuration/RuntimePathConfig.java).
- Updated `FileMonitor` to accept and register multiple root paths
instead of a single root
(app/common/src/main/java/stirling/software/common/util/FileMonitor.java).
- Updated `PipelineDirectoryProcessor` to iterate all configured watched
roots and to walk subdirectories while ignoring `processing` dirs
(app/core/src/main/java/stirling/software/SPDF/controller/api/pipeline/PipelineDirectoryProcessor.java).
- Exposed the new settings in `settings.yml.template` and the admin UI,
including a multi-line `Textarea` to edit `watchedFoldersDirs`
(app/core/src/main/resources/settings.yml.template,
frontend/src/proprietary/components/shared/config/configSections/AdminGeneralSection.tsx).
- Adjusted unit test setup to account for list-based watched folders
(app/common/src/test/java/stirling/software/common/util/FileMonitorTest.java).
### Testing
- Ran formatting and build checks with `./gradlew spotlessApply` and
`./gradlew build` using Java 21 via
`JAVA_HOME=/root/.local/share/mise/installs/java/21.0.2
PATH=/root/.local/share/mise/installs/java/21.0.2/bin:$PATH ./gradlew
...`, but both runs failed due to Gradle plugin resolution being blocked
in this environment (plugin portal/network 403), so full
compilation/formatting could not complete.
- Confirmed the code compiles locally was not possible here; unit test
`FileMonitorTest` was updated to use the new API but was not executed
due to the blocked build.
- Changes were committed (`Support multiple pipeline watch directories`)
and the repository diff contains the listed file modifications.
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_69741ecd17c883288d8085a63ccd66f4)
# Description of Changes
This pull request updates the authentication token refresh response
structure to include both user and session information, and makes
corresponding adjustments in the backend, frontend, and tests to support
this change. Additionally, it adds improved logging to the frontend for
better debugging.
**Backend API response changes:**
* The `/api/v1/auth/refresh` endpoint now returns a response containing
both a `user` object and a nested `session` object with the new access
token and expiry, instead of returning the token fields at the top
level.
**Test updates:**
* The `refreshReturnsNewTokenWhenValid` test has been updated to expect
the new response structure, checking for `session.access_token` and
`session.expires_in` instead of the previous top-level fields.
**Frontend improvements:**
* Added a debug log message in `springAuthClient.ts` to indicate when
the token has been refreshed successfully, aiding in debugging and
monitoring.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
## What was changed
- Updated several Mantine `label` compositions in
`AdminSecuritySection.tsx` to avoid invalid HTML nesting that can
trigger React hydration errors (e.g., a `<div>` rendered inside a
`<p>`).
- Changed `Group` used inside `NumberInput` / `Select` labels to render
as an inline element via `component="span"`.
- Added `name` attributes to multiple form controls (`Switch`, `Select`,
`NumberInput`, `Textarea`) to satisfy browser/autofill recommendations
and improve form field identification.
## Why the change was made
- Fixes the runtime warning/error:
- `In HTML, <div> cannot be a descendant of <p>. This will cause a
hydration error.`
- Caused by block-level wrappers inside Mantine `Text`/`p` label
rendering.
- Addresses the browser audit warning:
- `A form field element should have an id or name attribute`
- Adding stable `name` attributes improves autofill behavior and form
accessibility tooling.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
This PR fixes false-positive TypeScript errors in our layered build
setup (core → proprietary → desktop) by ensuring each build’s typecheck
only evaluates files that are actually part of that build’s reachable
module graph. This prevents overridden core implementations from being
typechecked in higher-layer builds where they are effectively
unreachable due to alias-based overrides.
## Background
We maintain multiple build targets from a layered source tree:
- core: open source baseline
- proprietary: core + proprietary additions/overrides
- desktop: proprietary + desktop-specific additions/overrides
We implement overrides via paths/aliases such that placing a file in a
higher layer at the same relative path supersedes the lower-layer file
at runtime.
For safety, we run TypeScript typechecking independently per build
target to ensure all builds remain valid.
## Problem
Our existing tsconfig setup often typechecked files that are not
actually reachable in a given build. Specifically:
- When a file in core is overridden by a file in proprietary or desktop,
the overridden core file can still be included in the TypeScript Program
for the higher-layer build (typically due to broad include globs).
- This produces false-positive type errors in higher-layer typecheck
runs, even though those core files are effectively unreachable in the
build.
This created friction and noise, and meant we had to make unnecessary
changes to `core` to make the other builds happy, reducing type safety
in the process.
## Solution
This PR adjusts the tsconfig strategy so each build target's typecheck
is driven by reachable entrypoints rather than blanket inclusion of all
layer source trees. Concretely:
- Each build’s tsconfig now includes only:
- that build’s entrypoints and layer sources that are intended to be
compiled for the target
- any shared/top-level sources required by the target
- Lower layers (e.g., core) are not globally included in higher-layer
builds; they are instead pulled in through module resolution only when
actually referenced (with paths ordering ensuring the correct override
wins).
- This means that we still check all the files that will actually be run
with whatever the overridden logic is, but avoid wasting time and
introducing false-positives by not checking files which have been
overridden.
## Notes
Unfortunately, the config we use for the type checking can't be the same
as the one we use for Vite in this strategy. Vite needs to know about
the entire source tree, so it can't only include the subfolders because
it causes build errors. Because of this, I've duplicated the existing
(valid) tsconfig files and use them for Vite. This is a little clunky
but it does the job. Some day hopefully I'll come back to it and be able
to figure out a nicer way to do it, but for now at least, this solves
the type checking issues without impacting the runtime builds.
Also, I noticed that `@desktop` is defined as an alias, which was
presumably missed when I was removing the self-aliases from the files. I
don't see why you'd ever need to have a desktop file reference
`@desktop` to say "import this but make it impossible for something else
to override the import". I've removed the `@desktop` alias in this PR
while I was in there.
# Description of Changes
This pull request improves the PDF stamping feature, particularly the
text stamping functionality, by introducing dynamic variables, improving
formatting flexibility, and refining positioning logic. The changes
include backend support for dynamic stamp variables (such as date, time,
filename, and metadata), improvements to text layout and positioning,
updates to the API and frontend for usability, and localization
enhancements for user guidance.
**Dynamic Stamp Variables and Text Processing:**
* Added support for dynamic variables in stamp text (e.g., `@date`,
`@time`, `@page_number`, `@filename`, `@uuid`, and metadata fields),
including custom date formats and escaping for literal `@` symbols. This
is handled by the new `processStampText` method in
`StampController.java`.
* Implemented validation and formatting for custom date variables,
ensuring only safe formats are accepted and providing user-friendly
error messages for invalid formats.
**Text Layout and Positioning Improvements:**
* Refactored text and image stamp positioning: now calculates line
heights, block heights, and widths for multi-line stamps, and adjusts
placement logic for more accurate alignment (top, center, bottom) and
margins.
* Updated the default font size for stamps to 40pt and improved font
size handling in both backend and frontend, including validation for
positive values
**API and Method Signature Updates:**
* Extended method signatures to include additional context (such as page
index and filename) for more powerful variable substitution in stamps
**Frontend and Localization Enhancements:**
* Added comprehensive help text, variable descriptions, and template
examples to the UI, making it easier for users to understand and use
dynamic stamp variables.
* Improved accessibility and clarity in the stamp formatting UI by
disabling controls appropriately and providing clearer descriptions.
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Co-authored-by: ConnorYoh <40631091+ConnorYoh@users.noreply.github.com>
Co-authored-by: Anthony Stirling <77850077+Frooodle@users.noreply.github.com>
Fixed issue where @lob annotation on audit column was casing
`org.postgresql.util.PSQLException: Large Objects may not be used in
auto-commit mode.` data retrieval issues with Postgres
### Description of Changes
This Pull Request was automatically generated to synchronize updates to
translation files and documentation. Below are the details of the
changes made:
#### **1. Synchronization of Translation Files**
- Updated translation files
(`frontend/public/locales/*/translation.toml`) to reflect changes in the
reference file `en-GB/translation.toml`.
- Ensured consistency and synchronization across all supported language
files.
- Highlighted any missing or incomplete translations.
- **Format**: TOML
#### **2. Update README.md**
- Generated the translation progress table in `README.md` using
`counter_translation_v3.py`.
- Added a summary of the current translation status for all supported
languages.
- Included up-to-date statistics on translation coverage.
#### **Why these changes are necessary**
- Keeps translation files aligned with the latest reference updates.
- Ensures the documentation reflects the current translation progress.
---
Auto-generated by [create-pull-request][1].
[1]: https://github.com/peter-evans/create-pull-request
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
# Description of Changes
This pull request primarily updates dependencies for both the frontend
JavaScript and Rust (Tauri) codebases, and refactors the
`MobileUploadModal` component to consistently use a centralized API
client for backend communication. The refactor improves code
consistency, error handling, and logging in the file upload workflow.
**Dependency updates**
* Updated several Tauri-related dependencies in both
`frontend/package.json` and `frontend/src-tauri/Cargo.toml` to their
latest versions, including `@tauri-apps/api`, `@tauri-apps/plugin-fs`,
`@tauri-apps/plugin-http`, `@tauri-apps/plugin-shell`, and associated
Rust crates. This ensures better compatibility, security, and access to
new features.
[[1]](diffhunk://#diff-da6498268e99511d9ba0df3c13e439d10556a812881c9d03955b2ef7c6c1c655L46-R49)
[[2]](diffhunk://#diff-da6498268e99511d9ba0df3c13e439d10556a812881c9d03955b2ef7c6c1c655L129-R132)
[[3]](diffhunk://#diff-91e702206f8c6459b43ae72dbd6abfed8104de661dd239d13956985210f67fd0L21-R35)
* Updated `@iconify-json/material-symbols` and `@tauri-apps/cli` in
`package.json` for improved icon support and build tooling.
**Refactor: API client usage in `MobileUploadModal`**
* Replaced all direct `fetch` calls in `MobileUploadModal.tsx` with the
centralized `apiClient`, standardizing backend requests and improving
maintainability.
[[1]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aR13)
[[2]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL84-R98)
[[3]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL116-R122)
[[4]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL130-R138)
[[5]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL160-R177)
[[6]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL187-R207)
* Improved error handling, status checks, and logging throughout the
upload and session management flow, making debugging easier and the user
experience more robust.
[[1]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL84-R98)
[[2]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL130-R138)
[[3]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL148-R153)
[[4]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL160-R177)
[[5]](diffhunk://#diff-fafb4b340343062aba7b763dea5e6e13e0e330ab2ac7dfd04a2032ba79620c8aL187-R207)
**Session cleanup improvements**
* Ensured that mobile scanner sessions are reliably cleaned up both when
the modal closes and when the component unmounts, using the `apiClient`
and React's effect cleanup mechanism.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
# Description of Changes
This PR replaces the legacy, fragile PDF/A validation logic (which
relied on manual regex parsing and PDFBox Preflight) with the robust
**VeraPDF** integration. Additionally, it introduces a new check for
**SEC/EDGAR compliance** and refactors the frontend report view to
display detailed verification results.
### Key Changes
**Backend (`GetInfoOnPDF.java`):**
* **VeraPDF Integration:** Replaced the custom `checkForStandard` and
`validatePdfAWithPreflight` methods with `VeraPDFService.validatePDF()`.
This aligns validation with industry standards.
* **Code Cleanup:** Removed approximately ~200 lines of technical debt,
including raw XML regex parsing and file-locking prone `PreflightParser`
logic.
* **SEC Compliance:** Added `isSECCompliant()` logic to validate
documents against typical EDGAR requirements:
* No Encryption.
* No Active Content (JavaScript).
* No External Links.
* No Embedded Files.
* No AcroForms.
**Frontend (`GetPdfInfo`):**
* **New Component:** Created `ComplianceSection.tsx` to handle the
complexity of compliance reporting.
* **Enhanced UI:**
* Added visual badges (Passed/Failed/Not Detected) using
`CheckIcon`/`CloseIcon`.
* Added support for displaying the detailed VeraPDF summary alongside
legacy boolean flags.
* Improved handling of "Not PDF/A" states.
### Motivation
The previous validation logic was prone to false positives/negatives and
memory issues with large files (due to Preflight). Moving to VeraPDF
provides accurate, profile-based validation (e.g., PDF/A-1b, 2b, etc.).
The SEC check satisfies a growing need for users validating documents
for financial filings.
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Signed-off-by: brios <brios@heim-041-30.jkh.uni-linz.ac.at>
# Description of Changes
This pull request introduces several improvements and new features
across the authentication and admin data APIs, with a particular focus
on multi-factor authentication (MFA) support and better handling of user
settings. The changes include integrating MFA status into account data
responses, masking sensitive user settings in admin views, and
refactoring code to use more robust user creation methods. Additionally,
there are minor code cleanups and consistency improvements.
### Multi-factor Authentication (MFA) Integration
* Added `mfaEnabled` and `mfaRequired` fields to the `AccountData`
response, populated using the new `MfaService`, to provide clients with
MFA status information for users.
[[1]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1R430-R431)
[[2]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1R72)
[[3]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1L83-R86)
[[4]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1R98)
[[5]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1R574-R575)
### User Settings Handling and Security
* Admin settings API now returns user settings for each user, with the
`mfaSecret` field masked to protect sensitive information. This is
achieved by fetching settings via `findByIdWithSettings` and
copying/masking the relevant field before returning.
[[1]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1R252-R259)
[[2]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1L302-R322)
[[3]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1R378)
[[4]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1R563)
### Refactoring and Code Consistency
* Refactored user creation in `InitialSecuritySetup` to use the
`SaveUserRequest` builder and `saveUserCore` for better maintainability
and clarity, replacing direct calls to `saveUser`.
[[1]](diffhunk://#diff-0c7960a6283a07c4905ac9785b2820b412574c9f86918ada30caba0356d34850R22)
[[2]](diffhunk://#diff-0c7960a6283a07c4905ac9785b2820b412574c9f86918ada30caba0356d34850L116-R124)
[[3]](diffhunk://#diff-0c7960a6283a07c4905ac9785b2820b412574c9f86918ada30caba0356d34850L130-R144)
[[4]](diffhunk://#diff-0c7960a6283a07c4905ac9785b2820b412574c9f86918ada30caba0356d34850L140-R160)
* Standardized checks for internal team membership by comparing with
`TeamService.INTERNAL_TEAM_NAME` on the left side for consistency.
[[1]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1L267-R273)
[[2]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1L332-R351)
[[3]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1L421-R443)
[[4]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1L449-R471)
[[5]](diffhunk://#diff-2ead183708656f2c6894b28457623820c83b1ed4b0814533caa0e8f0dd6fbcd1L462-R485)
### API and DTO Changes
* Changed the login API to accept `UsernameAndPassMfa` instead of
`UsernameAndPass`, paving the way for MFA code support in authentication
requests.
[[1]](diffhunk://#diff-9ca4f9246abe79368552264e2e18d7ed039e084c70c0794eb02cfd1b75fbd8a8L30-R41)
[[2]](diffhunk://#diff-9ca4f9246abe79368552264e2e18d7ed039e084c70c0794eb02cfd1b75fbd8a8L61-R71)
* Updated import statements and controller dependencies to include new
DTOs and services related to MFA.
[[1]](diffhunk://#diff-9ca4f9246abe79368552264e2e18d7ed039e084c70c0794eb02cfd1b75fbd8a8L14-R19)
[[2]](diffhunk://#diff-9ca4f9246abe79368552264e2e18d7ed039e084c70c0794eb02cfd1b75fbd8a8R56-R57)
These updates improve security, prepare the system for MFA rollout, and
make admin and authentication APIs more robust and informative.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
- show demo data for audit and usage sections when enterprise licensing
is unavailable
- add enterprise-required banner messaging and reuse demo content
instead of erroring
- update translations for the new enterprise notice
## Testing
- Not run (not requested)
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_693af73ad9248328885eb8bb81ccf51a)
# Description of Changes
This pull request adds support for converting PDF files to PDF/X format
in the frontend, alongside the existing PDF/A conversion. The changes
include UI updates, translation strings, configuration, and processing
logic to enable PDF to PDF/X conversion using the same backend endpoint
as PDF/A, with appropriate user options and warnings.
**PDF/X Conversion Support:**
- Added a new `ConvertToPdfxSettings` component for configuring PDF/X
conversion options, including output format selection and digital
signature warnings.
(`frontend/src/core/components/tools/convert/ConvertToPdfxSettings.tsx`)
- Updated the conversion settings UI to display PDF/X options when
converting from PDF to PDF/X.
(`frontend/src/core/components/tools/convert/ConvertSettings.tsx`)
**Configuration and Processing Logic:**
- Extended conversion constants and parameters to recognize PDF/X as a
target format, map it to the PDF/A backend endpoint, and ensure correct
file naming and processing behavior.
(`frontend/src/core/constants/convertConstants.ts`,
`frontend/src/core/hooks/tools/convert/useConvertOperation.ts`,
`frontend/src/core/hooks/tools/convert/useConvertParameters.ts`)
- Ensured that PDF/X conversions are processed separately per file,
similar to PDF/A.
(`frontend/src/core/hooks/tools/convert/useConvertOperation.ts`)
**UI and Translation Updates:**
- Updated translation strings to include PDF/X options, descriptions,
and warnings. (`frontend/public/locales/en-GB/translation.toml`)
<img width="366" height="998" alt="image"
src="https://github.com/user-attachments/assets/b28fa095-9350-4db2-a0b5-bddcf003fa46"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Co-authored-by: Anthony Stirling <77850077+Frooodle@users.noreply.github.com>
Auto-generated by stirlingbot[bot]
This PR updates the backend license report based on dependency changes.
Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
Bumps debian from `f668110` to `ed542b2`.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
[//]: # (dependabot-start)
⚠️ **Dependabot is rebasing this PR** ⚠️
Rebasing might not happen immediately, so don't worry if this takes some
time.
Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.
---
[//]: # (dependabot-end)
Bumps node from `f4769ca` to `e80397b`.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps nginx from `c083c37` to `b0f7830`.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description of Changes
This pull request refactors and improves the logic for converting
human-readable size strings (like "10MB", "2.5GB") to bytes in the
`GeneralUtils` utility class. The main enhancement is switching from
imprecise floating-point arithmetic to `BigDecimal` for more accurate
and robust conversions, and centralizing the conversion logic to reduce
code duplication and improve maintainability.
**Improvements to size conversion logic:**
* Replaced all floating-point arithmetic in `convertSizeToBytes` with
`BigDecimal` operations to ensure precision and to handle large values
more safely.
* Introduced a new private method `toBytes(BigDecimal value, int
powerOf1024)` to centralize and standardize the conversion from size
units to bytes, including error handling for negative and excessively
large values.
* Added constants `KIB` and `LONG_MAX_DECIMAL` for improved readability
and maintainability of size calculations.
* Added a helper method `parseSizeValue(String value)` to consistently
parse size values as `BigDecimal`.
* Updated imports to include `BigDecimal` and `RoundingMode` for the new
conversion logic.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
This PR performs a broad cleanup and refactor across the security, SSO,
and dependency layers to improve correctness, maintainability, and
robustness.
### What was changed
- **SSO / Authentication cleanup**
- Removed deprecated and ambiguous `SSO` authentication handling in
favor of explicit `OAUTH2` and `SAML2`.
- Introduced a centralized helper (`isSsoAuthenticationTypeByUsername`)
to consistently detect SSO-backed users.
- Hardened user creation logic to strictly validate authentication types
and reject invalid values.
- Updated OAuth2 and SAML2 authentication success handlers to use
unified SSO detection logic and clearer control flow.
- Adjusted tests to reflect the new canonical authentication types.
- **Security & robustness improvements**
- Replaced direct `new URL(...)` usage with `URI.create(...).toURL()` to
avoid malformed URL edge cases.
- Hardened `Referer` parsing logic to safely handle invalid or host-less
URIs.
- Improved string comparison patterns (`"literal".equals(x)`) to avoid
potential `NullPointerException`s.
- **Controller and API cleanup**
- Removed large blocks of unused and legacy admin settings endpoints
from `SettingsController`.
- Updated OpenAPI annotations to use `requiredMode` instead of
deprecated `required`.
- **Dependency and build maintenance**
- Updated Spring Boot from `3.5.7` to `3.5.9`.
- Updated multiple dependencies (Spring Security, Jackson, Micrometer,
Jetty, Hibernate, SnakeYAML, Springdoc, Swagger UI, etc.).
- Synced dependency versions in `3rdPartyLicenses.json` and removed
duplicate or obsolete entries.
- Modernized Gradle DSL usage (`url =`, `username =`,
`allowInsecureProtocol = true`).
- Ensured Spotless disabling applies consistently across all
subprojects.
- Added `.build-cache` to `.gitignore`.
### Why the change was made
- To eliminate legacy and ambiguous SSO handling that could lead to
incorrect authentication decisions.
- To improve security and stability when dealing with user-controlled
URLs and headers.
- To reduce technical debt by removing unused controllers and deprecated
patterns.
- To keep dependencies up to date and aligned with the current Spring
Boot release.
- To improve overall code clarity, consistency, and long-term
maintainability.
---
This pull request contains dependency updates, minor code cleanups, and
some refactoring to improve maintainability and correctness. The most
significant change is the removal of all admin settings endpoints
(GET/POST) from the `SettingsController`, which impacts how application
settings can be managed via the API. Additionally, there are dependency
version bumps, minor improvements to static resource checks, and small
refactors in certificate download logic and Telegram bot service.
**Major API changes:**
* Removed all admin settings endpoints (general, security, connections,
privacy, advanced) from `SettingsController`, including both GET and
POST handlers for updating and retrieving settings. This eliminates the
ability to manage these settings via the API.
**Dependency updates:**
* Upgraded `snakeyaml-engine` from 2.10 to 3.0.1 and
`springdoc-openapi-starter-webmvc-ui` from 2.8.14 to 2.8.15 in
`build.gradle`.
**Refactoring and bug fixes:**
* Refactored static resource check in `RequestUriUtils.isStaticResource`
to use constant-first string comparison for better null safety and
clarity.
* Updated certificate download logic in `CertificateValidationService`
to use `URI.create(urlStr).toURL()` instead of `new URL(urlStr)` for
improved URL parsing and error handling.
[[1]](diffhunk://#diff-d2646f37bfd3e0963cbce16ab13edb52f2092795f54203b999dd82651154f26dL513-R514)
[[2]](diffhunk://#diff-d2646f37bfd3e0963cbce16ab13edb52f2092795f54203b999dd82651154f26dL703-R704)
* Refactored `TelegramPipelineBot` to consistently use
`telegramProperties.getBotToken()` instead of `getBotToken()`, and
removed the `getBotToken()` method override.
[[1]](diffhunk://#diff-a2466b92f58750ea37960cd1533e3194d9ecc3b4ef5ad7b64a017ee0e636ad93L85-R85)
[[2]](diffhunk://#diff-a2466b92f58750ea37960cd1533e3194d9ecc3b4ef5ad7b64a017ee0e636ad93L395-R395)
[[3]](diffhunk://#diff-a2466b92f58750ea37960cd1533e3194d9ecc3b4ef5ad7b64a017ee0e636ad93L519-L523)
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Bumps `logback` from 1.5.23 to 1.5.24.
Updates `ch.qos.logback:logback-core` from 1.5.23 to 1.5.24
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/qos-ch/logback/releases">ch.qos.logback:logback-core's
releases</a>.</em></p>
<blockquote>
<h2>Logback 1.5.24</h2>
<p><strong>2026-01-06 Release of logback version 1.5.24</strong></p>
<p>• Added ExpressionPropertyCondition a PropertyCondition that can
evaluate boolean expressions similar to Java. See <a
href="https://logback.qos.ch/manual/configuration.html#conditionalExp">the
relevant documentation</a> for further details.</p>
<p>• A bit-wise identical binary of this version can be reproduced by
building from source code at commit
62bc5fc245dd3a52f3dd45e232733f4cefb4806d associated with the tag
v_1.5.24. Release built using Java "21" 2023-10-17 LTS build
21.0.1.+12-LTS-29 under Linux Debian 11.6.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/qos-ch/logback/commit/62bc5fc245dd3a52f3dd45e232733f4cefb4806d"><code>62bc5fc</code></a>
prepare release 1.5.24</li>
<li><a
href="https://github.com/qos-ch/logback/commit/aac604d7e8ab4f91f240256755f3a09e53e909f3"><code>aac604d</code></a>
typo fix of local variable name</li>
<li><a
href="https://github.com/qos-ch/logback/commit/8a6df9e5c4e935d158b85811d33f72d10373d914"><code>8a6df9e</code></a>
ExpressionPropertyCondition constructor should be public</li>
<li><a
href="https://github.com/qos-ch/logback/commit/95e588c4e37b3e76ff2a5c13e60d7e0485d43fb2"><code>95e588c</code></a>
minor changes in ExpressionPropertyCondition</li>
<li><a
href="https://github.com/qos-ch/logback/commit/859f5a1f34cdec0f63a1830394df8238e780a9f4"><code>859f5a1</code></a>
added ExpressionPropertyCondition capable of parsing logical expressions
on p...</li>
<li><a
href="https://github.com/qos-ch/logback/commit/348075adfa7cdd8f7bba60225ec570efb7761d3c"><code>348075a</code></a>
start work on 1.5.24-SNAPSHOT</li>
<li>See full diff in <a
href="https://github.com/qos-ch/logback/compare/v_1.5.23...v_1.5.24">compare
view</a></li>
</ul>
</details>
<br />
Updates `ch.qos.logback:logback-classic` from 1.5.23 to 1.5.24
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/qos-ch/logback/releases">ch.qos.logback:logback-classic's
releases</a>.</em></p>
<blockquote>
<h2>Logback 1.5.24</h2>
<p><strong>2026-01-06 Release of logback version 1.5.24</strong></p>
<p>• Added ExpressionPropertyCondition a PropertyCondition that can
evaluate boolean expressions similar to Java. See <a
href="https://logback.qos.ch/manual/configuration.html#conditionalExp">the
relevant documentation</a> for further details.</p>
<p>• A bit-wise identical binary of this version can be reproduced by
building from source code at commit
62bc5fc245dd3a52f3dd45e232733f4cefb4806d associated with the tag
v_1.5.24. Release built using Java "21" 2023-10-17 LTS build
21.0.1.+12-LTS-29 under Linux Debian 11.6.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/qos-ch/logback/commit/62bc5fc245dd3a52f3dd45e232733f4cefb4806d"><code>62bc5fc</code></a>
prepare release 1.5.24</li>
<li><a
href="https://github.com/qos-ch/logback/commit/aac604d7e8ab4f91f240256755f3a09e53e909f3"><code>aac604d</code></a>
typo fix of local variable name</li>
<li><a
href="https://github.com/qos-ch/logback/commit/8a6df9e5c4e935d158b85811d33f72d10373d914"><code>8a6df9e</code></a>
ExpressionPropertyCondition constructor should be public</li>
<li><a
href="https://github.com/qos-ch/logback/commit/95e588c4e37b3e76ff2a5c13e60d7e0485d43fb2"><code>95e588c</code></a>
minor changes in ExpressionPropertyCondition</li>
<li><a
href="https://github.com/qos-ch/logback/commit/859f5a1f34cdec0f63a1830394df8238e780a9f4"><code>859f5a1</code></a>
added ExpressionPropertyCondition capable of parsing logical expressions
on p...</li>
<li><a
href="https://github.com/qos-ch/logback/commit/348075adfa7cdd8f7bba60225ec570efb7761d3c"><code>348075a</code></a>
start work on 1.5.24-SNAPSHOT</li>
<li>See full diff in <a
href="https://github.com/qos-ch/logback/compare/v_1.5.23...v_1.5.24">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Auto-generated by stirlingbot[bot]
This PR updates the backend license report based on dependency changes.
Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
# Description of Changes
This pull request updates the `.github/workflows/build.yml` file to
improve automation and consistency in the build process. The most
significant change is the addition of a new `sync-versions` job that
automatically checks for and synchronizes version differences across key
files, and posts a comment on the pull request if mismatches are
detected. Additionally, there are minor formatting updates for
consistency.
**Automation and version synchronization:**
* Added a new `sync-versions` job that runs after the build, checks for
version mismatches between `build.gradle` and several frontend files,
and posts or updates a comment on the pull request to notify
contributors if differences are found. This job uses a GitHub App bot
for authentication and ensures that versioning remains consistent across
the project.
**Formatting consistency:**
* Updated the YAML formatting for `node-version`, `cache`, and
`python-version` fields to use double quotes for consistency in the
`build.yml` workflow.
[[1]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L150-R151)
[[2]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L244-R338)
<img width="1127" height="401" alt="image"
src="https://github.com/user-attachments/assets/6930a72d-f72b-4909-97e2-51f0e0f61613"
/>
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
This PR introduces comprehensive database backup and restore management
for embedded H2 databases directly within the admin UI, along with a
corrected backend condition for H2 detection.
### What was changed
- Fixed `H2SQLCondition` logic so embedded H2 is correctly detected when
custom databases are disabled.
- Updated and expanded unit tests to reflect the corrected H2 enablement
behavior.
- Added a new **Backups & Restore** section to the Admin Database
settings UI.
- Implemented UI features to:
- Create H2 database backups
- List available backup files with metadata
- Download, import, and delete existing backups
- Upload and import `.sql` backup files with a confirmation code safety
step
- Added a new frontend service (`databaseManagementService`) to
encapsulate database management API calls.
- Extended English (en-GB) translations for all new database backup and
restore UI elements.
### Why the change was made
- Embedded H2 is the default database when no custom database is
configured, but this was not consistently reflected in backend
conditions.
- Administrators need a safe, UI-driven way to manage H2 backups without
manual filesystem access.
- The new UI improves operability, safety (confirmation code on import),
and transparency (version and status badges).
<img width="1920" height="1080" alt="image"
src="https://github.com/user-attachments/assets/15869b9c-fa86-4b31-ac9b-8e6424138b73"
/>
<img width="1920" height="1032" alt="image"
src="https://github.com/user-attachments/assets/8668dc07-0384-40f0-91e1-c6973c1ce535"
/>
Closes#5515
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Bumps [reportlab](https://www.reportlab.com/) from 4.4.5 to 4.4.9.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
last week's updates translated plus a number of corrections and solving
inconsistencies
---------
Co-authored-by: Ludy <Ludy87@users.noreply.github.com>
# Description of Changes
- **What was changed**
- Updated `PipelineProcessor#sendWebRequest(...)` to stop forcing
`Content-Type: multipart/form-data` and to stop manually writing the
multipart body via `FormHttpMessageConverter`.
- Switched to `RestTemplate#httpEntityCallback(...)` (`RequestCallback`)
so Spring’s configured message converters handle multipart serialization
(including boundary generation) correctly.
- Made `X-API-KEY` header conditional (only added when
non-null/non-empty).
- Added a unit test (`sendWebRequestDoesNotForceContentType`) to ensure
`Content-Type` is not explicitly set on the outgoing request headers and
that the request succeeds end-to-end using mocked `RestTemplate`
behavior.
- **Why the change was made**
- The server-side error `org.eclipse.jetty.http.BadMessageException:
400: bad multipart` with `EOFException: unexpected EOF` indicates the
multipart request can be malformed (commonly due to
boundary/content-type mismatches or prematurely terminated streams).
Manually setting the multipart content type and writing the body can
bypass Spring’s normal boundary handling and lead to invalid multipart
payloads. Letting `RestTemplate` handle it ensures correct formatting.
---
This pull request updates how multipart web requests are sent in the
pipeline processor to avoid forcing the `Content-Type` header for
multipart requests, allowing the message converter to set it
automatically. It also adds a new test to ensure this behavior. The main
changes are focused on improving multipart request handling and
increasing test coverage.
**Multipart request handling improvements:**
* Refactored `PipelineProcessor.runPipelineAgainstFiles` to avoid
explicitly setting the `Content-Type` header to `multipart/form-data`,
letting the message converter set the appropriate boundary and content
type instead. This helps prevent issues with incorrect boundaries and
improves compatibility with multipart requests.
* Updated imports in `PipelineProcessor.java` to remove unused
`FormHttpMessageConverter` and add `RequestCallback`.
**Testing enhancements:**
* Added a new test `sendWebRequestDoesNotForceContentType` in
`PipelineProcessorTest.java` to verify that the `Content-Type` header is
not set explicitly and is left for the message converter to handle. This
test uses mocking to simulate the request and response flow.
* Added necessary imports in `PipelineProcessorTest.java` to support new
test logic and mocking.
[[1]](diffhunk://#diff-1a45e7b37023bd3a9580ab24d7025bb359cb8891c486111d372c0557f817b3edR7-R8)
[[2]](diffhunk://#diff-1a45e7b37023bd3a9580ab24d7025bb359cb8891c486111d372c0557f817b3edR18-R27)
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
This pull request completes the removal of Thymeleaf template engine
support and documentation from the Stirling-PDF codebase and developer
guides, reflecting the project's full migration to a React-based
frontend. It removes all references to Thymeleaf in code, configuration,
and documentation, and updates guides to focus exclusively on the React
SPA architecture. This streamlines the codebase and clarifies the
development workflow for contributors.
**Codebase cleanup: Thymeleaf removal**
- Removed all commented-out Thymeleaf dependencies and related
configuration beans from `build.gradle` and `AppConfig.java`
(`app/common/build.gradle`,
`app/common/src/main/java/stirling/software/common/configuration/AppConfig.java`)
[[1]](diffhunk://#diff-2a1a21726f33b05d16451237c68d6df91a5f4a58419d839715f3f1538a9a14aeL32)
[[2]](diffhunk://#diff-70792df9a0ab5675ded888c9eb8e2815c780d7b39f4bda8cf2da51d1b336899aL67-L76).
- Fully commented out (as a precursor to future deletion) the
`FileFallbackTemplateResolver` and `InputStreamTemplateResource`
classes, which were only used for Thymeleaf template resolution
(`app/common/src/main/java/stirling/software/common/configuration/FileFallbackTemplateResolver.java`,
`app/common/src/main/java/stirling/software/common/model/InputStreamTemplateResource.java`)
[[1]](diffhunk://#diff-e2bc7614074316b972355cb7dda47b98f75b00eb6b2ca4f143a680ab2803dcd8L1-L49)
[[2]](diffhunk://#diff-ab10ee12d8de8fb77759e931170373d388bde04bad6d0e42a0ab674355ef7ef3L1-L40).
**Documentation updates: React-only focus**
- Removed all instructions and references to migrating or developing
with Thymeleaf templates in `DeveloperGuide.md` and `ADDING_TOOLS.md`,
including detailed Thymeleaf usage examples, migration steps, and
translation key usage in templates
[[1]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL5-R5)
[[2]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL41-L43)
[[3]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL103-L105)
[[4]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL157)
[[5]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL312)
[[6]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL404-R396)
[[7]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL451-L505)
[[8]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL530-R467)
[[9]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL585-L669)
[[10]](diffhunk://#diff-ccd22fcbec8148152c8c77b85fbfe2633a6707b5ad50c2ef88fa87e2c47ea88fL699-L709)
[[11]](diffhunk://#diff-e2f8148ea620602b7761e8ee24afeac1c577476630528e210fe0b22e950016ddL3-R3)
[[12]](diffhunk://#diff-e2f8148ea620602b7761e8ee24afeac1c577476630528e210fe0b22e950016ddL267-R267).
- Updated architecture descriptions in `CLAUDE.md` to reflect that the
frontend is now exclusively a React SPA and that Thymeleaf templates
have been fully replaced
[[1]](diffhunk://#diff-6ebdb617a8104a7756d0cf36578ab01103dc9f07e4dc6feb751296b9c402faf7L131-R132)
[[2]](diffhunk://#diff-6ebdb617a8104a7756d0cf36578ab01103dc9f07e4dc6feb751296b9c402faf7L143-L144).
**Labeler configuration update**
- Removed labeler rules for files related to the old Thymeleaf-based web
controllers and UI directories, as these are now obsolete
(`.github/labeler-config-srvaroa.yml`).
These changes ensure the codebase and documentation are consistent with
the new React-only frontend approach, reducing maintenance overhead and
potential confusion for contributors.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
### Motivation
- Prevent a React hook ordering issue by removing conditional
`useCallback` usage in endpoint name resolution within the base
parameters hook.
### Description
- Replace conditional creation of `getEndpointName` with a single
unconditional `useCallback` that reads `config.endpointName` and returns
either the static string or calls the function with `parameters`,
updating `frontend/src/core/hooks/tools/shared/useBaseParameters.ts`.
### Testing
- No automated tests were executed in this change; please run `./gradlew
build` (or confirm CI build) to verify the project compiles
successfully.
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_696ec2829624832898fb4a92192ed548)
# Description of Changes
This pull request focuses on improving the handling of tool parameters
in the frontend automation and tool operation system. The main changes
ensure that default parameter values are consistently applied, missing
or undefined values are handled gracefully, and custom tools like
Automate and Merge correctly track input file consumption. These updates
enhance reliability and reduce errors due to missing or improperly
formatted parameters.
**Parameter Handling and Defaults:**
* Tool configuration and automation forms now merge user-provided
parameters with tool-specific default parameters, guaranteeing all
required fields are present during initialization and execution
(`ToolConfigurationModal.tsx`, `useAutomationForm.ts`,
`automationExecutor.ts`).
* All tool operation hooks (e.g., Add Watermark, Merge, Sanitize, Split,
Compress, Change Permissions, OCR) have been updated to safely handle
missing or undefined parameter values by providing sensible defaults,
preventing runtime errors and backend issues
(`useAddWatermarkOperation.ts`, `useMergeOperation.ts`,
`useSanitizeOperation.ts`, `useSplitOperation.ts`,
`useCompressOperation.ts`, `useChangePermissionsOperation.ts`,
`useOCROperation.ts`).
**Tool Operation Configuration Enhancements:**
* The `BaseToolOperationConfig` interface now supports a
`consumesAllInputs` flag, allowing tools with complex input-output
relationships (like Automate and Merge) to mark all input files as
successfully processed when appropriate (`useToolOperation.ts`).
* The Automate tool operation is configured to use this new flag, and
the core hook logic is updated to respect it when determining success
(`useAutomateOperation.ts`, `useToolOperation.ts`).
**Registry and Configuration Consistency:**
* Default parameters are now explicitly included in tool operation
configs (e.g., Merge), ensuring consistency between registry definitions
and runtime behavior (`useMergeOperation.ts`).
**Dependency Updates:**
* React hooks and callbacks now correctly include dependencies related
to parameter defaults to avoid stale values in forms and modals
(`useAutomationForm.ts`).
These changes collectively improve the robustness and maintainability of
the automation and tool configuration system.
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [X] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Co-authored-by: Reece Browne <74901996+reecebrowne@users.noreply.github.com>
# Description of Changes
This pull request updates the CI/CD workflows and Gradle configuration
to improve build reproducibility, security, and external dependency
management. The main changes include standardizing Gradle setup across
workflows, securely injecting Maven credentials, and enabling Gradle
build caching. There are also minor improvements to dependency version
management and plugin repository configuration.
**CI/CD Workflow Improvements:**
- Standardized Gradle setup across all GitHub Actions workflows by
explicitly adding a `Setup Gradle` step using
`gradle/actions/setup-gradle@v5.0.0` and specifying Gradle version 8.14.
This replaces previous usages and ensures consistency.
[[1]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R71-R81)
[[2]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L157-R176)
[[3]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R134-R144)
[[4]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R206-R216)
[[5]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R260-R264)
[[6]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R331-R341)
[[7]](diffhunk://#diff-3c0f521958c53ad27c967692b4d5480ead136acb33622ee97d39df814b1b202eR339-R351)
[[8]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bL53-R54)
[[9]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bL121-R127)
[[10]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bR206-R217)
[[11]](diffhunk://#diff-6a2e9fb077e57351f4a7e10d03b114e256298babdf06e7e7ae666781a5cf36a1R60-R70)
[[12]](diffhunk://#diff-62dcbe64a950b4efb54d691e1e87451a8cd535400aa9ea1e40893de5b57cd73bL45-R46)
[[13]](diffhunk://#diff-76056236de05155107f6a660f1e3956059e37338011b8f0e72188afcb9b17b6fL46-R56)
[[14]](diffhunk://#diff-fd60dc2adec58c1005c4e4164e9c24362fd6082fd3ab0403e54d276d9835fa6eL42-R65)
[[15]](diffhunk://#diff-b34ab107dd4bc92075b2e89b6f16e4a2813e267ca7c2afebdb1931a0a3900d5aR102-R114)
[[16]](diffhunk://#diff-98b618771a57e1758961359ecacbac2cff7cfef29aa021c3bc294ae926c4ce5bL47-R51)
- Enabled Gradle build cache (`--build-cache`) for all build-related
commands in workflows, improving build performance and consistency. Also
removed unnecessary `clean` commands before builds to further optimize
workflow times.
[[1]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R71-R81)
[[2]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L157-R176)
[[3]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R134-R144)
[[4]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R206-R216)
[[5]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R331-R341)
[[6]](diffhunk://#diff-3c0f521958c53ad27c967692b4d5480ead136acb33622ee97d39df814b1b202eR339-R351)
[[7]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bL134-R144)
[[8]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bR206-R217)
[[9]](diffhunk://#diff-6a2e9fb077e57351f4a7e10d03b114e256298babdf06e7e7ae666781a5cf36a1R60-R70)
[[10]](diffhunk://#diff-76056236de05155107f6a660f1e3956059e37338011b8f0e72188afcb9b17b6fL46-R56)
[[11]](diffhunk://#diff-fd60dc2adec58c1005c4e4164e9c24362fd6082fd3ab0403e54d276d9835fa6eL42-R65)
[[12]](diffhunk://#diff-b34ab107dd4bc92075b2e89b6f16e4a2813e267ca7c2afebdb1931a0a3900d5aR102-R114)
[[13]](diffhunk://#diff-98b618771a57e1758961359ecacbac2cff7cfef29aa021c3bc294ae926c4ce5bL47-R51)
**Security and Dependency Management:**
- Injected Maven credentials (`MAVEN_USER`, `MAVEN_PASSWORD`,
`MAVEN_PUBLIC_URL`) as environment variables in all relevant workflow
steps, supporting secure access to private or custom Maven repositories.
[[1]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R71-R81)
[[2]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L157-R176)
[[3]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R134-R144)
[[4]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R206-R216)
[[5]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R290-R293)
[[6]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R331-R341)
[[7]](diffhunk://#diff-3c0f521958c53ad27c967692b4d5480ead136acb33622ee97d39df814b1b202eR339-R351)
[[8]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bR66-R69)
[[9]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bL134-R144)
[[10]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bR281-R283)
[[11]](diffhunk://#diff-62dcbe64a950b4efb54d691e1e87451a8cd535400aa9ea1e40893de5b57cd73bR57-R60)
[[12]](diffhunk://#diff-76056236de05155107f6a660f1e3956059e37338011b8f0e72188afcb9b17b6fR73-R76)
[[13]](diffhunk://#diff-fd60dc2adec58c1005c4e4164e9c24362fd6082fd3ab0403e54d276d9835fa6eL42-R65)
[[14]](diffhunk://#diff-b34ab107dd4bc92075b2e89b6f16e4a2813e267ca7c2afebdb1931a0a3900d5aR178-R180)
[[15]](diffhunk://#diff-98b618771a57e1758961359ecacbac2cff7cfef29aa021c3bc294ae926c4ce5bL47-R51)
- Added a `pluginManagement` block in `settings.gradle` to allow Gradle
plugins to be resolved from a custom Maven repository if specified by
environment variables, increasing flexibility for plugin sourcing.
**Build and Dependency Versioning:**
- Updated `app/proprietary/build.gradle` to use the
`bouncycastleVersion` variable for the Bouncy Castle dependency version,
improving maintainability and consistency of dependency versioning.
**Workflow Trigger Improvements:**
- Expanded the file path triggers in
`.github/workflows/sync_files_v2.yml` to include additional Gradle build
files, ensuring the workflow runs when any core build files are changed.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
### Description of Changes
This Pull Request was automatically generated to synchronize updates to
translation files and documentation. Below are the details of the
changes made:
#### **1. Synchronization of Translation Files**
- Updated translation files
(`frontend/public/locales/*/translation.toml`) to reflect changes in the
reference file `en-GB/translation.toml`.
- Ensured consistency and synchronization across all supported language
files.
- Highlighted any missing or incomplete translations.
- **Format**: TOML
#### **2. Update README.md**
- Generated the translation progress table in `README.md` using
`counter_translation_v3.py`.
- Added a summary of the current translation status for all supported
languages.
- Included up-to-date statistics on translation coverage.
#### **Why these changes are necessary**
- Keeps translation files aligned with the latest reference updates.
- Ensures the documentation reflects the current translation progress.
---
Auto-generated by [create-pull-request][1].
[1]: https://github.com/peter-evans/create-pull-request
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
# Description of Changes
This pull request introduces a new SVG to PDF conversion feature,
including both backend and frontend changes. The backend adds a secure,
vector-preserving SVG-to-PDF conversion endpoint with comprehensive SVG
sanitization to prevent XSS and SSRF attacks. The frontend is updated to
route SVG-to-PDF conversions through this new endpoint and to
distinguish SVG from other image formats. Additionally, a new dependency
is added for PDF rendering.
**Backend: SVG to PDF Conversion and Security**
* Adds a new API endpoint and controller (`ConvertSvgToPDF`) for
converting SVG files to PDF, using Batik and PDFBox with vector graphics
preservation and robust error handling.
* Implements SVG sanitization (`SvgSanitizer`) to remove scripts, event
handlers, and dangerous URLs, protecting against XSS and SSRF attacks.
* Introduces a utility (`SvgToPdf`) for rendering SVG to PDF with
timeout protection against resource exhaustion attacks.
* Defines a new request model (`SvgToPdfRequest`) for SVG to PDF
conversion requests.
* Adds the `pdfbox-graphics2d` dependency for vector graphics PDF
rendering.
**Frontend: Routing and Format Handling**
* Updates conversion endpoint constants to add `svg-pdf` and maps SVG
files to use the new `svg-to-pdf` route instead of the generic
image-to-PDF route.
* Removes SVG from the generic image format list and introduces a
dedicated check for SVG format (`isSvgFormat`).
<img width="1133" height="995" alt="image"
src="https://github.com/user-attachments/assets/dec8cf27-ccb9-490d-af76-bff69feb0423"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [X] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
## Description
Fixed broken documentation link in the air-gapped setup guide that was
pointing to a non-existent `/Pro/#activation` page (returning 404).
Updated to the correct `/Paid-Offerings/#activating-your-license` URL
which returns 200 OK.
## Changes Made
- Updated link in `frontend/src/core/data/useTranslatedToolRegistry.tsx`
(line 838)
- Changed from `https://docs.stirlingpdf.com/Pro/#activation` to
`https://docs.stirlingpdf.com/Paid-Offerings/#activating-your-license`
## Testing
- Verified old link returns 404
- Verified new link returns 200 and has activation section
- Link now correctly points to the "Activating Your License" section of
the Paid Offerings documentation
## Related Issue
Resolves#5088
## Checklist
- [x] Code follows project style guidelines
- [x] Changes are limited to fixing the broken link only (atomic commit)
- [x] Link has been manually tested and verified working
### Description of Changes
This Pull Request was automatically generated to synchronize updates to
translation files and documentation. Below are the details of the
changes made:
#### **1. Synchronization of Translation Files**
- Updated translation files
(`frontend/public/locales/*/translation.toml`) to reflect changes in the
reference file `en-GB/translation.toml`.
- Ensured consistency and synchronization across all supported language
files.
- Highlighted any missing or incomplete translations.
- **Format**: TOML
#### **2. Update README.md**
- Generated the translation progress table in `README.md` using
`counter_translation_v3.py`.
- Added a summary of the current translation status for all supported
languages.
- Included up-to-date statistics on translation coverage.
#### **Why these changes are necessary**
- Keeps translation files aligned with the latest reference updates.
- Ensures the documentation reflects the current translation progress.
---
Auto-generated by [create-pull-request][1].
[1]: https://github.com/peter-evans/create-pull-request
---------
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
Auto-generated by stirlingbot[bot]
This PR updates the backend license report based on dependency changes.
Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: Ludy <Ludy87@users.noreply.github.com>
Bumps debian from `1c25564` to `449673e`.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps alpine from 3.22.1 to 3.23.2.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps alpine from 3.22.2 to 3.23.2.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps the pip group with 1 update in the /testing/cucumber directory:
[urllib3](https://github.com/urllib3/urllib3).
Updates `urllib3` from 2.5.0 to 2.6.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/urllib3/urllib3/releases">urllib3's
releases</a>.</em></p>
<blockquote>
<h2>2.6.3</h2>
<h2>🚀 urllib3 is fundraising for HTTP/2 support</h2>
<p><a
href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3
is raising ~$40,000 USD</a> to release HTTP/2 support and ensure
long-term sustainable maintenance of the project after a sharp decline
in financial support. If your company or organization uses Python and
would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and
thousands of other projects <a
href="https://opencollective.com/urllib3">please consider contributing
financially</a> to ensure HTTP/2 support is developed sustainably and
maintained for the long-haul.</p>
<p>Thank you for your support.</p>
<h2>Changes</h2>
<ul>
<li>Fixed a security issue where decompression-bomb safeguards of the
streaming API were bypassed when HTTP redirects were followed.
(CVE-2026-21441 reported by <a
href="https://github.com/D47A"><code>@D47A</code></a>, 8.9 High,
GHSA-38jv-5279-wg99)</li>
<li>Started treating <code>Retry-After</code> times greater than 6 hours
as 6 hours by default. (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3743">urllib3/urllib3#3743</a>)</li>
<li>Fixed <code>urllib3.connection.VerifiedHTTPSConnection</code> on
Emscripten. (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3752">urllib3/urllib3#3752</a>)</li>
</ul>
<h2>2.6.2</h2>
<h2>🚀 urllib3 is fundraising for HTTP/2 support</h2>
<p><a
href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3
is raising ~$40,000 USD</a> to release HTTP/2 support and ensure
long-term sustainable maintenance of the project after a sharp decline
in financial support. If your company or organization uses Python and
would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and
thousands of other projects <a
href="https://opencollective.com/urllib3">please consider contributing
financially</a> to ensure HTTP/2 support is developed sustainably and
maintained for the long-haul.</p>
<p>Thank you for your support.</p>
<h2>Changes</h2>
<ul>
<li>Fixed <code>HTTPResponse.read_chunked()</code> to properly handle
leftover data in the decoder's buffer when reading compressed chunked
responses. (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3734">urllib3/urllib3#3734</a>)</li>
</ul>
<h2>2.6.1</h2>
<h2>🚀 urllib3 is fundraising for HTTP/2 support</h2>
<p><a
href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3
is raising ~$40,000 USD</a> to release HTTP/2 support and ensure
long-term sustainable maintenance of the project after a sharp decline
in financial support. If your company or organization uses Python and
would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and
thousands of other projects <a
href="https://opencollective.com/urllib3">please consider contributing
financially</a> to ensure HTTP/2 support is developed sustainably and
maintained for the long-haul.</p>
<p>Thank you for your support.</p>
<h2>Changes</h2>
<ul>
<li>Restore previously removed <code>HTTPResponse.getheaders()</code>
and <code>HTTPResponse.getheader()</code> methods. (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3731">#3731</a>)</li>
</ul>
<h2>2.6.0</h2>
<h2>🚀 urllib3 is fundraising for HTTP/2 support</h2>
<p><a
href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3
is raising ~$40,000 USD</a> to release HTTP/2 support and ensure
long-term sustainable maintenance of the project after a sharp decline
in financial support. If your company or organization uses Python and
would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and
thousands of other projects <a
href="https://opencollective.com/urllib3">please consider contributing
financially</a> to ensure HTTP/2 support is developed sustainably and
maintained for the long-haul.</p>
<p>Thank you for your support.</p>
<h2>Security</h2>
<ul>
<li>Fixed a security issue where streaming API could improperly handle
highly compressed HTTP content ("decompression bombs") leading
to excessive resource consumption even when a small amount of data was
requested. Reading small chunks of compressed data is safer and much
more efficient now. (CVE-2025-66471 reported by <a
href="https://github.com/Cycloctane"><code>@Cycloctane</code></a>, 8.9
High, GHSA-2xpw-w6gg-jr37)</li>
<li>Fixed a security issue where an attacker could compose an HTTP
response with virtually unlimited links in the
<code>Content-Encoding</code> header, potentially leading to a denial of
service (DoS) attack by exhausting system resources during decoding. The
number of allowed chained encodings is now limited to 5. (CVE-2025-66418
reported by <a
href="https://github.com/illia-v"><code>@illia-v</code></a>, 8.9 High,
GHSA-gm62-xv2j-4w53)</li>
</ul>
<blockquote>
<p>[!IMPORTANT]</p>
<ul>
<li>If urllib3 is not installed with the optional
<code>urllib3[brotli]</code> extra, but your environment contains a
Brotli/brotlicffi/brotlipy package anyway, make sure to upgrade it to at
least Brotli 1.2.0 or brotlicffi 1.2.0.0 to benefit from the security
fixes and avoid warnings. Prefer using <code>urllib3[brotli]</code> to
install a compatible Brotli package automatically.</li>
</ul>
</blockquote>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's
changelog</a>.</em></p>
<blockquote>
<h1>2.6.3 (2026-01-07)</h1>
<ul>
<li>Fixed a high-severity security issue where decompression-bomb
safeguards of
the streaming API were bypassed when HTTP redirects were followed.
(<code>GHSA-38jv-5279-wg99
<https://github.com/urllib3/urllib3/security/advisories/GHSA-38jv-5279-wg99></code>__)</li>
<li>Started treating <code>Retry-After</code> times greater than 6 hours
as 6 hours by
default. (<code>[#3743](https://github.com/urllib3/urllib3/issues/3743)
<https://github.com/urllib3/urllib3/issues/3743></code>__)</li>
<li>Fixed <code>urllib3.connection.VerifiedHTTPSConnection</code> on
Emscripten.
(<code>[#3752](https://github.com/urllib3/urllib3/issues/3752)
<https://github.com/urllib3/urllib3/issues/3752></code>__)</li>
</ul>
<h1>2.6.2 (2025-12-11)</h1>
<ul>
<li>Fixed <code>HTTPResponse.read_chunked()</code> to properly handle
leftover data in
the decoder's buffer when reading compressed chunked responses.
(<code>[#3734](https://github.com/urllib3/urllib3/issues/3734)
<https://github.com/urllib3/urllib3/issues/3734></code>__)</li>
</ul>
<h1>2.6.1 (2025-12-08)</h1>
<ul>
<li>Restore previously removed <code>HTTPResponse.getheaders()</code>
and
<code>HTTPResponse.getheader()</code> methods.
(<code>[#3731](https://github.com/urllib3/urllib3/issues/3731)
<https://github.com/urllib3/urllib3/issues/3731></code>__)</li>
</ul>
<h1>2.6.0 (2025-12-05)</h1>
<h2>Security</h2>
<ul>
<li>Fixed a security issue where streaming API could improperly handle
highly
compressed HTTP content ("decompression bombs") leading to
excessive resource
consumption even when a small amount of data was requested. Reading
small
chunks of compressed data is safer and much more efficient now.
(<code>GHSA-2xpw-w6gg-jr37
<https://github.com/urllib3/urllib3/security/advisories/GHSA-2xpw-w6gg-jr37></code>__)</li>
<li>Fixed a security issue where an attacker could compose an HTTP
response with
virtually unlimited links in the <code>Content-Encoding</code> header,
potentially
leading to a denial of service (DoS) attack by exhausting system
resources
during decoding. The number of allowed chained encodings is now limited
to 5.
(<code>GHSA-gm62-xv2j-4w53
<https://github.com/urllib3/urllib3/security/advisories/GHSA-gm62-xv2j-4w53></code>__)</li>
</ul>
<p>.. caution::</p>
<ul>
<li>If urllib3 is not installed with the optional
<code>urllib3[brotli]</code> extra, but
your environment contains a Brotli/brotlicffi/brotlipy package anyway,
make
sure to upgrade it to at least Brotli 1.2.0 or brotlicffi 1.2.0.0 to
benefit from the security fixes and avoid warnings. Prefer using</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/urllib3/urllib3/commit/0248277dd7ac0239204889ca991353ad3e3a1ddc"><code>0248277</code></a>
Release 2.6.3</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/8864ac407bba8607950025e0979c4c69bc7abc7b"><code>8864ac4</code></a>
Merge commit from fork</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/70cecb27ca99d56aaaeb63ac27ee270ef2b24c5c"><code>70cecb2</code></a>
Fix Scorecard issues related to vulnerable dev dependencies (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3755">#3755</a>)</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/41f249abe1ef3e20768588969c4035aba060a359"><code>41f249a</code></a>
Move "v2.0 Migration Guide" to the end of the table of
contents (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3747">#3747</a>)</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/fd4dffd2fc544166b76151a2fa3d7b7c0eab540c"><code>fd4dffd</code></a>
Patch <code>VerifiedHTTPSConnection</code> for Emscripten (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3752">#3752</a>)</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/13f0bfd55e4468fe1ea9c6f809d3a87b0f93ebab"><code>13f0bfd</code></a>
Handle massive values in Retry-After when calculating time to sleep for
(<a
href="https://redirect.github.com/urllib3/urllib3/issues/3743">#3743</a>)</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/8c480bf87bcefd321b3a1ae47f04e908b6b2ed7b"><code>8c480bf</code></a>
Bump actions/upload-artifact from 5.0.0 to 6.0.0 (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3748">#3748</a>)</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/4b40616e959c0a2c466e8075f2a785a9f99bb0c1"><code>4b40616</code></a>
Bump actions/cache from 4.3.0 to 5.0.1 (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3750">#3750</a>)</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/82b8479663d037d220c883f1584dd01a43bb273b"><code>82b8479</code></a>
Bump actions/download-artifact from 6.0.0 to 7.0.0 (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3749">#3749</a>)</li>
<li><a
href="https://github.com/urllib3/urllib3/commit/34284cb01700bb7d4fdd472f909e22393e9174e2"><code>34284cb</code></a>
Mention experimental features in the security policy (<a
href="https://redirect.github.com/urllib3/urllib3/issues/3746">#3746</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/urllib3/urllib3/compare/2.5.0...2.6.3">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/Stirling-Tools/Stirling-PDF/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
This pull request updates the Docker build caching strategy in the
GitHub Actions workflow to improve cache isolation and efficiency. The
main change is the introduction of a cache `scope` based on the
`artifact-suffix` matrix value.
**Build caching improvements:**
*
[`.github/workflows/build.yml`](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L329-R330):
Updated `cache-from` and `cache-to` in the Docker build step to use a
scoped cache (`scope=${{ matrix.artifact-suffix }}`), enabling better
cache isolation across different build variants.
# Description of Changes
This pull request updates the Arabic translation file
(`frontend/public/locales/ar-AR/translation.toml`) with a large number
of new and improved strings, adding support for new features and
enhancing clarity and coverage across the application. Additionally, it
makes several improvements to the TOML language check script
(`.github/scripts/check_language_toml.py`) and updates the corresponding
GitHub Actions workflow to better track and validate translation
changes.
**Translation updates and enhancements:**
* Added translations for new features and UI elements, including
annotation tools, PDF/A-3b conversion, line art compression, background
removal, split modes, onboarding tours, and more.
[[1]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR343-R346)
[[2]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR442-R460)
[[3]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR514-R523)
[[4]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR739-R743)
[[5]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR1281-R1295)
[[6]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR1412-R1416)
[[7]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR2362-R2365)
[[8]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR2411-R2415)
[[9]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR2990)
[[10]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR3408-R3420)
[[11]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR3782-R3794)
[[12]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR3812-R3815)
[[13]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR3828-R3832)
[[14]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effL3974-R4157)
[[15]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR4208-R4221)
[[16]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR5247)
[[17]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR5414-R5423)
[[18]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR5444-R5447)
* Improved and expanded coverage for settings, security, onboarding, and
help menus, including detailed descriptions and tooltips for new and
existing features.
[[1]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR442-R460)
[[2]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR5247)
[[3]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR5414-R5423)
[[4]](diffhunk://#diff-460d5f61a7649a5b149373af2e52a8a87d9a1964cf54240a78ad4747e7233effR5444-R5447)
**TOML language check script improvements:**
* Increased the maximum allowed TOML file size from 500 KB to 570 KB to
accommodate larger translation files.
* Improved file validation logic to more accurately skip or process
files based on directory structure and file type, and added informative
print statements for skipped files.
* Enhanced reporting in the difference check: now, instead of raising
exceptions for unsafe files or oversized files, the script logs warnings
and continues processing, improving robustness and clarity in CI
reports.
* Adjusted the placement of file check report lines for clarity in the
generated report.
**Workflow and CI improvements:**
* Updated the GitHub Actions workflow
(`.github/workflows/check_toml.yml`) to trigger on changes to the
translation script and workflow files, in addition to translation TOMLs,
ensuring all relevant changes are validated.
These changes collectively improve the translation quality and coverage
for Arabic users, enhance the reliability and clarity of the translation
validation process, and ensure smoother CI/CD workflows for localization
updates.
<img width="654" height="133" alt="image"
src="https://github.com/user-attachments/assets/9f3e505d-927f-4dc0-9098-cee70bbe85ca"
/>
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
This pull request introduces support for converting PDF files to eBook
formats (EPUB and AZW3) in the frontend. It adds new user interface
options for PDF-to-eBook conversion, updates the conversion logic and
parameters, and ensures the new formats are integrated into the
conversion matrix and endpoints. The most important changes are grouped
below:
**PDF to eBook (EPUB/AZW3) Conversion Support**
* Added a new `ConvertToEpubSettings` component that provides UI
controls for PDF-to-eBook options, including chapter detection, target
device selection, and output format.
(`frontend/src/core/components/tools/convert/ConvertToEpubSettings.tsx`)
* Updated `ConvertSettings` to render the new eBook options when
converting from PDF to EPUB or AZW3, and set default values for these
options.
(`frontend/src/core/components/tools/convert/ConvertSettings.tsx`)
* Extended the `ConvertParameters` interface and default parameters to
include `epubOptions` for the new settings.
(`frontend/src/core/hooks/tools/convert/useConvertParameters.ts`)
**Conversion Logic and API Integration**
* Updated the conversion endpoints, endpoint names, and conversion
matrix to support PDF-to-EPUB/AZW3 conversions.
(`frontend/src/core/constants/convertConstants.ts`)
* Modified the conversion operation logic to handle `epubOptions` and
ensure that PDF-to-eBook conversions process each file separately and
send the correct options to the backend.
(`frontend/src/core/hooks/tools/convert/useConvertOperation.ts`)
**Localization and Tool Registry Updates**
* Added localization strings for the new eBook conversion options.
(`frontend/public/locales/en-GB/translation.toml`)
* Registered the new PDF-to-eBook operation in the tool catalog and test
helpers. (`frontend/src/core/data/useTranslatedToolRegistry.tsx`,
`frontend/src/core/tests/helpers/conversionEndpointDiscovery.ts`)
<img width="364" height="995" alt="image"
src="https://github.com/user-attachments/assets/c54c50c0-1b86-4074-aef8-b038c6caeb49"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Co-authored-by: Anthony Stirling <77850077+Frooodle@users.noreply.github.com>
# Description of Changes
This pull request introduces Telegram bot integration to the
application, enabling users to send files via Telegram for processing
through the pipeline. The main changes add configuration options,
dependency management, and a new service for handling Telegram
interactions.
**Telegram bot integration:**
* Added a new `TelegramPipelineBot` service (`TelegramPipelineBot.java`)
that listens for incoming Telegram messages, downloads attached files or
photos, places them in a pipeline inbox folder, waits for processing
results, and sends the output files back to the user. The service
includes error handling and status messaging.
* Introduced a `TelegramBotConfig` configuration class to initialize and
register the Telegram bot only when enabled via application properties.
* Added a new `Telegram` configuration section to
`ApplicationProperties` and the `settings.yml.template`, supporting
options like enabling/disabling the bot, bot token/username, pipeline
folder, processing timeout, and polling interval.
[[1]](diffhunk://#diff-1c357db0a3e88cf5bedd4a5852415fadad83b8b3b9eb56e67059d8b9d8b10702R63)
[[2]](diffhunk://#diff-1c357db0a3e88cf5bedd4a5852415fadad83b8b3b9eb56e67059d8b9d8b10702R580-R589)
[[3]](diffhunk://#diff-12f23603ae35319a3ea08f91b6340d5d935216941fda2e69d2df1b6cd22a63f2R108-R115)
**Dependency management:**
* Added the `org.telegram:telegrambots` library to the project
dependencies to support Telegram bot functionality.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Anthony Stirling <77850077+Frooodle@users.noreply.github.com>
[//]: # (dependabot-start)
⚠️ **Dependabot is rebasing this PR** ⚠️
Rebasing might not happen immediately, so don't worry if this takes some
time.
Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.
---
[//]: # (dependabot-end)
Bumps nginx from `8491795` to `c083c37`.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps node from 20-alpine to 25-alpine.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Auto-generated by stirlingbot[bot]
This PR updates the backend license report based on dependency changes.
Signed-off-by: stirlingbot[bot] <stirlingbot[bot]@users.noreply.github.com>
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
# Description of Changes
```console
index-DsORDqQQ.js:124 \n [TauriHttpClient] Network error: \n{url: 'http://localhost:8080/api/v1/admin/settings', method: 'PUT', errorType: 'ERR_NETWORK', originalMessage: `Failed to execute 'close' on 'ReadableStreamDefaul…cted token 'S', "Successful"... is not valid JSON`, stack: `SyntaxError: Unexpected token 'S', "Successful"...…lback (<anonymous>:284:7)\n at <anonymous>:1:28`}\nerrorType\n: \n"ERR_NETWORK"\nmethod\n: \n"PUT"\noriginalMessage\n: \n"Failed to execute 'close' on 'ReadableStreamDefaultController': Unexpected token 'S', \"Successful\"... is not valid JSON"\nstack\n: \n"SyntaxError: Unexpected token 'S', \"Successful\"... is not valid JSON\n at A.onmessage (http://tauri.localhost/assets/index-DsORDqQQ.js:124:22714)\n at http://tauri.localhost/assets/index-DsORDqQQ.js:124:20748\n at <anonymous>:272:26\n at Object.runCallback (<anonymous>:284:7)\n at <anonymous>:1:28"\nurl\n: \n"http://localhost:8080/api/v1/admin/settings"
index-DXbk7lbS.js:124 \n [TauriHttpClient] Network error: \n{url: 'http://localhost:8080/api/v1/user/get-api-key', method: 'POST', errorType: 'ERR_NETWORK', originalMessage: `Failed to execute 'close' on 'ReadableStreamDefaul…cted token 'a', "a72f6b26-1"... is not valid JSON`, stack: `SyntaxError: Unexpected token 'a', "a72f6b26-1"...…lback (<anonymous>:284:7)\n at <anonymous>:1:28`}\nerrorType\n: \n"ERR_NETWORK"\nmethod\n: \n"POST"\noriginalMessage\n: \n"Failed to execute 'close' on 'ReadableStreamDefaultController': Unexpected token 'a', \"a72f6b26-1\"... is not valid JSON"\nstack\n: \n"SyntaxError: Unexpected token 'a', \"a72f6b26-1\"... is not valid JSON\n at A.onmessage (http://tauri.localhost/assets/index-DXbk7lbS.js:124:22714)\n at http://tauri.localhost/assets/index-DXbk7lbS.js:124:20748\n at <anonymous>:272:26\n at Object.runCallback (<anonymous>:284:7)\n at <anonymous>:1:28"\nurl\n: \n"http://localhost:8080/api/v1/user/get-api-key"
```
This pull request fixes a self-hosting issue where the Tauri HTTP client
fails with `Unexpected token ... is not valid JSON` because certain API
endpoints returned plain text responses.
## What was changed
- Updated `AdminSettingsController`:
- Changed `updateSettings` and `updateSettingsSection` to return
structured JSON objects instead of raw strings.
- Standardized success and error payloads using a `Map<String, Object>`
with keys like `message` and `error`.
- Updated `UserController`:
- Changed `/api/v1/user/get-api-key` and `/api/v1/user/update-api-key`
to return JSON objects (`{ "apiKey": "..." }`) and JSON error objects
instead of plain text.
## Why the change was made
- The Tauri client expects JSON responses and attempts to parse them.
Returning plain strings like `"Successful..."` or an API key string
causes JSON parsing to fail, resulting in network errors on self-hosted
setups.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Co-authored-by: James Brunton <jbrunton96@gmail.com>
# Description of Changes
Note on Simple Java Mail:
- SJM contains Angus/Jakarta Mail in it.
- SJM is a very thin layer on Angus Mail; see here:
https://github.com/bbottema/simple-java-mail
- SJM gives high level methods to more reliably parse in email via Angus
Mail, but also contains lots of other interesting features.
- SJM is Apache 2 licensed
This pull request updates the email processing utilities to add support
for parsing and validating Outlook MSG files, refactors the
`EmlProcessingUtils` utility class to use instance methods and improved
resource management, and enhances the handling and styling of generated
email HTML. The changes also introduce external CSS resource loading
with a fallback mechanism, and update dependencies to support MSG file
parsing.
**MSG file support and validation:**
- Added `simple-java-mail` and `outlook-module` dependencies to enable
EML and MSG file parsing, and updated validation logic to recognize and
accept MSG files by checking their magic bytes.
(`app/common/build.gradle`, `EmlProcessingUtils.java`)
**Refactoring and modernization of `EmlProcessingUtils`:**
- Converted static methods and fields in `EmlProcessingUtils` to
instance methods/fields, improving testability and future extensibility.
(`EmlProcessingUtils.java`)
**Enhanced HTML/CSS styling for email rendering:**
- Updated HTML generation to use consistent formatting and improved
style variable usage, and refactored CSS injection to load from an
external resource (`email-pdf-styles.css`) with a synchronized cache and
a minimal fallback if the resource is missing.
(`EmlProcessingUtils.java`)
**Attachment and content rendering improvements:**
- Improved the formatting of meta-information (e.g., CC, BCC, Date) and
attachment sections in generated email HTML, and ensured more robust
handling of empty or missing content. (`EmlProcessingUtils.java`)
**General code cleanup and logging:**
- Added SLF4J logging for error handling when loading CSS resources, and
cleaned up imports and method signatures for clarity and
maintainability. (`EmlProcessingUtils.java`)
<img width="367" height="991" alt="image"
src="https://github.com/user-attachments/assets/0cfb959c-da92-4cff-9e52-ff4ab7fa806e"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [X] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
Updated the Irish (ga-IE) translation by adding the 117 missing entries
and reviewing the remaining untranslated keys. After translation, some
34 items were identified as not requiring translation and have been
added to the ignore list (ignore_translation.toml).
# Description of Changes
This pull request introduces several improvements focused on security
and reliability in both the Docker build process and the backend API.
The most significant changes are the use of digest-pinned Docker base
images to ensure reproducible builds, safer handling of user-provided
filenames in error messages, and a switch to more reliable dependency
installation in CI workflows.
**Docker image security and reproducibility:**
* All Dockerfiles now use digest-pinned base images (e.g.,
`node:20-alpine@sha256:...`, `gradle:8.14-jdk21@sha256:...`,
`alpine:3.22.1@sha256:...`, `nginx:alpine@sha256:...`) to guarantee
build consistency and protect against upstream image changes.
[[1]](diffhunk://#diff-f8faae0938488156cf26e9322ffdf755deaa8770a7ac8c524dd6126c19548888L5-R5)
[[2]](diffhunk://#diff-f8faae0938488156cf26e9322ffdf755deaa8770a7ac8c524dd6126c19548888L18-R18)
[[3]](diffhunk://#diff-f8faae0938488156cf26e9322ffdf755deaa8770a7ac8c524dd6126c19548888L38-R38)
[[4]](diffhunk://#diff-2f5cd3ad965c86a7a5b4af6e0513ad294e0426644d9f5b5358dfb16a2ef995a7L5-R5)
[[5]](diffhunk://#diff-2f5cd3ad965c86a7a5b4af6e0513ad294e0426644d9f5b5358dfb16a2ef995a7L18-R18)
[[6]](diffhunk://#diff-2f5cd3ad965c86a7a5b4af6e0513ad294e0426644d9f5b5358dfb16a2ef995a7L37-R37)
[[7]](diffhunk://#diff-e9edf3a05475d0721a0e65be1ba0eeb162ae972891b0f6d7e1285687efab1de0L9-R9)
[[8]](diffhunk://#diff-fa0700cfd7d90d832649eb1d0503904564bb3b28c48972be7d9f17e4ce32a3dcL9-R9)
[[9]](diffhunk://#diff-2e766aaf0c87e7b8a62d2a2986f6999c38cc35f677479e31b77d1b427c7aeef7L5-R5)
[[10]](diffhunk://#diff-1726db0cbef194c9be3cba9825c0794802b154e15e4c892c1544d0aace03e037L5-R5)
[[11]](diffhunk://#diff-c1b6dd504a16fc68cd064baf9cf07d9dd31da56eb55de69601844ab03a5ae319L5-R5)
[[12]](diffhunk://#diff-2fc7fcfcfdbb617dd8fbb6b1a2ea5709f9018d618d13942cb33d3e0ed127df16L5-R5)
[[13]](diffhunk://#diff-2fc7fcfcfdbb617dd8fbb6b1a2ea5709f9018d618d13942cb33d3e0ed127df16L39-R39)
[[14]](diffhunk://#diff-759e94102d21fe6f9bde8ddb0b4f95b5d5cd214b0355ea0419d3ea6c09e8ffbfL2-R2)
[[15]](diffhunk://#diff-759e94102d21fe6f9bde8ddb0b4f95b5d5cd214b0355ea0419d3ea6c09e8ffbfL19-R19)
**Backend API security:**
* In `ConvertEmlToPDF.java`, error messages now escape user-provided
filenames using `HtmlUtils.htmlEscape`, preventing potential XSS
vulnerabilities when displaying error messages that include filenames.
[[1]](diffhunk://#diff-45d22a96bae3e8a746b7fb2c39e25c80aee0bf733b528a3517db8fdd2a3d25cdR13)
[[2]](diffhunk://#diff-45d22a96bae3e8a746b7fb2c39e25c80aee0bf733b528a3517db8fdd2a3d25cdR156-R170)
**CI/CD reliability:**
* All GitHub Actions workflows (`multiOSReleases.yml`,
`releaseArtifacts.yml`, `tauri-build.yml`) now use `npm ci` instead of
`npm install` for frontend dependency installation, ensuring clean,
reproducible installs that match the lockfile.
[[1]](diffhunk://#diff-895b214ee023c8c26048a2a3b946cfb1ebc4f26fbc8a9c2fa54b77c12e763b6bL271-R271)
[[2]](diffhunk://#diff-699ff98fe113446c403eb07daf16dd1966c2a047ab0b9f7e38fd695d079f7dddL177-R177)
[[3]](diffhunk://#diff-b34ab107dd4bc92075b2e89b6f16e4a2813e267ca7c2afebdb1931a0a3900d5aL177-R177)
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
### What was changed
- Refactored Gradle task configuration to use `tasks.named` and
`configureEach` for better lazy configuration and compatibility.
- Centralized JaCoCo report handling by introducing a single
`jacocoReport` task reference.
- Added a post-processing step to the JaCoCo XML report to:
- Parse coverage metrics (LINE, INSTRUCTION, BRANCH).
- Calculate coverage ratios.
- Print a formatted coverage summary table directly to the build logs.
- Enabled and aligned `jacocoTestCoverageVerification` rules with
defined minimum coverage thresholds.
- Ensured the `build` task depends on the JaCoCo report to always
generate coverage output.
### Why the change was made
- To improve visibility of test coverage results directly in CI and
local builds without manually opening the HTML report.
- To enforce consistent and explicit coverage thresholds for key
metrics.
- To modernize Gradle task configuration and avoid eager task
realization.
---
> Task :proprietary:jacocoTestReport
==== JaCoCo Coverage Summary ====
Metric | Coverage | Covered/Total | Status | Target
------------|----------|---------------|--------|----------
LINE | 9.01% | 759/8426 | FAIL | >= 16.00%
INSTRUCTION | 8.41% | 2741/32590 | FAIL | >= 14.00%
BRANCH | 6.04% | 248/4103 | FAIL | >= 9.00%
---
> Task :common:jacocoTestReport
==== JaCoCo Coverage Summary ====
| Metric | Coverage | Covered/Total | Status | Target
|------------|----------|---------------|--------|----------
LINE | 39.47% | 2996/7591 | PASS | >= 16.00%
INSTRUCTION | 41.05% | 12868/31345 | PASS | >= 14.00%
BRANCH | 33.43% | 1166/3488 | PASS | >= 9.00%
---
> Task :stirling-pdf:jacocoTestReport
==== JaCoCo Coverage Summary ====
Metric | Coverage | Covered/Total | Status | Target
------------|----------|---------------|--------|----------
LINE | 13.63% | 2554/18741 | FAIL | >= 16.00%
INSTRUCTION | 14.59% | 11459/78532 | PASS | >= 14.00%
BRANCH | 10.68% | 868/8124 | PASS | >= 9.00%
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
Fixed an issue where PDFs containing XMP metadata but lacking PDF/A
identification schema were incorrectly being validated as PDF/A
documents and reporting "PDF/A-1b with errors" instead of "NOT PDF/A".
### Changes Made
- Improved the PDF/A detection logic in `VeraPDFService.java` to check
for both missing XMP metadata and missing PDF/A identification schema
- Added validation for clause 6.7.11 (PDF/A Identification extension
schema requirement) in addition to clause 6.7.2 (XMP metadata presence)
- Documents with XMP metadata but without proper PDF/A identification
now correctly return "NOT PDF/A"
### Root Cause
The previous implementation only checked for missing XMP metadata
(clause 6.7.2) but didn't verify that the XMP contained the required
PDF/A identification schema (clause 6.7.11). This caused documents with
generic XMP metadata to be incorrectly treated as declared PDF/A files.
Fixes issue where non-PDF/A documents with XMP metadata were incorrectly
showing PDF/A validation errors.
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
- Just build proper installers in CI for each platform
- Provide commands to build just the bundled apps without the need for
installers locally
- `tauri-dev` - Builds quickly for an unoptimised version of the app
- `tauri-build` - Builds the full optimised app installer for release
- `tauri-build-dev` - Builds an optimised app with no bundling (builds
to a folder on Mac; raw `.exe` on Windows; etc.)
- `tauri-build-dev-mac` - Builds an optimised bundled Mac app with no
installer (as an `.app` file)
- `tauri-build-dev-windows` - Builds an optimised bundled Windows app as
an `.nsis` installer
- `tauri-build-dev-linux` - Builds an optimised bundled Linux app as an
`.appimage`
# Description of Changes
PDF editor has been impossible to access since #5169. This fixes the bug
introduced in that which made it impossible to access. The main issue
was the refactor removed the `setLeftPanelView` call.
I have been trying to get this perfect for a while, but this is the best
I can do. I tried to get the open files button to be sticky at the
bottom, but beyond certain zoom levels, this causes it to disappear. Not
worth spending more time on it right now.
Co-authored-by: James Brunton <jbrunton96@gmail.com>
# Description of Changes
Currently when applying stamps, the preview of the PDF is not being
treated as private content. This correctly marks the content as private
# Description of Changes
* Transparency Fix: Implemented a pre-processing step that adds an
opaque white background to pages before conversion. This ensures that
transparent elements are correctly
flattened against white rather than defaulting to black (a common issue
in Ghostscript flattening).
* Color Distortion Fix: Removed a misconfigured -sDefaultCMYKProfile
setting in the Ghostscript command that was incorrectly pointing to an
RGB profile. This resolves the
"dark/black" color corruption previously seen in print-ready CMYK PDFs.
* PDF/A Compliance Improvements:
* Font Handling: Updated fixType1FontCharSet to only add a standard
CharSet if it is missing or empty. This prevents validation errors where
subsetted fonts were being forced
to declare glyphs they did not contain.
* Spot Color Unification: Added fixSeparationColorSpaces to detect and
unify TintTransform objects for Separation colors with the same colorant
name, ensuring consistency
across document resources.
* OCG Naming: Ensured all Optional Content Groups have a valid Name
entry.
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
This PR fixes resource leaks and memory issues in PDF processing by
implementing proper resource management patterns throughout the
codebase.
## Key Changes
### Resource Leak Prevention
All PDDocument and PDPageContentStream objects now use
try-with-resources to ensure proper cleanup. Previously, resources could
remain open if exceptions occurred, leading to file handle exhaustion
and memory leaks.
### Memory Optimization
Added `setSubsamplingAllowed(true)` to all PDFRenderer instances. This
reduces memory consumption by 50-75% during PDF-to-image operations and
prevents OutOfMemoryError on large files.
**Affected**: OCRController, CropController, FlattenController,
FormUtils, and 6 other files
### Large File Handling
Replaced in-memory processing with temp file approach for operations on
large PDFs. This prevents loading entire documents into memory.
**Example (GetInfoOnPDF.java):**
- Before: Loaded entire PDF into ByteArrayOutputStream
- After: Saves to temp file, streams from disk, cleans up in finally
block
**Also changed**: PrintFileController, SplitPdfBySizeController
### PDPageContentStream Construction
Standardized constructor calls with explicit parameters:
- AppendMode: Controls content placement
- compress: true for stream compression
- resetContext: true for clean graphics state
This prevents graphics state corruption and provides better control over
rendering.
### Exception Handling
- Added NoSuchFileException handling for temp file issues
- Check if response is committed before sending error responses
- Better error messages for temp file cleanup failures
### Code Quality
- Replaced loops with IntStream where appropriate
(SplitPdfBySectionsController)
- Updated deprecated API usage (PDAnnotationTextMarkup →
PDAnnotationHighlight)
- Added null checks in Type3FontLibrary
- Removed redundant document.close() calls
### Dependencies
Added `org.apache.pdfbox:pdfbox-io` dependency for proper I/O handling.
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
TLDR:
- Use try-with-resources for InputStreams, PDDocument, TempFile, and
ByteArrayOutputStream to ensure proper cleanup
- Refactor PDF manipulation methods to handle exceptions and resource
closure more robustly
- Simplify session sorting logic in SessionPersistentRegistry
- Add missing resource cleanup in MergeController and
SplitPdfBySectionsController
- Update PrintFileController to close streams and documents safely
- Add unit test for SplitPdfBySizeController
# Description of Changes
This pull request introduces several improvements to resource management
and error handling throughout the codebase, especially for temporary
files and PDF document objects. The changes help prevent resource leaks
by ensuring files and documents are properly closed or deleted in the
event of errors or after use. Notable updates include the use of
try-with-resources, custom AutoCloseable wrappers, and enhanced error
handling logic.
**Resource Management and Error Handling Improvements**
* Added try-catch blocks to delete temporary files if an exception
occurs during file conversion in `GeneralUtils.java`, ensuring no
orphaned temp files are left behind
* Introduced the `TempFile` AutoCloseable helper class in
`InvertFullColorStrategy.java`, and refactored the PDF processing logic
to use try-with-resources for both temporary files and `PDDocument`
objects, ensuring proper cleanup
* Improved error handling in `MergeController.java` by ensuring that
partially created merged documents are closed if an error occurs during
the merge process
* Enhanced the splitting logic in `SplitPdfBySectionsController.java` to
close any partially created `PDDocument` objects if an exception is
thrown, preventing resource leaks
**Refactoring for Safer Document Handling**
* Refactored `handleSplitBySize` in `SplitPdfBySizeController.java` to
use a custom `DocHolder` AutoCloseable wrapper for managing the
lifecycle of `PDDocument` objects, and updated all related logic to use
this wrapper, improving code safety and clarity
* Updated `handleSplitByPageCount` in `SplitPdfBySizeController.java` to
ensure `PDDocument` objects are set to null after being saved and
closed, reducing the risk of operating on closed resources
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
This pull request makes several updates to the repository’s CI/CD
configuration, focusing on improving workflow automation, updating Java
versions, enhancing labeling and file ownership, and cleaning up unused
files. The most significant changes involve migrating workflows and
labels to support a new `V3` branch, updating build environments to use
JDK 21, and expanding automated dependency update coverage.
**Key changes include:**
### CI/CD Workflow Updates
* Updated all GitHub Actions workflows (`build.yml`,
`PR-Demo-Comment-with-react.yml`, etc.) to use JDK 21 instead of JDK 17
for Java builds, ensuring compatibility with newer Java features and
dependencies.
[[1]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L120-R125)
[[2]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R180-R187)
[[3]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L226-R232)
[[4]](diffhunk://#diff-8d23782ae5caff72d55828bb25814854f5f2523f299d7dbcda4a3537dd84c5c3L154-R154)
[[5]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L288-L298)
* Removed the now-unused `codeql.yml-disabled` file, cleaning up
deprecated static analysis configuration.
* Added a dedicated `frontend-validation` job in `build.yml` that only
runs when frontend files change, improving CI efficiency.
* Minor workflow improvements: consistent quoting in config paths,
improved cache settings, and small cleanups in deploy scripts.
[[1]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L150-R152)
[[2]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L244-R247)
[[3]](diffhunk://#diff-7cdd3ccec44c8ba176bdc3b9ef54c3f56aa210a1a4e2bb5f79d87b1e50314a18L29-R29)
[[4]](diffhunk://#diff-f8b6ec3c0af9cd2d8dffef6f3def2be6357fe596a606850ca7f5d799e1349069L87)
[[5]](diffhunk://#diff-f8b6ec3c0af9cd2d8dffef6f3def2be6357fe596a606850ca7f5d799e1349069L120-L127)
[[6]](diffhunk://#diff-f8b6ec3c0af9cd2d8dffef6f3def2be6357fe596a606850ca7f5d799e1349069L189)
[[7]](diffhunk://#diff-26fc40a450703e6602af586a24594196fb10e132de14a9a488ae64ee8cc51166L99)
[[8]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L30-R39)
[[9]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721L69-R75)
[[10]](diffhunk://#diff-5c3fa597431eda03ac3339ae6bf7f05e1a50d6fc7333679ec38e21b337cb6721R93)
### Branch and Label Management
* Migrated auto-labeler and build workflows to track the `V3` branch
instead of `V2`, and updated labels and labeler config to use `v3`
instead of `v2`.
[[1]](diffhunk://#diff-cfe84f4bb9657c721ff741644ee0bce45aa81aaef9dea1ea8741c946984e9722L7-R7)
[[2]](diffhunk://#diff-d3d79c492fbafebc87fbb739c553afea093a79344ff78b88fe785ac3ca7e7b3dL49-R75)
[[3]](diffhunk://#diff-080b7ef0dc11b28f262ea02985043c6229e353ecfdd5920b4d3b19f369f85dc6R87-R89)
* Added new labels for `v3`, `Rust`, `Tauri`, and
`license-review-required` to improve PR categorization and review
processes.
### Dependency Automation
* Expanded `dependabot.yml` to update Gradle dependencies in all
relevant subdirectories (`/`, `/app/common`, `/app/core`,
`/app/proprietary`) and ensured all ecosystems use the `rebase-strategy:
auto` setting for more reliable PR updates.
### File Ownership and Labeling
* Enhanced `.github/config/.files.yaml` to include new scripts and
frontend-related files under the correct project and frontend
categories, and introduced license file groups for both frontend and
backend.
[[1]](diffhunk://#diff-16e8af5ab290e6fdcf843429e4970b7dee6721897ad02c5291f259f47e0978deL5-R7)
[[2]](diffhunk://#diff-16e8af5ab290e6fdcf843429e4970b7dee6721897ad02c5291f259f47e0978deR34-R60)
* Improved labeler configuration to better match new frontend and
translation file patterns, and introduced a new label group for
Tauri-related files.
---
These changes collectively modernize the repository’s automation,
streamline maintenance, and prepare the project for ongoing work on the
`V3` branch.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Bumps org.sonarqube from 7.1.0.6387 to 7.2.2.6593.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps debian from `7cb087f` to `1c25564`.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description of Changes
This pull request updates dependency management and CI/CD configurations
to improve automation, security, and maintainability. The most
significant changes include expanding Dependabot coverage to more
directories and ecosystems, updating pre-commit and Python dependency
versions, and pinning action versions in GitHub workflows for better
reproducibility and security.
**Dependency Management Improvements:**
* Expanded Dependabot configuration in `.github/dependabot.yml` to
include additional directories and package ecosystems such as npm,
docker, cargo, and pip, ensuring automated dependency updates across
more parts of the project.
* Updated Python dependencies in
`.github/scripts/requirements_pre_commit.txt` to newer versions for
`cfgv`, `filelock`, `platformdirs`, `pre-commit`, and `virtualenv`,
improving compatibility and security.
[[1]](diffhunk://#diff-4b865d764c6955aa3ab06c7beff7c08a122e5145c1f0fecd7b4fd4575848b598L7-R17)
[[2]](diffhunk://#diff-4b865d764c6955aa3ab06c7beff7c08a122e5145c1f0fecd7b4fd4575848b598L27-R33)
[[3]](diffhunk://#diff-4b865d764c6955aa3ab06c7beff7c08a122e5145c1f0fecd7b4fd4575848b598L110-R112)
* Added `tomli-w` to `.github/scripts/requirements_sync_readme.in` and
`.github/scripts/requirements_sync_readme.txt` for TOML file writing
support.
[[1]](diffhunk://#diff-e359c7d332d374a67300c004d7bab6c37cb16b5e1b9c8cd63adf2b59462c1f06R2)
[[2]](diffhunk://#diff-cf0fa825b1295e115dbbe842a6f179ed0c72dd80b758d3238ab792cdd0013a4cR7-R10)
**CI/CD Workflow Enhancements:**
* Updated installation commands in `.github/workflows/check_toml.yml`
and `.github/workflows/sync_files_v2.yml` to use hashed and
version-pinned dependencies, improving reproducibility and security.
Also removed redundant dependency installation in the sync workflow.
[[1]](diffhunk://#diff-3117b4a93711d37b0a9a1668272eec716fea0b4f57dde16a85e7ab3f569c455dL203-R203)
[[2]](diffhunk://#diff-b1acd58f6bdc16d0f02514058f8842a8ec3c90e8771f6a1e83801fa14ee5041cL56-R56)
[[3]](diffhunk://#diff-b1acd58f6bdc16d0f02514058f8842a8ec3c90e8771f6a1e83801fa14ee5041cL68-L70)
* Pinned GitHub Actions versions in
`.github/workflows/deploy-on-v2-commit.yml` by using commit SHAs for
actions such as `actions/checkout`, `docker/setup-buildx-action`,
`docker/login-action`, and `docker/build-push-action`, ensuring builds
use known-good versions.
[[1]](diffhunk://#diff-f8b6ec3c0af9cd2d8dffef6f3def2be6357fe596a606850ca7f5d799e1349069L26-R29)
[[2]](diffhunk://#diff-f8b6ec3c0af9cd2d8dffef6f3def2be6357fe596a606850ca7f5d799e1349069L89-R96)
[[3]](diffhunk://#diff-f8b6ec3c0af9cd2d8dffef6f3def2be6357fe596a606850ca7f5d799e1349069L109-R109)
**Pre-commit Configuration Updates:**
* Updated hooks in `.pre-commit-config.yaml` to newer versions for
`ruff-pre-commit`, `gitleaks`, and `pre-commit-hooks`, providing
enhanced linting and security scanning.
[[1]](diffhunk://#diff-63a9c44a44acf85fea213a857769990937107cf072831e1a26808cfde9d096b9L3-R3)
[[2]](diffhunk://#diff-63a9c44a44acf85fea213a857769990937107cf072831e1a26808cfde9d096b9L25-R29)
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
TLDR:
- Introduced `ConvertFromCbrSettings` and `ConvertToCbrSettings`
components for handling conversion-specific settings.
- Updated `ConvertSettings` to include CBR-related configurations.
- Updated `useConvertParameters` with new parameters: `cbrOptions` and
`pdfToCbrOptions`.
- Updated locales with CBR-related translations.
- Added endpoints and updated conversion matrix for CBR formats in
`convertConstants`.
- Modified `useConvertOperation` to handle CBR-specific parameters
during form data preparation.
For backend see this PR: #4581
This pull request adds support for converting between CBR (Comic Book
Archive) and PDF formats in the frontend. It introduces new UI
components for configuring conversion options, updates the conversion
constants and logic, and ensures parameters for these conversions are
handled correctly throughout the app.
**CBR/PDF Conversion Features:**
* Added new UI components: `ConvertFromCbrSettings` for CBR to PDF
conversions (option to optimize for ebook readers), and
`ConvertToCbrSettings` for PDF to CBR conversions (DPI selection for
image rendering). These are conditionally rendered in
`ConvertSettings.tsx` based on selected formats.
**Conversion Logic and Constants:**
* Extended conversion endpoints, format options, conversion matrix, and
endpoint mappings to support CBR to PDF and PDF to CBR conversions.
* Updated `shouldProcessFilesSeparately` logic to handle PDF to CBR
conversions, ensuring each PDF generates its own archive.
**Parameter Handling:**
* Added new parameters (`cbrOptions` and `pdfToCbrOptions`) to the
conversion parameter interface and default values, ensuring they are
set/reset appropriately during format changes
* Modified form data construction to include new options for CBR/PDF
conversions (optimize for ebook, DPI).
### Frontend
<img width="1291" height="861" alt="image"
src="https://github.com/user-attachments/assets/fb63be66-6f40-4dde-8235-86c9ddfa1f7c"
/>
<img width="1411" height="1000" alt="image"
src="https://github.com/user-attachments/assets/529593c4-6f32-4b11-9754-7f334f40d32e"
/>
Note on RAR5. You can go back-and-forth with this converter due to the
fact on default pdf to cbr makes RAR5 meanwhile, cbr to pdf can only
RAR4 and below. This is unfortunate limitation of JunRAR library. In the
real world, generally RAR5s are not that common, and they mostly
unsupported by open-source software.
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Co-authored-by: Anthony Stirling <77850077+Frooodle@users.noreply.github.com>
Co-authored-by: Reece Browne <74901996+reecebrowne@users.noreply.github.com>
# Description of Changes
This pull request adds a new feature that allows users to automatically
remove the white background from uploaded signature images, making them
transparent. The changes include UI improvements for image uploading,
new image processing utilities, and updates to translation files for
better user feedback.
### Image Upload & Processing Enhancements
* Added a `removeWhiteBackground` utility function in
`imageTransparency.ts` to process images and remove white backgrounds,
with options for automatic corner color detection and tolerance
settings.
* Updated the `ImageUploader` component to support background removal,
including a checkbox for toggling the feature, processing state
feedback, and integration with the new utility
### Signature Tool Integration
* Modified `SignSettings.tsx` to enable the background removal feature
for signature images, handle processed image data, and ensure signature
placement logic works seamlessly with the new feature.
### UI & Localization Updates
* Added new translation strings for background removal and image
processing feedback in the English locale file.
https://github.com/user-attachments/assets/28263940-1756-4f0e-9bfb-5603a6fb8a2c
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
This pull request adds a new feature to the translation management
script, allowing users to automatically remove unused translations that
are not present in the `en-GB` (golden truth) file. The update includes
both the implementation in `translation_merger.py` and documentation in
`README.md`. The most important changes are grouped below:
**New Feature: Remove Unused Translations**
* Added a `remove-unused` command to `translation_merger.py`, which
removes translation keys from a target file if they are not present in
the `en-GB` reference. This includes backup support and a CLI interface.
[[1]](diffhunk://#diff-bb7f09f590ccabb456565d52afd66c1421525ddb1b6b65c0985aaab5a3c20ae7R282-R307)
[[2]](diffhunk://#diff-bb7f09f590ccabb456565d52afd66c1421525ddb1b6b65c0985aaab5a3c20ae7R397-R404)
[[3]](diffhunk://#diff-bb7f09f590ccabb456565d52afd66c1421525ddb1b6b65c0985aaab5a3c20ae7R464-R471)
* Implemented helper methods `_delete_nested_key` (for deleting nested
keys and cleaning up empty branches) and `get_unused_keys` (for
identifying unused keys) in the translation merger logic.
[[1]](diffhunk://#diff-bb7f09f590ccabb456565d52afd66c1421525ddb1b6b65c0985aaab5a3c20ae7R117-R139)
[[2]](diffhunk://#diff-bb7f09f590ccabb456565d52afd66c1421525ddb1b6b65c0985aaab5a3c20ae7R156-R166)
**Documentation Updates**
* Updated `README.md` to document the new `remove-unused` command and
describe its purpose and usage.
[[1]](diffhunk://#diff-aeee54608ec45b06f4d52a4afcfbc7e6b08dee75f4328207cec32b8ca02fe0c6R185-R187)
[[2]](diffhunk://#diff-aeee54608ec45b06f4d52a4afcfbc7e6b08dee75f4328207cec32b8ca02fe0c6R196)
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
This pull request adds support for converting eBook formats (EPUB, MOBI,
AZW3, FB2) to PDF, including a new set of user-configurable options for
the conversion process. It introduces frontend UI components, updates
configuration and constants, and ensures that the backend can recognize
and handle these new formats and options.
**eBook to PDF Conversion Support**
- Added support for converting eBook formats (`epub`, `mobi`, `azw3`,
`fb2`) to PDF, including updates to conversion endpoints, extension
mappings, and conversion matrices in `convertConstants.ts` to route
these conversions through the new `ebook-to-pdf` endpoint.
- Updated the file processing logic so that eBook-to-PDF conversions are
processed separately for each file, similar to web file conversions.
**Frontend: User Options for eBook Conversion**
- Added a new UI component `ConvertFromEbookSettings.tsx` that allows
users to configure options for eBook-to-PDF conversion: embedding all
fonts, including a table of contents, adding page numbers, and
optimizing for eBook readers. This component is conditionally rendered
in the conversion settings when an eBook format is selected as the
source and PDF as the target.
- Integrated the new eBook options into the conversion parameters and
ensured they are initialized/reset appropriately in the conversion
settings.
**Form Data and Backend Integration**
- Modified the form data builder to append the new eBook options to the
request payload when performing eBook-to-PDF conversions, ensuring these
settings are sent to the backend.
**Localization and Configuration**
- Added localization strings for all new eBook conversion options in the
English translation file, providing user-friendly labels and
descriptions in the UI.
- Updated backend configuration logic to recognize `Calibre` and
`FFmpeg` as tool groups, ensuring correct enablement/disablement
behavior for these tools.
<img width="366" height="997" alt="image"
src="https://github.com/user-attachments/assets/44d3308c-ea49-4874-8f5e-c7d617a37489"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
This pull request adds an auto-crop feature to the PDF crop tool,
allowing users to automatically crop whitespace from PDFs. The UI now
includes an "Auto-crop whitespace" checkbox, and when enabled, manual
crop controls are hidden. The crop operation logic and form data
submission have been updated to support this new option.
**Auto-crop Feature Implementation**
* Added an `autoCrop` boolean parameter to the `CropParameters`
interface and set its default value to `false` in
`useCropParameters.ts`.
* Updated the crop operation logic in `useCropOperation.ts` to include
the `autoCrop` parameter in the form data and only send manual crop
coordinates if `autoCrop` is disabled.
**User Interface Updates**
* Added an "Auto-crop whitespace" checkbox to the crop settings UI in
`CropSettings.tsx`, which toggles the auto-crop feature
* Modified the crop settings UI to hide manual crop controls and
validation alerts when auto-crop is enabled
**Localization**
* Added a new translation string for "Auto-crop whitespace" in the
English locale file `translation.toml`.
<img width="363" height="998" alt="image"
src="https://github.com/user-attachments/assets/a92988b8-eea0-47e7-961f-b4a6e018ff2f"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
This pull request adds support for specifying a custom rendering DPI for
PDF flattening, allowing users to control the output sharpness and file
size. The changes update the UI to include a new DPI input (when
appropriate), extend parameter handling, and ensure the DPI value is
passed to the backend if provided.
**User interface enhancements:**
* Added a `NumberInput` field in `FlattenSettings.tsx` for users to
specify the rendering DPI, shown only when "Flatten only forms" is not
selected. The input includes label, help text, placeholder, and value
constraints.
* Updated the English locale file to add translation strings for the
rendering DPI input label, help text, and placeholder.
**Parameter and data handling:**
* Extended the `FlattenParameters` interface and default parameters to
include an optional `renderDpi` property.
* Modified the form data builder in `useFlattenOperation.ts` to append
the `renderDpi` value to the request if specified.
* Imported `NumberInput` from the Mantine UI library to support the new
DPI input field in the settings component.
<img width="363" height="998" alt="image"
src="https://github.com/user-attachments/assets/9a59f379-f1d3-4827-8a9c-f34c0bfcfada"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Co-authored-by: Anthony Stirling <77850077+Frooodle@users.noreply.github.com>
[//]: # (dependabot-start)
⚠️ **Dependabot is rebasing this PR** ⚠️
Rebasing might not happen immediately, so don't worry if this takes some
time.
Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.
---
[//]: # (dependabot-end)
Bumps `imageioVersion` from 3.12.0 to 3.13.0.
Updates `com.twelvemonkeys.imageio:imageio-batik` from 3.12.0 to 3.13.0
Updates `com.twelvemonkeys.imageio:imageio-bmp` from 3.12.0 to 3.13.0
Updates `com.twelvemonkeys.imageio:imageio-jpeg` from 3.12.0 to 3.13.0
Updates `com.twelvemonkeys.imageio:imageio-tiff` from 3.12.0 to 3.13.0
Updates `com.twelvemonkeys.imageio:imageio-webp` from 3.12.0 to 3.13.0
Updates `com.twelvemonkeys.imageio:imageio-psd` from 3.12.0 to 3.13.0
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps `logback` from 1.5.22 to 1.5.23.
Updates `ch.qos.logback:logback-core` from 1.5.22 to 1.5.23
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/qos-ch/logback/releases">ch.qos.logback:logback-core's
releases</a>.</em></p>
<blockquote>
<h2>Logback 1.5.23</h2>
<p><strong>2025-12-21 Release of logback version 1.5.23</strong></p>
<p>• In response to <a
href="https://redirect.github.com/qos-ch/logback/issues/959">issues/959</a>
file name collisions are detected at configuration time by analyzing the
configuration file and no longer at run time. This avoids the
<code>ConcurrentModificationException</code> reported in the issue.</p>
<p>• ZIP and XZ compression now use a <code>BufferedOutputStream</code>
when writing to the compressed file. This issue was reported in <a
href="https://redirect.github.com/qos-ch/logback/issues/988">issues/988</a>.</p>
<p>• A bit-wise identical binary of this version can be reproduced by
building from source code at commit
0bcc3feb54a6d99caac70969ee5f8334aad1fbaf associated with the tag
v_1.5.23. Release built using Java "21" 2023-10-17 LTS build
21.0.1.+12-LTS-29 under Linux Debian 11.6.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/qos-ch/logback/commit/0bcc3feb54a6d99caac70969ee5f8334aad1fbaf"><code>0bcc3fe</code></a>
prepare release 1.5.23</li>
<li><a
href="https://github.com/qos-ch/logback/commit/4627dbd618cbb2365a09c8013ec3fc00d349743e"><code>4627dbd</code></a>
better to use BufferedOutputStream during ZIP and XZ compression,
especially ...</li>
<li><a
href="https://github.com/qos-ch/logback/commit/299f091d3211ad38869aadadbf7b2f66f231ad52"><code>299f091</code></a>
add collision test in presence of conditional processing</li>
<li><a
href="https://github.com/qos-ch/logback/commit/b446f3f06188f4041cea827832ffb8a90fb07241"><code>b446f3f</code></a>
In Context, remove collision map</li>
<li><a
href="https://github.com/qos-ch/logback/commit/a3eb14df4886ce8c398f6486b22ea77ad45ba9af"><code>a3eb14d</code></a>
in response to issues/959, collision detection is now done by
FileCollisionAn...</li>
<li><a
href="https://github.com/qos-ch/logback/commit/681b2be7e11dc46f883ead7ed4603dbad92812ae"><code>681b2be</code></a>
remove unused method, minor comment edits</li>
<li><a
href="https://github.com/qos-ch/logback/commit/17a3edfccc6021cfdd6f0ff52bfd2ae8bcc2c393"><code>17a3edf</code></a>
start work on 1.5.23-SNAPSHOT</li>
<li>See full diff in <a
href="https://github.com/qos-ch/logback/compare/v_1.5.22...v_1.5.23">compare
view</a></li>
</ul>
</details>
<br />
Updates `ch.qos.logback:logback-classic` from 1.5.22 to 1.5.23
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/qos-ch/logback/releases">ch.qos.logback:logback-classic's
releases</a>.</em></p>
<blockquote>
<h2>Logback 1.5.23</h2>
<p><strong>2025-12-21 Release of logback version 1.5.23</strong></p>
<p>• In response to <a
href="https://redirect.github.com/qos-ch/logback/issues/959">issues/959</a>
file name collisions are detected at configuration time by analyzing the
configuration file and no longer at run time. This avoids the
<code>ConcurrentModificationException</code> reported in the issue.</p>
<p>• ZIP and XZ compression now use a <code>BufferedOutputStream</code>
when writing to the compressed file. This issue was reported in <a
href="https://redirect.github.com/qos-ch/logback/issues/988">issues/988</a>.</p>
<p>• A bit-wise identical binary of this version can be reproduced by
building from source code at commit
0bcc3feb54a6d99caac70969ee5f8334aad1fbaf associated with the tag
v_1.5.23. Release built using Java "21" 2023-10-17 LTS build
21.0.1.+12-LTS-29 under Linux Debian 11.6.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/qos-ch/logback/commit/0bcc3feb54a6d99caac70969ee5f8334aad1fbaf"><code>0bcc3fe</code></a>
prepare release 1.5.23</li>
<li><a
href="https://github.com/qos-ch/logback/commit/4627dbd618cbb2365a09c8013ec3fc00d349743e"><code>4627dbd</code></a>
better to use BufferedOutputStream during ZIP and XZ compression,
especially ...</li>
<li><a
href="https://github.com/qos-ch/logback/commit/299f091d3211ad38869aadadbf7b2f66f231ad52"><code>299f091</code></a>
add collision test in presence of conditional processing</li>
<li><a
href="https://github.com/qos-ch/logback/commit/b446f3f06188f4041cea827832ffb8a90fb07241"><code>b446f3f</code></a>
In Context, remove collision map</li>
<li><a
href="https://github.com/qos-ch/logback/commit/a3eb14df4886ce8c398f6486b22ea77ad45ba9af"><code>a3eb14d</code></a>
in response to issues/959, collision detection is now done by
FileCollisionAn...</li>
<li><a
href="https://github.com/qos-ch/logback/commit/681b2be7e11dc46f883ead7ed4603dbad92812ae"><code>681b2be</code></a>
remove unused method, minor comment edits</li>
<li><a
href="https://github.com/qos-ch/logback/commit/17a3edfccc6021cfdd6f0ff52bfd2ae8bcc2c393"><code>17a3edf</code></a>
start work on 1.5.23-SNAPSHOT</li>
<li>See full diff in <a
href="https://github.com/qos-ch/logback/compare/v_1.5.22...v_1.5.23">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Added an optional flag in settings.yml to hide the settings button in no
login servers. When hidden, users can no longer:
- Open the Settings modal at all (gear button is hidden)
- Change General preferences (tool picker mode, hide unavailable
tools/conversions, auto‑unzip and file limit)
- Configure keyboard shortcuts (Hotkeys / Keyboard Shortcuts section)
- Use the in‑app update checker UI (see current/latest version, check
for updates, view update details)
- Note: When enableLogin === true, the flag is ignored and the Settings
button remains visible.
---------
Co-authored-by: Anthony Stirling <77850077+Frooodle@users.noreply.github.com>
Co-authored-by: Reece Browne <74901996+reecebrowne@users.noreply.github.com>
# Description of Changes
- Implemented `PDFVerificationRequest` and `PDFVerificationResult`
models for validation requests and responses
- Developed `VeraPDFService` to validate PDFs against specific or
auto-detected standards
- Added `VerifyPDFController` with an endpoint for PDF verification
- Integrated veraPDF dependencies into project build file
- Deprecated unused `/verify-pdf` form in `SecurityWebController`
- Updated `EndpointConfiguration` to include the new `verify-pdf`
endpoint
This PR introduces a PDF standards verification feature to Stirling-PDF,
powered by the industry-standard veraPDF validation library. This
feature enables users to validate PDF files against multiple PDF
standards including PDF/A (archival), PDF/UA (accessibility), and WTPDF
standards.
### 1. PDF Standards Verification Endpoint
- New API Endpoint: `/api/v1/security/verify-pdf`
- Validates PDF files against multiple standards:
- PDF/A (1b, 2a, 2b, 2u, 3a, 3b, 3u, 4, 4e, 4f) - Archival standards
- PDF/UA-1 and PDF/UA-2 - Universal Accessibility standards
- WTPDF - Well-Tagged PDF standards
- Auto-detection: Automatically detects and validates all standards
declared in the PDF's XMP metadata
### 2. Validation Results
The verification returns detailed JSON results including:
- Compliance status: Whether the PDF meets the standard requirements
- Declared vs validated standards: Shows what the PDF claims to be vs
what it actually is
- Categorized issues:
- Errors: Critical compliance failures that prevent certification
- Warnings: Non-critical issues and recommendations
- Detailed issue information:
- Rule IDs from the specification
- Descriptive error messages
- Location within the PDF where the issue occurs
- Specification references (clause numbers, test numbers)
### 3. Detect Issue Classification
Implements intelligent classification of validation issues:
- Errors: Issues that prevent standard compliance (font problems, color
space issues, structural problems)
- Warnings: Recommended but not required elements (metadata
recommendations, optional features)
- Classification based on:
- Rule ID patterns
- Clause number prefixes
- Message content analysis
### New Files Added
#### Controllers
- VerifyPDFController.java: REST API controller handling PDF
verification requests
- Handles multipart file uploads
- Supports both single-standard and auto-detection modes
- Comprehensive error handling for encrypted PDFs, parsing errors, and
validation failures
#### Models
- PDFVerificationRequest.java: Request model for verification API
- Extends standard PDFFile model
- Optional `standard` parameter for manual standard selection
- PDFVerificationResult.java: Response model containing validation
results
- Includes standard information and validation profile details
- Separate lists for errors and warnings
- Nested `ValidationIssue` class for detailed issue reporting
#### Services
- VeraPDFService.java: Core service implementing veraPDF integration
- Initializes veraPDF Greenfield engine
- Extracts declared PDF/A standards from XMP metadata
- Performs validation against specified or detected standards
- Converts veraPDF results to application-specific format
- Implements smart issue classification logic
### Endpoint Configuration Updates
#### EndpointConfiguration.java
- Added `verify-pdf` to the Security group
- Added `verify-pdf` to the Java group (no external tools required)
- Created new veraPDF dependency group for endpoint availability
tracking
- Updated `isToolGroup()` method to recognize veraPDF as a tool
dependency
### Supported Standards
#### PDF/A (Archival)
- PDF/A-1 (a, b): ISO 19005-1:2005
- PDF/A-2 (a, b, u): ISO 19005-2:2011
- PDF/A-3 (a, b, u): ISO 19005-3:2012
- PDF/A-4 (standard, e, f): ISO 19005-4:2020
#### PDF/UA (Universal Accessibility)
- PDF/UA-1: ISO 14289-1:2014
- PDF/UA-2: ISO 14289-2 (latest)
#### WTPDF (Well-Tagged PDF)
- WTPDF 1.0: Tagged PDF for accessibility and structure
### Security Considerations
The following test scenarios should be validated:
1. Valid PDF/A documents (should return compliant)
2. Non-compliant PDF/A documents (should return errors)
3. PDFs without PDF/A declaration (should detect and report)
4. PDF/UA documents (should validate accessibility)
5. Encrypted PDFs (should return appropriate error)
6. Mixed standards (PDF/A + PDF/UA) (should validate both)
7. Empty standard parameter (should auto-detect)
8. Invalid standard parameter (should return error)
### API Usage Examples
```bash
curl -X POST http://localhost:8080/api/v1/security/verify-pdf \
-F "fileInput=@document.pdf"
```
### Example Response
```json
[
{
"standard": "3b",
"standardName": "PDF/A-ISO 19005-3:2012B compliant",
"validationProfile": "3b",
"validationProfileName": "PDF/A-ISO 19005-3:2012B",
"complianceSummary": "PDF/A-ISO 19005-3:2012B compliant",
"declaredPdfa": true,
"compliant": true,
"totalFailures": 0,
"totalWarnings": 0,
"failures": [],
"warnings": []
}
]
```
```json
[
{
"standard": "2b",
"standardName": "PDF/A-ISO 19005-2:2011B with errors",
"validationProfile": "2b",
"validationProfileName": "PDF/A-ISO 19005-2:2011B",
"complianceSummary": "PDF/A-ISO 19005-2:2011B with errors",
"declaredPdfa": true,
"compliant": false,
"totalFailures": 2,
"totalWarnings": 0,
"failures": [
{
"ruleId": "RuleId [specification=ISO 19005-2:2011, clause=6.2.11.4.1, testNumber=1]",
"message": "The font programs for all fonts used for rendering within a conforming file shall be embedded within that file, as defined in ISO 32000-1:2008, 9.9",
"location": "Location [level=CosDocument, context=root/document[0]/pages[0](3 0 obj PDPage)/contentStream[0](105 0 obj PDContentStream)/operators[60]/font[0](ArialMT)]",
"specification": "ISO 19005-2:2011",
"clause": "6.2.11.4.1",
"testNumber": "1"
},
{
"ruleId": "RuleId [specification=ISO 19005-2:2011, clause=6.3.2, testNumber=1]",
"message": "Except for annotation dictionaries whose Subtype value is Popup, all annotation dictionaries shall contain the F key",
"location": "Location [level=CosDocument, context=root/document[0]/pages[0](3 0 obj PDPage)/annots[4](107 0 obj PDLinkAnnot)]",
"specification": "ISO 19005-2:2011",
"clause": "6.3.2",
"testNumber": "1"
}
],
"warnings": []
}
]
```
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
This pull request adds support for invalidating digital signatures
during the OCR process, allowing users to process signed PDFs with OCR
at the cost of breaking their digital signatures. The feature is
integrated across the backend, frontend, and user interface, including
appropriate warnings to inform users of the consequences.
**Backend support for digital signature invalidation:**
- Added a new `invalidateDigitalSignatures` boolean field to the
`ProcessPdfWithOcrRequest` model, and updated the `OCRController` to
accept, pass, and handle this parameter. If enabled, the backend adds
the `--invalidate-digital-signatures` flag to the OCR command,
invalidating any digital signatures present in the PDF.
**Frontend and UI integration:**
- Added an "Invalidate digital signatures" option to the advanced OCR
settings in the UI, including a warning tooltip to inform users that
enabling this option will make the document's digital signatures
invalid.
- Updated the OCR form data builder to include the
`invalidateDigitalSignatures` parameter when submitting OCR requests.
**Localization and tooltips:**
- Added new translation strings and warning messages for the "Invalidate
digital signatures" option and its tooltip, ensuring users are clearly
informed about the consequences of enabling this feature.
<img width="649" height="994" alt="image"
src="https://github.com/user-attachments/assets/8d7f42cb-fc9e-4864-ad09-09ccb56347a1"
/>
Closes: #5142
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
# Description of Changes
This pull request enhances the display of PDF metadata in the "Other"
and "Per Page" sections by introducing more detailed and user-friendly
rendering of attachments, embedded files, and images. The changes add
new helper functions for rendering these lists and extend the type
definitions to support richer information, improving the clarity and
usefulness of the UI.
**Improvements to PDF metadata rendering:**
* Added `renderAttachmentsList` and `renderEmbeddedFilesList` helper
functions in `OtherSection.tsx` to display detailed information about
attachments and embedded files, including name, description, file size,
MIME type, and dates. These replace the generic list renderer for these
fields.
* Added `renderImagesList` helper function in `PerPageSection.tsx` to
display images with their name, dimensions, and color space, replacing
the generic list renderer for images.
**Type definition enhancements:**
* Extended `PdfEmbeddedFileInfo` and `PdfAttachmentInfo` in
`getPdfInfo.ts` to include additional fields: `FileSize`, `MimeType`,
`CreationDate`, and `ModificationDate` for embedded files, and
`FileSize` for attachments.
<img width="1920" height="998" alt="image"
src="https://github.com/user-attachments/assets/249409c1-4fd5-4599-b8f9-07093034cb55"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
# Description of Changes
This pull request adds a new "Split Mode" feature to the "Split by
Sections" tool, allowing users to customize how pages are split,
including options to exclude the first/last pages or specify custom
pages. The changes include updates to the UI, form data handling,
parameter definitions, and validation logic to support these new
options.
**Split by Sections: New Split Mode Feature**
*UI Enhancements:*
- Added a `Radio.Group` in `SplitSettings.tsx` to let users choose the
split mode (split all, exclude first/last, or custom pages), and a
conditional `TextInput` for custom page numbers when "Custom" is
selected.
*Localization:*
- Updated `translation.toml` with new labels and descriptions for the
split mode options and custom page numbers.
*Parameter Handling:*
- Extended the `SplitParameters` interface to include `splitMode` and
`customPages`, and set their default values.
*Form Submission:*
- Modified `buildSplitFormData` to include the selected split mode and
custom page numbers (if applicable) in the form data sent to the
backend.
*Validation Logic:*
- Updated the validation logic in `useSplitParameters` to require custom
page numbers when the custom split mode is selected.
<img width="363" height="998" alt="image"
src="https://github.com/user-attachments/assets/c9f781a6-cf7e-4f3d-8514-57cfe468e0c8"
/>
<!--
Please provide a summary of the changes, including:
- What was changed
- Why the change was made
- Any challenges encountered
Closes #(issue_number)
-->
---
## Checklist
### General
- [X] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [X] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [X] I have performed a self-review of my own code
- [X] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [X] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [X] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
---------
Signed-off-by: Balázs Szücs <bszucs1209@gmail.com>
[//]: # (dependabot-start)
⚠️ **Dependabot is rebasing this PR** ⚠️
Rebasing might not happen immediately, so don't worry if this takes some
time.
Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.
---
[//]: # (dependabot-end)
Bumps
[com.squareup.okhttp3:okhttp-bom](https://github.com/square/okhttp) from
5.3.1 to 5.3.2.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/square/okhttp/blob/master/CHANGELOG.md">com.squareup.okhttp3:okhttp-bom's
changelog</a>.</em></p>
<blockquote>
<h2>Version 5.3.2</h2>
<p><em>2025-11-18</em></p>
<ul>
<li>
<p>Fix: Don't delay triggering timeouts. In Okio 3.16.0 we introduced a
regression that caused
timeouts to fire later than they were supposed to.</p>
</li>
<li>
<p>Upgrade: [Okio 3.16.4][okio_3_16_4].</p>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/square/okhttp/commit/75b9c267744cdd2e8b222d247052748ff0954304"><code>75b9c26</code></a>
Prepare for release 5.3.2.</li>
<li><a
href="https://github.com/square/okhttp/commit/ab48e5d86d0c0b16b3679b9b9522acf65db73da4"><code>ab48e5d</code></a>
Okio 3.16.4 (<a
href="https://redirect.github.com/square/okhttp/issues/9200">#9200</a>)</li>
<li><a
href="https://github.com/square/okhttp/commit/a9a4638b3d38b83782a959514b4183ddea0f071f"><code>a9a4638</code></a>
Prepare next development version.</li>
<li>See full diff in <a
href="https://github.com/square/okhttp/compare/parent-5.3.1...parent-5.3.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps `bouncycastleVersion` from 1.82 to 1.83.
Updates `org.bouncycastle:bcprov-jdk18on` from 1.82 to 1.83
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/bcgit/bc-java/blob/main/docs/releasenotes.html">org.bouncycastle:bcprov-jdk18on's
changelog</a>.</em></p>
<blockquote>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<p><!-- raw HTML omitted --><!-- raw HTML omitted -->2.1.1 Version<!--
raw HTML omitted --><!-- raw HTML omitted -->
Release: 1.83<!-- raw HTML omitted -->
Date: 2025, November 27th.</p>
<!-- raw HTML omitted -->
<p><!-- raw HTML omitted --><!-- raw HTML omitted -->2.2.1 Version<!--
raw HTML omitted --><!-- raw HTML omitted -->
Release: 1.82<!-- raw HTML omitted -->
Date: 2025, 17th September.</p>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/bcgit/bc-java/commits">compare view</a></li>
</ul>
</details>
<br />
Updates `org.bouncycastle:bcpkix-jdk18on` from 1.82 to 1.83
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/bcgit/bc-java/blob/main/docs/releasenotes.html">org.bouncycastle:bcpkix-jdk18on's
changelog</a>.</em></p>
<blockquote>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<p><!-- raw HTML omitted --><!-- raw HTML omitted -->2.1.1 Version<!--
raw HTML omitted --><!-- raw HTML omitted -->
Release: 1.83<!-- raw HTML omitted -->
Date: 2025, November 27th.</p>
<!-- raw HTML omitted -->
<p><!-- raw HTML omitted --><!-- raw HTML omitted -->2.2.1 Version<!--
raw HTML omitted --><!-- raw HTML omitted -->
Release: 1.82<!-- raw HTML omitted -->
Date: 2025, 17th September.</p>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/bcgit/bc-java/commits">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps `logback` from 1.5.21 to 1.5.22.
Updates `ch.qos.logback:logback-core` from 1.5.21 to 1.5.22
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/qos-ch/logback/releases">ch.qos.logback:logback-core's
releases</a>.</em></p>
<blockquote>
<h2>Logback 1.5.22</h2>
<p><strong>2025-12-11 Release of logback version 1.5.22</strong></p>
<p>• In order to prevent involuntary information leakage, Logback will
no longer output the value of a substituted variable, if the variable
name contains any of the case-insensitive strings "password",
"secret" or "confidential". This problem was
reported by Chintan Rohila in <a
href="https://redirect.github.com/qos-ch/logback/issues/986">issues/986</a>.</p>
<p>• Logback now takes the overridden <code>toString()</code> method of
<code>Throwable</code> subclasses into account when printing stack
traces. This issue was reported in <a
href="https://jira.qos.ch/browse/LOGBACK-543">LOGBACK-543</a> by Alvin
Chee, with a fix provided in <a
href="https://redirect.github.com/qos-ch/logback/pull/404">PR 404</a> by
Brett Kail.</p>
<p>• Instead of limit-counting guard, Logback now uses a tumbling-window
guard to rate limit internal error messages.</p>
<p>• A bit-wise identical binary of this version can be reproduced by
building from source code at commit
572379aabd2f672b49593e4020696c624541e5b0 associated with the tag
v_1.5.22. Release built using Java "21" 2023-10-17 LTS build
21.0.1.+12-LTS-29 under Linux Debian 11.6.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/qos-ch/logback/commit/572379aabd2f672b49593e4020696c624541e5b0"><code>572379a</code></a>
prepare release 1.5.22</li>
<li><a
href="https://github.com/qos-ch/logback/commit/39d17ea3b3381d08b181c300e27ca0713ffc20b8"><code>39d17ea</code></a>
fix status printing of variable substitution when the variable name
contains ...</li>
<li><a
href="https://github.com/qos-ch/logback/commit/75509a918665cc16a8d35ee4024be03e17c7147a"><code>75509a9</code></a>
fix PR 404, LOGBACK-543</li>
<li><a
href="https://github.com/qos-ch/logback/commit/8eb93569728ab33c50b963d42ea9fcd4269c502f"><code>8eb9356</code></a>
remove unused import</li>
<li><a
href="https://github.com/qos-ch/logback/commit/6131a3ad0af65a72df2e78d56424d9ac0fed8935"><code>6131a3a</code></a>
use a slightly more sophisticated guard for printing status
messages</li>
<li><a
href="https://github.com/qos-ch/logback/commit/9efca21c6e07feefa2a6ffb6b9b3807f357515e8"><code>9efca21</code></a>
add no-args constructor to support various serialization frameworks</li>
<li><a
href="https://github.com/qos-ch/logback/commit/1bea5804f8329a7e49a4197e34cc297ad46a597c"><code>1bea580</code></a>
minor comment edits</li>
<li><a
href="https://github.com/qos-ch/logback/commit/bd07fddf12b8b74d28d313a56e7357f6202d2449"><code>bd07fdd</code></a>
update angus, greenmail versions</li>
<li><a
href="https://github.com/qos-ch/logback/commit/aef993c64b4a7119f9e831fd4acaa7e470e267ca"><code>aef993c</code></a>
start work on 1.5.22-SNAPSHOT</li>
<li>See full diff in <a
href="https://github.com/qos-ch/logback/compare/v_1.5.21...v_1.5.22">compare
view</a></li>
</ul>
</details>
<br />
Updates `ch.qos.logback:logback-classic` from 1.5.21 to 1.5.22
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/qos-ch/logback/releases">ch.qos.logback:logback-classic's
releases</a>.</em></p>
<blockquote>
<h2>Logback 1.5.22</h2>
<p><strong>2025-12-11 Release of logback version 1.5.22</strong></p>
<p>• In order to prevent involuntary information leakage, Logback will
no longer output the value of a substituted variable, if the variable
name contains any of the case-insensitive strings "password",
"secret" or "confidential". This problem was
reported by Chintan Rohila in <a
href="https://redirect.github.com/qos-ch/logback/issues/986">issues/986</a>.</p>
<p>• Logback now takes the overridden <code>toString()</code> method of
<code>Throwable</code> subclasses into account when printing stack
traces. This issue was reported in <a
href="https://jira.qos.ch/browse/LOGBACK-543">LOGBACK-543</a> by Alvin
Chee, with a fix provided in <a
href="https://redirect.github.com/qos-ch/logback/pull/404">PR 404</a> by
Brett Kail.</p>
<p>• Instead of limit-counting guard, Logback now uses a tumbling-window
guard to rate limit internal error messages.</p>
<p>• A bit-wise identical binary of this version can be reproduced by
building from source code at commit
572379aabd2f672b49593e4020696c624541e5b0 associated with the tag
v_1.5.22. Release built using Java "21" 2023-10-17 LTS build
21.0.1.+12-LTS-29 under Linux Debian 11.6.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/qos-ch/logback/commit/572379aabd2f672b49593e4020696c624541e5b0"><code>572379a</code></a>
prepare release 1.5.22</li>
<li><a
href="https://github.com/qos-ch/logback/commit/39d17ea3b3381d08b181c300e27ca0713ffc20b8"><code>39d17ea</code></a>
fix status printing of variable substitution when the variable name
contains ...</li>
<li><a
href="https://github.com/qos-ch/logback/commit/75509a918665cc16a8d35ee4024be03e17c7147a"><code>75509a9</code></a>
fix PR 404, LOGBACK-543</li>
<li><a
href="https://github.com/qos-ch/logback/commit/8eb93569728ab33c50b963d42ea9fcd4269c502f"><code>8eb9356</code></a>
remove unused import</li>
<li><a
href="https://github.com/qos-ch/logback/commit/6131a3ad0af65a72df2e78d56424d9ac0fed8935"><code>6131a3a</code></a>
use a slightly more sophisticated guard for printing status
messages</li>
<li><a
href="https://github.com/qos-ch/logback/commit/9efca21c6e07feefa2a6ffb6b9b3807f357515e8"><code>9efca21</code></a>
add no-args constructor to support various serialization frameworks</li>
<li><a
href="https://github.com/qos-ch/logback/commit/1bea5804f8329a7e49a4197e34cc297ad46a597c"><code>1bea580</code></a>
minor comment edits</li>
<li><a
href="https://github.com/qos-ch/logback/commit/bd07fddf12b8b74d28d313a56e7357f6202d2449"><code>bd07fdd</code></a>
update angus, greenmail versions</li>
<li><a
href="https://github.com/qos-ch/logback/commit/aef993c64b4a7119f9e831fd4acaa7e470e267ca"><code>aef993c</code></a>
start work on 1.5.22-SNAPSHOT</li>
<li>See full diff in <a
href="https://github.com/qos-ch/logback/compare/v_1.5.21...v_1.5.22">compare
view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description of Changes
This pull request improves the handling of provider settings in the
`ProviderCard` component to ensure settings are always in sync with the
latest values from `settings.yml`, and enhances how default values are
initialized for provider fields. It also updates the usage of
`ProviderCard` in the admin connections section to explicitly pass
provider settings.
**Provider settings synchronization and initialization:**
* Added a `useEffect` in `ProviderCard` to keep `localSettings` in sync
with incoming `settings` prop, ensuring that changes from `settings.yml`
are reflected in the UI.
* Improved default value initialization in `ProviderCard`: when opening
an unconfigured provider, it now merges defaults with any existing
values from `settings.yml`, rather than overwriting them.
**Integration with AdminConnectionsSection:**
* Updated `AdminConnectionsSection` to explicitly pass provider settings
to `ProviderCard` via the `settings` prop, ensuring the component always
receives the correct configuration.
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
Show uneditable annotations on viewer
show editable annotations layer when in annotation tools (sign, add
image, add text)
Remove draw tool from viewer (this is replaced wholesale in an upcoming
PR so it wasn't worth doing the work to ensure it worked with the new
annotation layer set up_)
refactoring work, mostly renaming variables we can use for all
annotation based tools that had sign specific names.
remove "tools" tooltip
---------
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
## Summary
- hide password and username update controls for SSO accounts and show a
managed-account notice
- prevent account update handlers from calling APIs when the user
authenticates via SSO
- expose authenticationType on the user session model and add
translations for new SSO messaging
## Testing
- not run (not requested)
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_693ae8144148832888ecf128e66cd3ca)
## Summary
- introduce a shared line art conversion interface and proprietary
ImageMagick-backed implementation
- have the compress controller optionally autowire the enterprise
service before running per-image line art processing
- remove ImageMagick command details from core by delegating conversions
through the proprietary service
## Testing
- not run (not requested)
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_6928aecceaf083289a9269b1ca99307e)
---------
Co-authored-by: James Brunton <jbrunton96@gmail.com>
Also added `enableDesktopInstallSlide` flag in `settings.yml` to hide
the download for desktop page in the onboarding.
---------
Co-authored-by: James Brunton <james@stirlingpdf.com>
## Summary
- validate required certificate inputs before loading keystores to
prevent null dereferences
- surface clear errors for missing PEM, PKCS12/PFX, and JKS uploads
during PDF signing
- add a unit test covering the missing PKCS12/PFX keystore scenario
## Testing
- ./gradlew :stirling-pdf:test --tests
stirling.software.SPDF.controller.api.security.CertSignControllerTest
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_6934c8803d648328bf76b72a4f689c60)
# Description of Changes
Fix#5206
Required splitting out the logic for the text with font entry so that
the labels are configurable from the call-site instead of all using the
same ones for Sign.
# Description of Changes
- **What was changed**
- Added `groovy.json.JsonOutput` and `groovy.json.JsonSlurper` imports
to `build.gradle`.
- Introduced a reusable `writeIfChanged(File targetFile, String
newContent)` helper to avoid unnecessary file writes when content is
unchanged.
- Added `updateTauriConfigVersion(String version)` to:
- Parse `frontend/src-tauri/tauri.conf.json`.
- Set the `version` field from `project.version`.
- Re-write the file as pretty-printed JSON (with a trailing line
separator) only if content actually changed.
- Added `updateSimulationVersion(File fileToUpdate, String version)` to:
- Locate the `appVersion: '<value>'` assignment via regex in simulation
files.
- Replace the existing version with `project.version`.
- Fail the build with a clear `GradleException` if `appVersion` cannot
be found.
- Registered a new Gradle task `syncAppVersion` (group: `versioning`)
which:
- Reads `project.version` as the canonical app version.
- Updates `frontend/src-tauri/tauri.conf.json`.
- Updates `frontend/src/core/testing/serverExperienceSimulations.ts`.
- Updates
`frontend/src/proprietary/testing/serverExperienceSimulations.ts`.
- Updated the main `build` task so it now depends on `syncAppVersion` in
addition to `:stirling-pdf:bootJar` and `buildRestartHelper`.
- **Why the change was made**
- To ensure the desktop Tauri configuration and server experience
simulation configs consistently use the same application version as
defined in `project.version`.
- To remove manual version bumps in multiple files and eliminate the
risk of version mismatches between backend, desktop app, and
simulation/testing tooling.
- To minimize noise in commits and CI by only touching versioned files
when their content actually changes (using `writeIfChanged`).
---
## Checklist
### General
- [ ] I have read the [Contribution
Guidelines](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/CONTRIBUTING.md)
- [ ] I have read the [Stirling-PDF Developer
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md)
(if applicable)
- [ ] I have read the [How to add new languages to
Stirling-PDF](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md)
(if applicable)
- [ ] I have performed a self-review of my own code
- [ ] My changes generate no new warnings
### Documentation
- [ ] I have updated relevant docs on [Stirling-PDF's doc
repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/)
(if functionality has heavily changed)
- [ ] I have read the section [Add New Translation
Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags)
(for new translation tags only)
### Translations (if applicable)
- [ ] I ran
[`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached
(e.g., as comments or direct attachments in the PR)
### Testing (if applicable)
- [ ] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
Fix#5189.
Fix Mac app not being able to open files with spaces in their name,
which was happening because the URL was not being decoded on input.
Users logging in via OAuth2 were redirected to Spring's default login
form instead of the React frontend login page. This happened because the
OAuth2 configuration used `.loginPage("/oauth2")` which pointed to the
old Thymeleaf template.
### Testing (if applicable)
- [x] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
# Description of Changes
Currently, the Quick Access Bar only renders well in Chrome. It's got
all sorts of layout issues in Firefox and Safari. This PR attempts to
retain the recent changes to make the bar thinner etc. but make it work
better in all browsers.
# Description of Changes
Add lite mode for CI which just runs the most important jobs for
deployment. This won't be used in this repo, but allows other repos
containing Stirling to easily disable jobs like desktop builds etc. if
they're unnecessary, without needing to deal with conflicts in the
files. They'll just need to set the repo variable `CI_PROFILE` to
`lite`. We have an upstream repo that we'd like these changes for.
Fixes for /swagger-ui/index.html & /v1/api-docs endpoints not being
accessible when login was enabled.
- `UserAuthenticationFilter.isPublicAuthEndpoint()` had gaps in its
check, missing `/v1/api-docs`
- Refactored `UserAuthenticationFilter` to use
`RequestUriUtils.isPublicAuthEndpoint()` instead of its own incorrect
method
Closes#5125 & #5028
---
### Testing (if applicable)
- [x] I have tested my changes locally. Refer to the [Testing
Guide](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/DeveloperGuide.md#6-testing)
for more details.
## Summary
- restrict supported languages to the validated list from app-config
instead of always adding an extra fallback
- set the effective fallback locale to the preferred configured language
and switch away from disallowed selections automatically
## Testing
- ./gradlew build
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_6930529bc6c08328a1ce05f7d1316e27)
## Summary
- track IME composition state in the PDF text editor to avoid
interrupting phonetic input methods
- update text syncing to occur after composition completes and skip
redundant updates mid-composition
## Testing
- npm run lint -- --max-warnings 0
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_693744be74148328bd3bda9150de6e56)
## Summary
- add optional STARTTLS and SSL-related fields to mail settings with
defaults matching prior behavior
- apply the new mail properties in the SMTP JavaMail configuration,
including trust and hostname verification overrides
- update mail settings template and tests to cover default behavior and
explicit TLS/SSL overrides
- clarify STARTTLS naming and sslTrust usage with examples in property
comments and the settings template
- default sslTrust to a wildcard when unset so TLS connections accept
any host by default unless tightened
## Testing
- ./gradlew :proprietary:test --tests
stirling.software.proprietary.security.service.MailConfigTest --console
plain
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_693864b2a6648328ae75c7e88a726a65)
## Summary
- add backend support for admins to reset user passwords and optionally
email notifications when SMTP is enabled
- surface mail capability in admin settings data for the UI
- add a shared change-password modal hooked into People and Team user
actions with random password generation and email options
## Testing
- not run (not requested)
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_6934b978fe3c83289b5b95dec79b3d38)
---------
Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com>
# Description of Changes
- Add new skeleton loader style type (block - nothing's currently using
it but it might as well be available)
- Make Dev API overridable (and set to the new docs that actually work
while Swagger docs don't work properly)
Fixes bug where SSO login with custom providers caused an
`InvalidClientRegistrationIdException: Invalid Client Registration with
Id: oidc` errors.
Root Cause:
- Backend: Redirect URI was hardcoded to `/login/oauth2/code/oidc`
regardless of provider registration ID
- Frontend: Unknown providers were mapped back to 'oidc' instead of
using actual provider ID
Closes#5141
---------
Co-authored-by: Anthony Stirling <77850077+frooodle@users.noreply.github.com>
Co-authored-by: Keon Chen <66115421+keonchennl@users.noreply.github.com>
Makes sure settings step collapses in results step
Makes sure result step doesn't always reset even in development for
baseTool
Make sure result step doesn't reset for convert
Custom processors can now return consume all inputs flag. This allows to
have many inputs to single output consumption
Fixed multi call conversion logic
## Summary
- add a shared hook that honors a `bypassOnboarding` query parameter and
marks onboarding steps as completed for the session
- block onboarding orchestrator and UI elements when the bypass flag is
present so tours and popups stay hidden
## Testing
- ./gradlew build
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_693059f866a8832891dd97f3d52ca5a0)
## Summary
- revert OCR ui-data endpoint to only expose language codes without
backend labels
- translate OCR language options on the frontend using existing lang.*
keys with locale-aware fallbacks
## Testing
- Not run (not requested)
------
[Codex
Task](https://chatgpt.com/codex/tasks/task_b_6928ae7c85448328a0d2660a0c021b22)
# Description of Changes
Start bundled backend instantly on startup of app and don't wait on it
being fully up to spawn app. This is techincally wasteful curently on
self-hosted mode where everything runs remotely, but in the future we'll
probably route simple operations to the local machine regardless of
connection, and it stops unnecessary waiting in the offline mode.
# Description of Changes
Fix#5017
Changes the handling of jwt tokens to be stored in local storage as well
as OS keyring so the rest of the app knows that you're logged in.
# Description of Changes
In the 2.0.0 release version, the frontend can't connect to the backend
on my machine because all the network requests 403. I think this is
because of CORS issues, and supposedly these will be fixed by using a
different Spring function, which is more lenient on URL schemes (needs
to allow `tauri://localhost` here, which isn't a standard URL)
Removed current plan section from static plan to match connected version
stripe publishable key not required to show plans or checkout in hosted
version
lazy load plans when needed not on load
# Description of Changes
Fixes two distinct but related issues in the backend of the desktop app:
- Correctly shows tools as unavaialable when the backend doesn't have
the dependencies or has disabled them etc. (same as web version - this
primarily didn't work on desktop because the app spawns before the
backend is running)
- Fixes infinite re-rendering issues caused by the app polling whether
the backend is healthy or not
# Description of Changes
- ~Force classic logo~
- Refer to email instead of username in SaaS sign in flow
- Allow drag-and-drop files into desktop app
- Convert terminology & icons from upload/download to open/save in
desktop version
### Description of Changes
This Pull Request was automatically generated to synchronize updates to
translation files and documentation for the **V2 branch**. Below are the
details of the changes made:
#### **1. Synchronization of Translation Files**
- Updated translation files
(`frontend/public/locales/*/translation.json`) to reflect changes in the
reference file `en-GB/translation.json`.
- Ensured consistency and synchronization across all supported language
files.
- Highlighted any missing or incomplete translations.
#### **2. Update README.md**
- Generated the translation progress table in `README.md`.
- Added a summary of the current translation status for all supported
languages.
- Included up-to-date statistics on translation coverage.
#### **Why these changes are necessary**
- Keeps translation files aligned with the latest reference updates.
- Ensures the documentation reflects the current translation progress.
---
Auto-generated by [create-pull-request][1].
[1]: https://github.com/peter-evans/create-pull-request
Co-authored-by: stirlingbot[bot] <195170888+stirlingbot[bot]@users.noreply.github.com>
- [ ] I have updated relevant docs on [Stirling-PDF's doc repo](https://github.com/Stirling-Tools/Stirling-Tools.github.io/blob/main/docs/) (if functionality has heavily changed)
- [ ] I have read the section [Add New Translation Tags](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/devGuide/HowToAddNewLanguage.md#add-new-translation-tags) (for new translation tags only)
### Translations (if applicable)
- [ ] I ran [`scripts/counter_translation.py`](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/docs/counter_translation.md)
### UI Changes (if applicable)
- [ ] Screenshots or videos demonstrating the UI changes are attached (e.g., as comments or direct attachments in the PR)
f" - **_Mismatched line count_**: {reference_line_count} (reference) vs {current_line_count} (current). Comments, empty lines, or translation strings are missing."
)
elifreference_line_count<current_line_count:
report.append(
f" - **_Too many lines_**: {reference_line_count} (reference) vs {current_line_count} (current). Please verify if there is an additional line that needs to be removed."
f"@{actor} please check your translation if it conforms to the standard. Follow the format of [messages_en_GB.properties](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/app/core/src/main/resources/messages_en_GB.properties)"
f"@{actor} please check your translation if it conforms to the standard. Follow the format of [en-GB/translation.json](https://github.com/Stirling-Tools/Stirling-PDF/blob/V2/frontend/public/locales/en-GB/translation.json)"
f"@{actor} please check your translation if it conforms to the standard. Follow the format of [en-GB/translation.toml](https://github.com/Stirling-Tools/Stirling-PDF/blob/main/frontend/public/locales/en-GB/translation.toml)"
body: `🚀 **Auto-deploying V2 version** for PR #${prNumber}...\n\n_This is an automated deployment triggered by V2/version2 keywords in the PR title or V2/React keywords in the branch name._\n\n⚠️ **Note:** If new commits are pushed during deployment, this build will be cancelled and replaced with the latest version.`
body: `🚀 **Auto-deploying V2 version** for PR #${prNumber}...\n\n_This is an automated deployment for approved V2 contributors._\n\n⚠️ **Note:** If new commits are pushed during deployment, this build will be cancelled and replaced with the latest version.`
body: "The Python code in your PR has formatting/linting issues. Consider running `make fix` locally or setting up your editor's Ruff integration to auto-format and lint your files as you go, or commit the suggested changes on this PR.",
});
- name:Verify fixer changes are committed
if:steps.fixer_changes.outputs.changed == 'true'
run:|
if ! git diff --exit-code; then
echo "Fixes are out of date."
echo "Apply the reviewdog suggestions or run 'make fix' from engine/ and commit the updated files."
This Pull Request was automatically generated to synchronize updates to translation files and documentation. Below are the details of the changes made:
#### **1. Synchronization of Translation Files**
- Updated translation files (`messages_*.properties`) to reflect changes in the reference file `messages_en_GB.properties`.
- Ensured consistency and synchronization across all supported language files.
- Highlighted any missing or incomplete translations.
#### **2. Update README.md**
- Generated the translation progress table in `README.md`.
- Added a summary of the current translation status for all supported languages.
- Included up-to-date statistics on translation coverage.
#### **Why these changes are necessary**
- Keeps translation files aligned with the latest reference updates.
- Ensures the documentation reflects the current translation progress.
This Pull Request was automatically generated to synchronize updates to translation files and documentation for the **V2 branch**. Below are the details of the changes made:
This Pull Request was automatically generated to synchronize updates to translation files and documentation. Below are the details of the changes made:
#### **1. Synchronization of Translation Files**
- Updated translation files (`frontend/public/locales/*/translation.json`) to reflect changes in the reference file `en-GB/translation.json`.
- Updated translation files (`frontend/public/locales/*/translation.toml`) to reflect changes in the reference file `en-GB/translation.toml`.
- Ensured consistency and synchronization across all supported language files.
- Highlighted any missing or incomplete translations.
- **Format**: TOML
#### **2. Update README.md**
- Generated the translation progress table in `README.md`.
- Generated the translation progress table in `README.md` using `counter_translation_v3.py`.
- Added a summary of the current translation status for all supported languages.
- Included up-to-date statistics on translation coverage.
- **Focus on benefits** - explain what the user gains, not how it works internally
- **Use concrete examples** - "text boxes become regular text" vs "form fields are flattened"
- **Answer user questions** - "What does this do?", "When should I use this?", "What's this option for?"
- **Keep descriptions concise** - 1-2 sentences maximum per section
- **Use bullet points** for multiple benefits or features
## 6. Migration from Thymeleaf
When migrating existing Thymeleaf templates:
1.**Identify Form Parameters**: Look at the original `<form>` inputs to determine parameter structure
2.**Extract Translation Keys**: Find `#{key.name}` references and add them to JSON translations (For many tools these translations will already exist but some parts will be missing)
3.**Map API Endpoint**: Note the `th:action` URL for the operation hook
4.**Preserve Functionality**: Ensure all original form behaviour is replicated which is applicable to V2 react UI
## 7. Testing Your Tool
## 6. Testing Your Tool
- Verify tool appears in UI with correct icon and description
- **Example compose files**: Located in `exampleYmlFiles/` directory
### Security Mode Development
Set `DOCKER_ENABLE_SECURITY=true` environment variable to enable security features during development. This is required for testing the full version locally.
### Python Development
Development for the AI engine happens in the `engine/` folder. The frontend calls the Python via Java as a proxy.
- Follow the engine-specific guidance in [engine/AGENTS.md](engine/AGENTS.md) for Python architecture, code style, and AI usage.
- Use Makefile commands for Python work:
- From `engine/`: `make check` to lint, type-check, test, etc. and `make fix` to fix easily fixable linting and formatting issues.
- The project structure is defined in `engine/pyproject.toml`. Any new dependencies should be listed there, followed by running `make install`.
### Frontend Development
- **Frontend dev server**: `cd frontend && npm run dev` (requires backend on localhost:8080)
- Building layer-specific override that wraps a lower layer's component
- Example: `import { AppProviders as CoreAppProviders } from "@core/components/AppProviders"` when creating proprietary/AppProviders.tsx that extends the core version
The `@app/*` alias automatically resolves to the correct layer based on build target (core/proprietary/desktop) and handles the fallback cascade.
#### Component Override Pattern (Stub/Shadow)
Use this pattern for desktop-specific or proprietary-specific features WITHOUT runtime checks or conditionals.
**How it works:**
1. Core defines stub component (returns null or no-op)
2. Desktop/proprietary overrides with same path/name
3. Core imports via `@app/*` - higher layer "shadows" core in those builds
4. No `@ts-ignore`, no `isTauri()` checks, no runtime conditionals!
- **Example compose files**: Located in `exampleYmlFiles/` directory
### Security Mode Development
Set `DOCKER_ENABLE_SECURITY=true` environment variable to enable security features during development. This is required for testing the full version locally.
### Frontend Development
- **Frontend dev server**: `cd frontend && npm run dev` (requires backend on localhost:8080)
Stirling-PDF is a robust, locally hosted, web-based PDF manipulation tool. **Stirling 2.0** represents a complete frontend rewrite, replacing the legacy Thymeleaf-based UI with a modern React SPA (Single Page Application).
Stirling-PDF is a robust, locally hosted, web-based PDF manipulation tool. **Stirling 2.0** represents a complete frontend rewrite with a modern React SPA (Single Page Application).
This guide focuses on developing for Stirling 2.0, including both the React frontend and Spring Boot backend development workflows.
@@ -11,7 +11,7 @@ This guide focuses on developing for Stirling 2.0, including both the React fron
**Stirling 2.0** is built using:
**Backend:**
- Spring Boot (Java 17+, JDK 21 recommended)
- Spring Boot (Java 21+, JDK 25 recommended)
- PDFBox for core PDF operations
- LibreOffice for document conversions
- qpdf for PDF optimization
@@ -38,16 +38,13 @@ This guide focuses on developing for Stirling 2.0, including both the React fron
- PDF file association support
- Self-contained JRE bundling with JLink
**Legacy (reference only during development):**
- Thymeleaf templates (being completely replaced in 2.0)
## 3. Development Environment Setup
### Prerequisites
- Docker
- Git
- Java JDK 17 or later (JDK 21 recommended)
- Java JDK 21 or later (JDK 25 recommended)
- Node.js 18+ and npm (required for frontend development)
- Gradle 7.0 or later (Included within the repo)
- Rust and Cargo (required for Tauri desktop app development)
@@ -62,7 +59,7 @@ This guide focuses on developing for Stirling 2.0, including both the React fron
cd Stirling-PDF
```
2. Install Docker and JDK17 if not already installed.
2. Install Docker and JDK 21 (or JDK 25 recommended) if not already installed.
3. Install a recommended Java IDE such as Eclipse, IntelliJ, or VSCode
@@ -309,7 +302,6 @@ For quick iterations and development of Java backend, JavaScript, and UI compone
- RESTful API endpoints
- JavaScript functionality
- User interface components and styling
- Thymeleaf templates
To run Stirling-PDF locally:
@@ -401,7 +393,7 @@ Remember to test your changes thoroughly to ensure they don't break any existing
### React Component Development (Stirling 2.0)
For Stirling 2.0, new features are built as React components instead of Thymeleaf templates:
For Stirling 2.0, new features are built as React components:
#### Creating a New Tool Component
@@ -448,61 +440,6 @@ For Stirling 2.0, new features are built as React components instead of Thymelea
3. **Register in Tool Picker:**
Update the tool picker component to include the new tool with proper routing and URL parameter support.
### Legacy Reference: Overview of Thymeleaf
Thymeleaf is a server-side Java HTML template engine. It is used in Stirling-PDF to render dynamic web pages. Thymeleaf integrates heavily with Spring Boot.
### Thymeleaf overview
In Stirling-PDF, Thymeleaf is used to create HTML templates that are rendered on the server side. These templates are located in the `stirling-pdf/src/main/resources/templates` directory. Thymeleaf templates use a combination of HTML and special Thymeleaf attributes to dynamically generate content.
Where it uses the `th:block`, `th:` indicating it's a special Thymeleaf element to be used server-side in generating the HTML, and block being the actual element type.
In this case, we are inserting the `navbar` entry within the `fragments/navbar.html` fragment into the `th:block` element.
Which is the same as above but passes the parameters title and header into the fragment `common.html` to be used in its HTML generation.
Thymeleaf can also be used to loop through objects or pass things from the Java side into the HTML side.
```java
@GetMapping
public String newFeaturePage(Model model) {
model.addAttribute("exampleData", exampleData);
return "new-feature";
}
```
In the above example, if exampleData is a list of plain java objects of class Person and within it, you had id, name, age, etc. You can reference it like so
```html
<tbody>
<!-- Use th:each to iterate over the list -->
<tr th:each="person : ${exampleData}">
<td th:text="${person.id}"></td>
<td th:text="${person.name}"></td>
<td th:text="${person.age}"></td>
<td th:text="${person.email}"></td>
</tr>
</tbody>
```
This would generate n entries of tr for each person in exampleData
### Adding a New Feature to the Backend (API)
1. **Create a New Controller:**
@@ -527,7 +464,7 @@ This would generate n entries of tr for each person in exampleData
@GetMapping
@Operation(summary = "New Feature", description = "This is a new feature endpoint.")
public String newFeature() {
return "NewFeatureResponse"; // This refers to the NewFeatureResponse.html template presenting the user with the generated html from that file when they navigate to /api/v1/new-feature
return "NewFeatureResponse";
}
}
```
@@ -582,91 +519,6 @@ This would generate n entries of tr for each person in exampleData
}
```
### Adding a New Feature to the Frontend (UI)
1. **Create a New Thymeleaf Template:**
- Create a new HTML file in the `stirling-pdf/src/main/resources/templates` directory.
- Use Thymeleaf attributes to dynamically generate content.
- Use `extract-page.html` as a base example for the HTML template, which is useful to ensure importing of the general layout, navbar, and footer.
## Adding New Translations to Existing Language Files in Stirling-PDF
When adding a new feature or modifying existing ones in Stirling-PDF, you'll need to add new translation entries to the existing language files. Here's a step-by-step guide:
@@ -696,15 +548,4 @@ pdfSplitter.input.pages=Enter page numbers to split
Add these entries to the default GB language file and any others you wish, translating the values as appropriate for each language.
### 3. Use Translations in Thymeleaf Templates
In your Thymeleaf templates, use the `#{key}` syntax to reference the new translations:
The File Sharing feature enables users to store files server-side and share them with other registered users or via token-based share links. Files are stored using a pluggable storage provider (local filesystem or database) with optional quota enforcement.
- Two share types, distinguished by which fields are set:
- **User share**: `shared_with_user_id` is set, `share_token` is null
- **Link share**: `share_token` is set (UUID), `shared_with_user_id` is null
-`access_role` — `EDITOR`, `COMMENTER`, or `VIEWER`
-`expires_at` — nullable expiration for link shares
-`workflow_participant_id` — when set, marks this as a **workflow share** (hidden from the file manager, accessible only via workflow endpoints)
**`file_share_accesses`**
- One record per access event on a share link
- Tracks: user, share link, access type (`VIEW` or `DOWNLOAD`), timestamp
**`storage_cleanup_entries`**
- Queue of storage keys to be deleted asynchronously
- Used when a file is deleted but the physical storage object cleanup is deferred
### Access Roles
| Role | Can Read | Can Write |
|------|----------|-----------|
| `EDITOR` | ✅ | ✅ |
| `COMMENTER` | ✅ | ❌ |
| `VIEWER` | ✅ | ❌ |
Default role when none is specified: `EDITOR`.
Owners always have full access regardless of role.
#### Role Semantics: COMMENTER vs VIEWER
In the file storage layer, `COMMENTER` and `VIEWER` are equivalent — both grant read-only access and neither can replace file content. The distinction is meaningful in the **signing workflow** context:
| Context | COMMENTER | VIEWER |
|---------|-----------|--------|
| File storage | Read only (same as VIEWER) | Read only |
| Signing workflow | Can submit a signing action | Read only |
`WorkflowParticipant.canEdit()` returns `true` for `COMMENTER` (and `EDITOR`) roles, which the signing workflow uses to determine if a participant can still submit a signature. Once a participant has signed or declined, their effective role is automatically downgraded to `VIEWER` regardless of their configured role.
The rationale: "annotating" a document (submitting a signature) is not the same as "replacing" it. COMMENTER grants annotation rights without file-replacement rights.
### Backend Architecture
#### Service Layer
**FileStorageService** (`1137 lines`)
- Core file management service
- Upload, update, download, and delete operations
- User share management (share, revoke, leave)
- Link share management (create, revoke, access)
- Access recording and listing
- Storage quota enforcement
- Configuration feature gate checks
**StorageCleanupService**
- Scheduled daily: deletes orphaned storage keys from `storage_cleanup_entries`
- Scheduled daily: purges expired share links from `file_shares`
- Processes cleanup in batches of 50 entries
#### Storage Providers
**LocalStorageProvider**
- Files stored on the filesystem under `storage.local.basePath` (default: `./storage`)
- Storage key is a path relative to the base directory
**DatabaseStorageProvider**
- Files stored as BLOBs in `stored_file_blobs` table
- No filesystem dependency
Provider is selected at startup via `storage.provider: local | database`.
#### Controller Layer
**FileStorageController** (`/api/v1/storage`)
- All endpoints require authentication
- File CRUD and sharing operations
### Data Flow
```
User uploads file → StorageProvider stores bytes → StoredFile record created
↓
Owner shares file → FileShare record created (user or link)
↓
Recipient accesses file → Access recorded → File bytes streamed
```
## File Operations
### Upload File
```bash
POST /api/v1/storage/files
Content-Type: multipart/form-data
file: document.pdf # Required — main file
historyBundle: history.json # Optional — version history
auditLog: audit.json # Optional — audit trail
```
**Response:**
```json
{
"id":42,
"fileName":"document.pdf",
"contentType":"application/pdf",
"sizeBytes":102400,
"owner":"alice",
"ownedByCurrentUser":true,
"accessRole":"editor",
"createdAt":"2025-01-01T12:00:00",
"updatedAt":"2025-01-01T12:00:00",
"sharedWithUsers":[],
"sharedUsers":[],
"shareLinks":[]
}
```
### Update File
Replaces the file content. Only the owner can update.
```bash
PUT /api/v1/storage/files/{fileId}
Content-Type: multipart/form-data
file: document_v2.pdf
historyBundle: history.json # Optional
auditLog: audit.json # Optional
```
### List Files
Returns all files owned by or shared with the current user. Workflow-shared files (signing participants) are excluded — those are accessible via signing endpoints only.
```bash
GET /api/v1/storage/files
```
Response is sorted by `createdAt` descending.
### Download File
```bash
GET /api/v1/storage/files/{fileId}/download?inline=false
Only the owner can delete. All associated share links and their access records are deleted first, then the database record, then the physical storage object.
```bash
DELETE /api/v1/storage/files/{fileId}
```
## Sharing Operations
### Share with User
```bash
POST /api/v1/storage/files/{fileId}/shares/users
Content-Type: application/json
{
"username": "bob", # Username or email address
"accessRole": "editor"# "editor", "commenter", or "viewer" (default: "editor")
}
```
**Behaviour:**
- If the target user exists: creates/updates a `FileShare` with `sharedWithUser` set
- If `username` is an email address and the user doesn't exist: creates a share link and sends a notification email (requires `sharing.emailEnabled` and `sharing.linkEnabled`)
Authentication is required (even for share links). Anonymous access is not permitted.
```bash
GET /api/v1/storage/share-links/{token}?inline=false
```
- Returns 401 if unauthenticated
- Returns 403 if authenticated but link doesn't permit access
- Returns 410 if the link has expired
- Records a `FileShareAccess` entry on success
> **Token-as-credential semantics:** Any authenticated user who holds the token can access the file — the token is the credential. If you need per-user access control (only a specific person can open it), use "Share with User" instead. Share links are appropriate for broader distribution where possession of the token implies authorization.
### Get Share Link Metadata
```bash
GET /api/v1/storage/share-links/{token}/metadata
```
Returns file name, owner, access role, creation/expiry timestamps, and whether the current user owns the file.
### List Accessed Share Links
Returns the most recent access for each non-expired share link the current user has accessed.
```bash
GET /api/v1/storage/share-links/accessed
```
### List Accesses for a Link (Owner Only)
```bash
GET /api/v1/storage/files/{fileId}/shares/links/{token}/accesses
```
Returns per-user access history (username, VIEW/DOWNLOAD, timestamp), sorted descending by time.
## Workflow Share Integration
Signing workflow participants access documents via their own `WorkflowParticipant.shareToken`. No `FileShare` record is created for participants; access control is self-contained in the `WorkflowParticipant` entity.
The `FileShare.workflow_participant_id` column and the `FileShare.isWorkflowShare()` method are **deprecated**. Legacy data (sessions created before this change) may still have `FileShare` records with `workflow_participant_id` set, which continue to work via the existing token lookup path in `UnifiedAccessControlService`. No new records are created.
`GET /api/v1/storage/files` returns all files owned by or shared with the current user (via `FileShare`). Signing-session PDFs use the `file_purpose` field (`SIGNING_ORIGINAL`, `SIGNING_SIGNED`, etc.) to distinguish them from generic files. The file manager UI can filter on this field if needed.
## API Reference
| Method | Endpoint | Description | Auth |
|--------|----------|-------------|------|
| POST | `/api/v1/storage/files` | Upload file | Required |
- All endpoints require authentication — there is no anonymous access
- Owner-only operations enforced in service layer (not just controller)
-`requireReadAccess` / `requireEditorAccess` checked on every download
### Share Link Security
- Tokens are UUIDs (random, not guessable)
- Expiration enforced on every access
- Expired links return HTTP 410 Gone
- Revoked links delete all access records
### Quota Enforcement
- Checked before storing (not after)
- Accounts for existing file size when replacing (only the delta counts)
- Covers main file + history bundle + audit log in a single check
## Automatic Cleanup
`StorageCleanupService` runs two scheduled jobs daily:
1.**Orphaned storage cleanup** — processes up to 50 `StorageCleanupEntry` records, deletes the physical storage object, then removes the entry. Failed attempts increment `attemptCount` for retry.
2.**Expired share link cleanup** — deletes all `FileShare` records where `expiresAt` is in the past and `shareToken` is set.
## Troubleshooting
**"Storage is disabled":**
- Check `storage.enabled: true` in settings
- Verify `security.enableLogin: true`
**"Share links are disabled":**
- Check `sharing.linkEnabled: true`
- Verify `system.frontendUrl` is set and non-empty
**"Email sharing is disabled":**
- Check `sharing.emailEnabled: true`
- Verify `mail.enabled: true` and mail configuration
**Signing-session PDF appearing in the general file list:**
- This is expected — signing PDFs are accessible to owners and shared users
- Filter by `file_purpose` (`SIGNING_ORIGINAL`, `SIGNING_SIGNED`) in the UI to distinguish them
**Share link returns 410:**
- Link has expired — check `expires_at` in `file_shares` table
[](https://cloud.digitalocean.com/apps/new?repo=https://github.com/Stirling-Tools/Stirling-PDF/tree/digitalOcean&refcode=c3210994b1af)
Stirling PDF is a powerful, open-source PDF editing platform. Run it as a personal desktop app, in the browser, or deploy it on your own servers with a private API. Edit, sign, redact, convert, and automate PDFs without sending documents to external services.
[Stirling-PDF](https://www.stirlingpdf.com) is a robust, locally hosted web-based PDF manipulation tool using Docker. It enables you to carry out various operations on PDF files, including splitting, merging, converting, reorganizing, adding images, rotating, compressing, and more. This locally hosted web application has evolved to encompass a comprehensive set of features, addressing all your PDF requirements.
All files and PDFs exist either exclusively on the client side, reside in server memory only during task execution, or temporarily reside in a file solely for the execution of the task. Any file downloaded by the user will have been deleted from the server by that point.
All documentation available at [https://docs.stirlingpdf.com/](https://docs.stirlingpdf.com/)
- **Everywhere you work** - Desktop client, browser UI, and self-hosted server with a private API.
- **50+ PDF tools** - Edit, merge, split, sign, redact, convert, OCR, compress, and more.
- **Automation & workflows** - No-code pipelines direct in UI with APIs to process millions of PDFs.
- **Enterprise‑grade** - SSO, auditing, and flexible on‑prem deployments.
- **Developer platform** - REST APIs available for nearly all tools to integrate into your existing systems.
- **Global UI** - Interface available in 40+ languages.
For a full feature list, see the docs: **https://docs.stirlingpdf.com**
## Features
## Quick Start
- 50+ PDF Operations
- Parallel file processing and downloads
- Dark mode support
- Custom download options
- Custom 'Pipelines' to run multiple features in a automated queue
- API for integration with external scripts
- Optional Login and Authentication support (see [here](https://docs.stirlingpdf.com/Advanced%20Configuration/System%20and%20Security) for documentation)
- Database Backup and Import (see [here](https://docs.stirlingpdf.com/Advanced%20Configuration/DATABASE) for documentation)
- Enterprise features like SSO (see [here](https://docs.stirlingpdf.com/Advanced%20Configuration/Single%20Sign-On%20Configuration) for documentation)
```bash
docker run -p 8080:8080 docker.stirlingpdf.com/stirlingtools/stirling-pdf
```
## PDF Features
Then open: http://localhost:8080
### Page Operations
For full installation options (including desktop and Kubernetes), see our [Documentation Guide](https://docs.stirlingpdf.com/#documentation-guide).
- View and modify PDFs - View multi-page PDFs with custom viewing, sorting, and searching. Plus, on-page edit features like annotating, drawing, and adding text and images. (Using PDF.js with Joxit and Liberation fonts)
- Full interactive GUI for merging/splitting/rotating/moving PDFs and their pages
- Merge multiple PDFs into a single resultant file
- Split PDFs into multiple files at specified page numbers or extract all pages as individual files
- Reorganize PDF pages into different orders
- Rotate PDFs in 90-degree increments
- Remove pages
- Multi-page layout (format PDFs into a multi-paged page)
- Scale page contents size by set percentage
- Adjust contrast
- Crop PDF
- Auto-split PDF (with physically scanned page dividers)
The Shared Signing feature enables collaborative document signing workflows where a document owner can request signatures from multiple participants. Each participant receives a secure token to access the document, submit their digital signature (with optional wet signature overlay), and track the signing progress.
**Key Capabilities:**
- Multi-participant signing sessions
- Digital certificate signatures (P12/PKCS12, JKS, SERVER, USER_CERT, PEM/UPLOAD)
- Visual wet signature overlays (drawn, typed, or uploaded) — multiple per participant
- Token-based participant access (no authentication required for participants)
- Authenticated participant access for registered users via sign-requests API
- Progress tracking for session owners
- Optional signature summary page appended to finalized PDF
- Automatic role downgrade after signing (security)
- GDPR-compliant wet signature metadata cleanup
## Architecture
### Database Schema
#### Core Tables
**`workflow_sessions`**
- Tracks signing sessions created by document owners
- Links to original and processed (signed) PDF files
- Stores session metadata (message, due date, status)
-`NOTIFIED` status is reserved for a future email notification feature; no current code path sets it
- Stores participant-specific metadata (certificates, wet signatures) as JSONB
- Each participant holds their own `shareToken` (UUID) for token-based access — no separate `FileShare` record is created
-`accessRole` controls what actions the participant can perform. `COMMENTER` (and `EDITOR`) allow submitting a signature; `VIEWER` does not. After signing/declining, effective role is automatically downgraded to `VIEWER`
**`user_server_certificates`**
- Stores auto-generated certificates per user
- Enables "Use My Personal Certificate" option
#### Extended Tables
**`stored_files`**
- Added `workflow_session_id` to link files to signing sessions
2. **Append Summary Page (optional, before digital signing)**
If `includeSummaryPage=true`, a new A4 page is appended showing:
- Stirling logo and "Signature Summary" title
- Document name and session owner
- Finalization timestamp
- Per-participant: name, email, status, signed timestamp, reason, location, certificate type
- Supports overflow to additional pages
This step occurs **before** digital certificate signing so signatures are not invalidated.
When a summary page is added, the visual digital signature block (`showSignature`) is suppressed — wet signatures (hand-drawn overlays) are unaffected.
3. **Apply Digital Certificates (in participant order)**
- ✅ Visual wet signature overlays (multiple per participant)
- ✅ Token-based security for unauthenticated participants
- ✅ Authenticated participant access via sign-requests API
- ✅ Automatic role management
- ✅ Large file support (100GB+)
- ✅ GDPR-compliant wet signature metadata cleanup
- ✅ Real-time progress updates
- ✅ Full frontend integration with Quick Access Bar
- ✅ Optional signature summary page with logo and participant details
The architecture leverages existing file sharing infrastructure while adding workflow-specific features, ensuring consistency and maintainability across the application.
@@ -5,6 +5,8 @@ public interface UserServiceInterface {
StringgetCurrentUsername();
StringgetCurrentUserApiKey();
longgetTotalUsersCount();
booleanisCurrentUserAdmin();
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
